CERTAIN B/R REPAIRS SUCH AS FLOORING, JOINERY, PLASTERING, PLUMBING, SANITARY FITTINGS, FALSE CEILING AND ROOF TREATMENT INSIDE FORT AREA IN ZONE A AREA UNDER GE CHENNAI

Amount

M&L for brick work straight or curved on plan exceeding 6 metre mean radius using old size fly ash bricks built in cement mortar (1:6) all as specified and directed.

M&L for brickwork with old size fly ash bricks straight or curved on plan to any radius in half brick thick walls in cement mortar (1:4) complete all as specified and directed.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and the like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite stone including cutting & polishing including provision of hole for gas pipe including dismantling the old stone complete all as specified and directed.

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area n. exc. 1.5 sqm each along with fittings including separating guard bars/ grills/ wire mesh etc. complete all as specified and directed.

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exc. 1.5 sqm but n. exc. 4.0 sqm each along with fittings including separating guard bars/ grills/ wire mesh etc. complete all as specified and directed.

Taking down shutters of any description n. exc. 1 Sqm each including fittings complete all as specified and directed.

Taking down shutters of any description n. exc. 1 Sqm each and resecuring in the same opening after cutting, easening etc. complete as specified and directed.

Taking down shutters of any description exc. 1 Sqm but n. exc. 2 Sqm each including all fittings complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm but n. exc. 2 Sqm each and resecuring in the same opening after cutting, easening etc. complete all as specified and directed.

S&F 2nd class hardwood plain solid straight chowkats and frames wrought, framed, rebated on solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on Front and back face, supplying and fixing in frame at site complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge mitred cut at two corners and joined by inserting two No. 150mm long brackets of 15mm x 15mm MS square tube inside the 19mm x 19mm square tube fixed to wall by drilling and providing 100mm long MS screws with PVC fasteners complete all as specified and directed.

S&F 2nd class hardwood plain framed panelled door shutters 35mm thick, (any No of panels) with panels of timber flat on both sides (feather edged) or 12mm veneered particle board commercial veneering on both faces, the size of rail and stile as per IS:1003 (Part-I), kiln seasoned & chemically treated and fitted to chowkats complete all as specified and directed.

S&F 2nd class hardwood glazed and skeleton door shutters 30mm thick divided into squares open rebated and prepared to receive glass, gauge etc. edges of framing plain, chamfered, rounded fitted with cut and mitered beads for securing glass etc, size of members as specified in SSR Pt 1 section 8 clause 8.24(a) supplied and fitted to chowkats with plain, chamfered or rounded mitered and rebated sash bars any numbers, complete all as specified and directed.

S&F for 2nd class hardwood glazed and skeleton window/ ventilator shutters 30mm thick divided into squares open rebated and prepared to receive glass, gauge etc. edges of framing plain, chamfered, rounded fitted with cut and mitered beads for securing glass etc, size of members as specified in SSR Pt 1 section 8 clause 8.24(b) supplied and fitted to chowkats with plain, chamfered or rounded mitered and rebated sash bars any numbers, complete all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section 125mm long all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section 200mm long all as specified and directed.

S&F in repairs aluminium anodised barrel tower bolt of extruded section 125mm long all as specified and directed.

S&F in repairs aluminium anodised barrel tower bolt of extruded section 200mm long all as specified and directed.

S&F aluminium alloy anodised sliding door bolts 300mm long with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

S&F mild steel butt hinge, medium weight cold rolled 75mm size all as specified and directed.

S&F mild steel butt hinge, medium weight cold rolled 100mm size all as specified and directed.

S&F in repairs mild steel butt hinge, medium weight cold rolled 75mm size all as specified and directed.

S&F in repairs mild steel butt hinge, medium weight cold rolled 100mm size all as specified and directed.

S&F continuous piano hinge mild steel bright finish or elactro-galvanized width of flap (when open) 30mm complete all as specified and directed.

S&F extruded aluminium alloy handle cast type anodised 125mm size all as specified and directed.

S&F extruded aluminium alloy handle cast type anodised 150mm size all as specified and directed.

S&F in reapirs extruded aluminium alloy handle cast type anodised 125mm size all as specified and directed.

S&F in repairs extruded aluminium alloy handle cast type anodised 150mm size all as specified and directed.

S&F in repairs floor door stopper, 140mm overall length of cover plate of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified and directed.

S&F hasp and staple 125mm size, aluminium anodised safety type with mild steel hinge pin including bolt to hinge plate fixed with screws complete all as specified and directed.

S&F in repairs aluminium (Die cast) body door closer hydraulically regulated, designate No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kg all as specified and directed.

S&F floor mounted door closer, heavy duty with pivot and connected accessories, satin stainless steel finish, sustainable for long duration and suitable for 12mm thick toughened glass shutters all as per BTS 80 series of Dorma or equivalent of PAG or any other reputed make as approved by GE fixed in repairs complete all as specified and directed.

S&F fully glazed door shutter made out of 12mm thick toughened glass suitable for opening n. exc. 1.20m wide, drilling holes for fixing handles including provision of 02 No. 400mm long stainless steel matt finished handles, suitable locking arrangement, centre lock, stainless steel floor spring, patch fitting consisting of bottom patch and top pivot with stainless steel fixing plate etc. including taking down existing shutter complete all as specified and directed. Note: The unit rate shall be deemed to include all necessary builder's hardware complete.

S&F in repair floor locking arrangement with brass lock and complete accessories suitable for 12mm thick toughened glass door with complete accessories of make Dorma/ PAG or other reputed make as approved by GE complete all as specified and directed.

S&F aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed to wood/ steel frames with aluminium wire staples complete all as specified and directed.

All as per item No. 36.00 above but fixed in repairs.

S&F in repairs mild steel mortice lock vertical type 4 levers of size 100mm with stainless steel handle set suitable for right or left, inside or outside for opening doors fixed with brass screws complete all as specified and directed.

S&F in repairs mild steel 300mm, ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.

S&F aluminium powder coated designer curtain rods (draw berms rods) 19mm dia exterior grade, 3mm thick with holding clamps and fixed to wall with PVC rawl plug and brass screws including taking down the existing curtain rod of any description complete all as specified and directed.

S&F aluminium powder coated designer brackets for curtain rod suitable for aluminium powder coated designer curtain rod all as specified and directed.

S&F rolled mild steel roof trusses (framed), trussed purlins, crane gantries, rails & fastenings & heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Gde Fe 410-W (Gde-E-250) quality-A complete all as specified and directed.

M&L for mild steel work in bands, straps, supports of stays, sunshade brackets, hook and pintle hinges, clamps, hold fasts, guard bars, grills bolts etc and similar conforming to FE-290, Gde E 165 complete all as specified and directed.

S&F Pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength 550Mpa as in roof covering fixed with self tapping screws as per manufacturer’s instruction complete all as specified and directed.

S&F push pull type or manual rolling shutter of lath thickness 1.00mm including top cover, anchoring rod, hasp & staple etc. without ball bearing erected in position as in repairs complete all as specified and directed.

S&F ball bearing for rolling shutter all as all as specified and directed.

S&F rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) & hanging; also fastening & fixing Fe-410-W (Gde E-250) quality- A complete all as specified and directed.

S&F anodized aluminium powder coated (minimum thickness of powder coating 50 micron) side hung window shutter with sash bars of aluminium section for frame work not less than 0.55 Kg/ RM including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beads, etc. each shutter duly fixed with anodised aluminium fittings such as 01 No. peg stay 150mm long, 02 No. hinges type B2, handle 01 No. complete all as specified and directed. Note: Glass pans and wire mesh will be measured and paid for separately.

S&F anodized powder coated aluminium (minimum thickness of powder coating 50 micron) frames for doors, windows and ventilator with one or more rebates including joining cleats for fixing complete all as specified and directed.

S&F anodized aluminium powder coated (minimum thickness of powder coating 50 micron) panelled door shutter of aluminium section for frame work not less than 0.55 Kg/ RM including necessary joining cleats, glazing clips, rubber neoprene packing, 2 No. 150mm long handles, 02 No. 200mm long tower bolts, 03 No. aluminium B21 hinges and 01 No. aluminium mortice lock in each door, fully glazed for providing glass panes, prelaminated particle boards etc. including anodised aluminium snap beads, screws etc. complete all as specified and directed. Note: Glass panes and prelaminated particle board shall be measured and paid for separately under appropriate item of this BOQ.

S&F aluminium anodised powder coated (minimum thickness of powder coating 50 micron) window security grills with frame 6mm thick 75mm aperture fixed with joining cleats etc. complete all as specified and as directed.

S&F pre-laminated particle board 18/ 19mm thick, interior grade pre-laminated on one side with decorative choice lamination and other side balancing white lamination fixed with screws as in cupboard shutters and shelves etc. fixed in repairs complete all as specified and directed.

M&L providing Gypsum board false ceiling using 9mm thick Gypsum board tiles of size 60cm x 60cm with aluminium laminate finish on one side and vinyl laminate finish on other side, fixed with screw on snap grid frame work using 'T' and angle sections made out of aluminium sections bent to shape required as in main member, secondary members, perimeter angle section including provision of GI wire suspender of size not less than 4mm dia fixed to roof members @ 1200mm c/c both ways complete all as specified and directed. Note: The unit rate quoted shall be deemed to include the cost of taking down and re-fixing of the electrical fittings such as ceiling fan, light fittings etc. and safe custody of same till re-fixing complete.

M&L 40mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in flooring, finished even and smooth using extra cement complete all as specified and directed.

S&F glass dividing strips 38mm wide, 3mm thick inserted in position conforming to design complete all as specified and directed.

M&L 75mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness M-35 grade with grey cement and no pigments laid as per manufacturer's instructions including dismantling of existing tiles complete all as specified and directed.

Demolition of floor hearth or wall tiling including cement mortar bedding (but not backing) and removing the debris outside MD land and rubbish of the premises complete all as specified and directed.

M&L for vitrified light shade coloured ceramic tiles 8 to 10mm thick (Square/ Rectangle) area of each tiles n. exc. 0.36 sqm in floors etc.; set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.

All as per item No. 59 above but on vertical surfaces such as skirting, dados and risers as in steps etc. laid over and including 10mm thick rendering in cement mortar (1:4) complete.

M&L non skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc. 0.06 Sqm but n. exc. 0.11 Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

M&L glazed coloured ceramic tiles of size 350mm x 250mm x 7mm/ 450mm x 300mm x 7mm thick laid on vertical surfaces set and jointed in neat cement slurry and pointed in coloured cement to match the tile laid over and including 10mm thick backing coat in cement mortar (1:4) complete all as specified and directed.

M&L for joint free non skid coloured ceramic tiles 7mm to 8mm thick (Square/ rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

All as per item 63.00 above for work on vertical surfaces such as skirting, dados and risers as in steps etc., laid over and including 10mm thick rendering in cement mortar (1:4) complete.

M&L for complete removal of the existing water proofing treatment of any description, cleaning the top surfaces of roof with wire brush and washing with hydrochloric acid to remove dust, oil, grease, loose particles etc and provide water proofing treatment with membrane type water proofing method using APP modified prefabricated five layer water proofing membrane matt finish 3mm thick and weighing not less than 3.6 Kg/Sqm reinforced with non woven polyester matt black finished over one coat of bitumen primer at 0.40 ltr/sqm and torch application of membrane using gas burner with 100mm overlap as per manufacturer's instructions with top most layer of surface finished with two coats of solar reflective aluminium paint @ 0.10 ltr/sqm per coat etc. including 10mm thick rendering in cement mortar (1:4) mixed with and including WPC over 30mm thick (average thickness) PCC (1:2:4) type B-0 using graded stone aggregate as in padding including carrying out ponding test complete all as specified and directed.

M&L for chequered coloured (Designer) cement concrete tiles 40cm x 40cm x 25mm thick set, jointed and pointed in neat cement slurry as in floors with grey cement and no pigment laid over and including 15mm thick screed bed in cement mortar (1:6) including dismantling of existing tiles complete all as specified and directed.

Taking down cement plaster on brick work or stone walls etc including racking out of joint, hacking for key, scrubbing down with water etc. and removing the debris outside MD land complete all as specified and directed.

M&L rendering 15mm thick in cement mortar (1:6) on fair faces of brick/ concrete surface finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 5mm thick in cement mortar (1:3) on ceiling finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15mm thick in two coats i.e. 1st coat 10mm thick in cement mortar (1:6) and 5mm thick finishing coat in cement mortar (1:4) mixed with and including PIDI PROOF LW compound @ 200ml per bag and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L preparation of newly plastered or previously untreated surface of ceiling and applying three coats of white wash complete all as specified and directed.

M&L preparation of newly plastered or previously untreated surface of walls and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer over 2 to 3mm thick wall care putty complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of weather proof exterior acrylic emulsion paint (Apex of Asian or Weather coat of Berger or equivalent of other specified makes) over a coat of white primer complete all as specified and directed.

M&L preparation of newly plastered or previously untreated surface of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

S&F sheet glass 4mm thick plain ordinary quality and glazing with oil putty wooden beads as directed in squares n. exc. 0.50 Sqm in each pane complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds all as specified and directed.

M&L preparation of new wooden or wood based surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L preparation of new steel surfaces of any description not otherwise described over 10cm girth or width and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials, steel and iron works new or old treating ends of posts, back of chowkats etc with tar or coal tar black paint area tarred exc. 0.1 sqm but n. exc. 0.5sqm each complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials, steel and iron works new or old treating small articles such as hold fast etc with tar or coal tar black paint area tarred n.exc 0.1sqm each complete all as specified and directed.

S&F galvanised steel water tubing 15mm bore medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc. fixed to walls, concealed in walls/ ceilings or laid in floors etc, including taking up or down the existing GI tubing complete all as specified and directed.

All as per item No. 82.00 above but 20mm bore.

All as per item No. 82.00 above but 25mm bore.

S&F 500 ltr capacity three layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including dismantling existing OHT complete all as specified and directed.

S&F 1000 ltr capacity three layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including dismantling existing OHT complete all as specified and directed.

S&F 2000 ltr capacity three layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including dismantling existing OHT complete all as specified and directed.

S&F ball valve PTMT with epoxy coated aluminium rod for 20mm bore pipe, weight not less than 210gms, high pressure with polyethylene high density float and complete screwed for iron pipe including taking down old one complete all as specified and directed.

S&F ball valve PTMT with epoxy coated aluminium rod for 25mm bore pipe, weight not less than 455gms, high pressure with polyethylene high density float and complete screwed for iron pipe including taking down old one complete all as specified and directed.

S&F 15mm dia bib taps brass chromium plated, fancy type, long body with flange with crutch or butterfly handle screwed down, screwed for iron pipes or for brass ferrule and fixed in repairs complete all as specified and directed.

S&F 15mm dia fancy type pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes fixed in repairs complete all as specified and directed.

S&F in repair PTMT bib tap with flange plate as per Cat No. 123-H of Prayag or equivalent from other makes specified in particular specifications suitable for 15mm bore pipe complete all as specified and directed.

S&F in repair PTMT pillar tap fancy type as per Cat No. 1311-H of Prayag or equivalent from other makes specified in particular specifications suitable for 15mm bore pipe complete all as specified and directed.

S&F in repair PTMT angle cock with flange plate as per Cat No. 144-H of Prayag or equivalent from other makes specified in particular specifications suitable for 15mm bore pipe complete all as specified and directed.

S&F in repair PTMT 2-way angle cock with flange plate as per Cat No. 145-H of Prayag or equivalent from other makes specified in particular specifications suitable for 15mm bore pipe complete all as specified and directed.

S&F in repair PTMT grating 100mm dia as per cat No. 111 of Prayag or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F in repair PTMT grating 125mm dia as per cat No. 113 of Prayag or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F 15mm dia brass stop valve/ angle valve chromium plated fancy type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed in repairs complete all as specified and directed.

S&F in repairs cover for rotational moulded polythelene water storage tank of any capacity with locking arrangement and fixed in position complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall etc. including demolition and breaking up existing pipe complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floor/ trenches etc. including demolition and breaking up existing pipe complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall etc. including demolition and breaking up existing pipe complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floor/ trenches including demolition and breaking up existing pipe complete all as specified and directed.

S&F PVC (SWR) bend any radius with access door suitable for 110mm dia pipes complete all as specified and directed.

S&F PVC (SWR) bend any radius with access door suitable for 75mm dia pipes complete all as specified and directed.

S&F in repairs PVC (SWR) branch piece single (single 'Y') equal or unequal 110mm bore with access door complete all as specified and directed.

S&Fin repairs PVC (SWR) branch piece single (single 'Y') equal or unequal 75mm bore with access door complete all as specified and directed.

S&F PVC (SWR) junction single (single 'T') equal or unequal 110mm bore with access door complete all as specified and directed.

S&F PVC (SWR) junction single (single 'T') equal or unequal 75mm bore with access door complete all as specified and directed.

S&F in repairs PVC (SWR) vent cowl suitable for 110mm bore vent pipe complete all as specified and directed.

S&F in repairs PVC (SWR) vent cowl suitable for 75mm bore vent pipe complete all as specified and directed.

M&L for PVC (SWR) floor trap 110mm dia plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repairs waste coupling for stainless steel sink provided with locking arrangement as per cat No. SA 03 of Prayag or equivalent from other makes specified in particular specifications all as specified and directed.

S&F in repairs PVC waste coupling of size 32mm/ 40mm suitable for wash basin, kitchen sink and urinal all as specified and directed.

S&F PTMT bottle trap having minimum water seal of 25mm for 32mm bore dia of discharge pipe (Minimum weight- 260gms) fixed in repairs complete all as specified and directed.

S&F vitreous china wash hand basin, white, flat back of size 550mm x 400mm including CI brackets and 32mm waste coupling and waste pipe etc., fixed in repairs complete all as specified and directed.

S&F in repairs PTMT overhead round shower 100mm dia with shower arm 225mm long with flange suitable for fixing with 15mm dia pipe complete all as specified and directed. Make: Prayag Cat No. 1814 (Shower) with Cat No. 184 (Shower Arm) or equivalent from other makes specified in particular specifications.

M&L vitreous china wash down water closet pedestal pattern white with including white coloured PVC seat cover including connections to drain (or outgoing pipe) and flush pipe etc. fixed in repairs complete all as specified and directed.

Supply and fix plastic water closet seat cover, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device fixed in repairs complete all as specified and directed.

S&F vitreous china wash down water closet squatting pan Orissa pattern of size 580 x 440mm with integral foot rest (white or light coloured) including making necessary connection to soil pipes and flushing cistern fixed in repairs complete all as specified and directed.

S&F in repairs inlet assembly for cistern- Duk/ Bristol/ Avon coup Clos of Parryware or other approved make complete all as specified and directed.

S&F in repairs outlet assembly for cistern- Duk/ Bristol/ Avon coup Clos of Parryware or other approved make complete all as specified and directed.

S&F 15mm PVC connection 450mm long with PTMT nuts of superior quality all as specified and directed.

S&F PVC low level flushing cistern 10 ltr with complete accessories such as PVC flush pipe, over flow pipe etc. fixed in repairs complete all as specified and directed.

S&F toilet paper holder with flap recessed type matt chromium plated as per Cat No. 1153S of Jaquar or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F in repairs soap dish, matt finished chromium plated (MCH/ Colour CP) as per Cat No. 1131N of Jaquar or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F in repairs vitreous china wash basin of size 600mm x 450mm of Make Parryware Cube model Cat No-C844E or equivalent from other makes specified in particular specifications including 19mm thick granite top with supporting wall, waste coupling, waste pipe and brackets etc. complete all as specified and directed.

S&F in repairs corner glass shelf 300mm, matt finished, chromium plated (MCH/ Colour CP) with bracket as per Cat No. ACN-1173 of Jaquar or T6010A1 of Parryware or Cat No. BEA-44 of Prayag or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F in repair PVC cabinet mirror of size 330mm x 430mm with shelf as per Cat No. 551 of Parryware or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F in repairs stainless steel 1mm thick kitchen or laboratory sink with draining board of grade 304 with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 914mm x 460mm x 203mm and bowl size 405mm x 354mm x 203mm complete all as specified and directed.

S&F in repair stainless steel plate rack of size 24" x 36" x 10" with separators and 3 tier shelves, provisioning of hooks made out of stainless steel sheet of good quality all as specified and directed. Make: Prayag Cat No. P-336 or equivalent from other makes specified in Particular Specifications.

S&F in repairs brass chromium plated wall mixer valve 3-in-1, fancy type with provision of hand shower and overhead shower both complete with 115mm long bend pipe, connecting legs and wall flange as per cat No. FLR-5281 of Jaquar or equivalent from PRAYAG/ PARRYWARE/ H&R JOHNSON complete all as specified and directed.

S&F in repair 600mm x 450mm bevelled edged looking mirror 6mm thick with aluminium frame work fitted with 6mm thick commercial ply or AC sheet backing to mirror complete all as specified and directed.

S&F in repairs PVC health faucet special with 1.0m long tube and hook complete all as specified and directed. Make: Prayag Cat No. 1871 or equivalent from other makes specified in particular specifications.

S&F in repairs 60cm long PTMT towel rail as per cat No. 200 of Prayag or equivalent from other makes specified in particular specifications fixed with and including chromium plated brass screws and plastic cleats complete all as specified and directed.

Cleaning of service UPVC service/ over head tank exc. 250 ltr but n. exc. 500 ltr capacity and cleaning as under:- (a) Emptying the tank, cleaning the internal surface of tank with wire brushes to remove all type of depositions and then thoroughly washing it. (b) Total disinfection and sterlisation of tank hygienically cleaned and bacteria free and safe by Eco-Friendly for storage of water. Note: (i) Qty of tanks are considered for cleaning twice in a year. (ii) Date of cleaning to be written over each tank after cleaning.

All as per item No. 137.00 above but capacity of tank exc. 500 litres but n. exc. 1000 litres.

All as per item No. 137.00 above but capacity of tank exc. 1000 litres but n. exc. 2000 litres.

All as per item No. 137.00 above but capacity of tank exc. 200 litres but n. exc. 5000 litres.

M&L chipping off loose concrete, broken plastering in chajjas, ceiling, fins and fascia carefully and applying one coat of rust remover of approved brand and then one coat of approved concrete bonding agent and 20mm thick rendering in cement mortar (1:4) in two coats of 10mm thick each coat complete all as specified and directed. Note: Work shall be carried out at any place and building upto 10 metre height.

Demolition of brick masonry built in cement mortar including all quoins/ arches/ pillars etc. but excluding ashlars facings, dressed stone work, precast concrete articles and disposing off the rubbish debris to distance exc. 1.50 KM and n. exc. 3.00 KM complete all as specified and directed.

Demolition of PCC in ground floor and paving n. exc. 15cm thick including removal of debries outside MD land complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets; any thickness, including cover fillets/ snap grid etc. complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise specified.

Dismantling asbestos cement/ galvalume (corrugated, semi corrugated etc.) sheets in roof covering all as specified and directed.

SIRITEL SYSTEMS PRIVATE LIMITED

M/s.Jayam Constructions