NIT NO. 15 (19-20) Item No. 9

Supply of Horizontal, split casing pump for clear water applications having discharge 94 m3/ hr, head 40 meter with bronze impeller & neck ring, SS 410 Shaft & sleeve, CI body, Pump suction size 150mmx100 mm with 25 HP, 3 phase AC, 1460 rpm, TEFC squirrel cage induction motor mounted on a common fabricated MS base frame with CI tyre / Pin bush coupling. Make:-Pump:-M&P/KBL/Jyoti/DJB approved make. Motor:-KEC/Crompton/ ABB/Jyoti/ DJB approved make.

Fabrication & Supply of MS Coupling Guard for pump set.

Supply of 150mm M.S. Flange. ISI make

Supply of 125mm M.S. Flange. ISI make

Supply of various types MS nut/bolts. ISI make

Supply of neoprene rubber sheet of 50% neoprene. Make:- Jyoti/National/any DJB approved

Supply of Buttweld reducer of size (6"X 5") of C class heavy. (ISI Mark)

Pressure gauge of 100mm dia. size having required range with accessories such as GI fittings, Bib cock etc. required complete the work. Make:- H-guru/ fibeg /any DJB approved make.

Supply of 90W L.E.D Light energy saving & environmental friendly long-life Versatile pressure die-cast aluminum IP 66 roadway laminate with high power L.E.D as light source. Make-Havells/Bajaj/Crompton

Supply of 45W L.E.D Light energy saving &environmental friendly long-life Versatile pressure die-cast aluminum IP 66 roadway laminate with high power L.E.D as light source. Make-Havells, Bajaj/Crompton

Supply of LT Power cable armored Aluminum conductor, XLPE insulated, size 2x 10 Sq.mm,650/1100 V. Make:-Havells/National/Grandlay/DJB approved make.

Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. (DSR E&M 2018 item no 12.34)

Supply of pole mounted cable junction box of size (530X450X175) mm having IP 65 protection with complete accessories as per site requirement. Make: - Sintex/any DJB approved.

Supplying and drawing (2 x 4) sq. mm size of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.(DSR E&M 2018 item no 1.17.20)

Supplying and fixing 5A to 32A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole and neutral.(DSR E&M 2018 item no 2.10.5)

Supply and fixing 5A to 32A rating, 240/415 Volts, 'C' curve, SP miniature circuit breaker suitable for inductive load in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole.(DSR E&M 2018 item no 2.10.1)

Laying and fixing of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size on wall surface as required upto 35 Sq. mm)clamped with 1 mm thick saddle) ( DSR E&M 2014 item no 7.7.1)

Supply of CIDF swing type Non return valve, PN 1.0, size 100 mm. Make:- Kirloskar/IVC/any DJB approved

Supply of CIDF non rising spindle sluice valve, PN 1.0, size 125 mm. Make:- Kirloskar/IVC/ any DJB approved

Supply of CIDF non rising spindle sluice valve, PN 1.0, size 100 mm Make:- Kirloskar/IVC/ any DJB approved

Installation, erecting, testing, and commissioning of the above said equipments/ accessories with necessary required items for completion of work includes Pressure gauges, flanges, MS bends, eccentric taper, rubber gasket, oil, foundation, necessary reinforcement and vibration isolation arrangement, loading, unloading, cartage, dismantling of existing system, lifting the same and taking out at floor level, making good all damages caused during installation and restoring the same to their original finish as required, adequate safety provision, barricading, warning signal and other safety measures while executing the work or wherever necessary so as to avoid accident. The components of the installation shall be of such design so as to satisfactory function under all conditions.

CHANDERA BUILDERS

Shakti Trading Co.

Swarn Engineers