Construction of Scavenger Colony at Dhubri District

Amount

Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level. (a) In ordinary soil

Shuttering and shoring the earth at different levels in foundations where necessary with required prop, struts, planks, timbers, nails etc. including dewatering if necessary, complete as directed and specified (measurement to be taken in the face area timbered) (b) Above 1.5 m upto 3.00 m depth

Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a).Brick on flat soling.

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (a) In prop 1cement: 3 sand :6 coarse aggregate by volume

Brick work in cement morter with 1st class brick including cement mortar plastering, racking out joints and dewatering if necessary, and curing complete as directed in sub-structure up to plinth level. (I) One side plastering with 10mm thick i) Using plastering of cement mortar prop. 1:4 a) Brick work in cement morter proportion 1:5

Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed.

112mm thick 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) II) Both side 15mm thick plastering i) In prop. 1:4 a) Brick work in cement morter proportion 1:4

Extra over item no 32.2.7 for brick walling including plastering for each subsequent floor or part thereof above the 1st floor level.

Providing and laying plain/reinforced cement croncrete works using cement, coarse sand & 20mm down graded stone aggregate with cost of necessary form work including dewatering if necessary, and curing for reinforced cement concrete work complete as directed (Reinforcement will be measured and paid separately) I) Using mixture machine (A) In sub - structure up to plinth level Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. N) Without using admixture, plasticiser (c) M25 grade concrete

(b) M20 or Prop. 1:11/2:3

B) In super structure up to 1st floor level i) Vertical members like column, pillars, post, struts etc N) Without using admixture, plasticiser (c) M25 grade concrete

(b) M20 or Prop. 1:11/2:3

ii) Horizontal members like beam, lintel, girder bressumer etc. N) Without using admixture, plasticiser (c) M25 grade concrete

(b) M20 or Prop. 1:11/2:3

iii) Suspended floor (Slab, balcony, staircase etc) N) Without using admixture, plasticiser (c) M25 grade concrete

(b) M20 or Prop. 1:11/2:3

Extra for every subsequent floor above 1st floor on item no 32.1.(I)

Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) Normal range Somany/ Orient/Nitco /Asian Make ii) Of size 600mmx600mm and above

Providing polished vitrified wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/white cement slurry mixed with approved pigment to match shade of tilesc complete at all levels as specified and directed. (coloured pigment should be in conformity with colour of tiles and as approved and directed by the department). i) Of size 300mmx450mm and above

Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed. (A) CERAMIC i)Normal range (Sizes 300 mm x 300mm and above) (a)Orient made: Galaxy Brown, Galaxy creama, Galaxy Pink, Galaxy Green, Pulsar Beige, Pulsar Blue, Pulsar Dove, Pulsar Pink, Burj Brown, Burj Green, Burj Slate

Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. c) 100mm thick

Providing, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars, joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels. (a)2 Track sliding window (i)6mm clear glass

Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws. I . Plain grill (c) Fixed to Brickwork/P.C.C/R.C.C.

Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified. (a) With sal wood

Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. a) Decorative type face panel and block board core. (i) 40 mm thick .

Providing, fitting and fixing 40mm x 48mm wood reinforced PVC chowkhats fixed to the columns / stiffeners / walls with necessary holdfast / sleeves etc. as specified and directed at all levels.

Providing, fitting and fixing 24mm/ 29mm thick polymer reinforced moulded PVC door shutters fixed to the chowkath with necessary hinges, screws, bolts etc. as specified and directed at all levels (Door fixtures and fittings to be measured and paid seperately) b) 29mm thick

Providing fitting, hoisting and fixing of roof trusses including purlins fabricated using MS circular hollow section conforming to relevant I.S. code, as per approved design and drawings including providing M.S. cleats, base plates, bolts and nuts and one coat of red oxide Zinc Chromate primer and two coats of approved enamel paints complete including fitting necessary cleats etc. for fixing ceiling joists as per design and drawing as directed. b) Using other ISI marked approved circular hollow section

Providing Pre Painted Galvanized Iron Sheet Roofing (PPGI) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately.) TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement (iv) 0.60 mm thick

Providing Pre Painted Galvanized Iron Sheet (PPGI) accessories (Ridges / Valley / Gutter /Flashing) at all levels including fitting and fixing self drilling, self tapping screws complete complete. TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement (iv) 0.60 mm thick

Providing barge board of size 200mm x 20mm with 1st class local Hollock/ Bonsum timber including fitting and fixing with necessary wood screws etc. complete.

Providing and fixing in position collapsible M.S. shutters with vertical channels 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T-iron 40mmx40mmx6mm with 38mm dia steel pulleys complete with bolts and nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint.

Providing and Fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature(wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i.e. fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer in-charge

Providing plinth protection with bricks flat laid in cement mortar 1: 4 and finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement finish.

Providing drain with cement concrete (1:3:6) 10cm thick sides 10cm thick bed over brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. i). 300mm wide and average 150mm deep with bed slope 1 in 150 with initial depth of 100mm.

Providing and fixing, in position suspended false ceiling using E-Grid (exposed ceiling suspension 2430 system) of grid size 600mm x 600mm/1200mmx600mm with main runner 38 x 24mm, cross tee 29mm ..................................m maximum c/c. The last hanger at the end of each main runner should not be placed at more than 450mm from the adjacent wall. Flush fitting 1220mm cross tee to be interlocked between main runners @ 610mm c/c, so as to form 600mm x 600mm/1200mmx600mm grid, all complete as per the drawing & directions of engineer-in-charge. (i) Using 6 mm thick FC Board

Providing surface preparation for walls, celling etc.using average 1.50 mm thick plaster of paris including clearing, rubbing with sand paper, filling gaps, depression etc. where necessary, with chalk powder and and plaster of paris paste, making the surface even and smooth complete at all levels as specified and directed.

a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

Finishing old / new wall with water proofing weather coat smooth anti-fungal exterior painting of approved make of Berger paint of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats)

Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper. a). With ready mixed "red-lead/ red oxide" primer.

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. (i).Surfaces over 100mm in width or girth. a). General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL

Extra over item 18.1.1(a,b,c) for each subsequent floor or part thereof above first floor level.

Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately)

Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately)

PEDESTAL BASIN (with pedestal)

Providing fitting & fixing stainless steel kitchen sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings ,cutting &making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately

Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified.

Providing, fitting and fixing recessed soap tray / soap dish complete as directed and specified.

Providing, fitting and fixing CP towel rail complete as directed and specified.

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. (iii) 90mm dia.

(iv) 75mm dia.

(vi) 50mm dia

b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (iii) 90mm dia.

(iv) 75mm dia.

(vi) 50mm dia

Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. (iii) 90mm dia.

(iv) 75 mm dia.

(v) 50mm dia

b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (iii) 90mm dia.

(iv) 75 mm dia.

(v) 50mm dia

Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. (iii) 90mm dia.

(iv) 75 mm dia.

(v) 50mm dia

b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (iii) 90mm dia.

(iv) 75 mm dia.

(v) 50mm dia

Supplying fiting and fixing 45degree PVC bend of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. (iii) 90mm dia.

(iv) 75 mm dia.

(v) 50mm dia

b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (iii) 90mm dia.

(iv) 75 mm dia.

(v) 50mm dia

Supplying fiting and fixing PVC Plain single tee of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. (iii) 90mm dia.

(iv) 75 mm dia.

(v) 50mm dia

b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (iii) 90mm dia.

(iv) 75 mm dia.

(v) 50mm dia

Supplying fiting and fixing PVC single ‘Y’ of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. (iii) 90mm dia.

(iv) 75 mm dia.

(v) 50mm dia

b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (iii) 90mm dia.

(iv) 75 mm dia.

(v) 50mm dia

Supplying fiting and fixing PVC cross ‘T’ plain of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. (ii) 75 mm x 75mm

b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (ii) 75 mm x 75mm

Supplying fiting and fixing PVC coupler of (Supreme / Prince)or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. (iii) 75 mm dia

b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (iii) 75 mm dia

Supplying fiting and fixing PVC reducer of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. (vi) 90 mm x 75 mm

b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (vi) 90 mm x 75 mm

Supplying fiting and fixing PVC reducing Tee of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. (iv) 90 mm x 75 mm

b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (iv) 90 mm x 75 mm

Supplying fiting and fixing PVC cleaning pipe of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. in exposed surface or trences as necessary complete at all levels including below G.L. as directed and specified. (c) 75 mm

Providing fitting and fixing PVC cowel of ISI make complete as directed and specified. (iii) 90mm dia. PVC cowel of ISI make

Providing fiting & fixing C.I. Grating to the floors complete as directed and specified. (b) 75mm dia

Supplying fitting and fixing approved uPVC Pipes of different sizes, with all necessary 'R' brand or similar approved P.V.C. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, clamps etc. complete at all levels including below G.L. as directed and specified. SUPREME/ PRINCE/ SFMC BRAND or other equvalent approved brand (High presure pipe Sch-40) b) 40 mm dia

(B) Concealed by chieselling or breaking brick wall/ C.C. wall/ R.C.C. wall and making good to the damaged structure. SUPREME/ PRINCE / SFMC / FUSION BAND or other equvalent approved brand (High presure pipe Sch-40) b) 40 mm dia

Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately)

Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately)

Supplying fitting and fixing Chrome Plated (C.P.) sink cock of approved brand as directed and specified. (G.I. & C.P pipes will be measured and paid separately)

Supplying fitting and fixing Chrome Plated (C.P.) shower 15mm dia. Of approved brand as directed and specified. (Pipes will be measured and paid separately)

Supplying and fitting gun metal country pit valve (full way valve) I.S.I. Make as specified and directed. b) 40 mm dia.

Supplying fitting and fixing gun metal check valve including necessary threads to pipes. b) 40 mm dia (Heavy type)

Labour for test boring with 40mm (internal) dia G.I. Pipes including keeping surplus of earth and every 2.00m after first 3.00m depth and delivering the same in nearest P.W.D. camp in the small tin container (container, scaffolding, tools etc. will have to be arranged by the contractor at his own cost).

Labour for boring hole for inserting tube well pipes through different soil/ rock media including hire charges of drill pipes, scaffolding, tools and plants as necessary and taking out the same and lowering pipes, fittings complete as directed by the Department. vi) Bore hole of 200mm diameter

Supplying, fitting and fixing pipes plain/bevel ended for casing, conforming to relevant IS codes of practice including supplying and fitting of tube well accessories, lowering of assembly pipes concentrically in the borehole followed by supplying and packing of pea gravel free from dirt, dust and other foreign materials in the annular space between the borehole and assembly pipes complete as directed by the Department. vii) 160mm diameter

Supplying, fitting and fixing suction pipes plain/bevel ended, conforming to relevant IS codes of practice including supplying and fitting of accessories, lowering of assembly pipes concentrically in the casing pipes complete as directed. A) G.I. pipe a) TATA / SAIL (Medium)socket should be welded to the pipes. iv) 50mm diameter

Supplying fitting and fixing brass Tez filter 2.00 metre long.

Supplying fitting and fixing check valve (non return valve) including thread to pipes. iv) 50mm diameter

Development of the tube well with compressor or by over pumping unit for 48 hours till sand free discharge is obtained

Flushing, clearing, washing and watering of the tube well

Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes 1000 litre capacity

Labour for erecting and placing PCVCTank over the stagging of 5.00m up to 8.00m complete as directed.

Supplying and placing ferrocement septic tanks of rectangular shape in to pit with manhole cover with cleaning arrangement over single brick flat soling and 75mm 1:3:6 P.C.C. Baffle wall, inlet and outlet etc are provided at suitable points complete as directed. 200 Users

Supplying fitting and fixing iron removal filter filling with treated sand, pebbles, manganishdioxide and other required materials of various filtration rate per hour of DOLPHIN make with all necessary fittings such as valve,bib cock,pipe connection etc.with a free maintanance period of six monthhs (II) 2000 liters capacity

Wiring for light/fan/call bell point with 2*1.5 sq mm P.V.C insulated single core unsheathed industrial cable FR concorming to IS 694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/RR kabel or equivalent make as approved by dept) insurface ?recessed conduit (berlia/akg//precision/presto plast/polycab/MW or equivalent make as approved by dept )including 6 amp flush type switch/bell push GI/MS switchboard (ISI marked ) with phenolic laminated sheet cover , ceiling rose (anchor,penta / gold medal/ kolor kany.kom/Havells or equivalent make as approved by the dept) etc medium point up to 6 meter length

long point up to 10 meter length

Wiring for 5 pin 6amp plug point with 1.5 sq.mm. P.V.C insulated single core unsheathed industrial cable FR conforming to IS 694:1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volt(Finolex/RR Kabel or equivalent mark as approved by the Deptt.) in surface /recessed 2mm thick /heavy rigid ISI marked IS:9537 part-III rigid PVC conduit (Berlia/AKG/Precision/Presto/polycab/MW or Eqivelent make as approved by the deptt.)wiring system including 5 pin 6 amp flush type plug socket and 6 amps and 6 amp F/T switch (Anchor petena/ gold madal/kolor kany.com/havella or equivelent make as approved by the deptt.,G.I /MS switch board ISI mark with phenolic laminated sheet cover including earth continuity with 1.5 sq mm cable to third pin of the plug socket etc as required as complete when placed elsewhere. medium point up to 6 meter

long point up to 10 meter length

Wiring for 5/6 pin 16amp plug point with 4 sq.mm. P.V.C insulated single core unsheathed industrial cable FR conforming to IS 694:1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volt(Finolex/RR Kabel or equivalent mark as approved by the Deptt.) in surface /recessed 2mm .........na/ gold madal/kolor kany.com/havella or equivelent make as approved by the deptt.,G.I /MS switch board ISI mark with phenolic laminated sheet cover including earth continuity with 2.5 sq mm cable to third pin of the plug socket etc as required as complete when placed elsewhere. Long point up to 10.00 metre. Length.

wiring for drawing sub main line with PVC insulated single core unsheathed industrial (multistrand) cable FR comforming to IS 694 : 1990 with flexible bright annealed electrolyte copper con conductor for voltage grade up to 1100 volts (Finolex/RR Kabel or equivalent make as approved by the dept ) iPVC conduit (Berlia /AKG/Precision/Presto Plast/Polycab/MW or equivalent make as approved by the dept )including earth continuity in surface/recessed 20 mm dia thick/heavy ISI marked IS: 9537 PART III rigid PVC conduit wiring system with 2X2.5 sq mm +earth continuity with 1,5 sq mm in 20 mm dia thick/vy rigid PVC IS:9537 Part III conduit

with 2X6 sq mm +earth continuity with 1X1.5 sq mm in 20 mm dia 2 mm thick /heavy rigid PVC conduit wiring system

with 2X16 sq mm +earth continuity with 1X10 sq mm in 32 mm dia 2 mm thick /heavy rigid PVC conduit wiring system

suplying with fitting and fixing sheet steel, phosphatised powder painted dust and vermin proof double door (IP-43) surface mounting TPN MCB DB incorporated with bus bar ,neutral link, earth bar and din rail etc fitted on wall with grounting nuts and bolts as required complete with making necessary connection as approved, specified and directed by the deptt 4 way TPN (4+12) double door

supplying with fitting and fixing SPN 10 Ka 240/415v 50 Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by deptt. 6 to 32A

supplying including fitting and fixing of following AC ceiling fan complete with all accessories like down rod ,canopy etc of following sweep with making necessary connection as approved by deptt as required complete and as directed by department Premium model 1400 mm Sweep. (ORIENT PSPO make) /Premium model 1400 mm Sweep SS-390 Deco. Havells make)

supplying including fitting and fixing of following ac exhaust fan in the existing hole on the wall of following sweep with making necessary connection as approved by deptt as required complete and as directed by dept Domestic Power Flow 225 mm sweep (ORIENT make)

supplying and fixing 18 S.W.G sheet steel metal boxes of the following sizes in surface /recessed wiring system with suitabe size of 3mm thickness phenolic laminated sheet cover on the front face of the box including painting etc as required and specified by the deptt. 200 mm x 350 mm x 60 mm deep (Nominal size

supplying and fixing 32 mm dia 2.0mm average wall thickness heavy rigid PVC IS:9537 PartIII conduit (berlia/AKG/Precision/Presto Plast/Polycab/MW or equivalent as approved by deptt)in recessed system including cutting the wall and making good the same as required

Supplying and fixing of jaguar or equivalent philips/wipro LED round fittings complete withh shade , back plate including connection cable as approved by the deptts etc as required LED Round Light,6W

Supplying and fixing of batten holder including 11w CFL and connection as approved by the deptt. As required

Supplying including installation, commissioning of vermin and dust proof totally enclosed, Phosphatised Powder Painted cubical indoor type floor/wall mounting compartmentalize panel board of size 1.25M X0.7MX 0.40M made of 16 SWG1.66 m thick C.R. sheet and 35mm X 35mm X 5mm size angle having 4 no legs at the bottom. The panel board is to be erected in 1 : 3 : 6 PCC foundation including brick soling / grouting etc. complete neatly Wiring done with provision for one no 250A 4pole 415V MCCB or Switch Fuse Unit as incomer and provision for 2nos DP or TPN out going as specified and directed by the deptt. confirming to IP 43 protection comprising of the following electrical items:

Supply, installation and testing of copper plate earth station with 600 mmX 600mx 6mm heavy duty copper earth plate with necessary40 mm dia G.I fitting such as socket, tee , elbow , nipple and 50mmx 40mmX GI reducing socket for funnel including locking arrangement with 300 mmX 300mmX6mm C.I hinred cover plate complete with digging of earth pit, construction of brick chamber and plastering of both inner and outer surface of wall as specified and directed by the deptt

Supply and laying of following size power/control proper copper cable, solid copper conductor, XLPE insulated, core laid up, PVC tape inner sheathed unarmoured/armoured(galvanised for cable upto 10 x 1.5 sqmm. 8 x 2.5 sqmm.2 x 10 sqmm.3x10sqmm.4x6sqmm balanced all galvanised steel strip)extruded PVC type ST2 sheathed,650/1100 V grade as per IS: 7098 (part-1) 1988 UG cable laid in ground/partially in air(as required for termination over ground including excavatuion of cable trench upto of 75cm, refilling productive covering sand cushioning etc. complete handling of surplus spoil, debries, etc. to proper place as specified and directed by deptt.(Nicco/Havells/RPG/CCL/Polycab/Gloster/Finolex make all equivalent. 50.00 Sq. mm.3 & 1/2 Core U.G. armoured cable

Supplying including installation, connection as approved by the Deptt., testing and commissioning of SUBMERSIBLE PUMP SET, Single Phase with steel cable rope and submersible cable complete as directed and specified by the deptt.

Supplying fitting and fixing including necessary connection as approved by the Deptt.)of Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make) of following type and capacity as specified and directed by the Department. ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make)

Agency Charge

Sri Babul Kumar Das

CHAKRADHAR BARO