Construction of New Special Maintenance Work Shop Building at 33-11 KV Nagai Urban Substation Premises

Amount

Earth work excavation and depositing on bank with initial lead of 10m and initial lift of 2m. for foundation as instructed by the Engineer incharge for the following items including cost of labour , etc.complete..

Supplying and filling the basement and foundation, with river sand , watering ,consolidation ,etc.,as instructed by the Engineer incharge. including cost of material, labour, lead, lift etc., complete

PCC 1:4:8 using 40m HB stone for foundation, flooring, etc.,in the following levels as instructed by the Engineer incharge including cost of all materials labour, lead lift , etc., complete.

RCC M20 (1:1.5:3)using 12-20mm HBG stone with out form work for foundation,columns, lintel, beam, roofslab, sunshade, etc., in the following levels as instructed by the Engineer incharge including cost of all materials, labour ,lead,lift etc complete but excluding cost of steel reinforcement.

Damp proof course with CM 1:3, 20mm thick at basement levelusing water proof compoundas as instructed by the Engineer in charge including cost of all materials lead lift etc., complete -10m2

Providing Anti termite pre construction treatment using emulsifiable concentrate of required percentage as suggested by the manufacture and specification as per 6313 part II -1971 around plinth , foundation and basement as insructed by the Engineer in charge including cost of all materials,labour, lead,lift etc complete.

Centering for RCC works orPCC works including struting upto 3m height using MS sheets of size 90x 60cm and BG 10 gauge stiffened with welded MS angle of size 25x25x3mm laid over silver oak (country wood) joist of size 10x6.5cm(spaced at about 90cm c/c)and supported by casurina props of 10cm to 13cm dia (spaced at ) complying with standard specification as instructed by the Engineer in charge including cost of all materials,labour.lead.lift.etc.,complete.

Brick work in C.M 1:5 using Country bricks in the following levels as instructed by the Engineer in charge including cost of all materials, labour lead and lifts etc., complete.

Providing steel reinforcements for RCC works as instructed by the Engineer in charge including cost of steel, binding wire and labour for cutting, bending, tying and placing in position, lead,lift, etc., complete.

Plastering with C.M.1:3, 12mm thick as directed by the Engineer in charge including cost all materials,labour, ,lead,lift etc., complete

Plastering with C.M.1:5, 12mm thick as directed by the Engineer in charge including cost all materials,labour, ,lead,lift etc., complete.

Top finishing with Granolith flooring with Cm 1 : 1.2 using 12mm HB Stones 40mm thick as instructed by the Engineer in charge including cost of all materials labour,lead,lift etc., complete.

Fabrication supply and fixing in position of MS Rolling shutters(Gear type) as directed by the Engineer in charge including cost of all materials labour,lead, lift etc complete.

Fabrication,Suuply and fixing steel windows using M.S Z angles 20*20*5mm for window Frame and shutter frame, J angles 45*250*4mm for divider, 4mm thick plain glass as panels of shutter with 12mm MS square rod, painting with 2 coats of enamel paint over a coat ofred oxide as directed by the Engineer in charge and including cost of all materials,labour, lead,lift etc ., complete.

Fabrication,supply & fixing of steel framed double leaves door using 50x50x6mm MS angle for door frame, 40x40x6mm MS angle for shutter frame,25x6mm MS Flat for stiffner, 16gauge MS sheet for panels,painting 2 coats with enamel paint over one coat of red oxide.

Fabrication, supply and erection of steel trusses, purlin and intermediate rafters,rails, RS Joists as directed by the engineer in charge including cost of all materials labour,lead, lift etc complete..

Providing 0.50mm thick Galvanium Sheet roofing as directed by the Engineer in charge including cost of all materials lead, lift etc complete-1m2

Providing PVC Sheet roofing with 1mm thick PVC Corrugated transluscent sheet as directed by the Engineer in charge including cost of all materials lead, lift etc complete.

Supply and fixing in position of cuddappa slabs of 40mm thick polished smooth on top portion as directed by the Engineer in charge of the work including cost of all materials,labour,lead,lift,etc.,complete.

Painting with 2 coats of enamel paint of approved quality and colour as directed by the Engineer in charge including cost of all materials,labour,lead lift etc complete.

Painting with 2 coats of approved cement paint over one coat of white cement as instructed by the Engineer in charge including cost of all materials,labour,lead lift etc complete.

Distempering two coats with distemper of approved colour and quality over one coat of white cement as directed by the Engineer in chargeincluding cost of all materials,labour,lead lift,etc complete.

White washing two coats with white cement as directed by the Engineer in chargeincluding cost of all materials,labour,lead lift etc complete.

Wiring with 2 x 1.5 sqmm (22 / 0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point (SD No.25)as directed by the Engineer in charge including cost of all materials,labour,lead,lift,etc.,completet

Wiring with 2 x 1.5 sqmm (22 / 0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed Fan point (SD No.25)as directed by the Engineer in charge including cost of all materials,labour,lead,lift,etc.,complete-

Wiring with 2 x 1.5 sqmm (22 / 0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall ,with 150mmx100mmx113mm TW switch box with 3mm thick hylum sheet cover for 5A 3pin non interlocking CS Plug with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed plug point (SD No.38)as directed by the Engineer in charge including cost of all materials,labour,lead,lift,etc.,completet

Wiring with 2 x 4sqmm (56 / 0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall (with 150mmx100mmx113mm TW switch box with 3mm thick hylum sheet cover for 15A 3pin non interlocking CS Plug with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed power plug point (SD No.40)as directed by the Engineer in charge including cost of all materials,labour,lead,lift,etc.,completet

Supply and fixing of Twin type 4 feet 40Watts fluorscent light fitting complete withcopper choke and condenser,with TW round blocks on wall or ceiling with tube connection with PVC unsheathed copper leads from terminals to the fitting (SD90)as directed by the Engineer in charge including cost of all materials,labour,lead,lift,etc.,completet

Supply and fixing of WT bulk head fitting suitable for guard incandescent lamp with guard and 60 W bulb.(SD80) as directed by the Engineer in charge including cost of all materials,labour, lead, lift,etc.,completet

Supply and fixing of 1400mm(56")AC ceiling fan complete with electronic regulator with 300mm down rod on the existing clamp(SD 111) as directed by the Engineer in charge including cost of all materials,labour,lead,lift,etc., complete.

Supply and fixing of 3 phase 4 way TPDB 32 Amps/ way with fuse & Neutral link,63 Amps TPN Metal Clad switch with rewirable fuse units,suitable trunking box MS cable entry and internal connection in suitable angle iron frame work with PWD earthing.(SD 175) as directed by the Engineer in charge including cost of all materials,labour,lead,lift,etc.,complete

Supply and laying of 2 x 6 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.(SD 197) as directed by the Engineer in charge including cost of all materials,labour,lead,lift,etc.,complete.

Earthing as per P.W.D standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work (SD234) as directed by the Engineer in charge including cost of all materials,labour,lead,lift,etc.,complete.

Supply and fixing of 65 mm dia GI pipe (Class 'B') of 4 Mts. Length with 300 mm x 300 mm X 6 mm MS base plate duly welded at the bottom and with concreting and construction on Masonary pedestal with MS box of 30cm x 20cm x 10cm with angle iron frame work with door with lock and key arrangements and with supply and fixing of post top lantern fitting of (integral type) with copper choke and condensor and necessary accessories with complete set (Philips / Crompton Greaves / equivalent makes) with Spherical / ribbed / conical acrylic cover suitable for 125W MV lamp with supply and fixing of 1 No. 125W MV lamp and with supply and fixing of 16A fuse unit (500V), 5A SP switch, inside the MS box and painting with suitable colour.(SD 98)as directed by the Engineer incharge including cost of all materials labour lead lift etc complete-1 No

Supply and fixing of 65 mm (21/2") GI pipe (Class 'B')of 6 mt. Length with 300mm x 300mm x 6mm MS base plate, duly welded at the bottom with concreting with construction of Masonary pedestal with suitable MS box to house 5A control switch 16 A fuse unit (500V) etc. with suitable angle iron frame work, with door and with lock and key arrangements and with supply and fixing of 4'40 W twin street light flu.fitting with copper chokes and condenser with flu.tubes with 1 metre of 32mm dia GI pipe (Class 'B') complete, with necessary clamps, on the above post with PVC unsheathed leads with painting of suitable colour.(SD101)

Supply and fixing of 100 Amps TPN sheet double break switch with HRC fuse and neutral on suitable angle iron framework with MS cable entry boxes and with PWD earthing.(SD168)as directed by the Engineer incharge including cost of all materials labour lead lift etc complete-1 No

Supply and fixing 450mm (18") Sweep (Heavy Duty) AC exhaust fans of follwing types complete with necessary wall opening and making of the wall(SD118) as directed by the Engineer incharge including cost of all materials labour lead lift etc complete.

Supply and run of 25mm x 6mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection (SD 77) as directed by the Engineer in charge including cost of all materials,labour,lead,lift,etc.,complete.

S.P.M.CONSTRUCTIONS

bharaniengineeringworks