Loading
Loading…
Loading…
Tender Value
₹1.1 Cr
EMD Value
₹2.1 L
Closing Date
30 Dec 2025, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
ELECT G
13 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of "V/N" or "V" whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. Similar Nature of Work are as follows for this work:- 1) Electrification of service buildings, 2) Electrification of staff quarters, 3) Electrification of offices, 4) Electrification of Road and colony lighting, 5) Electrification of Circulating area lighting, 6) Erection & commissioning of LT & HT upto 33kV overhead mains, 7) Sub-station installations & commissioning, 8) Electrification of washing-pits, sheds, workshops etc., 9) Any above work or combination of (i) to (viii) above.
15 conditions · 4 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested by which they/he is qualifying the Qualifying criteria mentioned in the tender document. It will not be obligatory on the part of tender committee to scrutinize beyond the submitted document of tenderer as far as his qualification for the tender is concerned. The railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when so required by the railway, make available all such information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification, by the railway shall not relieve the bidder of its obligations or liabilities hereunder nor will it affect any rights of the railway there under.
No post tender correspondence shall be entertained after closing of tender even Suo moto post tender letters of the tenderers shall be treated as null/void.
The tenderers are required to observe the website to find out if any correction slips issued subsequent to uploading of the Tender . Railway reserves the right to make any additions/alterations to the tender uploaded and issue corrigendum to the same effect. In case the tenderer fails to take note of the above corrigendum, the additions and alterations entered/effected in the corrigendum shall be binding upon the tenderer and no claim what so ever will be entertained by Railway.
The tenderer should upload the documents carefully. The documents uploaded by tenderer should be clearly visible and in legible format.
Indian Railways Standard General Conditions of contract 2022 along with correction slips corrected up to date of closing of tender and the attached documents are part of the tender document.
The offers which are incomplete, without supporting documents, unsigned, conditional, will be summarily rejected.
As per letter No. 2022/CE-I/CT/GCC/Correspondence/ New Delhi, dated 14.05.2024 "On IREPS Module , a facility has already been created for online submission of Annexure-V. Therefore, the provision of downloading of Annexure-V of GCC & uploading of physically signed Annexure-V by tenderer had been discontinued on IREPS"
REPLACEMENT OF TOWER LIGHT BY HIGH MAST and Provision of Highmast at REWA sidings including Electrification of COP at Kaima
JBP-L-T-No-35-2025~WCR
JBP-L-T-No-35-2025
Open
Works - General
12 Months
Jabalpur, Madhya Pradesh
₹0
₹2.1 L
30 Dec 2025
8 Dec 2025
16 Dec 2025
93 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,10,29,037.19 | ||
| for | Item Breakup | details. | — | ||
| Supply Erection testing and commisioning of LT outdoor panel (water proof) made/fabricated out of 1.6 mm MS sheet duly painted with powdercoated , IP-65, IK-09 having suitable copper bus bars with sleeves , indicating lamps, multifunctionmeter , Gland ,Lugs, Foundation , earthing , Door Lock arrangment, pad lock, suitable MS channel ,SWG wire, suitable size Cover Shed with MS angle, grauting , paint etc. Incoming 100 A, 4 pole 25kA MCCB (2 nos, 1 as spare) and outgoing 5 x 40A 4 poleMCCB 25kA + 5 x 63A 4 pole MCCB 25kA. All the MCCBs shall be of legrand , ABB, L&T, Schnider,Hager,Simens make or equivalent.Design of panel will beapproved by comptent authority before supply, | — | — | — | 90,453.87 | |
| for | Item Breakup | details. | — | ||
| Supply, erection, Testing & Commisioning of 16 mtrs high mast alongwith 1 X 8 nos LED fittings make -Crompton, Philips , Bajaj or equivelant , Excavation of Earthing foundation earthing etc. | — | — | — | 47,52,278.76 | |
| for | Item Breakup | details. | — | ||
| "Protection of high mast: Collection of Rail pole from PWI transportation upto 10 km cutting in piece of 4 mtr approxandfixing of four such piece arround high mast at the time of casting of foundation of high mast with fencing of tiebar &Blackpaint of exposed rail piece and tie bar fencing " | — | — | — | 1,15,458.96 | |
| for | Item Breakup | details. | — | ||
| Cable laying DOUBLE in earth: This involves Excavation of 1000mm deep trench in soil/hard murrum/tar road/below Railway track. After this the cable shall be laid and then both sides are to be covered with bricks. The rest of the trench to be refilled by sheaved earth. The cable shall be supplied free of cost by Rly's which shall have to be transported by the contractor from Rly. depot,JBP to the site | — | — | — | 3,78,948 | |
| for | Item Breakup | details. | — | ||
| "Cable laying single in earth. The cable shall be supplied by Railways free of cost from depot at JBP which shall have to be transported from depot to site by contractor at his cost and then its laying.crossing rly. track/platform/road / soil/ hard murrum after diggingof trench and back filling with excavated earth after laying of pipe and making good the damages as required " | — | — | — | 1,31,040 | |
| for | Item Breakup | details. | — | ||
| Drilling of horizontal bore below track / road/ soil/ concrete by pushing method for laying of HDPE pipeup to 450 mm dia( HDPE Pipe will be supply by contractor ) | — | — | — | 7,43,784 | |
| for | Item Breakup | details. | — | ||
| Excavation of Cable trench in Cement Concrete/RCC/ Track/Tiles and laying of cable, The cable shall besupplied free of cost by Rly's which shall have to be transported by the contractor from Rly. depot,JBPto the site (size 300 mm width x1000mm depth and making of original arrangements after laying ofcable.) | — | — | — | 3,97,232 | |
| for | Item Breakup | details. | — | ||
| Cable laying on wall /pole and other similar places fixing using MS flat [25x6mm.]clamps, nuts, bolts,screws or nails as per site requirement | — | — | — | 46,095 | |
| for | Item Breakup | details. | — | ||
| Provision & laying of HDPE pipe 4" dia in tack/ road / soil/ hard murrum crossing including jointing etc. with required accessories etc.after diggingof trench and back filling with excavated earth after laying of pipe and making good the damages as required. | — | — | — | 12,79,444 | |
| for | Item Breakup | details. | — | ||
| Supply & laying of HDPE pipe 2"dia for crossing rly. track/platform/road / soil/ hard murrum after diggingof trench and back filling with excavated earth after laying of pipe and making good the damages as required. | — | — | — | 4,32,162 | |
| for | Item Breakup | details. | — | ||
| Supply of RCC pipe with Collar and laying after excavation of 1000mm deep trench in railway track/ concrete/ earth etc | — | — | — | 3,45,030 | |
| for | Item Breakup | details. | — | ||
| Supply and fixing of 50 mm dia GI pipe B class as per IS-1239 | — | — | — | 14,281 | |
| for | Item Breakup | details. | — | ||
| Pipe earthing-Supply of material for earthing pit as per IS 3043, erection include excavation ofearth , filling of salt, charcoal, B class GI pipe with funnel at top with cast iron cover havinghandle and cement concrete chamber etc as per latest IS with inscription ligbility of IR value ontop of earth pit chamber with serial no etc. Then testing with earth tester | — | — | — | 1,11,938.8 | |
| for | Item Breakup | details. | — | ||
| Supply and laying of 8/10/12 SWG GI wire a sper requireement of site | — | — | — | 4,731.2 | |
| for | Item Breakup | details. | — | ||
| Supply & fixing of cable route marker. | — | — | — | 18,660.6 | |
| for | Item Breakup | details. | — | ||
| Supply and erection of outdoor control box of IP54 degree of protection,Switch On-Off street lights on time scheduling basis by incorporating an analog/digital time switch and contactor, 32A 230 V 3P Timelite Distribution Boards-Analog Time Switch,IS/IEC 13947-27 | — | — | — | 2,74,139.7 | |
| for | Item Breakup | details. | — | ||
| Supply & erection OF 5MTRS OCTAGONAL POLE along with base plate, excavation of earth , nut bolts etc and foundation along with arm for holding fitting Sample will be approved by compotent authorty before supply | — | — | — | 3,98,274.98 | |
| for | Item Breakup | details. | — | ||
| Supply, installation, testing & commissioning of LED street light luminarie suitable for 70-72 Watt.makeHavells/Bajaj/CG/SyskaLED/Philips/Wipro or equivalent | — | — | — | 51,480.15 | |
| for | Item Breakup | details. | — | ||
| Removing, Shafting,relaying of existing cable in trench, wall, soil, roof, track crossing, road crossing,cable tray, etc including MS clamp, nut, bolt, Screw, Nails,gland, lugs.Disconnection, proper reconnection,from panel or any other thing. | — | — | — | 2,55,906 | |
| for | Item Breakup | details. | — | ||
| SDB for light and fan. TPN DB 4 way (8+12) IP-43 with metal door, 4 with ELCB, RCCB 32A TPN incomer and outgoing having 5 x 10A SPMCB and 5 x 6A SP MCB with pherrol MCB make - Legrand, Havells, Hager, simens or equivalent , | — | — | — | 24,013.12 | |
| for | Item Breakup | details. | — | ||
| "SDB for Power. TPN DB 4 way (8+12) IP-43 with metal door, with ELCB, RCCB 63A TPN incomer and outgoing having 5 x 32A SPMCB and 5 x 20/16A SP MCB. MCB make - Legrand, Havells, Hager, simens or equivalent " | — | — | — | 26,535.92 | |
| for | Item Breakup | details. | — | ||
| "Supply and Erection of Ceiling fan including electronic modular fan regulator, suitable down rod , Metal fan hook, flexible Pipe, with all necesaary arangment (BLDC, 5 star rated, 1200 mm Make- Atomberg, Usha , Bajaj,Havells or simillar make) Sample will be approved by comptent authority befor supply " | — | — | — | 61,522.05 | |
| for | Item Breakup | details. | — | ||
| Supply and Erection of E/Fan 380mm sweep Erection includes and fixing is to be done on already provided finished opening in the wall using required fasteners , their grouting and then connection is to be given from ceiling rose to this fan using cable of 1.5 sq. mm . size. | — | — | — | 16,471.26 | |
| for | Item Breakup | details. | — | ||
| Supply and Erection of 1 x 18/20W LED fittings 4 feet length. The fittings shall have to be erected by the contractor with all fixing accessories/MS clamps, nuts bolts etc. as per requirement at site. " | — | — | — | 29,252 | |
| for | Item Breakup | details. | — | ||
| Point Wiring : This includes provision of wiring with 1.5 sqmm copper starnded PVC insulated wire [ L & N and earth ]from MDB/SDB/ Board to light & fan control board and provision of control switch on common light and fan control board , together with wiring from control board to ceiling rose and provision of ceiling rose , holder on board ; with earth continuity wire; independent for each fitting. Cost of this item is inclusive of distributed cost of common board & wiring from MDB/SDB/Board to common board in addition to items specifically mentioned Make- Legrand. Havells, L&T, ABB or equivailent | — | — | — | 56,491.5 | |
| for | Item Breakup | details. | — | ||
| Supply, erection, testing and commissioning of Sub Main with 2 x2.5 sqmm FRLS copper wire inside PVC Casing caping with running earth etc complete. (1 m length of submain consists one cktmtr including all accessories & 2 wire of 2.5 sqmm with one wire of 1.5 sqmm for earth conn). | — | — | — | 73,455 | |
| for | Item Breakup | details. | — | ||
| Supply, erection, testing and commissioning of Sub Main with 2 x4 sqmm FRLS copper wire inside PVC Casing caping with running earth etc complete. (1 m length of submain consists one cktmtr including all accessories & 2 wire of4 sqmm with one wire of 2.5 sqmm for earth conn). | — | — | — | 88,425 | |
| for | Item Breakup | details. | — | ||
| Supply, erection, testing and commissioning of Sub Main with 2 x 6 sqmm FRLS copper wire inside PVC Casing caping with running earth etc complete. (1 m length of submain consists one cktmtr including all accessories & 2 wire of 6 sqmm with one wire of 2.5 sqmm for earth conn). | — | — | — | 88,900.5 | |
| for | Item Breakup | details. | — | ||
| "16A & 6/3 pin Switch socket point on separate circuit and board. Make Havells, Wipro, legrand, Bajaj or equivalent." | — | — | — | 3,741.92 | |
| for | Item Breakup | details. | — | ||
| 5 /3 pin 5A Switch socket on separate boards: wires shall run separate from SDB Havells, Wipro, legrand, Bajaj or equivalent. | — | — | — | 4,765.4 | |
| for | Item Breakup | details. | — | ||
| 6A 5 pinSwitch socket point on fan and light control board Havells, Wipro, legrand , Bajaj or equivalent. | — | — | — | 1,449.4 | |
| for | Item Breakup | details. | — | ||
| Concealed Wirings:32A MCB and socket for air conditioner / Gyser/ Water cooler: (modular) Havells, Wipro, Orient, Bajaj, crompton or equivalent | — | — | — | 5,856.65 | |
| for | Item Breakup | details. | — | ||
| Concealed metal box boards Supply, fixing of concealed metal box boards + modular sheet plate suitable for modular switches/sockets/regulator/AC point/Geyser etc. front open type (for concealed wiring). This includes masonry work happened at the time of execution of the work and its associated repairs. All material required for this job will be supplied by contractor. Four module box of Havells, Wipro, Orient, Bajaj or equivalent | — | — | — | 2,350.6 | |
| for | Item Breakup | details. | — | ||
| Concealed metal box boards Supply, fixing of concealed metal box boards + modular sheet plate suitable for modular switches/sockets/regulator/AC point/Geyser etc. front open type (for concealed wiring). This includes masonry work happened at the time of execution of the work and its associated repairs. All material required for this job will be supplied by contractor. Six module box of Havells, Wipro, Orient, Bajaj or equivalent. | — | — | — | 1,882.5 | |
| for | Item Breakup | details. | — | ||
| Concealed metal box boards Supply, fixing of concealed metal box boards + modular sheet plate suitable for modular switches/sockets/regulator/AC point/Geyser etc. front open type (for concealed wiring). This includes masonry work happened at the time of execution of the work and its associated repairs. All material required for this job will be supplied by contractor. Eight module box of Havells, Wipro, Orient, Bajaj or equivalent. | — | — | — | 2,883.5 | |
| for | Item Breakup | details. | — | ||
| Concealed metal box boards Supply, fixing of concealed metal box boards + modular sheet plate suitable for modular switches/sockets/regulator/AC point/Geyser etc. front open type (for concealed wiring). This includes masonry work happened at the time of execution of the work and its associated repairs. All material required for this job will be supplied by contractor. Twelve/Eighteen module box of Havells, Wipro, Orient, Bajaj or equivalent. | — | — | — | 4,334.76 | |
| for | Item Breakup | details. | — | ||
| PVC conduit 25 mm dia as per IS-9537 (HMS) | — | — | — | 48,625 | |
| for | Item Breakup | details. | — | ||
| Cutting of wall for insertion of 1" dia PVC conduit, fixing hardwares for fixing the conduit along with its supply and then replaster it with cement and sand mixture and then painting with matching colour as per existing colour of the wall. Proper joints in pipes, bends/elbows/ junctions are to be provided as per site requirement | — | — | — | 8,944.2 | |
| for | Item Breakup | details. | — | ||
| Dismantling of 22.5 mtr flood light towers (Old Lattice towers) by cutting into small pieces using hydra shifting and staking at nearest electrical depot as per scope of work | — | — | — | 93,000 | |
| for | Item Breakup | details. | — | ||
| Supply & Erection cable trays of size 300 mm width made out of angle 50 x 50 x 6 mm and flats ofsizes 50 x 6 mm as perexplanatory notes.including all accessoriers for fittings | — | — | — | 2,37,693 | |
| for | Item Breakup | details. | — | ||
| "Design, manufacture, display of wall / hanging / floor mounting type LED illuminated sign / direction boards in half elliptical shape. The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2 mm thickness. The text / graphics matter visibility shall not be less than 160 deg. The approved colour text and graphics shall be printed / router cut on monomeric calendered vinyl of 70 um thickness and shall be firmly pasted on display sheets. The mounting arrangement shall be hanging, wall mounting, eiling mounting, pole mounting or floor mounting and as per site requirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage to avoid rusting and entry of dust. The LED board shall have uniform illumination with 4-8 W / sq. ft and with brightness more than ambient light. Suitable size end cap of 1.5 mm thick SS 304 should be provided." | — | — | — | 1,69,855.4 | |
| for | Item Breakup | details. | — | ||
| Erection and installation of above said boards as per Railway's specification | — | — | — | 16,985.8 | |
| for | Item Breakup | details. | — | ||
| Pucca Cable trench: Construction of cable trench and laying of UG cable in 700 mm deep cable trench made of RCC withMS channel . This includes supply of all materials erection, commissioning of cable & trench etc. The laying of cable fromtransformer to the panel board shall be done in cable trench made of RCC complete with excavation of soil, constructionof RCC wall for a height of 700 mm and inside width of 500 mm. Both wall and bottom surface of inside trench shall befinished with a fine coating of plaster. This constructed cable trench shall be covered with concrete slabs each of requisitewidth and length . | — | — | — | 41,790.89 | |
| for | Item Breakup | details. | — | ||
| Supply & erection of GI earth strip 30/25 x 5 mm | — | — | — | 3,274 | |
| for | Item Breakup | details. | — | ||
| TP switch, Metal/Iron clad,415/500V, 63 Amp capacity: Supply of complete material for tion, fabrication, fixing,connecting, testing & commissioning of LT panel /MDB /SDB as per Railway specification | — | — | — | 50,867.3 | |
| for | Item Breakup | details. | — | ||
| Fabrication of Box outdoor typeof size 1 m x 1 m x 0.40 mmade out of MS sheet of 1.6mm duly primered and powdercoated paint for housing the pump panel. The box shall have door arrangement at the frontside and suitable channel/angles frame for support and tobe grouted on proper cementconcrete foundation etc. | — | — | — | 24,331.5 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
AC08to10.pdf
ATTACHMENT
35-2025tender.pdf
ATTACHMENT
GCCcorrectionslips.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .