Renovation of Space in BMD for Concrete Printing lab at AMPRI,Bhopal

Amount

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coats

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Renewal of old putty of glass panes (length)

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Cutting holes up to 30x30 cm in walls including making good the same:With common burnt clay F.P.S. (non modular) bricks

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.25 mm nominal dia Pipes

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.1.0 mm thick

Brick work with chimny brick of superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)

Providing and fixing Kadappa stone in 1 inch thickness in plateform including leveling and setting the slab by cement mortar 1:4 (1 cement : 4 coarse sand) for per storage

P/f aluminium fixed partition in aluminium section medium gauge with 4mm glass / 12mm board ISI marked including fitting with clip, rubber as required with screws, etc all fittings and fixtures as required and desired by E-in-C.

Providing and fixing bifold flush door of thickness 30mm thick of size 6x6 feet in angle frame 40x 40x5 mm including setting the door with butt hinges 3 nos. of size 5inch including welding of butt hinges in angle frame and lamination of door in Mica of average thickness 1.00 mm with Teakwood beading of similar thickness of door and meeting style including fitting of Aldrop set for Bifold door 12 inch in SS and other fitting and fixture like tower bolt, letch etc as per site requirement and direction of E-in-Charge.

P/f aluminium door in aluminium section medium gauge with 4mm glass / 12mm board ISI marked including fitting with clip, rubber as required with screws, handles, door stopper hinges, L-drop etc all fittings and fixtures as required and desired by E-in-C.

Providing and applying two or more coats water proof painting on external surfaces including cleaning the surftace by brooming mopping and dirt free as per manufacturer specification

Labour for shifting and cleaning

Providing and fixing under cabinet in exiting structure of size approx 2 feet 8 inch height and 30 feet long with doors of required size in symmetry and soft close hinges of make GODREJ/ EPCO/ BLUM and other fittings including handles 100 mm long , as needed and plyboard/blockboard 16mm of approved make and mica 0.75 mm on front and balancing laminication on back. The under cabinet of the platform will be made of ply board with mica on top with fitted with hinges including all fittings and fixtures etc. complete.as required as per site requirement and instruction and decision of E-in-c. Line drawings is included and for any query related to this item site visit may be done and E-in-c may be contacted if required.

Providing and fixing over cabinet in exiting wall/ structure of size appromate 2 feet height 30 feet long and 1 feet 6 inch deep with doors of required size in symmetry and other fittings handles 100mm long, locks, hinges etc. as needed and plyboard 16 mm and mica 0.75mm on front and balancing lamination on back and hinges of make hettich/ hafle/ blum. The over cabinet of the platform will be made of ply board with mica on top with fitted with hinges including all fittings and fixtures etc. complete.as required as per site requirement and instruction and decision of E-in-c. Line drawings is included and for any query related to this item site visit may be done and E-in-c may be contacted if required.

Rewining glass in existing aluminium windows of size approxmate 1.5meter x 1.5 meter by removing rubber gasket and Re-fixing old aluminium section in New glass of 4mm thickness including Re-fixing of existing sliding window in old frame and replacing of roller bearing. .

Reinforced cement concrete work chajjas, including lintels, above plinth level up to floor five level including the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand incuding manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 20%: 3 graded stone aggregate 20 mm nominal size derived from natural sources) of size 1meter x 0.75 meter plastering and painting in line and level of existing chajjas.

Providing and fixing MS Chequered plate 1.5mm thick including cutting and welding in existing frame of cable trench and filling trench by sand as per direction of E-in-Charge