Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.3 LAccepted-AOC T 16 1 SHETTY HOTEL OLD NAVY NAGAR COLABA MUMBAI 400005 | MUMBAI | MUMBAI | MAHARASHTRA | 400005 | L1 | Accepted-AOC L1 | |
| 2 | L2₹41.9 L+₹64,304 (1.56%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹42.0 L+₹71,040 (1.72%)Rejected-AOC | L3 | Rejected-AOC L3 | |
| 4 | L4₹42.9 L+₹1.6 L (3.91%)Rejected-AOC | L4 | Rejected-AOC L4 |
Tender Value
₹43.5 L
EMD Value
₹87,000
Closing Date
8 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri Kislay Kishore, IDSE
GE (AFA) Hyderabad PIN-500043
Work services for Modernization of Kitchen at FCM at AFA Hyderabad
2022_MES_561055_1
8296/E8
Open Tender
Civil Works
Item Rate
180 days
GE (AFA) Hyderabad
As per tender documents
4 documents required · 4 mandatory
₹500
GE (AFA) Hyderabad
₹87,000
Yes
16 Mar 2023
2 Nov 2022
10 Dec 2022
2 Nov 2022
8 Dec 2022
25 Nov 2022
2 Nov 2022 - 9 Nov 2022
Amount
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar and removing serviceable tiles to stores and rubbish to a distance exc 1.5 km and n. exc 5km complete all as specified and directed
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish to a distance exc 1.5 km and n. exc 5km complete all as specified and directed
Demolition of brickwork or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, removing serviceable materials to stores and unserviceable rubbish to a distance exc 1.5 km and n. exc 5km complete all as specified and directed.
Dismantling of wrought iron or mild steel work of any description not otherwise provided for and removing to store all as specified and directed
M&L for Cement concrete 1:3:6 type C1, using 20 mm graded stone aggregate laid in sub base, sub floors, padding concrete as levelling course complete all as specified and directed.
M&L for Ceramic heavy duty floor tile of size 600x600mm , 15/16 mm thick laid and jointed with grey cement slurry using spaces and joints filled with epoxy grout as per manufacturers instructions laid over and including screed bed in CM (1:6) 20mm thick complete all as specified and directed. Make Durastone of Somany or equvalent
M&L for Granite (of any type) 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, laid over and including screed bed in CM (1:6) 20mm thick complete all as specified.
M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing , laid over and including screed bed in CM (1:6) 20mm thick complete all as specified.
M & L for glazed ceramic coloured tiles of size 450 x300x 7mm thick, in vertical surfaces of dados, skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including rendering / screed bed 10mm thick in cement mortar 1 : 4 on fair faces of brick or concrete surfaces rough finished to receive tiles over complete all as specified and as directed..
S&F of 20 mm outer dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings in walls/ceilings or laying in floors with necessary fittingscomplete including taking down of old pipe of any description all as specified and directed
S&F of 25mm CPVC pipes SDR 11 and plain CPVC SDR 11 fittings in walls/ceilings or laying in floors with necessary fittings complete including taking down of old pipe of any description all as specified and directed
S&F of 32mm CPVC pipes SDR 11 and plain CPVC SDR 11 fittings in walls/ceilings or laying in floors complete all as specified including taking down of old pipe of any description all as specified and directed
S&F of 32mm CPVC pipes SDR 11 and plain CPVC SDR 11 fittings in walls/ceilings or laying in floors complete all as specified and directed
S&F in repair for high density pipe 40 mm dia (HDPE) pressure rating 6 Kg / Sqcm fixed to wall, floors etc complete all as specified and as directed.
S&F Rotational moulded PVC water storage tanks of 1000 ltrs capacity (cylindrical vertical with screwed type closed top) , two layered, hoisted and fixed in position all as specified in SSR part – I all as specified and as directed.
S&F of CP Bib taps in repairs 15 mm cast copper alloy fancy type screwed for iron pipe or for brass ferrule complete all as specified.
S&F of stop valves / angle cock concealed type fixed in repairs 15mm dia cast copper alloy fancy type CP screwed down high pressure screwed both ends for iron pipe or for unions, of 15mm bore complet all as specified and as directed.
S&F of Gun metal globe or gate valves of 25mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and as directed. ..
S&F of in repairs Gun metal globe or gate valves of 25mm dia with iron wheel head screwed both ends for iron pipe ecomplete..
S&F in repair chromium plated gratings 100mm dia with or without hole , fixed with suitable solvent cement complete all as specified and as directed.
S&F in repairs PVC (SWR) floor trap 75mm, plain with grating including jointing with solvent cement complete all as specified and as directed. .
S & F of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.
S & F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.
Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth all as specified and as directed.
S&F Pre painted galvalume aluminium zinc coating GI based corrugated sheet 0.5mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall with self tapping screws including dismantling of old sheets of any description complete all as specified and as directed.
Dismantling of old sheet of any description and Fixing only (except sheets) / refixing sheets of any description in roof covering / cladding to wall with self tapping screws complete all as specified and as directed.
M & L for Providing (1:3:6) type C1, (using 20mm graded stone aggregates) precast cement concrete solid building blocks exc 10cm thick,set in CM(1:6} complete all as specified and as directed.
M & L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 mixed with WPC as per manufacturers instructions finished even & smooth without using extra cement complete all as specified. (WPC shall be measured and paid separately).
Supply only of liquid waterproofing compound of approved makes.
S&F rolled mild steel Fe- 410-W (Gde E-250) quality 'A' rolled sections as in main and cross beams, hip and jack rafters; column posts, bracings, purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and as directed
S&F rolled sections Fe- 410-W (Gde E-250) quality 'A' as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates etc including fixing of wire mesh etc complete all as specified and as directed . Note : Wire mesh will be measured seperaely
M&L for Preparation of new Steel and Iron surfaces Surfaces of any description, over 10cm in width or girth,not otherwise described and painting with two coats of Synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for 18mm thick plywood of grade (BWP), type BB fixed with nails as in cupboards/Almirah Shutters all as specified and as directed
M & L for 0.9 mm thick Decorative laminated sheet type 1 of surface finish coloured and pattern as approved and fixed over plywood with approved adhesive all as specified.
M & L for Brass handles, cast type, polished bright 150 mm long all as specified and directed
S&F Brass Locks cupboard grade I, size 50 mm brass 4 levers all as specified and as directed.
S&F Continuous (piano) hinges, brass width of flap 30mm bright finish or electro galvanised all as specified and as directed.
Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and raming with earth or broken rubble mixed with earth around, in layers not exceeding 25cm in hard/dense soil.all as specified and as directed.
M&L for Cement concrete PCC (1:2:4) type B2 ( using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.
M & L for preparing new plastered or unplastered surfaces of walls including cornices and applying two coat of cement base paint complete all as specified and as directed .
S & F of 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty and glazing clips/beading etc of any type in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed.
S&F of Stainless steel SINGLE BOWL SINK WITH TABLE & 1 U/S( Dimesnison : 1200x700x900), Top SS sheet 16 SWG 304 grade, Inner work frame support 32x32x3 mm thick MS angle, Sunken edges ( front&both sides), 38mm dia supporting pipes 304 grade, adjustable nylon bullet feet Under shelves SS sheet 18 SWG 304 grade complete all as specified
S&F of Stainless steel DOUBLE BOWL SINK WITH 1 U/S (Dimesnison : 1800x700x900), Top SS sheet 16 SWG 304 grade, Inner work frame support 32x32x3 mm thick MS angle, Sunken edges ( front&both sides), 38mm dia supporting pipes 304 grade adjustable nylon bullet feet Under shelves SS sheet 18 SWG 304 grade complete all as specified
S&F Stainless steel BIG BOWL SINK WITH 1 U/S (Dimesnison : 1000x1000x900), Top SS sheet 16 SWG 304 grade Inner work frame support 32x32x3 mm thick MS angle Sunken edges ( front&both sides), 38mm dia supporting pipes 304 grade adjustable nylon bullet feetUnder shelves SS sheet 18 SWG 304 grade complete all as specified
Supply and fix of Armstrong Suprafine Metal ceiling of 600x600mm panes 0.50mm thick with grid size 600x600mm consisting of main tee 32x15mm @1200 c/c, cross Tee of 1200mm of size 29x15mm size and cross Tee of 600mm length of size 27x15mm and wall angle of size 19x19mm and fixed all around the wall to form a grid of size 600x600. Tiles shall be inserted in the formed grid and suspended with 2mm GI wire at every 1200mm intervals C/C all as specified and as directed. Make: Armstrong or equivalent
Supply, laying and testing UG cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 300 sq mm 3½ core and as directed.
Supply, laying and testing UG cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 240 sq mm 3½ core and as directed.
M&L for Shifting of Transformer of Capacity 400 KVA from Sub-station No. 02 to Sub-station No.15 including removing all HT/LT cables/Joints and fix the same to sub-station No. 15 including HT/LT cables/Joints connections complete all as specified and as directed.
Design, supply, erection, testing and commissioning of outdoor type LT feeder pillar box platform mounted (to be mounted on the P.C.C. brick pedestal), suitable for 3 phase 4 wire, 415 volts AC supply and having 4 Nos Aluminium bus bars of rating not less then 100 amps, Spreader link to incoming/outgoing MCCB for termination of incoming/outgoing cable and Aluminium connecting bars of suitable size (R-Y-B-N) for outgoing cables, duly fabricated in a CPRI approved / certified factory having modern fabrication and testing facility which includes at least seven (07) tanks pre treatment facility comprising of de-greasing, rinsing, de-rusting, rinsing, phosphating, rinsing and passivation followed by powder coated painting (thickness not less than 80 Micron)with approved shade of RAL 7032. The feeder pillar shall be provided with suitable Neoprene rubber gasket to make it completely dust and vermin proof and degree of protection not less than IP-55 and general construction conforming to IS : 13947. The feeder pillar shall be made out of 3.00mm thick CRCA mild steel sheet and 3.00mm thick gland plate and having front opening facility (with double layer shutter) and rear opening facility with single layer shutter with locking facility and 2 side slanting canopy type roof on top and mild steel angle (50x50x5mm) legs of length 30 cm at bottom, suitable for mounting on the pedestal, The feeder pillar shall be provided with ventilation facility in the form of louvers for better heat dissipation, including taking down old unserviceable. The feeder pillar shall be comprising of the followings :-
(i) Incoming : MCCB, 4 pole, 630 Amps, 415 Volts, 35 KA, with adjustable setting, – 01(One) No.
(ii) Outgoing : MCCB, 4 Pole, 400 Amps-01 No and 160 Amps-03 Nos, 415 Volts, 25 KA, with adjustable setting
(v) LED indicating lamps with holder for main supply - 1Set of 3
(vi) Change Over 400 Amps - 01 Nos
M&L for earthing complete with Galvanised steel earth plate eletrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filled in alternate layers and electrode connections by using Galvanised iron 32 x 6 mm strip connected by means of bolts, nuts, check nuts and washer of galvanised iron or steel, provision of 40mm dia GI pipe medium grade for protection of GI earth strip and 20mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) type C1 chamber of size 45cm X 45cm X 45cm including, MS funnel, wire mesh, 50 mm thick RCC 1:2:4 type B1 earth pit cover with 6 Nos, 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance n exc 50 mtr, provision of charcoal and salt complete all as shown in electrical plate No 3 of MES Schedule Part-I (2009) and all as directed.
Supply, laying and testing UG cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3½ core and as directed.
S & F of perforated cable tray, made of 2.0mm Galvanized Steel sheet, duly bended to required shape by sheet bending machine, including cover, made of 1.2mm thick Plain Galvanized Steel sheet duly screwed with the cable tray and duly fixed on the wall / ceilings including suitable Galvanized Steel brackets or hanging from the ceiling with suitable suspender as required at site of size 250mm (10 inch) complete all as specified and as directed by the Engineer -in Charge.
M & L for Boring of holes under road, pavement, hard standing by using trenchless technology using ultrasound technique and necessary machine to insert pipe of 100mm light grade GI pipes all as specified and as directed. Note :- Protection pipe will be measured and paid separately
S&F of light grade galvanized pipe ISI marked with all fitting ISI marked, laid in trenches, under road or fixing on wall/pole/ crossing nallah etc of bore 100 mm complete all as specified and as directed .
Excavation in trenches in any type of soil n.exc 1.5 m wide and n.exc 1.5m depth and getting out including trimming the sides and forming bottom surface to required levels for laying cables complete all as specified and as directed
M&L River dry sand cushioning to UG cables (8cm deep before laying of cable and 15cm deep over the cable) in trenches including punned to a thickness up to 18cm and consolidation, complete all as directed. Note : Punned thickness shall be measured
Returning, filling in trenches in any kind soil in layers n.exc 25cm after laying of cables including spreading, leveling and well ramming complete all as specified and directed
Supply and lay un reinforced pre cast concrete cable covers conforming to IS-5820-1970, class LV, type 1 flat of size 250x150x40mm laid in trenches as specfied and as directed by Engr-in-Charge.
Removing surplus excavated material (soil) to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specfied and as directed
S J REDDY
Deepika Enterprises
POWER CONSTRUCTION COMPANY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .