Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.5 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹31.9 L+₹3.0 L (10.3%)Rejected-AOC NO 5 3 JJ KHAN ROAD 1ST LANE ROYAPETTAH CHENNAI 600 014 | CHENNAI | TAMIL NADU | 600014 | L2 | Rejected-AOC Not Lowest Bidder |
Tender Value
₹34 L
EMD Value
₹68,000
Closing Date
31 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer, St.Thomas Mount
Garrison Engineer, St.Thomas Mount, Old MH Complex, Rudra Road, Chennai-600 016
WELCOME MAINTENANCE TO BLDGS AT INSIDE AND OUTSIDE OTA INCLUDING MISC REPAIRS FOR CADETS ACCN AND POST CONSTR ATT AT PO COLONY, USMAN LINE (B/R SERVICES) AND WELCOME MAINT TO BLDGS AT VARIOUS LOCATIONS (E/M SERVICES) UNDER GE STM
2022_MES_542725_1
8300-WELCOME MAINTENANCE TO BLDGS AT INSIDE AND OU
Open Tender
Civil Works
Item Rate
270 days
GE STM
As per tender documents
6 documents required · 6 mandatory
₹500
GE STM
₹68,000
Yes
19 Sept 2022
2 Aug 2022
8 Sept 2022
2 Aug 2022
31 Aug 2022
17 Aug 2022
2 Aug 2022 - 11 Aug 2022
Amount
M&L for preparing plastered or unplastered old decorated surfaces of wall by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified.
All as per item No.1 above but on ceiling surfaces.
All as per item No.1 above but one coat of colour wash.
M&L for preparing plastered or unplastered old surfaces of wall by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including crack filling and undulation filling with wall putty to achieve smooth finish and applying one coat of distempering with oil bound distemper white or tinted complete all as specified.
M&L for preparing plastered or unplastered old decorated ceiling surfaces and applying one coat of distempering with oil bound distemper white or tinted complete all as specified.
Complete removal of existing treatment on walls and applying two coats of oil bound distemper over a coat of primer with 3mm thick wall putty to achieve smooth finish all as specified and as directed.
M&L for preparing of plastered or unplastered old surfaces of wall and applying one coat of exterior weather proof paint white or tinted upto triple storey building including scaffolding arrangement complete all as specified and directed
Complete removal of existing treatment and preparation of plastered or unplastered surfaces of walls, soffits of chajja, cornices etc and applying two coats of exterior weather roof paint over a coat primer white or tinted upto triple storey building including scaffolding arrangement complete all as specified and directed.
M&L for preparing of old painted wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified.
M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified.
Taking down cement plaster of any description incl raking out joints, hacking for key, scrubbing down with water etc.
M&L for rendering 10mm thick in CM 1:6 on fair faces of brick or concrete surfaces finished even & smooth with out using extra cement on internal surfaces of wall.
M&L for 15mm thick rendering in two layers of 10mm thick and 5mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even & smooth w using extra cement, mixed with liquid water proofing admixture including scaffolding arrangement complete (as per manufactures instructions) all as specified. Note : Liquid water proofing admixture shall be measured and paid separately.
M&L for rendering 5mm thick in CM 1:3 on fair faces of concrete surfaces as in ceiling and finished even and smooth with out using extra cement complete all as specified and as directed.
Supply only liquid waterproofing admixture.
M&L for Preparing of new plastered surfaces of ceiling and applying three coats white wash all as specified and directed.
M&L for Preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of primer with 3mm thick wall putty on internal surfaces of walls.
M&L for Preparation of new plastered surfaces and applying two coats of exterior weather proof paint over a coat primer white or tinted upto triple storey building including scaffolding arrangement on external surfaces of wall complete all as specified and directed.
M&L for Preparation of new plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant priming paint upto triple storey building including scaffolding arrangement on external surfaces of walls.
Taking down chowkats or frames with shutters (without taking off shutters from frames) n.exc 1.5 Sqm including making good disturbed surfaces.
Taking down chowkats or frames with shutters (without taking off shutters from frames) exc 1.5 Sqm but n. exc 4 Sqm each including making good disturbed surfaces.
Taking down shutters of any description n exc 1 sq. m each and removing to store.
Taking down shutters of any description exc 1 sq.m and n exc 2 sq.m each and removing to store.
Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required for exc half brick but n.exc one brick thick walls.
M&L for Second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints supplied and fixed.
M&L for Second class hardwood 35 mm thick plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats.
M&L for Second class hardwood 35mm thick glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze etc., with sash bars, divided into squares edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and supplied and fitted to chowkats.
M&L for Second class hardwood 30mm thick glazed and skeleton window/vent shutters, open rebated and prepared to receive glass, gauze etc., with sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (b) and supplied and fitted to chowkats all as specified.
S&F 100mm size of mild steel butt hinges, medium weight, cold rolled .
S&F 75mm size of mild steel butt hinges, medium weight, cold rolled .
S&F Aluminium anodised barrel tower bolts of extruded section 200 mm size.
S&F Aluminium anodised barrel tower bolts of extruded section 125 mm size.
S&F Extruded aluminium alloy handles, fabricated type, anodised 150 mm long.
S&F Extruded aluminium alloy handles, fabricated type, anodised 125 mm long.
S&F Aluminium alloy, anodised, 300mm sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy and fixed
M&L for preparing surfaces of new wood or wood based surfaces any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.
S&F framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde-E-165.
M&L for preparing surfaces of wood and wood based materials of any description and treated with tar or coal tar black paint treating ends of posts backs of chowkats etc area tarred exc 0.1 sqm but n exc 0.5 sqm each.
M&L for preparing surfaces of wood and wood based materials of any description and treated with tar or coal tar black paint treating small articles such as stop covers gully gratings holdfasts ends of posts backs of chowkats etc area n exc 0.1 sqm each.
Hacking out old broken glass (any thickness, size, quality or description) from any type of frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.
S&F Sheet glass, ordinary quality, 4mm thickness and glazing with oil putty or wooden beading in square n. exc. 0.5 Sqm each .
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.
S&F in repairs Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple on any type of door/windows.
S&F in repairs 15mm bore steel tubes medium grade galvanised with all fittings / fixtures concealed to walls and ceilings or laid in floors.
S&F in repairs 20mm bore steel tubes medium grade galvanised with all fittings / fixtures concealed to walls and ceilings or laid in floors.
S&F in repairs 25mm bore steel tubes medium grade galvanised with all fittings / fixtures concealed to walls and ceilings or laid in floors.
S&F in repairs vitreous China wash hand basin, white, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets, cutting for and pinning in ends of brackets or erecting of fixing of supply and waste pipe all as specified.
S&F in repairs vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) with plastic water closet seat, white, closed pattern with flat bottom, and cover and MS/ CP/ aluminium hinging device all as directed.
S&F in repairs PVC valveless, symphonic action type flushing cistern low level, 10 litre capacity with it’s complete accessories, fixed complete incl connection to water pipe and PVC 32 mm dia flush pipe etc.
S&F in repairs brass CP shower rose with or without swivel joints 125 mm size.
Supply and fix Angle valves, cast copper alloy, screwed down, high pressure and fly nuts, screwed for iron pipe 15 mm bore and fixed in repairs all as specified.
S&F in repairs Stop cock (concealed type) cast copper alloy , Chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, 15 mm bore.
S&F in repairs 15mm Bib taps, chromium plated fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.
S&F in repairs pillar taps 15mm bore cast copper alloy with capstan heads chromium plated, fancy type, screwed down high pressure with or without lettered hot' or 'cold' with long screwed shanks and fly nuts screwed for iron pipe .
S&F PVC connection 15mm dia with PTMT nuts of length 450mm.
S&F chromium plated cascade health faucet with minimum 1200mm long pipe of fancy type CP connection and hook fixed in repairs all as directed. Make :Parry ware Cat No .T9937A1 or equivalent.
S&F in repairs Plastic water closet seat, white, closed pattern with flat bottom, and cover and MS/ CP/ aluminium hinging device.
S&F Corner glass Shelves (with brackets) for bath room fixed in repairs Make : Jaguar (Cat No-CAN-1173 or equivalent) .
S&F Bath room PVC cabinet mirror of size 350mm x 450mm fixed in repairs. (Make : Prayag Cat part No 551 or equivalent)
S&F in repairs sinks with drainage board made of stainless steel l mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified and as directed.
S&F for 0.8mm thick stainless steel plate rack size 0.90 x 0.60 m fixed in repairs with steel screws complete.
M&L for 18/19 mm Pre laminated particle boards, interior grade, Pre laminated decorative choice one side & other side balancing white lamination fixed in repairs with screws to timber work for Cup Boards complete.
M&L for 6mm thick external teak wood lipping fixed to18/19mm thick particle boards with nails.
S&F continuous (piano) hinge mild steel, bright finish or electro galvanised width of flaps 40mm (when open) all as directed.
S&F 75mm size extruded aluminium alloy handles, fabricated type, anodised.
S&F Aluminium anodised Hasp and staple, safety type of size 75mm.
S&F in repairs 25mm dia aluminium coloured powder coated decorative fancy type curtain rods all as specified and as directed.
S&F aluminium coloured powder coated decorative fancy type end bracket and knob for 25mm curtain rods all as specified and as directed.
S&F in repairs cast iron door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed .
S&F in repairs 125mm Double action spring hinges for door shutters, mild steel with steel wire spring, stove enamelled, black all as specified.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
M&L for glazed ceramic coloured joint free tiles in vertical surfaces 350 x 250 x 7mm/450x350x7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement, incl cement screed 10 mm thick in CM 1:3 all as specified and directed.
M&L for non skid ceramic coloured joint free tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces over 15mm thick screed bed in CM 1:4 complete all as directed.
M&L for non skid ceramic coloured joint free tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces over 15mm thick screed bed in CM 1:4 complete all as directed.
Taking down aluminium door/window shutter from its position and repairing pintol hinges and glazing clips, rubber neoprene packing, refixing to its own position.
S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors/wall all as directed.
S&F PVC (SWR) bend 110mm bore complete all as specified and as directed.
S&F PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/wall.
S&F PVC (SWR) bends 75mm bore complete all as specified and as directed.
S&F PVC (SWR) floor trap plain 75mm dia outlet with grating including jointing with solvent cement complete all as specified and as directed.
S&F PVC (SWR) vent cowl 110 mm.
Demolition of unreinforced Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and disposed off from site all as directed.
M&L for 75mm thick cement concrete 1:3:6, type C-2 using 40mm graded stone aggregate as in plinth protection & paving, finished even & smooth without using extra cement.
Dismantling water tanks of 1000 ltr capacity and removing to store
S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 ltrs capacity of white colour hoisted and fixed in position all as specified in SSR Part I
S&F in repairs 25mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms)
S&F in repairs 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms)
S&F in repairs 25 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe
S&F in repairs 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe
Providing and injecting chemical emulsion for post construction anti termite treatment along with external wall below concrete or masonry apron/ plinth protection, using chemical emulsion (Chlorpyriphos 20% EC at 1% concentration) @ 2.25 ltrs per linear meter including drilling holes of 12mm dia at 300mm apart, and 300mm deep and plugging with CM 1:2 to match concrete surfaces and making good all as specified and as directed.
Providing and injecting chemical emulsion Chlorpyriphos 20 EC at 1% concentration) for post construction anti termite treatment along the wall internally @ 1.00 ltr per hole at 300mm apart including drilling holes of 12mm dia, 300 mm deep and plugging with CM 1:2 mixed with colour pigment to match the existing surfaces and making good all as specified and directed.
Providing and injecting chemical emulsion Chlorpyriphos 20% EC for post construction anti termite treatment at points of contacts of wood works ie, door/wooden windows/wooden cupboards with masonry using chemical emulsion @ 0.5 ltrs per hole by drilling holes of 6mm dia at downward Angle of 45 degree at 150 c/c, and plugging with CM 1:2 mixed with colour pigment to match existing surfaces and making good all as specified and as directed.
Taking down carefully copper/ Aluminium point wiring (light, fan, socket or power) complete (fitting such as switches, ceiling roses, pendants, regulators, sockets, etc can be measured separately) removing the material from wall/ceiling etc, making good the disturbed surfaces and taken as credit.
M&L for Wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable FRLS 1100 volts grade, multistranded with copper conductors conforming to IS specifications, with colour code drawn through and including non metallic casing caping, and accessories fixed on wall / ceiling etc with suitable clamps, screws, etc in wall including making good the disturbed surfaces, matching with the existing wall surfaces including Provn of 1.5 sqmm PVC insulated FRLS unsheathed cable with multistranded copper conductor as earth continuity conductor and connecting to common earth dolly all as specified and as directed :-
(a) One light point controlled by one switch.
(b) One fan point controlled by one switch and one regulator.
(c) One 3 pin 5 Amps switch socket on independent board.
(d) One 3 pine 5 amps switch socket on same board along with other switches.
(e) One bell point controlled by bell push switch on independent board.
M&L for Wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable FRLS 1100 volts grade, multistranded with copper conductors conforming to IS specifications, with colour code drawn through and including non metallic rigid PVC conduit, PVC conduit fittings and conduit accessories concealed on wall and fixed on ceiling etc with suitable clamps, screws, etc or concealed in wall including cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 for concealed conduit wiring and making good the disturbed surfaces, matching with the existing wall surfaces, cutting not exceeding 10 Cm girth ,including Provn of 1.5 sqmm PVC insulated FRLS unsheathed cable with multistranded copper conductor as earth continuity conductor and connecting to common earth dolly all as specified and as directed :-
(a) One light point controlled by one switch
(b) One fan point controlled by one switch and one regulator
(c) One 3 pin 5 Amps switch socket on independent board
(d) One 3 pine 5 amps switch socket on same board along with other switches.
(e) One bell point controlled by bell push switch on independent board.
All as per item No 96 herein before but with 4.0 Sqmm single core PVC cable for one 3 pin 15 amps switch socket outlet on independent board.
M&L for sub main wiring with PVC insulated, FRLS 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications, 2 runs of 6 sqmm including one run of 6 sqmm single core multistranded copper conductor PVC insulated cables as earth continuity conductor with colour code drawn through and including one run of 25 mm dia rigid PVC conduit and conduit accessories or casing capping incl accessories fixed on wall/ceiling etc., or concealed in wall and connecting to common earth dolly including taking down old unsv all as specified and directed.
All as per item No.98 herein above but with 2 runs of 2.5 Sqmm and one run of 2.5 sqmm earth wire in PVC conduit as specified and as directed.
All as per item No.98 herein above but with 2 runs of 4 Sqmm and one run of 4 sqmm earth wire in PVC conduit as specified and as directed.
All as per item No.98 herein above but with 2 runs of 10 Sqmm and one run of 10 sqmm earth wire in PVC conduit as specified and as directed.
All as per item No.98 herein above but with 4 runs of 10 sqmm and one run of 10 sq.mm earth wire in PVC conduit as specified and as directed. Note for item Nos 98 to 102 :- (a) The wiring shall be done in proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads. (b) For concealed wiring the quoted rate shall be inclusive wherever required cutting chases etc. (c) 2/4runs of cable 2.5/4/6/10 Sqmm earth wire and PVC conduit shall be measured as one unit.
Taking down carefully by unscrewing from boards/outlet boxes, wall ceiling fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, with plug, switch fuse and regulators etc., taken as credit and making good the disturbed surfaces of wall etc all as directed.
S & F Ceiling rose surface Ceiling rose, 3 phase / PVC / polycarbonate, isolated body.
Supply and Fix Switch piano flush type 5 amps single pole, one way, 240 Volts all as directed.
Supply and Fix Switch socket combination 2 in 1, 3 pin, 5 amp, flush type all as directed.
Supply and Fix Socket outlet 3 pin 5 Amps flush type all as directed.
Supply and Fix Bell push flush type 5 amps single pole 240 Volts all as directed.
Supply and Fix Buzzer, AC, 230 volts, single pole all as directed.
Supply and Fix Bell ding dong, AC, 230 volts, single pole all as directed.
Supply and Fix Socket outlet 3 pin 15 amps flush type all as directed.
Supply and Fix Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp multipurpose controlled by one switch all as directed.
Supply and Fix Modular Socket, 6A - 2/3 pin combined 2module
Supply and Fix Modular Socket 6A/16A - 2/3 pin combined 2 module,
S & F stepped type electronic fan regulator flush type all as directed.
S & F Lamp holder PVC/polycarbonate with back plate for pendant/batten fittings all as directed.
S & F modular Fan step regulator, 120W - 1 module for ceiling Fan of 1200 mm sweep all as specified and as directed.
Supply and Fix modular switch 1 way 6A, 1 module
Supply and Fix modular switch 1 way 16A, 1 module
Supply and Fix modular Bell push 6A 1 module
Supply & Fix Bell Multimusical type all as specified and as directed.
S&F Modular white cover with plate with frame 2 module incl matching with white cement wk if necessary
S&F Modular white cover with plate with frame 3 module incl matching with white cement wk if necessary
S&F Modular white cover with plate with frame 4 module incl matching with white cement wk if necessary
S&F Modular white cover with plate with frame 6 module incl matching with white cement wk if necessary
S&F Modular white cover with plate with frame 8 module incl matching with white cement wk if necessary
Supply and Modular flush box 1/2 module
Supply and Modular flush box 3 module
Supply and Modular flush box 4 module
Supply and Modular flush box 6 module
Supply and replacement of metal clad socket single pole and neutral enclosure with a two pin and earth plug top and socket complete with one single pole MCB 230 Volts 20 Amps all as specified and as directed.
Taking down carefully existing un-serviceable main switch, DB's including boards etc, from its original position complete all as directed.
Supply and fix MCCB Distribution board, TP&N , vertical , double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link,415 Volts 4 way fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete including 3 Pole V-Tec MCCB of 100 A rating & 16kA breaking capacity, MCCB pre-fitted at factory all as specified and directed.
Supply and fix MCCB Distribution board, TP&N , vertical , double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link,415 Volts 8 way fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete including 3 Pole V-Tec MCCB of 100 A rating & 16kA breaking capacity, MCCB pre-fitted at factory all as specified and directed.
Supply and fix MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 4 ways SPN Double door, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed.
Supply and fix MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 8 ways SPN Double door, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed.
Supply and fix MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 12 ways SPN Double door, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed.
Supply and fix MCB DP, 240 Volts, 63 Amps, 10 kA rupturing capacity 'B' series complete all as specified and directed including taking down old one.
Supply and fix MCB SP, 240 Volt,10-40 Amps, 10 kA rupturing capacity 'B' series complete all as specified and directed including taking down old one.
S & F RCBO single pole & neutral, 240 volts, 40 amps, 30mA, 10kA all as directed.
Supply and fix in repair of retrofit lamp 11 watt E-27/B22 type suitable for 230 Volts 50 Hz AC supply complete including taking out old/unserviceable complete as directed
Supply and fix Wall mounted LED Batten with tube extruded Aluminium heat shrink provided for efficient heat dissipation & integrated electronic driver of Lamp type: 20W LED life time of 30000* hours including lamp all as specified and as directed. Make: Havells cat part No. LUMILINEPLUSBS20WLED865SPCSS/ CROMPTON cat part No.TRIMLINE LDL-20-WW/ HALONIX cat part No- LED AL BATTEN HLB-03-20-CW-AL-HL1.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. Make:- havells cat No.ENDURA LINEAR NEO BS10WLED 865SPC WH / BAJAJ Cat No. BCLAB SP 10WH/ CRMPTON Cat No. LDLL 10- CDL.
Supply, Installation, testing and commissioning of Surface mounted LED luminaries with Mid flux LED using efficient optics , System lumen efficacy > 80Lumen/Watt , System Luminous flux of >=3200 lumens, System Wattage <=42W with 50,000 hours burning life. Colour rendering index > 70 and Colour temperature 5000K/6500K. CRCA housing with high efficiency opal diffuser. Luminaries sealed from bottom. Inbuilt gear . Zero maintenance, Zero mercury. Driver Surge protection > 1.5kV. Electronic In-Built PF > 0.9 , THD < 10% , IEC Compliant for Safety , Performance & EMI. The size shall be of 2'x2'.
Dismantling existing UNSV hylam sheet of any size from boards removing switches etc. Supply and fix hylam sheet 3mm thick including necessary cutting of suitable opening for switches, sockets, regulators, etc refixing of switches, sockets, regulators, etc replacing screws and connecting up and testing.
Supply and fixing round shape 10/12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete three core flexible copper conductor cable of suitable size complete. Make:- Havells cat No. INTEGRA NEO SURFACED LS10WLED 840S/ CROMPTON cat No. LCDSPLN-R-12-CDL/ BAJAJ Cat No. BGSLO SLEEK SURFACE 12WWH RD.
S&F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. Make:- Havells cat No.HEXAFT10WLED 857SSYMBOPC/ PHILIPS Cat No. WT202W LED10S CW PSU S3 PC /BAJAJ Cat No. BIBWP 10W LED.
M & L for Earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick buried directly in ground vertically to a depth of not less than 2.25 mtr below normal ground level with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised iron/steel earth wire 4 mm dia by means of bolts, nuts, washers and check nuts made out of galvanised iron, protected by GI pipe light grade 15 mm bore dia and connected to main control board all as shown in Electrical plate No 3 of MES SSR Part I including necessary excavation and earth work in any type of soil, salt, charcoal dust, PCC 1:2:4 type B1 in chamber, RCC 1:2:4 chamber cover with 6 mm dia MS bar at 100 mm centre to centre both ways and MS 6 mm dia hook complete all as specified and directed.
Supply & Fixing of LED driver for LED fittings upto 40Watts of Any size/type .
G.JANAKIRAMAN CO
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .