Supply Installation of 04 Nos. Smriti Dwar in Assembly of Lambhua District Sultanpur

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom, and lift upto 1.5 m, as directed by Engineer-incharge.All kinds of soil. DSR(2.8.1)

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)DSR(4.1.8)

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size de rived from natural sources)DSR(5.1.3)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.Thermo-Mechanically Treated bars of grade Fe-500D or more.DSR(5.22.6).

Steel Work in Built up Tubular (round 0r rectangular Hollow tubes Etc)including cuttting,hoisting ,fixing,in position and applying priming coat of approved steel primer including welding and bolted with special shaped washer etc complete, 10.16.1

25mm dia and 600mm long for foundation bolt including threading nut volt complete. As per MR

Crane charges for installation of post with driver for vertical post.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufactureDSR.(13.48.3)

Supply and erection of retro reflective signage board having 2mm thick aluminium sheet as sign substrate face fully covered with M3 scotchilte Diamond grade DG3 retro reflective prismatic grade sheeting all letters legends and written matter will be computer cut using 3M Scotchilte Electro cut overlay filmy and processed with CAS system as per process recommended by origional retro reflective sheeting manufacture, A 40X40X4mm MS angle iron all around back support frame will be provided to hold sign with overhead gantry/cantilever structure.The rear of sign board including back support frame will be dully painted with one coat of aluminium/MS primer and one or more coat of synthetic enamel paint.