REPAIR OF POTHOLES INTERLOCKING PATHWAY ROAD SIDE FURNITURES AND RESURFACING OF CERTAIN ROADS AT MIL STN ABOHAR

Amount

M & L for repair to pot holes any depth n.exc 2.00 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in road, path etc. cutting around edges to at least 25 mm in depth, making good by applying a tack coat with bituminous primer (VG-10) @ 5 kg/10 sqm for putting and including premixed bituminous macadam, well rammed and sealed with binder (paving bitumen VG-30) 9.8 Kg per 10 sqm, binded with 0.09 cum of stone chipping 6.3 mm size and again well rammed (including supply of binder and chippings), depth of potholes exc 30 mm complete all as specified and directed by Engr-in-Charge.

M & L for preparing unsrfaced existing back top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and material & labour for applying evenly a tack coat with bituminous primer (VG-10) @ 5 Kg/10 sqm on bituminous surface complete, all as specified and directed by Engr-in-Charge.

M & L 30 mm thick (consolidated thickness) bituminous premixed semi dence asphaltic concrete with 5.50% binder content (bitumen of grade VG-30) by weight of total mix laid with self propelling mechanical paver finisher, rolled and compacted to required camber and gradient with power roller complete all as specified and directed by Engr-in-Charge.

M & L for providing premix bituminous macadam (consolidated thickness 75 mm or less) using 4% binder content paving bitumen (VG-30) by weight of total mix laid and self propelling Mechanical paver finisher, rolled and consolidated to required gradient and camber complete all as specified and directed by Engr-in-Charge.

M & L for painting of lines, dashes, arrows, letters etc. on road / pavement and the like using thermoplastic paint for a dry 2.5 mm thick @ 5 kg /sqm, binder contents 18.0% min, glass 30-40%, titanium dioxide 10.0% min. CaCos and inert fillers 42.0 max, including preparation of old / new surface complete all as directed by Engr-in-Charge.

Supply & Fixing in replacement cat eye reflective type of metal body alloy of size 100mm x 100mm x20mm with PAMA striplens reflector of model No DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions.

Supply & Fixing in replacement Dual- Directional delineator made out of 16 gauge MS rectangular pipe of size 25 x 68 mm and of length 600mm. Pipe stove enamelled and baked to 120 C or powder coated. Head made out of ABS plastic rectangular moulded with flat face provided with high intensity Prismatic Reflectors of colour (White /Yellow /Red/ Blue /Green) of size 100 x 125 mm with additional 2 reflective strips of 25mm wide and embedding the same in PCC (1:2:4), type B-1 using 20 mm graded stone aggregate including necessary excavation and earth work complete all as specified and directed by Engr-in-Charge. Note : Size PCC block for embedding delineator shall be 30 cm x 30 cm x 30 cm and cost of PCC shall be included in the unit rate of this item.

S & F in replacement of solar stud 125 x 125 x 25 mm made up of Aluminium alloy and construction powered by monocrystal solar panel with high capacity Ni-Cd rechageable battery having view distance 1000 meters, LEDs-010 mm, 6 pieces for high brightness, 12 hrs of continous lighting at night complete all as specified and directed by Engr-in-Charge.

S & F in replacement of MS round delineator (50mmx600mm) made out acrylic material fitted with high intensity retro reflector in yellow/red colour fitted on CRCA pipe 60 cm long and 50 mm dia powder coated or stove enamelled white/black colour provided with steel wire mesh made up into cage for safety in reflector and embedding the same in PCC (1:2:4), type B-1 using 20 mm draded stone aggregate including necessary excavation and earth work complete all as specified and directed by Engr-in-Charge. Note : Size PCC block for embedding delineator shall be 30 cm x 30 cm x 30 cm and cost of PCC shall be included in the unit rate of this item.

S & F in replacement of Solar Delineator road of size 1000 x 47mm, made out of polycarbonate and toughended aluminum body fitted with high intensity retro reflector in yello/red colour fitted on CRCA pipe 47mm dia and 100cm long powder coated or stove enamelled white/black colour provided with steel wire mesh made up into cage for safety of reflector and embedding the same in PCC 1:2:4 using 20mm graded stone aggregate complete all as specified & directed by Engr-in-Charge. Note :- Size of PCC block for embedding delinator shall be 30cm x 30cm x 30cm and cost of PCC shall be included in the unit rate of this item.

S & F in replacement speed breaker of dimensions 730mm x 245mm x 70mm made out of ABS with resistance and wear and tear properly highly reflectors moulded in PMMA material, welded with ABS base plate fixed on roads with adhesive and zinc plated nails as recommended by the manufactures & complete all as specified.

S & F in replacement convex mirror 1000mm made of PC material provided with suitable MS pipe post duly powder coated, meant for road turning, intersections, curves T junctions, hospitals, parking lots etc with clear and definite mirror image having 130 degree of viewing angles, unbreakable and stronger than glass, spring post (710 x 80 x 210mm) body of spring is made of special flexible material (polyurethane) without it can be quickly resorted to its original state without doing any damage to spring post as well as vehicle in case of high speed collision fix the spring post with road surface the bond is so strong that post will not be deviated by strong impact after installation of spring post 710mm upper dia 80mm & bottom dia is 210mm complete all as specified and directed by Engineer-in-Charge.

S & F rolled section as in framing for cladding, glazing and the like fitted with angle cleats and connecting plates confirming to Fe-290 Gde E-165 etc specified and complete all as specified and directed by Engineer-in-Charge.

M&L for providing two coats of synthetic enamel paint over new surface and a coat of red oxide primer on steel surfaces including preparation of surface of any description n.exc 10cm width or girth complete all as specified and directed by Engineer-in-Charge.

S&F in replacement Retro reflective informatory signage and boards, made up of 2mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lence type heat activated retro reflective sheeting confirming to type-III of ASTMD-4596-01, letters, borders etc as per IRC:67-2001 in silver white with blue colour black ground and with high intensity grade pasted on substrate by prressure sensitive adhesive backing which shall be activated by applying pressure confirming to class-II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means suitable sized aluminium alloys, rivets or bolts & nuts @300mm c/c all along the periphery specified and complete all as directed by Engineer-in-Charge.

M&L for PCC (1:4:8) type D2, (using 40mm graded stone aggregate) as in foundation, filling, mass concrete complete all as specified and directed by Engineer-in-Charge

Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified.

M&L for precast machine pressed concrete interlocking paver blocks any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade, set, jointed & pointed in neat cement slurry in floor/pavings/path etc with grey cement and no pigment complete all as specified and directed by Engineer - in - Charge.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer - in - Charge.

M & L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line,level and curvature, jointed with cement mortar 1:3 (1 cement : 3 Coarse sand) including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm) including making drainage opening wherever required complete all as specified & directed by Engineer-in-charge.

M & L PCC 1:2:4, type B1, (using 20mm graded stone aggregate) as in kerbs or mud stops, rounded or chamfered on edges and similar work all as specified and directed by Eng-in-Charge.

M&L preparing surface of concrete surface new on any description not other wise described over 10cm width or grith and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed by Engr-in-Charge.

M&L for preparing of old surface of concrete on any description not other wise described over 10cm width or grith and applying two coats of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

FAIR DEAL CONSTRUCTION CO (BID ID -3048015)

R B BUILDERS (BID ID -3049528)

GARG INFRA PROJECTS (BID ID -3049294)

M/s Amit Construction Company (BID ID -3049751)

Lovneesh Jindal Contractor (BID ID -3049441)

M/s Azure Infrastructure Construction Co. (BID ID -3048414)

Aman Enterprises (BID ID -3048329)

KRISHAN KUMAR CONTRACTOR (BID ID -3048013)