Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.9 LAccepted-AOC A 46 ARYA NAGAR ALWAR RAJ 301001 | ALWAR | RAJASTHAN | 301001 | L1 | Accepted-AOC L1 | |
| 2 | L2₹38.9 L+₹39,130.50 (1.02%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | Rejected-Technical | - | Rejected-Technical Adverse remarks against firm in WLR |
Tender Value
₹42.4 L
EMD Value
₹84,700
Closing Date
23 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Alwar
GE Alwar
SPL REPAIR TO BLDG NO P-33 (JCO ACCN) AND P-44 (OR ACCN) UNDER AGE B/R -II AT ITARANA ALWAR
2022_MES_563752_2
8115/E8
Open Tender
Civil Works
Item Rate
180 days
Alwar
As per NIT
3 documents required · 3 mandatory
₹500
GE Alwar
₹84,700
Yes
28 Feb 2023
31 Dec 2022
25 Jan 2023
31 Dec 2022
23 Jan 2023
7 Jan 2023
31 Dec 2022 - 5 Jan 2023
Amount
Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc all as directed.
Demolition of plain cement concrete in ground floor and pavings not exc 15 cm thick (below or above ground level) including floor tiles of any description complete all as specified.
Taking down chowkhat or frame with shutters area not exc 1.5 Sqm each (without taking off the shutters from the frame) including cutting holes for hold fasts & making good complete all as specified.
Taking down chowkhat or frame with shutters area exc 1.5 Sqm but not exc 4 Sqm each (without taking off the shutters from the frame) including cutting holes for hold fasts and making good complete all as specified.
Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles.
Demolition of existing lime concrete/PCC padding/roof treatment of any description, any thickness including leveling course of PCC, cement plaster from the roof surfaces of buildings including cleaning of top surfaces in all respect and preparing it for further treatment and taking out and removing the rubbish from site all as directed.
Disconnecting existing water tanks and removing to stores of capacity not exceeding 500 ltrs.
Taking up or down steel water tubing and connections of 15mm bore, fixed in walls, ceiling, floors, trenches etc. all as directed.
Taking up or down steel water tubing and connections of 20mm bore, fixed in walls, ceiling, floors, trenches etc. all as directed.
Taking up or down steel water tubing and connections of 40mm bore, fixed in walls, ceiling, floors, trenches etc. all as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store rubbish off the premises.
Demolition of old existing unserviceable Indian type WC and S&F in repairs vitreous china squatting pan (Orissa pattern) water closet (white) of size 580mm x 440mm with integral foot rests, 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor, complete all as specified.
M&L for rendering in cement mortar (1:4) 15mm thick on stone masonary surfaces or fair faces of brick work or concrete surfaces mixed WPC 3% by wt of cement finished even and smooth without using extra cement complete all as specified and directed. ( Note : Supply only WPC shall be measured and paid seperately).
M&L 15mm thick in CM 1:6 on stone masonry surfaces or on other than fair faces of brick masonry work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 5mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified.
M&L for rendering 20mm thick in cement mortar 1:4 on roof surface or concrete surfaces with WPC finished even & smooth without using extra cement complete all as specified.
M&L cement concrete 75mm thick, 1:4:8 type, D-2 using 40mm graded stone aggregate as in sub base of floors.
M&L machine cut mirror polished kota stone slab flooring 20mm to 25mm thick laid over & including screed bed or bedding layer of 20mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing coplete all as specified and directed.
M&L machine cut kota stone slab 16mm to 20mm thick in riser of steps, skirting, dado and pillar laid over cement screed bed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 10mm thick rendering CM 1:4 complete all as specified and directed.
M&L cement cocnrete type C-1, 1:3:6 (using 20mm graded stone aggregate) as in plinth protection 75mm thick and surface to be finished even and smooth without using extra cement. Plinth protection shall be laid in pannels n.exc 1.50 mtr 6mm wide and 10mm deep joints shall be made between wall & pinth protection and between panels. Joint shall be filled with bitumen mastic and sand in proporation 1:3 (one part of bitumen and three part of sand) complete.
M&L steel framed work as in door frame(Chowkats)/cooler stand etc of angle or other section Grade Fe-290 (Gde E-165), complete, all as specified & directed.
M&L flat iron 25mm x 6mm for hold fast bands, straps, supports or stays for rain water, ventilating pipes incl bolts if required and wall tie, clamps etc.
S&F factory made 35 mm thick plain framed, paneled shutter (Two panels) with lock rail and panel of 9mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces, size of rail and styles as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated using second class Hard Wood rail and styles, fixed to chowkat, complete all as specified & directed.
S&F factory made 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified & directed.
S&F in repairs factory made steel window (box type) with side hung shutters including box type hinges, steel handles and peg stay complete with glazing bars dovetailed or welded incl fixing of lugs in PCC 1:2:4 type B1 using 20mm graded stone aggregate and making good walls & cills to match the existing complete all as specified and directed and shown in drg No TD/2013/01 sheet 1/3 to 3/3.
S&F in repair factory made steel window (box type) with side hung shutters including box type hinges, steel handles and peg stay complete without glazing bars dovetailed or welded incl fixing of lugs in PCC 1:2:4 type B1 using 20mm graded stone aggregate and making good walls & cills to match the existing complete all as specified and directed and shown in drg No TD/2013/01 sheet 1/3 to 3/3.
S&F in repair factory made steel ventilator (box type) with top hung shutter including hinges, steel peg stay, handle and peg stay complete with glazing bars dovetailed or welded incl fixing of lugs in PCC 1:2:4 type B1 using 20mm graded stone aggregate and making good walls & cills to match the existing complete all as specified and directed and shown in drg No TD/2013/01 sheet 1/3 to 3/3.
S&F factory made solid PVC moulded door shutters 30mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC wood grain Sheet on the front Face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain colour PVC sheet reinforced with MS Square tube and S&F in opening as per specification & drawing.
S&F aluminium anozised barrel tower bolt 150mm long stove enamelled black with bright bolt complete all as specified and directed.
S&F 125mm aluminium handles cast type anodised all as specified and directed.
S&F butt hinges of size 100mm medium weight, cold rolled mild steel ISI marked complete all as specified.
S&F 300mm long mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified.
S&F 200mm long mild steel barrel tower bolts, stove enameled black with bright bolts and fixed complete all as specified.
S&F milld steel pressed bow handle 125mm size, oval type stove enamelled black complete all as specifiedf and directed.
M&L reinforced cement concrete (nominal mix) type B-1, 1:2:4 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like.
M&L steel TMT bars 6 to 8mm dia cut to length bent to shapes reqd incl craking, bending spirally for hooping for column hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L brick work with sub class 'B' bricks, straight or curverd on plain to any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed.
M&L walling of random rubble, uncoursed, well bonded, bedded and solidly hearted stone masonary build in CM 1:6 complete all as specified and directed.
S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire & average width of aperture 1.18mm & fixed with tinned tacks or galvanised wire stapples.
S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces, complete all as specified.
M&L preparation of new steel and iron surfaces of any description over 10 cms in width or girth and applying one coat of primer with two coats of synthetic enamel paint of approved tint complete all as specified.
M&L preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint all as specified & as directed.
M&L preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified.
M&L preparation of old painted surfaces of wood and wood based material of any description over exc 10 cms in width or girth and applying one coat of synthetic enamel paint of approved tint all as specified & as directed.
M&L brick work with sub class 'B' bricks, straight or curved on plan exeeding 6m mean radius, built in cement mortar 1:6.
M&L providing precast cement concrete jallies 35mm thick in type B-0, 1:2:4 set in CM 1:6.
S&F mild steel framed work such as grills, guard bars, barred iron doors, railing, framework of water tanks and similar works, conforming to Grade E-165 (Fe 290 ), including welding etc. complete all as specified & as directed.
M&L water proofing treatement to RCC roof slabincluding parapet comprising of following course of treatement/ specified from bottom to top (a) Applying Bituminous primer @ 0.40 Ltr per sqm over plastered surfaces of roof including parapet surfaces. NOTE : Bituminous primer shall be 'TANK MASTIC' manufactured by M/S STP Ltd or 'EMW FLATE' M/S Texas India Ltd (b) Over the priming coat applying hot bitumenous 85/25 @ 1.20kg/sqm (c) laying one layer APP based polymeric membrane of approved manufacturer, 3 mm thick weight not less 3.50 Kgs/Sqm of make super thermolay manufactured by STP ltd or 'Hyper plus'(polyster) manufactured by M/S IWL Ltd or 'Shaliplas' manufctured by M/S Capital Steel and chemical Pvt Ltd as approved by GE reinforced with non woven polyester fabric torching overlap with a propane or a butane gas toarch with a overlap of 75mm at the sides and 100mm at the ends and sealing with bitumen coat membrane shall be taken to a height of 60 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flushing.
M&L providing 50mm thick cement concrete type B-0, 1:2:4 (using 12.50 graded stone aggregate) as in padding on roof . Roof padding shall be laid in two layers of 25mm thick each incl chiken wire mesh shall be placed between two layes of PCC padding. The surface of padding shall be finished even and smooth without using extra cement. False groove shall be made on top of padding complete all as specified & directed. Note : The quoted rates are deemed to be included of chiken wire mesh.
S&F rotational moulded polyethylene water storage tank triple layer (cylinderical vertical with closed top) hoisted & fixed in position all as specified 500 ltr capacity.
S&F in repairs ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20mm bore (minimum weight 210 gms) complete all as specified and as directed.
S&F in repair CP bib taps, cast copper alloy fency type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed.
Refixing old galvanized steel water tubing medium grade of 15mm bore including cleaning with & including new fittings and fixed complete to walls and ceilings or laid in floors in new or old position all as directed.
Refixing old galvanized steel water tubing medium grade of 20mm bore including cleaning with & including new fittings and fixed complete to walls and ceilings or laid in floors in new or old position all as directed.
M&L galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors.
M&L galvanized steel water tubing medium grade of 20mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors.
M&L galvanized steel water tubing medium grade of 40mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors.
S&F in repairs 15mm bore stop cock/angle valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.
S&F in repairs chromium plated shower rose 100mm size with or without swivel joint including fixing to steel pipe of 15mm bore or union complete all as specified.
S&F in repairs vitreous china urinal pot flat back of size 465 x 355mm white (minimum) with grating and union for discharge pipe including bracket, flush pipe & waste pipe complete.
S&F in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified including dismantling & taking out old unserviceable 110mm bore PVC pipe with fittings.
All as per item No 62.00 above but 75mm bore.
S&F in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or to floor complete all as specified including dismantling & taking out old unserviceable 110mm bore PVC pipe with fittings.
All as per item No 64.00 above but 75mm bore.
S&F 75mm bore PVC (SWR) bends, any radius with access door.
S&F 75mm bore PVC (SWR) branch piece, double (double ‘Y’) equal or unequal with access door.
S&F 110mm bore PVC (SWR) bend, any radius with access door.
S&F 110mm bore PVC (SWR) branch piece, double (double ‘Y’) equal or unequal with access door.
S&F PVC (SWR) reducer 110mm x 75mm bore.
S&F 75mm bore PVC (SWR) vent cowl.
S&F in repairs PVC connection 600 mm long suitable for 15 mm bore GI pipe including PTMT nuts on both sides complete all as specified.
Taking out old unsv nahani trap and S&F PVC (SWR) nahani trap plain with PTMT grating including jointing with solvent cement, diameter of outlet 75mm, complete.
S&F in repairs PVC valveless syphonic action type flushing cistern low level 10 ltr capacity white, with inlet ball valve, float and handle and flush pipe 32mm bore including bracket complete as specified and directed.
M&L non skid ceramic tiles (coloured) of size 300mm x 300mm x 7mm thick in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over 15mm thick screed bed in cement & sand mortar CM 1:6 over 25mm thick PCC 1:2:4 type B1 (using 20mm garded stone aggregate) complete all as specified and as directed.
M&L glazed ceramic tiles (coloured) of size 300mm x 450mm x 6-7mm thick on verticle surfaces of wall such as dados, skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over 10mm thick screed bed in cement & sand mortar CM 1:4 complete all as specified and as directed.
S&F gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed 40mm size all as specified and directed.
All as per item No 77.00 above but 20mm size.
S&F in repairs tubular towel rail 20mm dia, D type, 60mm long between flanges (Aluminium anodised).
M&L pre-polished vibration moulded precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment of any colour over and including 25 to 30mm thick sand cushioning layer complete.
M&L precast kerb stone, 30cm,15cm thick and 30cm height built in PCC 1:2:4 using 20mm graded stone aggregate and fixing in CM 1:4 all as specified and directed.
M&L complete removal of existing treatment of walls and applying two coat of oil emulsion distemper (OBD) of appvored shade/tint over and including 1mm thick Birla white puttycomplete all as specified and directed.
M&L preparation of newly plastered surfaces of wall and applying two coats of distemper with distemper oil emulsion white or tinted over and including 1mm thick Birla white putty complete all as specifed and directed.
M&L preparation of newly plastered surfaces of wall & applying three coats of white wash complete all as specified.
M&L preparation of old surfaces of walls including cornices, pilasters etc including brooming or steel wire brushing, scraping down smoke soot moulds, moss, efflorescent salts, trading oil greasy spots and applying one coat of white wash complete all as specified and directed.
M&L preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint over one coat alkali resistant priming paint complete all as specified.
M&L preparation of old decorated plastered surfaces of walls and applying one coat of cement base paint of approved shade/tint complete all as specified.
M&L preparation of new plastered ceiling surfaces and applying three coats of white wash including priming coat complete all as specified and directred.
M&L preparation of old plastered surfaces of ceiling & applying one coats of white wash complete all as specified.
S&F 0.56mm plain aluminium sheeting alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length & and girth as fixed) including dismantling of old sheeting complete all as specified and directed.
Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with hot mixture of bitumen and clean dry sand 1:1 ( by weight).
M&L taking down and removal of loose / disintegrated old concrete / plaster and applying 10mm thick bonding coat of modified styrene butadiene emulsion (SBR Bonding agent i.e. Nitobond SBR 45) in proportion 1 (Nitobond SBR 45) : 1 (water) : 3 (OPC) by volume with the brushes etc to bind New Cement plaster/ polymer Modified plaster/ concrete/ screed concrete with old surface etc complete.
M&L applying 15mm thick plaster with polymer modified mortar fortified with SBR (Nitobond SBR 45 ) in proportion 1:3 by weight 5 litres Nit bond SBR 45 to added to 50 KG Cement with 13 litre water addition, finished surface to match with existing adjoining surface of ceiling, beams and alike complete.
M&L and applying two or more coats of 2 component zinc based epoxy rust preventer (Nitozinc Primer-M) on corroded reinforcement after cleaning and removing the rust from corroded reinforcement with the help of wire brush and treating it with rust remover (Reebaklens RR) including thoroughly cleaning washing air blowing brushing etc complete. Note : Qty of Zinc based epoxy rust prevent or only shall be taken into account for payment purpose on the basis of actual consumption.
S&F WHB oval type of size 580mm x 450mm incl brackets incl waste pipe cutting pinning in ends of brackets complete fixed in granite cutting top of granite as shape of WHB.
M&L roughcast finish plaster on exterior walls in two layers, under layer 10mm cement plaster 1:3 (1 cement: 3 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer applying roughcast mixer consisting of crushed stone or fine gravel agg of size 6 to 10mm depending on texturer reqd mixed with coarse sand and cement in the ratio of 1:1:1 be applied and finish even.
Supply only integral water proofing compound.
M&L granite (of any type) 18mm to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete.
S&F pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.
M&L providing post construction ant itermite treatment alongwith external wall below concrete or masonry apron using chemical emulsion @ 2.25 Litres per linear metre including drilling and plugging holes etc in apron with cement mortar 1:2 (1 cement 2 coarse sand ) complete all as specified and as directed.
M&L anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1 cement 2 coarse sand) to match the existing floors, complete all as specified and as directed.
M&L anti termite treatment of voids in masonry, alongwith wall below concrete or masonry apron using emulsion @ one litre per holes,soil under existing floors using emulsion @ one litre per hole, including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1 cement 2 coarse sand ) to match the existing floors, complete all as specified and as directed.
S&F in repairs stainless steel drapery rod of 20 mm inner dia (in length as directed) of approved colour with & including decorative finial at both ends and pair of powder coated mild steel brackets fixed at both ends with PVC rawl plug & steel screws on walls/beams including PVC curtain rings of matching colour @10 cm c/c all as specified and directed.
S&F in repairs salt glazed stone ware gully trap square or round mouthed type 'P' of size 150mm x 150mm with CI grating, setting & jointing with cement with grouting surrounding gully trap with PCC 1:3:6, type C1 block 30x30x45cm together with necessary form work, excavation & earth work in soft/loose soil, complete, all as specified and as directed.
S&F in repair 110mm stack clamp out of 50mmx 5 mm flat iron and 16 mm dia round iron stays incl bolts and nuts and securing ends of stays to walls or roof etc, complete all as specified and directed.
S&F for 75mm thick steel fibre reinforced (SFRC) man hole cover with iron frames (medium) complying to the standard specifications as mentioned in the IS 12592 BIS Standard, minimum load bearing capacity 5 ton/sqm, in square, rectangular or circular shape complete all as specified & as directed.
Treatement for sunken portion is as follows :- (i) Demolition of lean concrete and other type of filling in sunken portion & cleaned the sunken portion incl vertical wall surface complete as directed. (ii) M&L for providing 12 mm dia holes of 40mm deep @2.00m c/c at junction of beams and columns as co-ordinal points for inserting/pouring cement slurry by pressure grouting for sunken floors of toilet , includind sealing the holes with CM 1:3, all as specified and as directed by EIC.(iii) M&L for water proofing plaster for sunken portion in CM 1:3, 20 mm thick in two coats with water proofing compound at the rate of 2% by weight of cement and finishing the surface even and smooth without using extra cement.(iv) M&L for applyin evenly two coats of industrial bitumen 85/25 at the rate of 1.20 Kg/Sqm in each coat over vertical surfaces and floors of sunken floors of toilet including cleaning of surfaces. (v) M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in filling (sunken portion). etc. (vi) M&L for PCC 1:2:4 type B0 using 12.50 mm graded stone aggregate, mixed with WPC @ 2% by wt. of cement, as sub base, 75mm thick. (vii) M&L for plastering in CM 1:4, 15 mm thick with water proofing compound at the rate of 2% by weight of cement and finishing the surface seven and fair. (WPC will be measured and paid seperately). Note :- above includes (a) Test again of water tightness by pounding for 72 hours & rectify defects if any till total elimination of defect. (b) The sunken portion shall be tested for leakage / seepage / dampness by pounding with water for 72 hours. In case any defect is noticed the portion shall be grouted with cement slurry mixed with suitable chemical & tested again. The process of grouting and testing shall be repeated till leakage / seepage / dampness is eliminated (c) Horizontal flat area to be measered.
S&F in repairs powder coated aluminium double shutter window outer frame size 91mm x 43mm x 1.50mm thick outer window shutter of size 30mm x 38mm x 1.20mm thick with 5.50mm thick glass pane fixed with beading and clip and all necessary fittings, inner window shutter of size 39mm x 17.7mm x 1.20mm thick with and incl stainless steel wire guage with aluminiuem grill type 'B' weight 3.13 kg incl handles, tower bolt etc complete as per drg No TD/2004/34 sheet 1/1 all as specified and directed.
S&F in repairs powder coated aluminium ventilator of frame size 48mm x 24mm with and incl frame head, Actuator bar, 5mm th glass ,louver blade of 100mm (heavy duty), lever handle , aluminiuem grill type B weight 3.13 kg complete as per drg No TD/2004/34 sheet 1/1 all as specified and directed.
S&F aluminum alloy, anodised, sliding door bolt with hasp and staples type, 300mm long and fixing clip of sheet cast or extruded sections and fixing bolts and sliding bolts of extructed section or cast aluminum alloy and fixed all as specified.
S&F aluminium anodised, barrel tower bolt 200mm long of extructed section and fixed complete.
S&F extructed aluminium alloy handle 150mm, fabricated type, anodised all as specified.
M&L non skid ceramic tiles (coloured) 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement & sand mortar CM 1:6 over and including 25mm thick PCC type B0 as leveling course complete all as specified and as directed.
S&F brass CP wall mixer 3 in 1 with L-bend mixing hot & cold water screwed down for iron pipe and fixed in repairs.
S&F in repair vitreous china wash basin with pedestal , white, flat back, size 550mm x 400 mm including one no 15mm bore fancy type mixer taps with hot & cold, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered HOT or COLD with long screwed shanks and fly nuts, screwed for iron pipe, one No PVC waste pipe 25 mm dia and 75 cm long with 32 mm dia connector, 32mm size waste fittings, brass chromium plated with long screwed shanks and fly nuts, flange end, bedded in red lead cement and other fixed and PVC connection 15 mm dia & 600mm long with two Nos check nut and washer complete including cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed.
Taking down carefully copper/aluminium point wiring for one light /socket/power point and taking down of teak wood batten/ PVC casing caping and making good disturbed surfaces of walls/ ceiling/ floors etc including dismentling of fittings complete all as specified.
M&L for point wiring for one light point controlled by one, one way switch with 1.50 Sqmm two single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including PVC casing & caping with accessories fixed on surface of walls/ceiling by means of PVC sleeves/dash fasteners with cadmium plated screws, all as per IS and including wooden boxes fixed on wall with and including 3mm thick phenolic laminated sheet top cover for mounting switches, sockets, fan regulators etc complete all as specified.
All as per serial item No 118.00 here-in-before but for one fan point controlled by one switch and regulator.
All as per serial item No 118.00 here-in-before but for one exhaust fan point controlled by one switch and regulator.
All as per serial item No 118.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board.
All as per serial item No 118.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on independent board.
All as per serial item No 118.00 here-in-before but for one light point controlled two, two way switches.
All as per serial item No 118.00 here-in-before but for one bell/buzzer point controlled by one bell push.
All as per serial item No 118.00 here-in-before but for one 3 pin socket outlet 15/16 Amps controlledby one 15/16 Amps switch on independent board with 2.50 Sqmm two single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour.
S&F switch piano flush type, single pole, one way, 5/6 Amp, 230 Volts complete all as specified and directed.
S&F switch piano flush type, single pole, two way, 5 Amp, 230 Volts complete all as specified and directed.
S&F bell/buzzer AC 230 Volts single pole complete all as specified and directed.
S&F switch piano flush type, single pole, one way, 15 Amp, 230 Volts complete all as specified and directed.
S&F socket outlet for 3 pin (with 2 pin outlet also), 5/6 Amp, flush type 240 Volt complete all as specified and directed.
S&F socket outlet for 2 in 1, 3 pin 5 & 15 Amp, flush type 240 Volt complete all as specified and directed.
S&F ceiling rose surface bakelite 65 x 50mm two or three terminals complete all as specified and directed.
S&F stepped type electronic fan regulator, flush type and connecting up ISI marked 240 volts complete all as specified & directed.
S&F decorative ultra slim liner LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient suitable for 16 Watt to 20 Watt with LED tube of model E-LITE LED Pride Plus and connecting up with and including three core, PVC insulated, sheathed copper conductore cable of required size and length from ceiling rose to fitting complete all as specified & directed. Make :- Havells Cat Part No LHEXBHP71NW018 or equivalent of Philips/ Crompton Greaves /Bajaj/Wipro.
S&F LED type street DRACO Series light luminaire 20 watt 230V 50 Hz including all necessary fitting accessories and LED complete, all as specified & directed. Make : C&S Cat Part No LTESS20WLED or equivalent of Crompton Greaves / Wipro as approved by GE.
S&F LED bulb 10/11 watt complete all as specified and directed. Make : Havell's/Crompton/ Syska.
S&F lamp holder PVC/Polycarbonatetype with back plate suitable forbatten fittings complete all as specified.
S&F sheet metal enclosures, double door type, suitable for fixing TPN with 200 Amps rated bus bar, vertical DB-4 TPN 415 volts complete all as specified and directed.
S&F sheet metal enclosures, double door type, suitable for fixing MCB SPN with 200 Amps rated bus bar, 8 way, 240 volts complete all as specified and directed.
S&F MCB 63 Amps, triple pole & neutral, 415 Volts complete all as specified and directed.
S&F MCB 32/40 Amps, single pole & neutral, 240 Volts complete all as specified and directed.
S&F MCB 6-40 Amps, single pole, 240 Volts 'C' curve, 10KA ISI marked as per IS/IEC 60898-1 2002 complete all as specified and directed.
S&F sub main wiring on including passing throuh PVC conduit pipe 1100 volts grade with PVC flexible cable copper conductor unsheathed multistranded single core of size 6 Sqmm and continuous earth with PVC flexible cable copper conductor unsheathed multistranded single core of size 4 sqmm of green colour confirming to IS 694/1990 including taking down existing unserviceable sub main wiring. (Note : Two runs of cable with one run of earth wire and one run of PVC casing caping should measured as one length).
S&F 2nd class hard wood rectangular block open recessed of size 30 x 25 x 5 cm depth with 3mm thick phenolic laminated sheet top cover fixed with suitable steel screws & PVC rawl plug(4 Nos), complete all as specified and directed.
Supply, laying, jointing and testing XLPE insulated, armoured, heavy duty LT underground electric cable with stranded aluminium conductor 1100 volts grade cross sectional area 25 sqmm 4 core laid in trenches, along poles through pipes etc complete all as specified & as directed. (i) Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately including taking down old unserviceable XLPE cable. (ii) Road cutting/floor cutting /cutting holes etc in walls required for laying/fixing of cable etc shall be made good as per existing. Nothing extra shall be admissible on this account. Quoted rates shall be inclusive of the above provisions.
Supply, laying, jointing and testing XLPE insulated, armoured, heavy duty LT underground electric cable with stranded aluminium conductor 1100 volts grade cross sectional area 10 sqmm 2 core laid in trenches, along poles through pipes etc complete all as specified & as directed. (i) Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately including taking down old unserviceable XLPE cable. (ii) Road cutting/floor cutting /cutting holes etc in walls required for laying/fixing of cable etc shall be made good as per existing. Nothing extra shall be admissible on this account. Quoted rates shall be inclusive of the above provisions.
Excavation in trenches n.exc 1.5M wide and n.exc 1.5M in depth for foundation and getting out in soft/loose soil all as specified and directed.
Returning filling in, including spreading, levelling, watering and well ramming in layers n.exc. 25cm deep as in soft/loose soil copletete all as specified.
Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point.
M&L brick work with fly ash bricks {As per IS-13757 (1993) burnt clay fly ash building bricks}, (Old size bricks) with width equal to the length of the brick laid dry & flat abutted with each other with gap between adjacent bricks not exc 10 mm over UG cable for protection complete all as specified & directed.
M&L dry sand (tibba sand) and punning for cushioning to under ground cable all as directed. Note :- For the purpose of payment only punned thickness shall be measured.
M&L 40mm grade GI pipe (light grade) for protection of LT cable fixed to wall /pole /road crossing including clamps complete all as directed.
Disconnecting from elect connection and taking down carefully the existing electric energy meter of any capacity, any make, any size and depositing the same in AGE E/M Store Yard all as specified and directed by the Engineer-in-Charge. Refixing the same inside the old meter inside box carefully including necessary electric connections complete all as directed.
M&L earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/ equipment and testing on including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre, charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore 3.00 metre long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided on CI frame etc complete all as specified & as directed.
GAR CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .