Supplying and installation of Furniture for USAP at East Delhi Campus

Amount

Providing and fixing of Engineering Drawing Table of size 1000mm Length * 750 MM width * 850 Height, The table top shall ne made of 18 mm thick with pre laminated board with 2 MM thick PVC edge bending on all sides, Under structure shall from square leg 40 mm *1.2 mm thick joint together with 25 * 25 *1.2 mm made of CRC tube, the foot rest made of CRCA sheet 1.0 MM thick, the complete frame is powder coated 50 +/- 10 microns. Note – Table top angle sheet 0 -60 Degree with knob, PVC shoe should be used in legs top avoid scratches on floor or as directed by Engineer-in-Charge.

Supplying & Placing revolving stool with hydraulic adjustable height with S Stop, 5 legs, foot-ring without casotrs with back. The seat shall be made of 12mm thick plyboard upholstered with high resilience polyurethane foam 40mm thick having density 40kg/m³ with leatherite tapestry 0.8mm thick and 535 GSM and the back shall be made of hot pressed plywood 12mm thick upholstered with high resilience polyurethane foam 25mm thick having density 32kg/m³ with leatherite tapestry 0.8mm thick and 535 GSM. The seat and back shall be fixed with metal frame and metal bright bar having dia. 12mm. The understructure shall consist of four legs made up of MS/CRCA chrome plated round pipe of Dia 19.05mm with 1.5mm thick. There shall be PPCP shoe provided at the base to avoid scratches on the floor. The Seat size shall be 400±10 mm(D)X400±10 mm(W) and back size shall be 400±10 mm(W)X440±10 mm(Ht) from seat. Overall height shall be = 740±10 mm, overall depth = 490±10 mm.

Providing and Placing in position table for Office with Back Unit. Overall size of the table shall be 1650 W x 750 D x 750 H & ERU 1200 W x 500 D x 750 H. The table is made of 25 mm thick MDF – one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. Soft closing access flap within-build power box are provided on work surface for wire management. The ERU top is made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The modesty panel is made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The under structure is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, edge banded with matching 2 mm thick PVC lipping. The pedestal is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top pedestal construction is BOX-BOX-FILE type which uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security. Overall size of the back unit shall be 1650 W mm x 500 D mm x 1150 H mm. The top panel shall be made of 25 mm thick MDF one side pre-laminate board with 0.4mm PVC membrane pressed on to top. The slide door unit shall be made of 25 mm Thick Pre-laminated twin board of E1-P2 grade and approved shade ,Edge banded with matching 2 mm thick PVC lipping for body panels like side, bottom, back and shelves. The shutters shall be made of 25 mm thick MDF one side pre-laminated board with 0.4mm PVC membrane pressed on to top. Shutters shall have a soft - closing & anti-slam mechanism. Handles shall be provided for ease of opening. Storage shall be provided with lock for security.

Providing and supplying high back chair with ergonomic design, comfortable & aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial plywood upholstered with high resilience polyurethane foam 40mm thick having density 32kg/m³ with foam net tapestry 0.9mm thick and 300 GSM and the back shall be made of injection moulded polypropylene net cover with breathable mesh tapestry. The backrest shall be made by keeping the natural curvature of the spine with adjustable contour lumbar support. The seat and back shall be arrested together with powder coated HR steel spine and The chair shall be supplied With 2-Way Adjustable PU Arm which is completely joint with seat. For seating durability the chair shall have synchro knee tilt 360 degree revolving mechanism with multiple position locking. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 120mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The pedestal should have five legged chrome base having pitch circle Dia. 700 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black nylon 30% glass filled, confirming to ANSI/BIFMA X5.1-2011 standard tested to perform 98,000 cycles with 250lbs load. The seat size shall be 490±10 mm(W) X 515±10 mm(D) and back size shall be 535±10 mm(W) X 650±10 mm(Ht) from seat. Overall height shall be = 1175±10 mm.

Providing and supplying visitor chair with ergonomic design for user comfort. The seat shall be made of 15mm thick hot pressed commercial plywood upholstered with high resilience polyurethane foam 40mm thick having density 32kg/m³ with foam net tapestry 0.9mm thick and 300 GSM and the back shall be made of injection moulded polypropylene net cover with breathable mesh tapestry. The backrest shall be made by keeping the natural curvature of the spine with adjustable contour lumbar support. The seat and back shall be arrested together with powder coated HR steel spine. The frame structure shall be cantilever support type made up of MS/CRCA powder coated with 50-60µ (DFT) thick round pipe of dia. 25.4mm with 2mm thick. There shall be PPCP shoe provided at the base to avoid scratches on the floor. The seat size shall be 490±10 mm(W) X 515±10 mm(D) and back size shall be 535±10 mm(W) X 650±10 mm(Ht) from seat.

Providing and Placing in position Plain Storwel for Storage. Overall size of the storwel shall be 916 mm (W) x 486 mm (D) x 1980 mm(H) with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The Store well Plain should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It shall have 4 no.s full shelves. A4 size box file(85 W x 285 D x 345 H mm) can be stored vertically on three shelves and the clear space above fourth shelf is 240mm. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available. There shall be 5 loading levels in storewel plain.

Supplying and placing Mid back chair. The seat shall be made of 15mm thick hot pressed plywood upholstered with high resilience moulded polyurethane foam having density 45kg/m³ with foam net tapestry 0.9mm thick and 300 GSM and the back shall be made of polypropylene net cover upholstered with breathable mesh tapestry. The seat and back shall be arrested together with HR steel spine and the armrest shall be used PP arm completely joint with seat. The chair shall have push back 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 100mm with BIFMA standard class-3 gas lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The pedestal should have five legged injection moulded in black nylon having pitch circle Dia. 650 mm fitted with 5 nos. twin wheel castors which shall be made of injection moulded in black nylon 30% glass filled. The seat size shall be 400±10 mm(D)X465±10 mm(W) and back size shall be 400±10 mm(W)X515±10 mm(Ht) from seat. Overall height shall be = 910±10 mm.

Providing and supplying display cabinet unit with an overall size 915 mm (W) X 320 mm (D) X 1750mm (H). The isplay cabinet unit shall be supplied with 4 nos. of individual compartments.

Providing and fixing of white cenamic writing board for class rooms of size 8' X 4' as per direction of engineer-in-charge.

Providing and fixing of pin up board / Notice board with glass cover and lock for class rooms of size 8' X 4' as per direction of engineer-in-charge.

Providing and fixing of pin up board / Notice board with glass cover and lock for class rooms of size 6' X 4' as per direction of engineer-in-charge.

Providing and fixing of pin up board / Notice board with glass cover and lock for class rooms of size 4' X 4' as per direction of engineer-in-charge.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. '5/6 amps switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. '15/16 amp switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. '3 pin 5/6 amp socket outlet

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. '6 pin 15/16 amp socket outlet

Supplying and fixing of commercial Dado Truncking NCT 1050 of overall diamensions 100 mm x 50 mm on the surface of wall etc. as required

S/F the following accessories for commercial Dado Trunking etc. as required.Internal coupler NCI1050WHI

S/F the following accessories for commercial Dado Trunking etc. as required. End cap mounded NEP 1050

Supplying and fixing the following module boxes in the existing commercial Dado Truncking of size 100 mm (H) x 50 mm (D) etc. as reuqired 8 module box NSB 8I

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.'3 x 1.5 sq. mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.'3 x 4 sq. mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. '6 x 4 sq. mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. '3 x 6 sq. mm

GEEKEN SEATING COLLECTION PVT LTD