Providing and fixing Multi play station and beautification of Shaheed bhagat Singh park Ward No.01, NIT, Division-1 Faridabad

Amount

Providing and fixing of Victorian Bench covering area approx. 5’L frame to frame side frame in of heavy duty cast iron which is circular shape at front sitting corner. Seat and rest 59” long total 12 Nos. is of MS rectangular pipe 65x25mm x 16 Gauge complete with Epoxy primer (Interseal 670 HS) and PU Finish (Interthane 990) paints (Protective coating division) item with GST, Transportation, Installation with C.C and amp: labor at site. @ Rs. 15000/- Each

Multi Activity Play Station Covering Area: 34’L x 22’W It contains: FRP Spiral Slide 6mm thick inclined at 5’H – 1 no FRP Tube Slide inclined at 5’H – 1 no FRP Wave slide 6mm thick inclined at 5`H - 1 no FRP Bowl slide 6mm thick with FRP Entry Gate inclined at 3’H – 1 no FRP Stair 3mm thick inclined at 3’H- 1 no. FRP Platform Hex. Shape 5mm thick in 7’Dia – 2 no. FRP Canopy – 2 no. FRP Deer Figure on canopy – 2 no. FRP Fancy Railing Frog andamp: Monkey Shape – 4 no. FRP Walking Bridge 7.5’ Long – 1 no. M.S. Spring Climber – 1 no. M.S. Zig-Zag Climber – 1 no M.S. Chain Net Climber – 1 no M.S. Climbing Ladder – 1 no M.S. Station in which vertical M.S. pipe is of 3” x12G of I.S.I Mark – 2 no Complete with Epoxy primer (Interseal 670 HS) and PU Finish (Interthane 990) paints (Protective coating division) item with GST, Transportation, Installation with C.C and amp: labor at site.

FRP dustbin (tilting type) of capacity 60 Ltr. Body is made of moulded fiberglass re-enforced plastic (non- halogen fire retardant resign) of 2mm thick having its lid with handle. It fitted with m.s. square pipe 1.25` x 1.25` x 14 gauge and m.s. flat 50 x 5mm, 30x 5mm base structure with Epoxy Primer INTERSEAL 670 HS and PU finish (Interthane 990) paints. Complete item with GST. Transportation, Installation with CC and labor at site

Providing and installing FRP garden sitting bench with inbuilt LED lighting, made using high-quality translucent FRP panels featuring a multicolor artistic swirl design. The bench shall include a sturdy internal MS frame for support and waterproof (IP65-rated) LED strip lights installed inside for enhanced aesthetic appeal during evening and night hours. The lighting system shall be powered by a concealed low-voltage driver with proper wiring and protective conduits. Bench dimensions are approximately 1180 mm (L) x 460 mm (W) x 465 mm (H) with a seating cut-out of 255 mm x 90 mm, as per the approved drawing. The scope includes complete fabrication, transportation, on-site installation, testing, and commissioning with all necessary materials, labour, and accessories, to be completed as directed by the Engineer-in-Charge.

Providing and laying 15mm thick synthetic jogging track EPDM (9mm SBR Crumb Rubber as track bottom Cushion Layer 6mm EPDM Colour Granules top layer) of approved make COLORSPACE F/COLORPLAY/BSG/NOVAL with test reports of certified NABL lab, origin Of EPDM USA and EUROPE and equivalent. EPDM Granules shall have following minimum properties 00 Polymer content )22%, (u) Hardness of 55-65 Shore A [per ASTM D2240): (ii) Tensile Strength of )5 MPa (per ASTM D412): (iv) Elongation )500% (as per ASTM D412): (v) Density of 1.6 kg/cum (per ASTM D792). (vi) High UV rating of 3-5 on grayscale, (vi) VOC less than 3.0.0 ww/1 [viii] Combustibility less than40 mm /m: (ix) Anti-Microbial and Anti-Fungal Tested material, and shall be laid in three layers.[1] First step shall be the application of single component Polyurethane based primer coating Layer: PU binder shall have a specific gravity of 1.05 the appearance of clear pale yellow and viscosity of 350- 2900 cps and shall be from the original manufacturer from the list of approved makes 2. The second layer shall be an impact attenuating cushion layer of 9mm thick black crumb rubber/SBR adhered with a polyurethane binder and PU binder shall have a specific gravity of 1.05: the appearance of clear pale yellow and viscosity of 350- 2900 cps and shall be from the original manufacturer from the list of approved makes of to form a resilient porous layer. Crumb rubber /SBR shall be mixed with a minimum of 14% -16% of single-component PU base binder so as to ensure that PU binder provides 100% coating of the SBR/crumb rubber particles. The third step shall be laying a 6mm EPDM GRANULES top layer with at minimum 18% binder of single component polyurethane and shall provide 100% coating of the EPDM granules particles Design on the base top layer by a specialized team of installers according to the specification of approved material and shade. The detailed technical specifications of EPDM flooring material properties, application procedure, testing. etc. are attached herewith for compliance. The documentary evidence has to be produced. for the procurement of material for the manufacturer`s test certificate. An undertaking is to be furnished by the agency that surface system is tested EN 1177 For shock absorption report of SPORTS LAB approved by IAAF WORLD Athletics’ company has not been blacklisted by lAAF/Sports Authority of India/ World Athletics’IAAF means earlier `international Association of Athletics Federations or World Athletics now. The work shall be carried out by the manufacturer`s approved applicator and the prospective bidder should produce a letter from the approved manufacturer prior to submission of bid and strictly to the technical specifications and satisfaction of the engineer-in-charge.

Bidder Name

Amount

SUPER ENTERPRISES (GSTN-NA) BID ID -1315025

Yogesh Kumar Mangla (GSTN-NA) BID ID -1315414

HHP Contractors (GSTN-NA) BID ID -1315437

Yogesh Kumar Mangla (BID ID -1315414)

HHP Contractors (BID ID -1315437)

Yogesh Kumar Mangla (BID ID -1315414)

HHP Contractors (BID ID -1315437)