PROVISION OF BOUNDARY PILLARS AND BARBED WIRE FENCING ALONGWITH GATE AT NAVAL LAND AT HALDIA AND FROST GLASS DOOR WITH NOIC(WB) LOGO AT INS NETAJI SUBHAS UNDER GE (I) (CGN) KOLKATA

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.

M & L for PCC (1:3:6) type C2 with 40 mm graded aggregate as in foundation filling and mass concrete in column & wall foundation, complete all as specified and as directed.

M&L Providing precast cement concrete type B-1 in (1:2:4)(20 mm graded aggregate) columns, posts, boundary pillars, etc. and setting in cement mortar (1:4) complete including marking and crafting of letters etc., complete all as specified and as directed. by Engr in Charge .

M&L for TMT Bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm, complete all as specified and as directed.

M&L for TMT Bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required including cranking, bending and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm, complete all as specified and as directed.

M&L for Framed work as in doors or gates of angle of grade Fe-410 W (Gde E-250 Quality A) or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M&L for Mild steel work as in post and struts in fencing including cutting tops to shape as diredcted, drilling holes, notching for wire, etc, flat iron fillets for securing wire mesh etc,including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe 290 Gde E-165 complete all as specified & directed.

S&F Galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia bars at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified and as directed by Engr-in- Charge.

M&L for preparation of new or previousaly un-treated steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engr-in- Charge.

M&L for Finishing walls with Acrylic Smooth exterior paint of required shade: New work (two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) all as specified and directed.