Improvement/up-gradation to the Electric System in the Ward No. 10 of ENT at Govt. SMGS Hospital Shalamar Jammu.

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 x 1.5 Sq.mm + 1 x 1.5 Sq.mm earth wire

2 x 2.5 Sq.mm + 1 x 2.5 Sq.mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

4 x 6 Sq.mm + 2 x 6 Sq.mm earth wire

4 x 10 Sq.mm + 2 x 6 Sq.mm earth wire

4 x 16 Sq.mm + 2 x 6 Sq.mm earth wire

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole 6/16 amp.

Triple pole and neutral 25 Amp.

Supplying and fixing following modular type switch/socket on the existing switch box cover including connections etc. as required.

5/6 A switch

3 pin 5/6 A socket outlet

15/16 A switch

6 pin 15/16 A socket outlet

Telephone Socket Outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 40 mm

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C"curve including connections, painting etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 amps & 15/16 amps. modular socket outlet and 15/16 amps modular switch connection etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

4 way (4 + 12), Double door

6 way (4 + 18), Double door

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

1 or 2 Module (75mmX75mm)

4 Module (125mmX75mm)

8 Module (125mmX125mm)

12 Module (200mmX150mm)

Supplying and fixing of following rating 240/415 Volt's "C" Series miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning (Above to 32 Amp.).

SPN 40 Amp

TPN 50/63 Amp

Supplying and fixing of 1.1 KV grade LT Aluminium cable 3.5 core armoured of following rating from the LT pole/main panel upto the wall mounted panel including connections etc as required.

120 Sq.mm 3.5 Core Armored

70 Sq.mm 3.5 Core Armored

Supplying and fixing of sheet steel panel indoor type wall mounted and having provision for 1 No. incomer MCCB and change over switch FP including proviidng and fixing of 200 Amp. aluminium bus bar 3 set and MCB strip for housing MCB's etc. as required.

Supply, installation, testing & commissioning of GI Electrode Earthing with 50mm dia and 3 meter length, with 3mm thick the electrode should be hot-dip galvinised. The GI Electrode shall be pre-filled with Cristaline Conductive Materila (CCM). The GI electrode shall be surrounded with BEE MOIST compound to provide maximum contact betwen the electrode and compound should be eco-friendly GI Electrode Earthing should be maintinance free and does not require regular manual addition of water . The earthing pit should be covered with PVC cover. including 25 x 5mm strip upto the building and GI wire from the building upto the wall mounted panel.

Supply, installation, testing & commissioning of maintenance free copper earthing system with 3 mtrs. Electrode 40 mm dia with minium 2mm thick and does not require manual additional of water. The electrode shall be pre-filled with hygroscopic powder and provided with suitable breathing and leaching ports at the ends. the electrode shall be surrounded by suitable powdered form of BEE MOIST so as to provide maximum contact between the electrode and the compund. The compound should be eco-friendly The earthing pit should be covered with PVC cover. including 25 x 5mm strip. upto the building and from the building upto the wall mounted panel.

Supplying and fixing MCCB in cubical panel board. Providing and fixing following rating and breaking capacity MCCB FP in existing cubical panel board including drilling of holes in cubical panel and making connections etc. as required (Make as per annexure enclosed).

MCCB FP 160 Amp. 36 KA

Change Over Switch 100 A FP MCCB Type

Supplying and fixing of fixtures/fittings.

4' Tube light 20/22 watt.

Two way Gang Box

Bell Anchor Ding Dong

Ceiling Rose

600 mm x 600 mm 36 watt LED Panel Light recessed type

Supplying and fixing of Angle/Baten Holder with 9 watt LED Lamp polycarbonate including making complete connnections etc as required. (Make as per annexure enclosed).

Supplying and fixing of following electrical items suitable for operating on 240/230Volts AC, 50 Hz supply. including connections etc. as required.

Ceiling fan 1200 mm sweep alongwith 1"-2" long fan rod. Prefered make as per list of approved make.

Exhaust fan 300 mm size Prefered make as per list of approved make.

Exhaust fan 380 mm size (Heavy Duty) Prefered make as per list of approved make.

Wall fan 400 mm size Prefered make as per list of approved make.

HIRA LAL

M/S NEW LIFE ENTERPRISES

RAKESH JAMWAL

SV ELECTRICALS