Karnataka

To Be Opened

Works

Electrical

Providing internal electrification wall mounting fan and modular LED fittings to newly constructed Sri.Chenna Keshava Swamy Samudaya Bavana building at Kaidala Tumkur taluk.

Public Works Department

PWD Electrical Division Office Bengaluru | Bengaluru Urban, Karnataka

Amount: ₹8.5 LCloses: 21 Aug 2026Closed

Timeline

Published7 Aug 2026
Closed21 Aug 2026
Bid Opening24 Aug 2026

Tender Value

₹8.5 L

EMD Value

₹21,200

Closing Date

21 Aug 2026, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

Gangaraju G AEE-Rural Electrical Sub Division

Mobile Number

Work Description

Providing internal electrification wall mounting fan and modular LED fittings to newly constructed Sri.Chenna Keshava Swamy Samudaya Bavana building at Kaidala Tumkur taluk.

Tender Information

Tender ID

PWD/2026-27/EL/WORK_INDENT37611

Reference Number

PWD/2026-27/EL/WORK_INDENT37611

Tender Type

Open

Product Category

Electrical

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD Electrical Division Office Bengaluru

Source Website

Subscribe to view

Documents Required

5 documents required · 5 mandatory

Technical Bid

RequiredClass 3 and Above Electrical Inspectorate Registration Certificates

RequiredBalance Sheet & Profit and Loss Statement certified by a Registered Charted Account

RequiredWork done certificate issued by an officer not below the rank of Executive Engineer/ Equivalent.

RequiredOngoing and existing commitments details

RequiredBid capacity

Eligibility Criteria

Tenders from Joint ventures are not acceptable

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by any State Government / Government of India /Union Territory.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

The intending contractors are requested to note that, they should abide by the detailed instructions and conditions contained in the KW-1 tender document and further documents there on.

It is the responsibility of the licensed electrical contractor who executes the works to get services of the installations from the concerned Service Electricity Companies duly obtaining approval from the govt. electrical inspectorate as the case may be. However the department will pay the deposit/statutory fees if any after hearing the respective statutory bodies.

The responsibility of safe custody of electrical equipments/ materials, etc., shall be with the contractor until they are finally handed over to the Department.

The Tender shall bear all costs associated with the preparation and submission of his Tender, and the employer will in no case be responsible and liable for those costs.

Tenderer has to handover all the completed work to the respective authority and furnish the acknowledgement for the same before submission of final bill.

During the execution of, any Minor Civil works or any other works are to be executed it has to be done by the Reputed firms/Tenderer, from his end without any charges. Also he should work in coordination with the civil works.

The Tenderer shall not damage the existing building, while execution of electrical works.

The tenderer shall obtain the work done certificate in the prescribed format from the competent Authority Executive Engineer (District level Officer) and scan the original Certificate and attach the scanned file Certificate/ Certificates shall be produced at the time of opening of technical Bids for physical verification.

Whenever executing authority insist proof of having purchased the materials (used during executing the work) for verification. The contractor shall produce the purchase bills.

The Tenderer should furnish details of Works on Hand (Present Contract Commitment) must be enclosed separately.

The Employer reserves the right to reject any or all Tenders without assigning any reason.

The Department is not responsible for any delay in accessing e-procurement portal.

Clause 25.5 stipulates for tenderer to produce detailed rate analysis for various items if tender is seriously unbalanced. (i.e. where quoted rates are very high as well as where the quoted rates are less than estimated rated)

The bidders should submit the Bid capacity compulsorily. The details of balance work B value (works on hand & works for which tender submitted). Should be submitted in the prescribed format & should be signed by the concerned Executive Engineer / District level officer. In case the bidder does not furnish the above details/suppresses the actual facts/ produces false facts, along with the Technical bid, the technical bid of such bidder shall be considered for rejection.

The Tenderer must submit ongoing and existing commitments details separately.

The tenderer should furnish Name and Address Telephone Nos. Fax Nos. and email ID of the Tenderers Bankers detail

As per Karnataka State Government order No. LD/300/LET/2006 Bangalore Dated 01.01.2007 and G.No. PW/134/BMS/2007 Dt 27.7.2007, a sum amounting to 1% of the bill amount will be deducted welfare fund.

Conditional Tenders will not be accepted.

As per the Govt. Order No PW2BMS2019 Bangalore Dated 19-06-2019 the applicable GST shall be paid to the SR Items separately.

Technical Criteria

Past Experience

3.2To qualify for award of this contract, each tenderer in its name should have in the last Five years i.e. 2021-22 to 2025-26.b) Satisfactorily completed (at least 50% of the contract value), as prime contractor, at least one similar work i.e., Providing Electrification Works of value not less than Rs 4.24 Lakhs in a single work.

Others -- Others - Work done certificate issued by an officer not below the rank of Executive Engineer/ Equivalent

Capabilities of Vendor

The tenderer as a Prime Contractor having valid Class-3 & above Electrical License issued by Electrical Inspectorate Govt. of Karnataka and should have suitable technical, financial & managerial capabilities.

Others -- Electrical Inspectorate Licene

3.6Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under/ Assessed available tender capacity - (AxNx2.5-B) Where, A-Maximum value of construction works executed in any one year during the last five years (updated 2026-27 price level) taking into account the completed as well as works in progress. N Number of years prescribed for completion of the works for which tenders are invited. 0.25 Years (03 Months) B-Value, at 2026-27 price level, of existing commitments and on-going works to be completed during the next. 0.25 Years (03 Months) (period of completion of the works for which Tenders are invited) Note: The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.

Others -- Bid Capacity

Financial Status

3.2To qualify for award of this contract, each Tenderer in its name should have during last five years i.e., from 2021-22 to 2025-26.a) The tenders must have achieved in at least two financial years an average annual financial turnover of an amount Not less than Rs.8.48 Lakhs during last five years. With UDIN Number certified by Chartered Accountant, If Failed to Satisfy the condition tender will be rejected Note: The returns submitted to the I.T. along with the Profit and Loss account statement, Balance sheet should be uploaded for the financial turnover criteria.

Others -- Audited CA Certificate of Annual Turnover

Others

Nil

Others -- Nil

Nil

Others -- Nil

Work Locations

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹21,200

Important Dates

Last Activity

7 Aug 2026

Published

7 Aug 2026

Bid Opening

24 Aug 2026

Download Ends

13 Aug 2026

BOQ Preview

•

Sub estimate for Providing internal electrification wall mounting fan and modular LED fittings to newly constructed Sri.Chenna keshava Swamy samudaya bavana building at kaidala Tumkur taluk.

•

Supplying heavy gauge PVC conduit pipe .dia . mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling ...

•

Supplying PVC flexible conduit pipe 25mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF s...

•

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch ---- Items of work are including cost and conveyance of al...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Three Way socket ---- Items of work are including cost and conveyance of a...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.Stepped Fan Regulator Two Module ---- Items of work are including cost and co...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.32A DP Switch ---- Items of work are including cost and conveyance of all mat...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16A Universal Socket ---- Items of work are including cost and conveyance o...

•

Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- Items of work are including cost and conveyance of ...

•

Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire. ---- Items of work are inc...

•

Supplying wall mounting fan suitable to operate at single-phase 230v AC. supply. 400mm sweep ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work...

•

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball be...

•

Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of...

•

Supplying of .feet PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80.power input 220-240V at 50/60HZ & power factor...

•

Supplying of recess mounting non integrated type LED down light. W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clamps, LED of Power/COB with C...

•

Supplying of recess mounting non integral type . LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degree K, C...

•

Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, r...

•

Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...

•

Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires ---- Items of work are including cos...

•

Supplying, installation, testing and commissioning of solar hot water heater comprising of solar Flat Plate Collector (FPC) of size 2120x1040x100mm and stainless steel hot water storage tank with stai...

•

Supplying, fixing, wiring, earth electrode for grounding conduits I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should...

•

GI/Copper strips for grounding connections, using necessary fixing materials as required 25 x 3 mm GI strip ---- Items of work are including cost and conveyance of all materials, labour charges for al...

•

GI/Copper strips for grounding connections, using necessary fixing materials as required 25 x 3 mm Copper strip ---- Items of work are including cost and conveyance of all materials, labour charges fo...

•

Supplying of guy wire & GI wire 8swg GI wire(4.064mm dia) std wt: 131kg/m ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and ...

•

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

•

Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. (Open Execution)125A ---- Items of work are including cost and conveyance of all materials, labour charges for al...

•

Supplying .litres capacity vertical/horizontal type wall mounting Electrical water heater with 22 SWG copper/SS sheet metal inner Container tinned inside Fiber body outside, filled with glass wool bet...

•

Erection charges for fixing a up to 30. litres capacity wall mounting electric geysers using bolts, flat at one end nut and washers at the other end for through bolts and nuts and washers with 150x450...

•

Supplying & fixing of retrofit type - LED bulb . W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per W, life 25000 burning hours and Compliance...

•

Supplying & Fixing of 70-150 W lamp holder 2 Pine ---- Items of work are including cost and conveyance of all materials, labour charges for all items of work with all lead and lift, loading and unload...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KPPP kw-1 bid 37611.doc

Tender Document • 1.06 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Karnataka

To Be Opened

Works

Electrical

Providing internal electrification wall mounting fan and modular LED fittings to newly constructed Sri.Chenna Keshava Swamy Samudaya Bavana building at Kaidala Tumkur taluk.

Public Works Department

PWD Electrical Division Office Bengaluru | Bengaluru Urban, Karnataka

Amount: ₹8.5 LCloses: 21 Aug 2026Closed

Timeline

Published7 Aug 2026
Closed21 Aug 2026
Bid Opening24 Aug 2026