Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance | Admitted-Finance |
| 5 | Admitted-Finance | Admitted-Finance |
Tender Value
₹55.2 L
EMD Value
₹1.1 L
Closing Date
24 Aug 2020, 4:00 pmClosed
Er. Balbir Singh
XEN PWD Const Div. No.III jammu
BOQ
2020_PWDJK_102237_1
e-NIT No.36 of 2020-21 Dated 14-08-2020
Open Tender
Civil Works
Item Rate
60 days
Gole Gujral
NIT
3 documents required · 3 mandatory
₹1,000
XEN PWD Const Div. No.III
₹1.1 L
Yes
28 Aug 2020
15 Aug 2020
25 Aug 2020
15 Aug 2020
24 Aug 2020
15 Aug 2020
Amount
Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil including all leads lifts and carriage complete Job
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) including all leads lifts and carriage complete Job
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including all leads lifts and carriage complete Job
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all leads lifts and carriage complete Job
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Mild steel and medium tensile steel bars
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) including all leads lifts and carriage complete Job
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) including all leads lifts and carriage complete Job
Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete including all leads lifts and carriage complete Job
Centering and shuttering including strutting, propping etc. and removal of form work for:
Foundations, footings, bases for columns
Columns, pillars, piers, abutments, posts and struts
12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 coarse sand) including all leads lifts and carriage complete Job
15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 coarse sand) including all leads lifts and carriage complete Job
Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete Welded
Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers' specifications:- Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface
Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
M/S GUCHHU RAM
CHAMEL SINGH
M/S JATINDER SINGH
aditya puri
chamanlal
M/s Narinder Singh
Ashwani Kumar
SUNIL KUMAR
M/S JAI PAUL
Raghubir Singh
Sushil Kumar
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .