Estimate for Augmentation Renovation of water supply scheme including Functional House Hold Tap Connection at Village Bir Babran Distt Hisar

Amount

GI SPECIALS/G I ELBOW / GI elbow providing and fixing GI Elbow 15mm complete in all respect / GI ELBOW

GI SPECIALS/G I NIPPLE / PROVIDING AND FIXING GI NIPPLE 15 X 50 MM COMPLETE IN ALL RESPECT. /15 X 50 MM

MACHINERY ITEMS/MISCELLANEOUS MACHINERY / Supply & Erection if Horizontal spindle split casing type pumping sets of minimum Four (4) Star rating duties directly coupled to AC squirrel cage induction type motor with 1440 RPM, 3 Phase, 50 HZ and accessories as described in Schedule No.II complete in all respect with priming arrangement with complete base frame.Clear Water Pump set 1 No. at Boosting Station 700 LPM, 25 mtr head 7.5 BHP / 700 LPM, 25 MTR HEAD, 7.5 BHP HORIZONTAL CLEAR WATER PUMP SET

MISCELLANEOUS ITEMS/NUT AND BOLT / S/F CI special 100mm to 400mm such as tee. bend, tail piece & reducer etc. / S/F CI SPECIAL 100MM TO 400MM SUCH AS TEE, BEND, TAIL PIECE and REDUCER ETC

CI SPECIALS/CI D/F PIPES / Supply and fixing following CI D/F pipe and specials/ bell mouth/ including cost of joining materials laying jointing, refilling of including making adequate support of masonry/ concrete for delivery and suction pipe from bell mouth in collecting tank upto the rising main laid by the department as per plan shown from the foundation wall of pump chamber for all the raw water and clear water pumping sets at water works in position as per specification given in schedule No.II. /150 MM

MACHINERY ITEMS/MISCELLANEOUS MACHINERY / Supply, erection, testing and commissioning of Wall mounted electrical panel board , fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200 x 900mm having following items : at B/S a) For clear water pump sets for 700 Lpm x 25 M head = 1 No. a) Main switch 63 Amp 1 No.(L&T, Siemens, ABB) b) Volt meter 100 x 100mm range 0 to 500 volt 1 No.(AE/KAPPA/L&T) c) Amp meter 100x100mm range 0 to 100 Amp 2 Nos(AE/KAPPA/L&T) d) CT 100/3 1 No (AE/KAPPA/L&T) e) VSS 1 No. & ASS 1 No. of approved make f) SPP 1 No. of approved make g) Motor starter, star delta, 1 No. for 700 LPM x 25 M Head Motor (L&T Siemens, AAB) h) Capacetor of suitable capacity = 1 No i) Indicating Lamp-One set j) Change over switch 63 Amp = 1 No /PANEL BOARD, SUNDWA, FLANGE, CABLE ETC ON RENT BASIS

MISCELLANEOUS ITEMS/MISC. ITEMS / Supply erection, testing of ISI marked copper wire for 1 No motors with under ground system in PVC and flexible pipes copper wire size 6mm Sq mm complete in all respects with accessories like thimble etc. / ELECTRIC ITEM

ELECTRICAL ITEMS/EXHAUST FAN / Providing and fixing New Fan Havels 50 Watt complete all respect /NEW FAN

ELECTRICAL ITEMS/CEILING FAN / Providing and fixing Ceilling fan 1200mm (48") with speed adjuter of reputed make (Make Crompton, Usha, Bajaj, Orient) complete in all respect. / CEILING FAN 1200MM

Bidder Name

Amount

KAMAL KANT CONTRACTOR(GSTN-06BGYPK6134L1ZQ)

Sushilkumar Contractor(GSTN-NA)

Jitender Kumar Contractor(GSTN-NA)

VINOD KUMAR CONTRACTOR(GSTN-NA)

KANSHI RAM CONTRACTOR(GSTN-NA)

SANDEEP KUMAR CONTRACTOR(GSTN-NA)

SANDEEP KUMAR CONTRACTOR

Sushilkumar Contractor

KAMAL KANT CONTRACTOR

KANSHI RAM CONTRACTOR

Jitender Kumar Contractor

KAMAL KANT CONTRACTOR

VINOD KUMAR CONTRACTOR

SANDEEP KUMAR CONTRACTOR

KANSHI RAM CONTRACTOR

Jitender Kumar Contractor