PROVN OF VOCATIONAL LAB AT KENDRIYA VIDYALAYA NO. 1 AND 2 AT MIL STATION JHANSI UNDER GE JHANSI

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8 D-2 (40mm graded stone aggregate) as in sub base complete all as specified and directed

M&L for factory made PU coated, machine pressed precast concrete interlocking paver or cobel block of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with no pigment made of PVC moulded (or rubber mould) with vibrating system, with and including 50mm thick sand cushioning complete all as specified and directed. Note : The cost of sand cushion is included in quoted rate.

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation ,shafts wells etc n exc 10 sqm on plan and getting out in hard/ dense Soil complete all as specified and directed.

Excavation in trenches, not exceeding 1.5 M wide and exceeding 1.5 M depth and not exceeding 3 M for foundation, etc., and getting out in any type of soil.

Excavation over areas, n, exc 1.50m deep and getting out in any type of soil including pipe line complete all as specified and directed.

All as per item No 5 above but depth exe 1.5 mtr and not exe.3 mtr and in any type of soil

Excavation over areas, exc 3m and not exc 4.50m and getting out in disintegrated rock including pipe line complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified and as directed by the Engineer-in-Charge

Removing excavated soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed by the Engineer-in-Charge

M & L Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed.

M&L Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.

M&L for cement concrete in foundation filling and mass concrete type C2 1:3:6 (using 40 mm graded stone aggregate) complete all as specified and as directed

M&L for cement concrete type B1 1:2:4 (20 mm graded stone agg) as in coping & in bedding & haunching against the side of wall of manholes complete all as specified and directed.

M&L for providing precast cement concrete type B1 1:2:4 (20 mm graded stone agg) as in landings, cover slab(for manhole etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces in set CM 1:4 complete all as specified and directed.

M&L Type D-2 1:4:8 ( using 40 mm stone aggregate) cement concrete in foundations, filling and mass concrete complete all as specified and directed.

M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as Foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in columns complete all as specified and directed.

M&L for reinforced cement concrete of M-25(Design Mix) 20 mm graded aggregate as in slabs supported on walls,beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in chajja complete all as specified and directed.

M&L for formwork to sides of concrete foundations,footings and plinth beams for flat rough finished surfaces of concrete complete all as specified and directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.flat rough finished surfaces of concrete complete all as specified and directed.

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions flat rough finished surfaces of concrete complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs for flat rough finished surfaces of concrete complete all as specified and directed.

M&L for High Strength deformed TMT bars 10 mm dia and over, cut to length, bent to shape reqiured including carncking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and directed.

All as per item No 25 , but 6mm to 8mm dia.

M&L for High Strength deformed TMT bars 5 mm dia and over upto and including 10 mm dia stirrups, spacers and binders, cut to length, bent to shape reqiured including carncking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and directed.

M&L for Brickwork with sub-class 'B' bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed

M&L for Brickwork with sub-class 'B' bricks in one brick thick honey comb walling built in CM 1:4 complete all as specified and directed

M&L for brick work with fly ash bricks, straight or curved on plan exc. 6 M mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for Damp proof course 40 mm thick in cement concrete 1:2:4, type B-0 to horizontal or vertical surfaces including necessary formwork

M&L for two coats of oil emulsion distemper on walls white or tinted incl preparation of new surfaces & priming plastered surfaces with alkali resistant priming paint complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished with 3mm wall care putty on wall complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for two coat of cement base paint for external faces of walls including preparation of new surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick on fair faces of concrete surfaces in ceilings in cement mortar 1:3 and finished fair and even without using extra cement complete all as specified and directed.

M&L for two coats of oil emulsion distemper on ceiling white or tinted incl preparation of new surfaces & priming plastered surfaces with alkali resistant priming paint complete all as specified and directed.

Moorum/ red bajri filling in floors or pavings,laid in layers n exc 15 cm th,spread,levelled and rammed including watering complete all as specified and directed.

M&L hard core of gauge nexc 63mm, deposited, spread and levelled inlayers nexc 15cm thick, watered and rammed to a true surface of broken stone or boulder complete all as specified and directed.

M&L for 75 mm thick PCC flooring in cement concrete Type D-2 (1:4:8) complete all as specified and directed.

M&L Screed bed or bedding layer of cement mortar 15 mm thick for laying floors finishes in cement mortar 1:6 complete all as specified and directed.

M&L non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L 10 mm thick rendering in CM 1:4 on brick masonary wall and surfaces rough finished to receive tiles complete all as specified and directed.

M&L glazed ceramic tiles coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in skirting, dados and risers to steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L granite tile 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white/coloured cement with admixture of pigment to match the shade of granite stone including cutting and polishing etc complete.Note : screed bed layer of cement mortar shall be measured seperately

Rounding to edges of stone slabs one edge such as in steps cooking platform and other similar work

S&F Continuous (piano) hinges 30 mm wide flap, mild steel, bright finish or electrogalvanised

M&L for Prelaminated particle board 18/19 mm thick, interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work

S & F 125 mm long Extruded Aluminium alloy handles, fabricated type, anodised.

S & F 125 mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws

S&F Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm

S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S & F 35 mm thick second class hard wood factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars) chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Pt I Section 8, clause 8.24 (a) complete all as specified and as directed.

S & F 35 mm thick second class hard wood factory made,Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

M&L for preparation of new or previously untreated wooden surfaces of any description exc 10cm in width or girth with one coat of pink primer and two coats of synthetic enamel paint complete all as specified and as directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm complete all as specifed and directed

M&L for box type steel window with 80x40x1.25 mm MS tubular frame with side hung shutters ( double shutter for glass and gauze) without sash bars jointed together with and incl grill using 12 mm square bar @ 10 cm C/C incl box type hinges with steel handle and steel pag stay complete glazing bars doweled and welded complete all as specified as directed. Note:- (a) The 4.0 mm thick plain glass and wiremesh of 0.56 mm in nominal dia of wire and average width of aperture 1.18 mm are included in quoted rates. (b) Side hung Z-Section shutter shall be of size 20mm x 20mm x 25mm and 3 mm thick.

M&L two coat of synthetic enamel paint over one coat of red oxide primer on new steel surfaces, girth or width exc 10cm complete all as specified as directed.

M&L for cement concrete 1:3:6 Type C2(40 mm graded aggregate) 100 mm thick as in plinth protection and finished the concrete surfaces even and smooth without using extra cement complete all as specified as directed.

M&L of water proofing treatment to non-accessible roof slab with APP based modified polymeric membrane centre core 100mm micron HMHDPE outer film 20 micron each having thickness 3mm weight not less than 3kg/Sqm as per manufacturer’s instructions laid with torch application complete all as specified and directed by Engineer-in-Charge with following course of description below:- (a) 10 mm thick plaster in CM 1:4 with WPC (liquid water proofing compound @ 0.20 Ltr/bags(50 Kg Bag)) will be applied over the roof slab (subjected to condition as mentioned in notes) . After the plaster is cured the roof will be tested for water tightness by ponding with water for seven days for any seepage is observed the rectification will be carried out by pressure grouting under the pressure of 5kg/sqcm using cement based grout. After the surface is repaired the slab will be tested for water tightness again before proceeding with further treatment. (b) the surface of roof, parapet and gutters, drain mouths, etc. over which waterproofing treatment is to be applied shall be cleaned of all foreign matter such as, fungus, moss, dust etc by wire brushing and dusting. For cast iron drain outlets a groove shall be cut around to tuck in the treatment. Concrete angle-fillets shall be provided at junctions between roofs and vertical faces of walls (parapet and other walls) around obstacles such as pipes, chimney stacks, etc. and other similar situation to ease up about corners. (c) Bitumious based primer confiorming to IS: 3384 @ 0.3 kg/Sqm to be applied on prepared surface, till the surface is propely impregnated. (d) After the application of approved bituminous primer the water proofing membrane shall be laid on the primed surface by torch application method as per manufacturer's instruction. The overlap while toching shall be 100mm in longitudinal direction and 100 mm in transverse direction. All overlap joints shall be sealed thoroughly by thermo fusing both the membrane layer and seling it with the help of hot trowel. The overlap joints shall be made as a monolithic layer. (e) All joints and changes in direction should be curved with cement mortar 1:3 mixed with SBR latex @ 200ml per bag of cement and cured well before laying the membrane. (f) after apllication of APP membrane one coat of aluminium paint @ 0.20 Kg/Sqm over APP membrance will be applied Note : The cost of all items i.e. from Sr No. (a) to Sr No.(f) are included in quoted rate and no separate payment will be done for the above except liquid WPC.

S&F in vitreous china wash basin Flat Back 550x400mm excluding taps, chain and plug and porceilein stopper but incl brackets cutting for and pinning in ends of brackets or errecting stand, CP waste coupling of suitable size with long shank and bracket grouted in CM 1:2 in wall incl waste pipe completed all as specified and directed.

S&F in chromium Plated cast copper alloy pillar tap with capston heads fixed to iron pipes 15mm dia completed all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 300mm completed all as specified and directed.

S&F stop valve, 15 mm bore dia fancy type chromium plated with long shank high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed as specified and directed

S&F 15mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors/trenches complete all as specified and as directed by the Engineer-in-Charge

S&F 20mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors/trenches complete all as specified and as directed by the Engineer-in-Charge

S&F 50mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors/trenches complete all as specified and as directed by the Engineer-in-Charge Note for Item No. 66 to 68 : 1. The excavation & earthwork shall be measured & paid for separately. 2. The cost of all type of GI fitting i.e. bend, tee, elbow, reducer, union, nipple etc is deemed to be included in quoted rates.

S&F Grating doom 100 mm dia of PTMT (Minimum weight 100 gms) complete all as specified and as directed by the Engineer-in-Charge

S&F for Low density polyethylene pipes of Bore 32 mm of pressure rating 6 kgf/cm2 fixed complete to walls ,ceilings or in floors complete all as specified and as directed by the Engineer-in-Charge

S&F 500 Ltrs rotational moulded polyethylene water storage tanks (cylindrical, vertical with closed top) hoisted and fixed in position, all as specified in SSR Pt-I complete all as specified and as directed by the Engineer-in-Charge

S&F 20mm ball brass valves, high pressure, with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed by the Engineer-in-Charge

S&F 20mm gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed by the Engineer-in-Charge

S&F 50mm gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed by the Engineer-in-Charge

M&L for 100 mm butt hinges stainless steel medium weight of approved make ISI marked complete all as specified and as directed by the Engineer-in-Charge

S&F 150mm aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed by the Engineer-in-Charge

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed

S&F 150mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F floor door stopper of aluminium alloy body & tongue, anodised, with hard drawn steel spring of 140mm size fixed in floor complete all as specified and directed.

S & F Aluminium body door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851 oto 1000 mm in width and of weight between 61 to 80 Kg complete all as specified and directed.

M&L for providing concrete bed to drain pipe 150mm dia including forming cradles, in cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate)

S&F reinforced cement concrete pipes, class NP3, 150mm bore of pipe laid and jointed complete with collars complete all as specified and directed

M&L for loose filling with broken brick bats of gauge 40 to 80mm for soak well complete all as specified and directed

M&L for 150mm soil glazed stoneware drain pipes laid in trenches and jointed complete all as specified and directed.

Providing and fixing SFRC (Steel fibre Reinforced Concrete) cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter confirming to IS-12592, total weight of cover and frame not less than 182 Kg fixed in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate complete all as specified and directed.

M&L for DWCPE (SN8) 200(OD)mm / 175(ID)mm complete laid in trenches including earthwork, removal and returning filling and jointed including testing along with necessary jointing material tees / union / socket etc complete laid on PCC bed 150mm thick PCC in 1:2:4 type B0 of average depth 2m including packing under and haunching against the side of pipes after they are laid and tested complete all as specified and directed

Supply and fixing MS clamp made out of 100mm x 5mm with 50mm dia hole for taking branch connection with and including fixing of 50mm dia GI socket duly welded complete including fixing of clamp on existing CI/DI pipe line of size 200/250 dia with suitable rubber gasket packing to ensure leak proof joint and suitable nuts, bolts and washers etc complete all as specified and directed by Engr-in-charge.

M&L for cutting of existing road / hard standing up to 15 cm depth for laying of pipes, and making good the disturbed surfaces by providing PCC 1:2:4 type B-1 after laying of pipes and returning filling of soil, complete all as specified and directed.

M&L for Point wiring with 1.5 Sqmm FRLS insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core conforming to IS:694 along with one run of 1.5 Sqmm FRLS insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm concealed in wall/ floor etc including provision of electrogalvanised terminal box of thickness not less than 18 SWG, with earth dolly of suitable size concealed in wall and covered with 3 mm thick phenolic laminated hylam sheet fixed with brass /GI screws for mounting switches, sockets, fan regulator, etc. complete all as specified and directed by Engineer-in-Charge for the following points:-

One light point controlled by one switch

One ceiling fan controlled by one switch

One exhaust fan controlled by one switch

One 6A socket point controlled by one switch on independent board

One 6A socket point controlled by one switch on same board

All as per srl item no. 89 here-in-before but with 2.5 sq mm FRLSH copper wire with 2.5 Sqmm FRLSH copper earth wire for one 16 Amp socket point controlled by one 16 Amp switch on independent board complete all as specified and directed.

All as per srl item no. 89 here-in-before but with 4.0 sq mm FRLSH copper wire with 4.0 Sqmm FRLSH copper earth wire for one 16 Amp socket point controlled by one 16 Amp switch on independent board complete all as specified and directed..

M&L for Circuit/submain wiring alongwith earth wire 2 runs x 6 sqmm + 1 run x 6 sqmm with FRLSH insulated copper conductor, single core cable drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm concealed in wall/ floor etc complete all as specified and directed by Engineer-in-Charge. Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length

M&L for Circuit/submain wiring alongwith earth wire 2 runs x 4 sqmm + 1 run x 4 sqmm with FRLSH insulated copper conductor, single core cable drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm concealed in wall/ floor etc complete all as specified and directed by Engineer-in-Charge. Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length

S&F, Switch piano type, single pole, one way, 6 amps, 240 volts, complete all as specified and directed.

S&F, Switch piano type, single pole, one way, 16 amps, 240 volts, complete all as specified and directed.

S&F, Socket, 6 pin, 6/16 Amp, multipurpose 240 volts, complete all as specified and directed.

S&F, Socket, two-in-one, 5 pin, 6 Amp, universal type, 240 volts, complete all as specified and directed.

S&F, Ceiling rose, three terminals, bakelite body, 240 volts, complete all as specified and directed.

Supply and fix electronic fan regulator in 5 steps, 240V, 50Hz complete all as specified and directed.

Supply and fix LED batten box type with CRCA sheet steel body pre-wired suitable for and including provision of 1x20 watt (4 feet) retrofit LED tube with PC body and connecting up with twisted three core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified and directed by Engineer-in-Charge.

Supply and fixing ceiling fans complete with aluminium blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and fix modular MCB protected plug and socket board in sheet steel enclosure with 25A rated mini MCB and 25A rated 3 pin plug, 240 V, 50 Hz complete including cutting the wall surfaces for flush mounting of socket board and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed by Engineer-in-Charge.

Supply and fix of exhaust fan with steel body 300mm sweep with blade , frame and louvers , single phase, 230 volts, 50 Hz. including taking down existing unserviceable exhuast fan of any description complete all as specified and directed. Note :- Old and u/s exhaust fan deposited to E/M yard store as a govt property.

Supply and fix LED building security light fitting 35 watts with high efficiency long life LEDs with In-built electronic driver complete housed in pressure die-cast aluminium housing covered with polycarbonate cover with IP 65 degree of protection including GI pipe bracket made up of 25mm dia medium grade GI pipe of length 1.50m bent to required shape and fixing on walls with suitable MS clamps(02Nos) made up of 25mmx4mm MS flat, nuts, bolts and washers and provision of 3 core twisted flexible copper cable 0.5 sqmm from ceiling rose to connector of fitting complete all as specified and as directed by Engineer-in-Charge.

Supply and fix MCB distribution board, SPN, 8 way 230 Volt in sheet steel powder painted enclosure double door type with IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB all as specified and directed by Engineer-in-Charge. Note: MCBs shall be measured and paid separetely.

S& F MCB SPN 40 Amp, 10 KA, 'C' curve, 230 V, 50 Hz completed all as specified and directed.

S& F MCB SP 6-32 Amp, 10 KA, 'C' curve, 230 V, 50 Hz complete all as specified and directed.

M&L for Earthing complete with galvanised iron earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connecting to GI wire 4 dia mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel and earth wire protected by 15mm dia GI pipe medium grade and connected to distribution board/earthing test point all as shown in electircal plate No. 3 of SSR Part-I(2009) and testing on completion complete all as specified and directed. Note :- (a) The unit rate quoted shall also include for excavation, earth work in any type of soil, plain cement concrete 1:3:6 mix, Type C1 pit, 40mm thick RCC 1:2:4 mix type B1 cover reinforced with 8mm dia TMT bras @ 150mm C/C both ways, GI funnel with watering pipe, wire mesh,protection pipe, earth wire upto 7.50m long complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub heading earthing, specified in SSR Part II. (b) Earthing result should be less than 5 Ohm required.

Supply and fix MCB distribution board, TPN, 4 way 415 Volt in sheet steel powder painted enclosure double door type with IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed. Note: MCBs shall be measured and paid separately.

S& F MCB TPN 63 Amp, 10 KA, 'C' curve, 415 V, 50 Hz completed all as specified and directed.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or strip and overall PVC sheathed, 25 sq mm 4 core in service connections as per IS 7098(Part 1) including connecting on LT OH line / LT panel /DB with suitable lugs, glands, binding wire etc including taking down existing service cable of any description complete all as specified and directed.

Material and labour for Double wall corrugated HDPE pipe, PN-10 ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etc for protection of LT cable XLPE grade 1100 volts complete all as specified and directed by Engineer-in-Charge.

M/S Kumar Contractors (BID ID -3319403)

classic contriction co. (BID ID -3322152)

ADARSH ENTERPRISES (BID ID -3320346)

HARNAM SINGH ANIL SINGH (BID ID -3322449)

VIJAY BUILDERS (BID ID -3322070)

FTH TRADERS (BID ID -3322095)

m/s ramesh saran agarwal (BID ID -3321875)