REPAIRS / REPLACEMENT TO JOINERY FLOORING SANITATION AREA ROLLING SHUTTERS ANTI TERMITE TREATMENT WATERPROOFING TREATMENT AND OUTHER CONNECTED ITEMS AT INS HAMLA UNDER GE(NW) BHANDUP

Amount

Taking down cement mortar or lime plaster of any description from stone or brick wall etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish materials out side MD and including necessary scaffoldings complete all as specified and directed.

M & L for Rendering 15mm thick in (1:6) CM on fair faces of brick work or concrete surfaces of walls and finishing even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of alkali resistant primer using roller etc complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of alkali resistant primer using roller etc complete all as specified and directed.

M & L for Rendering 20mm thick in (1:4) cm (in two coats (15+5mm) with both coats mixed with liquid water proofing compound, surface finished even and fair without using extra cement complete all as specified and directed. ( Note : WPC will be measured separately).

M&L for for preparation of new plastered surfaces of walls, chajjas, slab projections and applying two coats of 100% Anti fungal acrylic emulsion paint in approved shade over a coat of primer and including necessary scaffolding complete all as specified and directed.

M&L for for preparation of old plastered surfaces of walls, chajjas, slab projections and applying two coats of 100% Anti fungal acrylic emulsion paint in approved shade over a coat of primer and including necessary scaffolding complete all as specified and directed.

M&L for Removal of plant growth by injection with chemical glyphospate solution ( 4 % conceneration ) @ 20ml or till refuse by cutting or injection in stem of plants or roots at 30mm. The area shall then be sprayed with solution 25ml glyphosphate ( 4% concent) dulited with 1 ltr of water. All roots / plants shall be removed completely and making good the distrubed surface and painted with cement base or acrylic paint complete all as specified and directed.

Demolition of brick work built in CM incl. taking out roots vegetation if any at any position and removal to out side MD land complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc. 6m mean radius built in CM(1:6) complete all as specified and directed.

Dismantling/Demolition of existing roof terracing of cement/brick concrete(un-reinforced) and existing water proofing treatment of any thickness in any position on top of roof of building, cleaning surface of roof with brush/mechanical brush and with water throughly to romove all dust/dirt and loose particles to expose bare concrete roof slab and romoval of rubbish/demolished material out side MD land complete all as specified Note : Demolition should be done by chiselling.

M&L for brushing neat cement slurry @ 3 Kgs of cement per Sqm complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:3 on fair faces of brick work or concrete surfaces on roof finished even and smooth using liquid water proofing compound as per manufacturers instructions Complete all as specified and directed. (Note :- Supply only liquid water proofing compound shall be measured & paid separately).

M&L for PCC 1 : 2 :4 type B0 (using 12.5mm graded stone aggregate) as in levelling padding course over RCC roof surface including rounded or chamferred on edges etc mixed with approved water proofing compound all as per manufacturer'ss instructions on the roof surface to achieve requisite slope all as specified and directed. (Note : Supply only water proiofing compound shall be measured & paid separately)

Supply only polymer based liquid water proofing compound complete all as specified and directed.

M&L for providing 4 mm thick APP modified memberane over (Accessible) RCC roof with the following specifications :- (a) Cleaning existing surface properly. (b) Apply oil bound bitumen primer @ 0.40 lit/Sqm manufactured by the same agency as that of APP with a density of 0.87 -0.89 Kg/Lit at 25 Degree Centigrade on the prepared dry roof surface. (c) providing and Laying APP modified water proofing membrane reinforced with non wooven polyster matt with physical propertities as under :- (i) Membrane weight >3.6 Kg/Sqm . (ii) Net wooven polyster weight >160 gm/Sqm (iii) Softening point of membrane > 150o C (iv) Joint Tensile strength Longitudiual > 650 Sq Cm at 230o C & Transverse > 450/ Sq cm (v) Tear strength - Longitudual > 300 N & Transverse > 250 N Direction (vi) Elongation > 30 % (vii) Impermeability under water pressure > 3 Kg/Sq cm Note :- APP membrane shall be laid using butane torch by Torch application with minimum 10 cm side overlap and 15 cm end lap. The laying of membrane shall be got done through authorised applicator of manufacturer of membrane. (d) Over the membrance provide 20-25 mm thick machine pressed cement concrete tiles 300mm x300mm over & incl cement screed bed 15mm thick in CM 1:4 set and jointed, pointed in neat cement slurry with grey cement complete all as specified and directed".

M&L for providing 4 mm thick APP modified memberane in repairs including removing old treatment over (Inaccessible) RCC roof with the following specifiations :- (a) Cleaning existing surface properly. (b) Apply oil bound bitumen primer @ 0.40 lit/Sqm manufactured by the same agency as that of APP with a density of 0.87 -0.89 Kg/Lit at 25 Degree Centigrade on the prepared dry roof surface. (c) Providing and Laying APP modified water proofing membrane reinforced with non wooven polyster matt with physical propertities as under :- (i) Membrane weight >3.6 Kg/Sqm . (ii) Net wooven polyster weight >160 gm/Sqm(iii) Softening point of membrane > 150o C (iv) Joint Tensile strength Longitudiual > 650 Sq Cm at 230o C & Transverse > 450/ Sq cm (v) Tear strength - Longitudual > 300 N & Transverse > 250 N Direction (vi) Elongation > 30 % (vii) Impermeability under water pressure > 3 Kg/Sq cm Note:- APP membrane shall be laid using butane torch by Torch application with minimum 10 cm side overlap and 15 cm end lap. The laying of membrane shall be got done through authorised applicator of manufacturer of membrane. (d) Over the membrance provide a finishing with solar reflective bituminous aluminium paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane

Removing loose concrete carefully by low impact hammer bracker or manually by chisel and hammer machanisuem including necessary scaffolding and removal of debris out of MD land Complete all as specified and directed. REHABILITATION WORK ITEMS 18 TO 24 Note : 1. Rehabilitation works is to be carried out by the authorised rep / applicator of the manufacturer and will render certificate at the stages to the effect that work / methodology has been executed / adoped as per the prescribed norms. 2. The rate for rehabilitation works includes necessary scaffolding, form work, steel props, and safety works like barricade, safety net, dust net etc as per site requirement.

M&L for applying rust remover on existing reinforcement and before application of protective coating the surface should be wire brush and throughly cleaned for dust complete all as specified and directed. Note : Mode of measurement shall be for the superficial area of concrete scaled only.

M&L for applying of anti Corrosive primer for exposive steel reinforcement complete all as specified and directed.

M&L for providing and applying structural grade EPIBOND-21-LP prior to application of any type of mortar plaster or micro concreting conforming ASTM-C-882-91 (Arizona Slant Shear Test) to ensure bonding between old concrete and new concrete complete all as specified and directed.

M&L for building up the profile of structural members using polymer modified mortar upto 20mm thickness including levelling, profiling etc complete all as specified and directed. Note :- Mode of measurement : Superficial area of concrete will be measured.

M&L for building up the profile of structural members using polymer modified mortar upto 40mm thickness including levelling, profiling etc complete all as specified and directed. Note :- Mode of measurement : Superficial area of concrete will be measured.

M&L for casting & repairing of excessively damaged distressed RCC members (exceeding 40mm in thikness) with prebatched, prepacked, single component ready to use microconcrete of approved make at any level and at any lead or lift as directed including prefabricated water tight formwork, centering, scaffolding, also including mixing , laying, levelling, finishing, curing etc as per manufacturer's specifications complete all as specified and directed.(Note : Reinforcement only shall be measured and paid separately).

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories)

S&F 160mm bore PVC (SWR) pipe single socketed(ISI Marked) any length with rubber ring joints , complete fittings etc fixed to walls etc complete all as specifed and directed.

S&F 110mm bore PVC (SWR) pipe single socketed(ISI Marked) any length with rubber ring joints , complete fittings etc fixed to walls etc complete all as specifed and directed.

S&F 75mm bore PVC (SWR) pipe pipe single socketed(ISI Marked) any length with rubber ring joints , complete fittings etc fixed to wall fixed with MS clamps8mm dia with two nuts wall nails etc including taking down of any type complete all as specifed and directed.

S&F 160mm dia PVC bend any radius with or with out access doors etc, completed as specified and directed.

S&F 110mm dia PVC bend any radius with or with out access doors etc, completed as specified and directed.

S & F 110 mm bore PVC (SWR) Branch piece, single (single Y) equal or unequal of any radius with access door complete all as specified and directed.

S & F 75 mm bore PVC (SWR) Branch piece, single (single Y) equal or unequal of any radius with access door complete all as specified and directed.

S & F 110 mm bore PVC (SWR) Vent Cowl complete all as specified and directed.

S & F Bands, straps, supports, hold fasts or stays for wooden post, two or three way and securing complete conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for providing stages wise waterproofing treatment to sunken portion surface area bottom & sides of toilets as under. Stage 2: Providing 15 mm thick plaster in CM 1:3 mixed with integral water proofing chemical of approved make in the proportion /quantity all as per manufactures instructions. Stage 3 : Primer - Mix Primer of approved make with water in ratio 1:1 @ 250 gms/sqm and apply the primer on the plaster surfaces Stage 4 : Application of 1 st coat of water proofing compound of approved make without dilution with water@1kg/sqm by brush all as per manufactures instructions. Stage 5: Laying 50 GSM fyber glass cloth over the 1st coat while the coated surface is still tacky Stage 6: After 6 to 7 hours interval apply second coat i.e final coat of water proofing compound of approved make without dilution with water by brush as per manufactures instructions.@1kg /Sqm Stage 7: Providing 10mm thick protective plaster in CM 1:3 mixed with water proofing compound of approved make @ 250ml/50kg cement all as manufactures instructions.

M&L for cement concrete Type E2 1:5:10 using 40 mm graded aggregate or brick bats as in lean concrete complete all as specified and directed.

S&F EWC wall hung WC With in built jet pp soft close silm seat hinges of approved make wall hanging type with plastic sheet cover all as specified and directed of size (H x W x P) 365 x 525 x 400 mm with ‘P’ trap distance 22.5 cm complete all as specified and directed.

S&F vitreous China squatting pan, 'orrisa' pattern WC of size 580 x 440 mm white with integral foot rest (excluding flushing cistern and flush pipe but including 'P' or 'S' trap and provision of lime concrete bedding in repairs complete all as specified and directed. Note:- flushing cistern and flush pipe will be measured and paid under supply only rate.

S&F in repairs vitreous china wash down water closet pan (padestal pattern), white complete including seat cover and connection to trap and to flushing pipe, anti syphonic pipe etc., complete all as specified and directed.

M&L PVC single piece slim concealed cistern body with installation kit & P type drain pipe connection set for wall hung WC flushing cistern, with inlet, ball valve, float including fiush control plate and flush pipe and fixed in repairs complete all as specified and directed.

M&L PVC valveless, syphonic action type, 10 ltrs cap flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe 32mm dia and fixed in repairs complete all as specified and directed.

Supply only PVC connector 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Dismantling floor, hearth or wall tiling any description and thickness including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and directed.

Demolition of cement concrete in ground floor / paving not exceeding 15Cm thick below or above GL unreinforced complete all as specified and directed.

M&L PCC 30mm thick type B0, 1 : 2 : 4 (12.5mm graded aggregate) in sub flooring complete all as specified and directed..

M&L non-skid coloured joint free ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry over and including provision of bedding layer 15 mm thick in CM 1 : 4 complete all as specified and directed.

M&L glazed ceramic jointless coloured tiles in vertical surface 350x250x7mm / 450 x 350 x 7mm set and jointed in neat cement slurry over and including provision of bedding layer 10mm thick in CM 1 : 3 complete all as specified and directed.

M&L non-skid coloured joint free ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry over and including provision of bedding layer 15 mm thick in CM 1 : 4 complete all as specified and directed.

M&L Machine cut kota stone slab 20-25mm thick over cement screed base and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over in floors over incl 20 mm thick screed bed in cement mortar 1:4 over including finishing even and fair complete all as specified and directed.

M&L for Mirror polishing on old marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed.

M&L Marble work other than white or black/Baroda green 18 to 20 mm thick (table rubbed and polished) in cooking platforms, jambs.flooring and like over and including provision of 15 mm thick cement mortar (1:4) including pointing in colour cement (1 :2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as steps, cooking plateform, and other similar situations complete all as specified and directed.

M&L Cement concreate type B-2 ,1:2:4 (using 40 mm, graded stone aggregate ) 100 mm thick laying in floor / paving and spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green and using require form work complete all as specified and directed.

M&L Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound,Grade ‘A’ all for 100 mm thick pcc slab complete all as specified and directed.

M&L Cement concreate type D-2 ,1 : 4 : 8 (using 40 mm, graded stone aggregate ) 75 mm thick laying in floor / paving complete all as specified and directed.

M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&Lfor Machine pressed precast concrete inter locking paver blocks of any shape and size conforming to IS 15658- 2006 of 60 mm thick M-35 grade with grey cement and pigment with glosey finish and including removing the existing paver blocks complete all as specified and directed.

M&L for cement concrete type C-1, 1:3:6 (20 mm graded aggregate) 75 mm thick as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

S&F PVC cabinet mirror in repairs of size 600X450 mm complete all as specfied and directed.

Demolition of Reincorced concrete in chajjas and similar suspended, slab facia drop etc work complete all as specified and directed.

M&L RCC 1 : 2 : 4 type B1 Nominal mix (using 20mm graded stone aggregate) in chajjas complete all as specified and directed .

M&L RCC 1 : 2 : 4 type B1 Nominal mix (using 20mm graded stone aggregate) in fascias, louvres, parapets and the like complete all as specified and directed .

S&F TMT bars 10mm dia & over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L form work for soffit and sides of chajjas, troughs and similar items including edges rough finished surface of concrete flat complete all as specified and directed.

M&L form work to fins, louvers, fascia rough finished surface of concrete flat complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including similar pattern roof covering complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets complete all as specified and directed.

M&L Hangers 6 mm dia G I (upto 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fasterners 12.5 mm dia 40 mm long complete all as specified and directed.

M&L anodised aluminium snap grid frame work for false ceiling of grid size 605 x 605mm complete all as specified and directed.

M&L Non asbestos fibre cement building boards 4mm thick fixed / inserted to GI frame work complete all as specified and directed.

S&F in repairs Steel rolling shutters 1.25mm thick lath, with out ball bearing, as specified including top cover, locks mild steel with 4 levers, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated complete gear operated type with bevel gear box and crank handle complete all as specified and directed.

M&L Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

M&L Ball bearing for rolling shutters complete all as specified and directed.

M&L Two coat of aluminium paint over a coat of alumimium red oxide primer to new steel surface including preparation complete all as specified and directed.

Dismantling of wrought iron or mild steel work in any description and in any position complete all as specified and directed.

M&L rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates etc conforming to Fe 410-W (Gde-E-250) complete all as specified and directed

M&L roof trusses (framed) trussed, purlins, crange gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E-250) complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc (150micron) coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc(150 micron) coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for post constn, antitermite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete as specified and directed.

M&L for providing and injecting chemical chloropyrphos emulsion conforming to IS-3244(with 20% EC) for post construction antitermite treatment along external wall below concrete or masonry apron @ 2.25 litre per running meter including drilling and plugging note complete all as specified and directed.

M&L for post construction antitermite treatment at point of contact of wood work by chemical emulsion ( in oil or kerosene based solution) @ 0.5 ltr/hole by drilling 6mm dia hole at a downward angle of 45 degree at 150 mm centre to cetre and sealing the same complete all as specified and directed.

M&L Solid PVC color coated Wall Panel Lining consisting of 5mm thick inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

M&L 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.

Demolition of cement concrete any face internal /external unreinforced of any type any level and at any position Ensure that structure is at least 3 days old, Bonding Agent Bond coat with a mixing ratio of 1:2 (one part of Bonding agent of approved make or BIS Approved and two parts of cement). The applied bonding agent should be in tacky condition before topping. Repair Mortar Bond coat with a mixing ratio of 1:2 (one part of Bonding agent of approved make or BIS Approved and two parts of cement) including 10mm Repair Mortar with a mixing ratio of 1:2:4 (one part of Bonding agent of approved make or BIS Approved, two parts of cement and five part of sand) applied in specified area.• After the application of Repair Mortar to keep the surface moist for 12 - 24 cement complete all as specified Note :Acrylic polymer Coating shall be measured & paid seperately.and including necessary scaffolding complete all as specified and as directed.

Supply only Acrylic polymer Coating water proofing compound.

Resecuring or easing & adjusting without taking down door shutter of any description exc 1.00 but n exc 2.00 Sqm each complete all as specified and directed.

S&F in repairs for providing and fixing stainless steel (Grade 304) stainless steel hinges, handles, Stainless steel baskets, stainless steel rollers, Stainless steel hinge Italian patter suitable for cabinet and shelves opening / closing operation , Stainless steel perforated cutlery basket of suitable for cabinet,drawers and shelves opening / closing operation. Stainless steel steel Cup and Saucer basket suitable size of cabinet,drawers and shelves opening / closing operation. Stainless steel designer basket suitable size of cabinet,drawers and shelves opening / closing operation.Stainless steel designer basket suitable size of cabinet,drawers and shelves opening / closing operation Stainless steel designer basket suitable size of cabinet,drawers and shelves opening / closing operation stainless steel roller of size 25mm x 12mm, 505mm lenth suitable for baskets stainless steel vent perforated 1mm thick of size 150mm x 100mm of approved make including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts hing roller ext. and bolts complete, stainless steel bolts etc., of required size complete all as specified and directed.

Supply, fabricate in repairs and fixing with WPC board, one side decorative lamination and other side balancing white,100% termite proof,water proof,fire retardant, 18mm thick heavy density, interior grade cutting , fabricating and suitable fixing for kitchen cabinets and shelves of any size drawers openable leaf complete including fixing only accessories such as Italian stainless steel hinges, handles, magnets as required etc complete all as specified and directed as under :- (a) Stainless steel Handle fancy type 100mm size. (b) Stainless steel hinge Italian patter suitable for cabinet and shelves opening / closing operation. (j) Magnet of suitable size fixed for cabin leafs, drawers Note- The rate includes WPC board and all connecting items mentioned above and The design and pattern should be approved by Engr In Charge.

Taking down chowkats of frames with shutters (without taking off shutters from frames) area exceeding 1.50 Sqm but n exc 4 sq. m each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damages to jambs , walls for taking out hold fast shall be finished identical to existing finish without any extra cost of Gov) complete all as specified and directed.

S&F IInd class hard wood plain solid straight chowkats and framed rebated on the solid rounded put togeather with glue pinned at joints complete all as specified and directed.

S&F 35 mm thick, 2nd class hard wood factory made, plain, framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 2nd class HW 35mm thick glazed and skeleton shutters, open rebated and pepared to receive glass, gauze, etc with sash bar, edges of framing plain, chamfered or rounded, fitted with cut or mitred beads for securing glass, gauze etc sizes of members of shutters SSR part-1 section 8, clause 8.24 (a); complete all as specified and directed.

S&F plain framed pannelled shutters of 2nd class HW 35mm thick with panel of 12mm thick ply wood(BWR Quality) and styles as per IS 1003(part-I) complete all as specified and directed.

Taking down shutters of any description exc. 1.00 Sqm & n.exc 2 sqm and refixing in the same opening complete all as specified and directed.

Taking down chowkats of frames with shutters (without taking off shutters from frames) area not exceeding 1.50 Sqm each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damages to jambs , walls for taking out hold fast shall be finished idetical to existing finish without any extra cost of Govt) complete all as specified and directed.

S&F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, in opening as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site complete all as specified and directed

S&F stainless steel butt hinges medium weight 100mm long complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified and directed.

S&F alluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast alluminium alloy and fixed of length of bolt 300 mm complete all as specified and directed.

M&L extruded aluminium alloy handles, fabricated type, anodised 150mm size complete all as specified and directed.

S&F 300mm, mild steel ordinary rait tail rod pattern springs including roller and roller plate complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

M&L for preparation of old wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel pain complete all as specified.

M&L for MS hold fasts size 25x6mm FI fixed to chowkats complete all as specified and directed.

M & L for Providing PCC 1:2:4 type B1 cement concrete in bed blocks for hold fasts complete all as specified and directed.

Taking down Aluminium chawkhats or frame (w/o taking off shutters from the frames) but not exc 1.50 each complete all as specified and directed.

S&F extruded Powder coated aluminium section as in Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and all directed

S & F aluminium grill conforming to DG- 102 of approved make (10mm X 5.2mm) thick of approved design or equivalent as approved by Accepting Officer and fixing with and including 'F/U' channel not less than 1.5mm thick complete all as specified and directed.

S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

Dismantling of boarding ,any description and in any position complete all as specified and directed

M&L for 18/19mm thick prelaminated particle board with teak wood beading, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

M&L for 2nd class hardwood moulding n. exc 6 sqcm as in cornices, picture rails and the like such as in prelaminated particle board complete all as specified and directed.

S&F continous (piano) hinges, mild steel, bright finish or electro-galvanised complete all as specified and directed.

S&F 150mm size hasp & staple, aluminium anodised, safety type including bolt to hinge plate and fixed with screws complete all as specified and directed.

Deduct Credit for Demolished/ Dismantled material Rs. (-) 49105.00 (Minus) as listed in Schedule of Credit Note1: Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum' Note 2:- The tenderer must keep in mind when quoting rates against items out in multiple store house having height 4 mts to 7 mts. Necessary scaffolding and saftey measures required during execution of work are including in this items.

M/s Mukesh Engineers

Shree Ayyappa Engineering

BREEZE CONSTRUCTION

M/s. Deepak Traders

KRISHNA ENGINEERS

M/s Qureshi Construction Co

M/S VISHRANTA CONSTRUCTION

R.C. Magla and Co.