WBPWD/EE-II/CKHED/NIT-57/19-20

Amount

DISTRIBUTION WIRING

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FRLS' PVC insulated & unsheathed copper wire (Finolex/ Havells/ Polycab/ RR kabel) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FRLS' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Legrand / Schneider/ Anchor) fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [only PVC Rigid Conduit on ceiling and remaining portion concealed]

Avg run 10 mtr

Avg run 8 mtr

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FRLS' PVC insulated & unsheathed single core stranded copper wire (Finolex/ Havells/ Polycab/ RR kabel) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Legrand / Schneider/ Anchor) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish a)2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC

(On Board )

Average run 1.5 mtr

Cutting channel of 31 mm x 31 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire fish wire incl. mending good damages to building works. 13 mm dia 3 mm thick polythene pipe without earth continuity wire

Cutting channel of 40 mm x 40 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works. 19 mm dia 3 mm thick polythene pipe without earth continuity wire.

Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works.

100 mm x 100 mm x 65 mm

150 mm x 100 mm x 65 mm

175 mm x 100 mm x 65 mm

200 mm x 150 mm x 65 mm

Supply & Fixing bakelite / perspex top cover on existing Inspection board by Brass screws

100 mm x 100 mm x 65 mm

150 mm x 100 mm x 65 mm

175 mm x 100 mm x 65 mm

200 mm x 150 mm x 65 mm

Supplying and Drawing 1.1 KV single core stranded 'FRLS' PVC insulated & unsheathed single core stranded copper wire (Finolex/ Havells/ Polycab/ RR kabel) of the following sizes in the prelaid polythene pipe 25mm/19mm as required and by the prelaid GI fish wire and making necy. connection as required

a) 4x126/0.4 (16 sqmm) + 2x80/0.4 (10 sqmm) as ECC.

b)4x80/0.4 (10 sqmm) + 2x84/0.3 (6 sqmm) as ECC

c)2x6 sqmm+1x 4 sqmm ECC)( TPNDB to SPNDB )

d)2x4 sqmm+1x 2.5 sqmm ECC

e) 2x2.5 sqmm+1x 1.5 sqmm ECC

BDB,PDB,VTPN ETC

S&F 415V 6-Way double door Vertical TPN DB in S.S. enclosure (thickness of enclosure min. 1.5 mm) with IP-42/43 protection flushed in wall consisting with 1 no. 160A. 4 pole, 25 kA MCCB as incomer, 6 nos. 63A. TP MCB (c-curve) as outgoing complete with DIN Channel, Neutral Bar, Earth Bar with two number cable end box and other accessories & connection with suitable size of Cu. wire with proper socketing incl. necsy. earthing attachment. (Make :- Legrand / ABB ITUS)

Supplying and fixing 415V,16-32A per way , double door Horizontal TPN MCB Distribution board with IP-42/43 protection, with 4 pole isolator as incomer and SPMCB's ('C' curve,10kA) as outgoing concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment with two number cable end box . (Make:Legrand/Siemens) a) 6 way,,100A FP isolator,18 nos. SPMCBs as outgoing

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, with DP isolators as incomer and SPMCB('C' Curve,10A) as outgoing, fixing at flat iron frame on wall &mending good the damages to original finish; inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.(Make: Legrand/Siemens) i) (2+14)Way, with S&F 240V 63 Amps DPMCB isolator as incomer and 240V 6-32A SPMCB of Breaking capacity 10KA & C characteristics 14 nos as outgoing,

PLUG & SOCKET

Supply & Fixing 240 V, 4 nos. 6/16 Amp combo, 3 pin Modular type plug socket with 4 nos. 16A Modular type switch (Legrand / Schneider/ Anchor), 20A Modular switch type SP MCB (C-Curve) and Indicator without plug top on suitable size 2 row GI Modular type switch board with 2 row top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 6-16 A combo, 3 pin Modular type plug socket (Legrand / Schneider/ Anchor) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 4 nos. 6 A, 3 pin Modular type plug socket with 4 nos. 6A Modular type switch (Legrand / Schneider/ Anchor), 16A Modular switch type MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Computer Board

Supply & Fixing 2 nos 240 V, 16 A, 3 pin Modular type plug socket (Legrand / Schneider/ Anchor) with 16A Modular type switch, without plug top on 6 Module GI Modular type switch board with 3 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

SUB HEAD-3 SUPPLY OF CABLE

Supply & delivery of XLPE/A Al cable with 2 nos 10 SWG GI wire as ECC.(Make- Havells/Polycab/Gloster) as per choice of EIC.

4core 70 sqmm (For charging VTPN)

LAYING OF CABLE

Laying of cable above 3½ core 50 sqmm and up to 3½ core 90 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting

FINISHING OF CABLE

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :

4core 70 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solder less socket (Dowels make), tapes, anticorrosive paste & jointing materials

4core 70 sqmm

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

SUPPLY OF LIGHT FITTINGS

S&F of 240V 36/34 watt recess mounted LED slim (2' x 2') light fittings complete with all accessories. incl hanging provision suitable for 2'x2' grid ceiling to be fixed in false ceiling by S&F GI wire from ceiling with anchor fasner or bullet, nut, bolt etc. and necy. connection by 2 x1.5mm² PVC insulated Cu. Wire per direction of EIC.. [Make:- Philips, Cat No.RC380B LED36S-6500 G4 L60 W60 PSD OD / Wipro, Cat - CRCO10RO38HP57SLAB ]

Supplying and fixing of recessed mounted 1'X1' led light fittings of 17 Watt having minimum lumen output 1500 lumen and necy. connection by 2 x1.5mm² PVC insulated Cu. Wire per direction of EIC.. (Make -Philips-RC375B LED15S/865 PSU W30L30 PCV IN/Crompton/Syska)

Single LED T/L fittings [Make : Philips, TMC 501 P 1xT-LED or Wipro, Cat - WIO921208 incl. S&F 1 x 18 / 20 Watt Master LED Tube lamp. [Make: Philips, LED Tube 1200mm 18W 865 T8 I / Wipro, cat no LL13-181-65SE / equivalent product of Crompton).

S/F BC LED lamp (B22) as per direction of E.I.C. (Make- Philips)

a. 9 Watt

S & F of 240V, 8/9 watt recess mounted square (165 x 165 mm) slim panel LED downlight . [Make - Philips, cat no DN 097 LED 10S 6500 PSU WH / Equivalent product of crompton / Wipro having similar specification in all respect).

FIXING OF LIGHT FITTINGS

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “U” type MS clamp whose both side fixed on ceiling with suitable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

SUPPLY OF FANS

Supplying & Delivery of 250 volts, 50 Hz 1200mm (48”) sweep A.C. ceiling fan complete with all accessories viz. down Rod, Canopy, Fork etc. including connections as reqd. as per choice of E.I.C. (Make-Crompton Aura/Orient Gratia)

S/F of 240V., 1420 RPM, 300mm (12") Dia A.C. Exhaust Fan (EPC Electrical Pvt. Ltd. - Heavy Duty) incl. Cutting hole on wall, S&F Louver Shutter with Nuts, Bolts, washers etc. & mending good the damages to original finish.

FIXING OF FANS

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991)

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc.

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod up to 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.

Painting up to 10 letters of the engraved number with approved black /red paint as required

MISCELENEOUS

S&F of 3-ph timer DBs for automatic on/off ductable/concealed split AC M/C s having (2+12) way SPN DB enclosure or equivalent MS box with digital time switch (RTC),40A ,TPn MCB 6A SP MCB for motor start/stop AC on /off indicator etc.and necessary connection by suitable size copper wire as per direction of EIC (Make Siemens/L&T/Hager)

S & F 250V 25A Timer controller for AC machine in SS double door 2+10-way DB enclosure with S&F following electrical accessories & front door locking arrangement with all connection by finishing the ends of 2x4 & 1x2.5 copper wire dowells solderless socket by crimping method as to GS earthing attachment on wall incl necessary connections as per direction of EIC :- (Make-L&T/ABB/Schneider) i) 20A DPMCB --- 1 No ii) 24 Hr programmable Digital Timer ---- 1 No iii) 3 pole power contractor with 1 NO +1 NC additional contact block ---- 1 set iv) 2 Moduler AC motor stater ---- 1 No. v) 2 Module plate with cover -- 1 No vi) 20A Auto-Off-Bipass SPDT toggle switch ---- 1 No. vii) 10A SPST Moduler type switch - 1 No. viii)Outgoing connector (Approved/reputed make) - 1 No

Supplying & Fixing Industrial Plug & Socket board with 415 V, 30A, TPN & Earth Metal Industrial Plug socket & 30A Industrial top incl. S&F 32 A TPN/FP MCB breaking capcity 10kA (C- Curve) in SS enclosure fixed on wall and nececessary conection.

Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board

Supply & Installation of floor mounted, cubicle type, indoor, compartmentalized, 415V., 50 Hz. dust & moisture proof LT Distribution panel having IP-54 protection manufactured by CPRI approved Panel builder having CPRI Certification (minimum IP54, S/C minimum 65kA and Temperature Rise Test). Panel should be fabricated out of 2 mm thick CRCA sheet steel and base channel of MS section not less than ISMC 100mm x 50mm x 5mm and for operator safety, IP2X (touch proof) protection to be available even after opening the feeder compartment door. Paint shade should be RAL 7032 both inside and outside. Continuous Copper Earth bus of size 40 x 5 mm to be provided. Cable alley should not consider multilayered cable run and should be spacious to ensure easy and speedy disconnection & reconnection of cables during maintenance.

Incomer

MCCB: 415V (Uimp=12kV peak), Icu@415V=Ics=Icw for 1 sec = 50kA, 4P Communicable, MCCB with microprocessor based LSIGN release having numerically adjustable overload with time delay, short circuit with time delay, Instantaneous current, Earth fault with time delay, neutral protection - (min. 50%, 100%), & inbuilt current, Voltage, unbalance, power, Energy (Class 1), MD with date & time stamp, power factor, %THD etc. measurement and display in above local display, ZSI, test facility etc. Both side spreader link, extended rotary handle etc. There should be LED indicating lamp for showing On, OFF, TRIP indication on the panel door. There should be Electrical and mechanical interlock between two incomers. [ make : ABB/ Legrand/ L&T/Schneider/ Siemens] i) Incomer: 50KA 250A: 1 set.

Bus Bar Chamber & Interconnection

S/F of 415V, 500 Amp capacity 99.9% - 99.5% electrolytic tinned copper ( Type test Certificate should be produced by manufacturer) semi soft, tined electroplated with heat srinkable PVC sleeve 4 Bar Bus Bar of [4 x (32x 10)mm] size mounted on non-hygroscopic porcelain insulator / hylam sheet having sufficient di-electric strength. All inter connection for in coming to busbar & busbar to out going sholud be done with suitable size copper bar covered with proper colour heat shrinkable sleeves - 1 set.

Outgoing

S/F of 415V, 100 A, 50 Hz, 36KA, 4 P thermal magnetic MCCB [make : ABB/ Legrand/ L&T/ Schneider/ Siemense] - 4 SET

S/F of 415V, 63 A, 50 Hz, 36KA, 4 P thermal magnetic MCCB [make : ABB/ Legrand/ L&T/ Schneider/ Siemense] - 3 SET

Accessories

LED Indication lamp: Red/ Yellow/Blue for Phase with sliding fuse.

Front Disply Module (FDM) for disply of I/C MCCB parameters---- 1set.

Danger Board

GLOW SIGN BOARD

Supply & Fixing of outdoor type LED SIGN Board fabricated from 3 mm thick ACP sheet on all six sides finished with approved metallic colour & suitable size hollow Al rectangular bar as frame inside the box. All LED Module, wiring to be fixed inside the ACP box. Silicon adhesives, SS screws to be used in such a way so that ingress of water can be restricted inside the box and maintenance/replacement of the LED modules can be done easily. All screws/nuts & bolts/clamps etc metals used inside the box should be of non-ferrous metal/Stainless steel. Appropriate size of MS Angle, nuts/bolts and clamp to be used outside for fixing the box.

Supply & Fixing of Special type of 3D Boxing type letter with top cover openable made from imported 3mm thick Acrylic sheet to accommodate LED module. Only front side of the letter should emit light. side to be made from opaque acrylic sheet. Letter height, width & depth of the letter will be proportionate & as per direction of E.I.C.. Suitable Ratio should be maintained between the letter size, spacing between each letters & spacing between each words as per the direction of the E.I.C. (Calculation of area (square inch) of a letter will be Height Breadth of the letter inclusive all wastage.

Supply & Fixing of LED within the acrylic letter from backside (Make: SAMSUNG/Mean well or equivalent) having the following specifications: COLOUR:WHITE or as per the choice of EIC. LIFE:70,000 burning hours. INTENSITY: Uniform without any bright/dark patches. VISIBILITY: 100Mtrs at least for normal eye vision. AMBIENT AIR: 0-50°C; 100% Relative Humidity. POWER CONSUMPTION: 1.5 Watt per module. (1 module consists of 3 nos LED)

SITC of water proof Power Supply unit to be fitted inside the Sign board box. inclusive of water tight gaskette fitted stainless steel hinged door box. Input: 100V-240V AC; 4A; 50Hz. Output: 12V DC; 17-20A constant power supply. Make: Mean well/Ven/Resign or equivalent.

Supply & Fixing MS Structure for holding 15'x5' LED sign board by 65x65x6 angle as Vertical members and 50x50x6 angle and 25x6 MS flat as horizontal member including painting the MS structure and fixing with CC foundation on the roof as per direction of the EIC.

Supply & Laying 2 core x 6 sq.mm PVC/A(AL) cable on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. Mending good damages and Painting.

Supplying and Fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured Cables as below:

For 2 cores: up to 6 sqmm.

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solder less socket (Dowels Make), tapes, anticorrosive paste & jointing materials: a)For 2 cores 6 sqmm. Cable

For 2 cores: up to 6 sqmm.

Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment incl. supplying and fixing 240/415 V 16/32A DP MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection

2 way [D-9/11 & D-6/7]

EARTHING

Excavation of soil for installation of Earth Electrode and filling & ramming. (For Soft Soil)

Earthing with 50 mm dia ISI-Medium GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level.

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.

Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.

MISCELENEOUS

Supply & Installation of Touch Screen Surgeon Control Panel for controls for the modular operation Theatre are provided on a membrane / single touch screen monochromatic graphic display . This micro controller based electronic control panel is mounted directly on the theatre wall. standard control panel consist of the following features: Real Time clock Elapsed time clock Temperature and humidity control and display Lighting control / dimming (peripheral and surgeon light) Medical gas alarm systems Hands free telephone Laminar flow status [ make: Altos Engineers Pvt. Ltd / Medikar / Bio-X]

Supply & Installation of high resolution 1/3'' IR indoor type Colour CCD Camera capable of work in the low light. (min 0.1lux) [ make: Sony / Honeywell / Panasonic ]

Supply & Installation 12V Power supply unit suitable for CCTV system.(make: iBall / Zebronics / meanwell)

Supply & Installation of 8channel standalone DVR with HDMI support having minimum 2TB storage capacity. [ make: BOSCH / Honeywell / Panasonic ]

Supply & installation of surveillance Hard Disc Drive 2TB.(Make: Seagate / Toshiba / Sony)

Supply & Installation of 18.5"/19" LED TFT monitor. [ Sony /Sumsung / Dell]

S& F BNC connector

Supply & Laying of Coaxial (RG-6) cable

Testing & commissioning charge of CCTV

SITC of 10KVA True Online Double Conversion IGBT based UPS system with Advanced DSP based Technology having minimum output power factor 0.8 with 415V Three phase input & 240V single phase output and following minimum accessories. a) in built/ External isolation Transformer with cabinet at input side. b) Paralelling kit. c) Modbus TCP/IP card c) Suitable size Battery rack d) Total minimum 12096VAH SMF battery for each UPS to provide 30mins. Battery backup at Full load. Make : Amararaja Quanta / Exide Power Safe [ VERTIV make Liebert ITA 10KVA / NUMERIC make Digital HP MAX 10KVA / APC E3SUPS10KH /Delta Model No HPH-10K]

Terms and Condition

The Agency must procure the materials from the Manufacturer / OEM or from their authorised sales channel so that the standard warranty / support of the Manufacturer / OEM becomes applicable to the products to be delivered and installed by them.

Documents that authenticates such procurement from the Manufacturer / OEM or from their authorized sales channel and standard warranty / support should be sent from the e-mail of the Manufacturer / OEM / authorized sales channel to the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution, of work/submission of bill.

If any refurbished material is supplied and installed, penal action will be taken as per existing rules

Rate should be quoted incl. of all taxes and cess.

Defect Liability period : 3 years

STANDARD BUILDERS

Electromech Engineers Co-Operative Society Ltd.

S. A. ENTERPRISE

Cons Engineers Co-operative Society Ltd.

S S Enterprise