MAINTENANCE OF ALMIRAH AND OTHER FURNITURE AT OTM / MD BUILDINGS AT COLABA UNDER GE (WEST) COLABA, MUMBAI

Amount

Table office Officers steel FD-1003/ similar pattern by removing the existing unserviceable part and S&F following similar new parts as per Drg

Hard Top sheet

Drawer

shutter with hinges

Top/bottom long stiffner

Top/bottom short stiffner

Locks

Rubber shoes

Preparation/cleaning of existing decorated surface/rubbing by emery paper, removing all spots, filling all cavity with putty and one coat of synthetic enamel paint for repaired and existing good furniture at furniture yard/Md/OTM buildings under GE (W) Colaba and all as directed by BSO

M&L for running welding (not exceeding 25mm each) of steel items including scraping, preparing surface of welded portion by grinding all as directed by BSO

Form without back (steel frame) FD-77/similar patern, removing the existing unserviceable part and S&F following similar new part as per Drg

Seat plank complete with french polish

Centre support stiffners complete

Top/Bottom short stiffner

Rubber shoes

Preparation/cleaning of existing decorated surface/rubbing by emery paper, removing all spots, filling all cavity with putty one coat of synthetic enamel paint for repaired and existing good furniture at furniture yard/Md/OTM buildings under GE (W) Colaba and all as directed by BSO

M&L for running welding (not exceeding 25mm each) of steel items including scraping preparing surface of welded portion by grinding all as directed by BSO

Chair verandah FD-259 (folding)/similar pattern, removing the existing unserviceable part and S&F following similar new part as per Drg/MAP

seat frame

Back frame

Arm rest

Screw with washers

Flat aluminium gusser

Flat aluminium stay

Stiffner

Rubber shoe/packing

Niwar canning of seat

Niwar canning of back

Preparation/cleaning of existing decorated surface/rubbing by emery paper, removing all spots, filling with putty, silver/aluminium painting for repaired and existing good furniture as directed at site

Almirah Large Steel with four shelf : DRG NO FD-1031

M&L for spot welding/running welding not exceeding 2.5 cm in length to steel items made of steel sheet including scrapping, preparing surfaces, grinding complete all as specified and directed

Removing the unserviceable leg and S & F the new leg in the furniture (Almirah large steel) as per drawing No FD-1031 complete all as specifed and directed

Removing the unserviceable shelf and S&F the new shelf in the furniture (Almirah large steel) as per drawing No FD-1031 complete all as specifed and directed

Removing the unserviceable cleat for shelf in the furniture (Almirah large steel) as per drawing No FD-1031 complete all as specifed and as directed

Removing the unserviceable hinge and S&F the new hinge in the furniture (Almirah large steel) as per drawing No FD-1031 complete all as specifed and directed

Removing the unserviceable shutters left/right sheet and S&F the new shutters left/right in the furniture (Almirah large steel) as per drawing No FD-1031 complete all as specifed and directed

Removing the unserviceable handle and S&F the new handle in the furniture (Almirah large steel) as per drawing No FD-1031 complete all as specifed and directed

Removing the unserviceable locks and S&F the new locks in the furniture (Almirah large steel) as per drawing No FD-1031 complete all as specifed and directed

Removing the unserviceable locking vertical rod complete assembly and S&F the new locking vertical rod complete assembly in the furniture (Almirah large steel) as per drawing No FD-1031 all as specifed and directed

Preparing steel surfaces and applying two coats of synthetic enamel olive green shade over a coat of primer with spray machine in the furniture (Almirah large steel) as per drawing No FD-1031 all as specifed and directed

M&L for repairs of dents on steel surfaces of furniture all as specified and directed

Almirah Medium Steel with four shelf : DRG NO FD-1032

Removing the unserviceable leg and S&F the new leg in the furniture (Almirah small/medium steel) as per drawing No FD-1032 all as specifed and directed

Removing the unserviceable shelf and S&F the new shelf in the furniture (Almirah small/medium steel) as per drawing No FD-1032 all as specifed and directed

Removing the unserviceable cleat for shelf and S&F the new shelf in the furniture (Almirah small/medium steel) as per drawing No FD-1032 all as specifed and directed

Removing the unserviceable hinge and S&F the new hinge in the furniture (Almirah small/medium steel) as per drawing No FD-1032 all as specifed and directed

Removing the unserviceable shutters left/right sheet and S&F the new shutters left/right sheet in the furniture (Almirah small/medium steel) as per drawing No FD-1032 all as specifed and directed

Removing the unserviceable handle and S&F the new handle in the furniture (Almirah small/medium steel) as per drawing No FD-1032 all as specifed and directed

Removing the unserviceable locks and S&F the new locks in the furniture (Almirah small/medium steel) as per drawing No FD-1032 all as specifed and directed

Removing the unserviceable locking vertical rod complete assembly and S&F the new locking vertical rod complete assembly in the furniture (Almirah small/medium steel) as per drawing No FD-1032 all as specifed and directed

Preparing steel surfaces and applying two coats of synthetic enamel olive green shade over a coat of primer with spray machine in the furniture (Almirah small/medium steel) as per drawing No FD-1032 all as specifed and directed

Locker Steel with four shelf : DRG NO FD-1029

Removing the unserviceable leg and S&F the new leg in the furniture (locker steel) as per drawing No FD-1029 all as specifed and directed

Removing the unserviceable shelf and S&F the new shelf in the furniture (locker steel) as per drawing No FD-1029 all as specifed and directed

Removing the unserviceable cleat for shelf and S&F the new cleat for shelf in the furniture (locker steel) as per drawing No FD-1029 all as specifed and directed

Removing the unserviceable conduit pipe and S&F the new conduit pipe in the furniture (locker steel) as per drawing No FD-1029 all as specifed and directed

Removing the unserviceable handle and S&F the new handle in the furniture (locker steel) as per drawing No FD-1029 all as specifed and directed

Removing the unserviceable hasp and staple and S&F the new hasp and staple in the furniture (locker steel) as per drawing No FD-1029 all as specifed and directed

Preparing steel surfaces and applying two coats of synthetic enamel olive green shade over a coat of primer with spray machine in the furniture (locker steel) as per drawing No FD-1029 all as specifed and directed

Charpoy steel with hard top : DRG NO FD/MAP-II/01

Removing the unserviceable stiffener and S&F the new stiffener in the furniture (charpoy steel hard top) drawing No FD/MAP-II/01 all as specified and directed

Removing the unserviceable long rail and S&F the new long rail in the furniture (Charpoy steel hard top) as per drawing No FD/MAP-II/01 all as specified and directed

Removing the unserviceable short rail and S&F the new short rail in the furniture (Charpoy steel hard top) as per drawing No FD/MAP-II/01 all as specified and directed

Removing the unserviceable leg and S&F the new leg in the furniture (Charpoy steel hard top) as per drawing No FD/MAP-II/01 all as specified and directed

Removing the unserviceable top ply wood and S&F the new top ply wood in the furniture (Charpoy steel hard top) as per drawing No FD/MAP-II/01 all as specified and directed

Preparing steel or wooden surfaces and applying French polich (glossy finish) to all exposed wooden surfaces and two coats of synthetic enamel paints over one coat of primer including scrapping old paint, sanding, applying putty to steel surfaces in the furniture (charpoy hard top) as per drawing No FD/MAP-II/01 all as specified and as directed.

Charpoy GI pipe FD-220/similar pattern

Removing the existing all unserviceable ply from frame of charpoy, tightening/refixing the serviceable loose parts of frames, supply & fixing 1948mm Long x 868mm wide single piece fresh new plywood 12mm thick MR grade along with flush/countersunk bolt (06 Nos in Qty ) of dia 10mm, length 50mm and bolt top must be flat and of dia 25mm. Each bolt must consists of two cup washers & one nut. Hole on ply for fixinig bolt must be made at a distance of two inch from centre of long rail.

Removing the existing all unserviceable all MS cleats and supply and fixing 60mmx30mmx5mm MS cleats.

Removing the existing all unserviceable all MS angles, and supply and fixing MS angles of 25mmx25mm having 5mm thickness and of length 868mm.

Removing the existing unserveceable long rail from charpoy GI pipe, tightening all loose parts and S&F long rail made of GI pipe 32mm dia medium Grade ISI marked duly threaded both ends and fixing to charpoy all as per Drg FD-220/Similar pattern all as directed.

Manufacturing of short rail made out of unserveceable long rail, duly threaded both ends and proper fixing in charpoy GI and tightening all loose parts after removing existing unserveceable short rail carefully without damaging/disturbing other parts all as per Drg FD-220/Similar pattern all as directed.

Manufacturing of legs made out of unserveceable short rail, duly threaded one end and proper fixing in charpoy GI and tightening all loose parts after removing existing unserveceable leg rail carefully without damaging/disturbing other parts all as per Drg FD-220/Similar pattern all as directed.

Removing unserveceable elbow and S&F GI elbow 32 mm bore and tightening all loose parts as per Drg FD-220/Similar pattern all as directed.

Removing unserveceable check nut and S&F GI check nut and tightening all loose parts as per Drg FD-220/Similar pattern all as directed.

Table 3'x2' steel FD-1008, 1007 similar patern, removing the existing unserviceable part and S&F following similar new part as per Drg

Hard top sheet

Rubber shoe

Top/Bottom long stiffner

Top/Bottom short stiffner

Drawer for FD -1008 only

Preparation/cleaning of existing decorated surface/rubbing by emery paper, removing all spots, filling all cavity with putty one coat of synthetic enamel paint for repaired and existing good furniture at furniture yard/Md/OTM buildings under GE (W) Colaba and all as directed by BSO

Material and labour for running welding (not exceeding 25mm each) of steel items including scraping preparing surface of welded portion by grinding all as directed by BSO

Table 3'x3' steel FD-1009/ similar patern, removing the existing unserviceable part and S&F following similar new part as per Drg

Hard top sheet

Rubber shoe

Stifner

Preparation/cleaning of existing decorated surface/rubbing by emery paper, removing all spots, filling all cavity with putty and one coat of synthetic enamel paint for repaired and existing good furniture at furniture yard/Md/OTM buildings under GE (W) Colaba and all as directed by BSO

Material and labour for running welding (not exceeding 25mm each) of steel items including scraping preparing surface of welded portion by grinding all as directed by BSO

Table office clerk steel FD-1004/ similar patern, removing the existing unserviceable part and S&F following similar new part as per Drg

Hard Top sheet

Drawer

Locks

Top/Bottom long stifner

Top/Bottom short stifner

Rubber shoe

Preparation/cleaning of existing decorated surface/rubbing by emery paper, removing all spots, filling all cavity with putty one coat of synthetic enamel paint for repaired and existing good furniture at furniture yard/Md/OTM buildings under GE (W) Colaba and all as directed by BSO

Material and labour for running welding (not exceeding 25mm each) of steel items including scraping preparing surface of welded portion by grinding all as directed by BSO

Bidder Name

Unitech Enterprises

Mahesh Traders

agarwal and company

M/s. SHRI SAINATH ENTERPRISES

M/s SK Construction