Providing Electrification work inside Committee room, Ground floor Class room and Rock Mechanics Laboratory and Providing Yard lighting at Mining Engineering Department building, in NITK, Surathkal.

Wiring for lighting/power circuit using 2×2.5sq.mm + 1×1.5sq.mm of PVC insulated 1100V grade, multistrand FRLS copper conductor single core cable in open or concealed system of wiring

Wiring for lighting/power circuit using 4×6 sq.mm + 1×1.5sq.mm of PVC insulated 1100V grade, multistrand FRLS copper conductor single core cable in open or concealed system of wiring

Wiring for lighting/power circuit using 2×6 sq.mm + 1×1.5sq.mm of PVC insulated 1100V grade, multistrand FRLS copper conductor single core cable in open or concealed system of wiring

Wiring for lighting/power circuit using 2×4 sq.mm + 1×1.5sq.mm of PVC insulated 1100V grade, multistrand FRLS copper conductor single core cable in open or concealed system of wiring

Wiring for lighting/power circuit using 2×1.5 sq.mm + 1×1 sq.mm of PVC insulated 1100V grade, multistrand FRLS copper conductor single core cable in open or concealed system of wiring make: Finolex, RR cable, Polycab, V-guard.

Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm as required. a) 38 mm thick size-----

Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm as required. b) 25 mm thick size------

Supplying and fixing heavy gauge PVC conduit pipe 19/20mm dia 2 mm thick-322mtrs confirming to IS 2509 with suitable size junction boxes, adhesive paste and fixing using inverted wood plugs in case of RCC ceiling and RCC wall stone structure or rawl plugs in case of brick walls and cement plastering damaged portion using heavy gauge saddles at an interval of 700 mm using WF screws, White / black coloured as applicable. a) 25 mm dia 2mm thick

Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit/casing capping casing capping using 2x1.5Sqmm (Phase Neutral) & 1x1.0sqmm (Earth wire) FRLS multistrand PVC insulated copper wire (confirmingtoIS-694:and latest amendments) with a 6 Amps flush type SP control switch shall be fixed on the existing plastic sheet /gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block, complete for each outlet. Wire: Finolex, / Rr cable/ Havells/ Polycab. Switch: Anchor/ Lisha/ Elle. A) Medium point above 3Mtr up to 6Mtr from tapping point to outlet via switch .

Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit/casing capping casing capping using 2x1.5Sqmm (Phase Neutral) & 1x1.0sqmm (Earth wire) FRLS multistrand PVC insulated copper wire (confirmingtoIS-694:and latest amendments) with a 6 Amps flush type SP control switch shall be fixed on the existing plastic sheet /gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block, complete for each outlet. Wire: Finolex, / Rr cable/ Havells/ Polycab. Switch: Anchor/ Lisha/ Elle. B) Long point above 6 Mtr up to 10 Mtr from tapping point to outlet via switch.

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit/casing capping casing capping using 2x1.5Sqmm (Phase Neutral) & 1x1.0sqmm (Earth wire) FRLS multistrand PVC insulated copper wire (confirmingtoIS-694:and latest amendments) with a 6 Amps flush type SP control switch shall be fixed on the existing plastic sheet /gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block, complete for each outlet. Wire: Finolex, / Rr cable/ Havells/ Polycab. Switch: Anchor/ Lisha/ Elle. A) Long point above 6 Mtr up to 10 Mtr from tapping point to outlet via switch.

Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit/casing capping casing capping using 2x1.5Sqmm (Phase Neutral) & 1x1.0sqmm (Earth wire) FRLS multistrand PVC insulated copper wire (confirmingtoIS-694:and latest amendments) with a 6 Amps flush type SP control switch shall be fixed on the existing plastic sheet /gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block, complete for each outlet. Wire: Finolex, / Rr cable/ Havells/ Polycab. Switch: Anchor/ Lisha/ Elle. A) Medium point above 3Mtr up to 6Mtr from tapping point to outlet via switch box

Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2piece sand fixing the same to the wall using tapered inverted wooden plug screws. a)12” ×12” ×2”

Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2piece sand fixing the same to the wall using tapered inverted wooden plug screws. b) 15” ×12” ×2”

Supplying and fixing hylum plastic sheet 25cm ×30cm×2nos

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. a) 6A SP Switch

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. b) 6A Three-way 5Pin Socket

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. c)Electronic stepped regulator.

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. d)6A Bakelite Ceiling Rose

Supplying and fixing 12-way surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.Cwall, including necessary raw plugs, Machine/NF screws etc., complete. Make: Anchor Roma/ MK/ Legrand/ Honeywell/ABB

Supplying and fixing 12-way surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.Cwall, including necessary raw plugs, Machine/NF screws etc., complete. Make: Anchor Roma/ MK/ Legrand/ Honeywell/ABB

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Make: Anchor Roma/ MK/ Legrand/ Honeywell/ABB a)6A one-way switch

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Make: Anchor Roma/ MK/ Legrand/ Honeywell/ABB a)6A Three-way switch

Supply and fixing of power board made up of 12” ×9” ×1.5” polished wood board with base plank covered with 3mm thick hylum plastic sheet and consisting of 3 nos of 16 Amps switch and 03 no’s 0f 16 Amps 5 pin socket. Make: Anchor, Lisha, GM, Elle, Cona, Hi-Fi.

Supply and fixing of power board made up of 10” ×8” ×1.5” polished wood board with base plank covered with 3mm thick hylum plastic sheet and consisting of 2 nos of 16 Amps switch and 02 no’s 0f 16 Amps 5 pin socket. Make: Anchor, Lisha, GM, Elle, Cona, Hi-Fi.

Supplying and fixing of Modular power board made up of 10-12-way PVC modular box with superior quality modular switch mounting polycarbonate plate consisting of 4 Nos of 16 A one-way Switch and 4 Nos 6/16A universal socket. Make: Anchor Roma, Lisha, ABB, Honeywell, Legrand.

Supplying of Batten LED Light fitting 1 ×4’-20/22 W PVC Batten with integrated LED tube 20/22 W with high quality diffuser with life of 25000 burning hours and 70% lumen maintenance with CRI > 80. POWER INPUT:22-240v @50/60 Hz &power factor > 0.9 along with CE approved 2 years warranty against any manufacturing defect working under standard electrical condition. Make: Philips/ Bajaj/Havells/ SURYA /EVERDAY

Fixing all types and all capacities of fluorescent/false ceiling/spotlight/CFL/LED fittings indoor on the wall/ ceiling/rafters/girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps.

Supplying of recess mounting type LED modular panel light of 2’×2’-36W comprising of pressured cast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500-degree K, CRI> 70-%, efficacy> 100lumen oer w, 120-degree beam spread, life> 25000 burning hours and compliance to is 10322/ iec 60598, lm 79 & LM 80. The lamp compartment is enclosed with anti-glare opal diffuser which enhances the lighting level LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF. 0.95, power loss should <5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20% , life as per LM 79. Make: Philips/ Bajaj/Havells/ SURYA /EVERDAY

Fixing all types and all capacities of 2'x2' LED Light fittings indoor on the wall/ceiling/rafters/girders with necessary supporting frame, using 2310.0076” twin twisted PVC insulated wires, required Nos of round blocks

Supplying 48’ Sweep (1200 mm) BLDC Copper winding ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230V, 50cycles.Single phase AC supply conforming toISS-374-1979 and with double ball bearing system. Make: Bajaj/ CG/Atom burg/ Havells/Usha/ orient/V-guard

Supplying and fixing Extra length of GI pipe of class B 19mm dia for down rod.

Fixing a ceiling/wall mounting fan of all capacities and all types, with necessary clamps and’s ‘hook made out of 15 mm dia MS rod, with 5A. ceiling rose of approved quality with necessary length of 23/ 0.0076-inch PVC insulated twin twisted wire if approved quality, mounted on a suitable size wooden board and wired.

Supplying and fixing of 20Amps SP & N Metal Socket set of 2 pole and earth plugs and socket with 32A DP MCB. The entire plug and socket shall be mounted in a thermoplastic/powder coated metal box & wired Completely. Make: Legrand/L & T/ Havells/ HPL/ABB

Supplying and fixing 12-way SPN double door DB MCB distribution boards on wall/wood board /flush mounting using required clamp, bolts, nuts, dummy plates etc, with provision for fixing suitable type capacity MCB’s SINGLE phase /3 phase/single door with powder coated painting made out of 14 SWG MS enclosure. Make: Siemens/L & T/ Havells/ Schneider

Supplying and fixing 6-way TPN double door DB MCB distribution boards on wall/wood board /flush mounting using required clamp, bolts, nuts, dummy plates etc, with provision for fixing suitable type capacity MCB’s SINGLE phase /3 phase/single door with powder coated painting made out of 14 SWG MS enclosure. Make: Siemens/L & T/ Havells/ Schneider

Supplying & fixing 63A TPN MCB rating miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and ‘C’Type curve, indicator ON/ OFF, energy cross-3 with short circuit breaking capacity of 10 K and complete wiring as required confirming to IEC 60898.

Supplying & fixing 32A TPN MCB rating miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and ‘C’Type curve, indicator ON/ OFF, energy cross-3 with short circuit breaking capacity of 10 K and complete wiring as required confirming to IEC 60898.

Supplying & fixing 6-32A DP MCB rating miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and ‘C’Type curve, indicator ON/ OFF, energy cross-3 with short circuit breaking capacity of 10 K and complete wiring as required confirming to IEC 60898.

Supplying & fixing 6-32A SP MCB rating miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and ‘C’Type curve, indicator ON/ OFF, energy cross-3 with short circuit breaking capacity of 10 K and complete wiring as required confirming to IEC 60898. Make: Siemens/L & T/ Havells/ Schneider/ABB/ C &S / CG

Supplying and fixing of 30Amps/ 63A TP &N 5pin Tempra Metal Socket set with 32A TPN MCB and plug top. The entire plug and socket shall be mounted in a thermoplastic /powder coated metal box & wired completely. Make: Legrand/L & T/ Havells//ABB/ HPL

Fabricating supplying and mounting MS box made out 16SWG suitable for floor/wall mounting, fully weather proof with provision for better heat dissipation, provide with hinged front cover, equipped with tamperproof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and ox should be finished with tanks treatment with powder coated paint and finally finished with approved colour etc, complete.

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.

Supplying, fixing and wiring 0 to 600V 96x96mm AC Voltmeter on existing panel/wood board. Make: Conzerv/EI measure/ Schneider/ Trinity/ Secure/ L &T

Supplying of 100A on load change over switches 4 poles, AC-23ADuty, 415V, 50Hz, AC Supply. Make: Make: Schneider/ L &T/ C &S/ ABB

Fixing of 100 A change over switch/Contactor along with neutral link with screws, bolts, nuts and wiring using required capacity wires and circuit labelling.

Supplying push button operated direct online starter with an antiweld silver cadmium oxide contactor with replaceable fixed and moving contacts and bimetallic thermal overload relay help in anticorrosion treated sheet to suitable capacity wires for 230/ 440 V 1/3 phase motor upto 56 HP. MAKE: L &T / Seimens/ Schiender

Supplying fixing and wiring earth electrode for grounding of lifts, transformers DG sets etc. Using 40mm dia2.9mm thick2.5mlong GI pipe With GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400 ×400×400 mm with a cast iron cover. The earth electrode shall have staggered holes of 12, dia and the electrode should be covered 150 mm all round with alternate layers of salt and charcoal from the electrode is to be established through GI strip using GI bolts and nuts including naming of earth pit, resetting of interlocks etc complete. The earth and neutral voltage should be below 3V.

Supplying and Fixing of 25×3 mm coper strip for grounding connections, using necessary fixing materials like insulator, clamps, welding etc as required.

Supplying of 16 Sqmm, 4 Core (11 GI strips-4 ×0.8 mm)1.1 kV, XLPE or Heat resistant PVC insulated, PVC extruded Inner Sheath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975

Laying of 16 Sq mm size LT cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminium Rollers as directed by the departmental staff

Supplying and Fixing of 16 sq. mm Aluminium End Terminal (Lug)

Supplying and Fixing of 25 mm dia size heavy duty cable glands suitable for UG Cables of 1.1 Kv class (Metal only)

Supply of 90/100W LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, CCT > 5500K. IP 66 optical and electrical compartment & impact resistance of complete luminaire > IK08. Power Factor >0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with 90/100 W System Power consumption. LED Efficiency> 1301m/w, nominal CRIP>75. Luminaire manufacturer should have in- house facility accredited by NABL / CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark / name shall be Engraved / Embossing on the die cast housing / Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source Make: Phillips / Bajaj / Crompton / Havells / Wipro / Surya / Eveready

Fixing LED floodlight / street light fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. The work includes necessary scaffolding / skylifts, labours etc complete.

Supply and Installation / Fixing 300 mm x 450 mm x 214 mm size Outdoor type Thermoplastic Modular Panel enclosure with Transparent Polycarbonate Lid, banana connector, insulator, din rails, shock proof, IP65 (Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase / Three Phase Energy Meter in suitable base plate and having a provision for Fuse / MCB cut-out with suitable transparent hinged flap opening for operating MCB along with complete tamper proof sealing facility Make: Hensel / Syntex

Supply and Installation / Fixing 300 mm x 300 mm x 214 mm size Outdoor type Thermoplastic Modular Panel enclosure with Transparent Polycarbonate Lid, banana connector, insulator, din rails, shock proof, IP65 (Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase / Three Phase Energy Meter in suitable base plate and having a provision for Fuse / MCB cut-out with suitable transparent hinged flap opening for operating MCB along with complete tamper proof sealing facility Make: Hensel / Syntex

Supplying and fixing Microprocessor based Electronic street light timer (without contactor), 5.47 Din Mounting using necessary bolts, nuts and washers etc. Make: L&T / Schneider / ABB

Supply and fixing of 100A 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. Make: L&T / Schneider / Siemens

Engaging labours for dismantling, removing, and stacking old wirings, switch boards, Power boards, light fixtures, fans and other electrical accessories. The work includes tracing of existing circuits, floor cutting work, cutting of Gl poles, reconnection work, modification work, necessary labour, tools & plants, safety equipment’s, transporting to office yard etc complete.

Please Enable Macros to View BoQ information