Procurement of Machines/Equipment for upgradation of material Testing Labs, MT division, ID and R, WR, Jaipur

Supply of steel cutter capable of cutting 8mm to 45mm re- bars including cost of transportation , all taxes & levies etc. complete in all respect

Supply of aluminium ladder, 5' height capable to bear 150 kg load, including cost of transportation , all taxes & levies etc. complete in all respect

Supply of vicate apparatus ISI mark as per IS : 5513 including needle set,vicate mould,consistecy plunger etc. with all assesories and calibration certificate, including cost of transportation , all taxes & levies etc. complete in all respect

Supply of aggregate impact testing machine as per IS: 2386 (part4) including cycindrical cup, metal measure, tamping rod , automatic blow counter etc. Including cost of transportation , all taxes & levies etc.complete in all respect

Supply , fixing/ installation, testing & commissioning of laboratory electric oven, with digital indicator cum controller with safety alarm, range 50 oC to 250 oC. +/-1 oC with air circulating fan, S.S., inside size 600 mm X 600 mm X 600 mm (approx.) with all accessories,including cost of transportation ,all taxes & levies etc. complete in all respect.

Supply of Slump test appratus as per IS: 7320 with tamping rod (steel) 16 mm dia , 600 mm length ISI mark as per IS:10086 with all accesories inculding cost of transportation, all taxes , levies etc. complete in all respect.

Supply of flow table appratus with all accessories as per IS:1199, inculding cost of transportation, all taxes , levies etc. complete in all respect.

Supply , fixing/ installation, testing & commissioning of digital accelerated curing tank for 12 moulds of 150 mm x 150 mm x150 mm size , tempreture range ambient 5 oC to 100 +/- 2 oC,fully insulated including hinged lid , heating thermostate, recirculation pump , two removable racks allowing free circulation of water around each cube etc.The pump,drain valves and electrical equipment shall be housed in a separate compartment located at one end of the tank. inculding cost of all civil & electrical works required for fixing/ installation, transportation , all taxes & levies etc. complete in all respect

Modification of existing open cement curing tank of size 5'x3'x2'(approx.) by supply and installation of appropriate metal cover of gauge 16 (supported with adequate supports, hinges, paints etc.), automatic temperature control system (as per IS code 516) , digital temperature display with least count 1oC, water filling, level control, water circulation mechanism in tank around cubes (by circulation pump & metal partition racks for storing cubes at some distance) and drainage arrangement, including cost of all civil & electrical works required for fixing/ installation, testing , commissioning, transportation, all taxes & levies etc. complete in respect.

Supply of distill water machine approx. capacity 4 Litre water/hour with all accesories inculding cost of all civil & electrical works, transportation, all taxes , levies etc. complete in all respect.

Supply, fixing / installation, testing & commissioning of humidifier, capacity of creating relative humidity not less than 90% in the room of approx. size 12' x10' x 10' , having humidity controller with sensor,digital display of humidity including cost of transportation , all taxes & levies etc.complete in all respect

Supply , fixing / installation, testing & commissioning of digital environmental test chamber with cooling temprature range 10oC to 60oC +/- 1 oC , huminidity 50 % to 95% +/- 4% , double walled inner chamber S.S. 304 , digital controller cum indicator , size 600 mm x 600mm x 600 mm (approx.) including cost of transportation , all taxes & levies etc.complete in all respect

Supply of specific gravity apparatus for coarse aggregate as per IS: 2386 (Part3) with density basket , buoyancy balance etc. with all other accessories including cost of transportation , all taxes & levies etc.complete in all respect

Supply of Le-chatelier moulds ISI Mark as per IS: 5514,with all accessories including cost of transportation , all taxes & levies etc.complete in all respect

Supply, fixing / installation, testing & commissioning of Le-chatelier water bath with controller size 24 ''x 9''x 12'' , made of stainless steel, complete with removable rack to hold 12 moulds , with the temperature thermostatically controlled and digital indicator, with all accessories , including cost of transportation , all taxes & levies etc.complete in all respect

Supply of Le-chatelier flask ISI Mark as per IS: 4031-11, including cost of transportation , all taxes & levies etc.complete in all respect

Supply of Pychnometer as per IS: 2386 (Part III), consist of 1 Kg glass jar with brass cone, locking ring and rubber seal including cost of transportation, all taxes & levies etc.complete in all respect

Supply of flakiness measuring appratus ISI Mark as per IS: 2386(part 1) including cost of transportation, all taxes & levies etc. complete in all respect

Supply of elongation measuring appratus ISI Mark as per IS: 2386(part 1) including cost of transportation , all taxes & levies etc. complete in all respect

Supply of Cylinder specimen capping & preperation equipments including all accessories, as per IS 516, including cost of transportation , all taxes & levies etc. complete in all respect

Supply of 20 cm dia.brass, joint less frame sieve set for fine aggregate as per IS: 460 inculding cost of transportation, all taxes , levies etc. complete in all respect.

Supply of G I frame 45 cm dia. IS Sieve set for coarse aggregate with all accessories as per IS : 2720 (part 4) inculding cost of transportation, all taxes , levies etc. complete in all respect.

Supply of 20 cm dia.brass, joint less frame sieve size 4.75 mm as per IS: 460 inculding cost of transportation, all taxes , levies etc. complete in all respect.

Supply of 20 cm dia. brass, joint less frame sieve size 2.0 mm as per IS : 460 inculding cost of transportation, all taxes , levies etc complete in all respect.

Supply of 20 cm dia. brass, joint less frame sieve size 1 mm, as per IS: 460 inculding cost of transportation, all taxes , levies etc. completee in all respect.

Supply of 20 cm dia. brass, joint less frame sieve size 500 micron, as per IS: 460 inculding cost of transportation, all taxes , levies etc. complete in all respect.

Supply of 20 cm dia. brass, joint less frame sieve size 0.425 mm , as per IS: 460 inculding cost of transportation, all taxes , levies etc complete in all respect.

Supply of 20 cm dia. brass, joint less frame sieve size 75 micron, as per IS: 460 inculding cost of transportation, all taxes , levies etc. complete in all respect.

Supply of steel mould, 70.6 mm cube with ISI mark and as per IS: 10080 including cost of transportation, all taxes & levies etc. complete in all respect

Supply of temping rod (steel) 16 mm dia , 600 mm length, rounded at the lower end with ISI mark and as per IS:10086 including cost of transportation , all taxes & levies etc. complete in all respect.

Supply of cast iron mould for 150 mm cube with ISI mark and as per IS: 10086 including cost of transportation , all taxes & levies etc. complete in all respect.

Supply of mixing spatula (karni) 150 mm blade with wooden handle inculding cost of transportation, all taxes & levies etc. complete in all respect.

Supply of sample mixing tray, enamaled including cost of transportation , all taxes & levies etc.complete in all respect.

(a) 300mm x 300mm x 40mm

(b)750mm x 950mm x 40mm

Suply of gauging trowel as per IS 4031(part 6) with steel blade 100 to 150mm in length, with straight edges weighing 210 gm +/- 10 gm inculding cost of transportation, all taxes & levies etc.complete in all respect.

Supply of SS plate size 2'x2', thikness 10 mm inculding cost of transportation, all taxes , levies etc.complete in all respect.

Supply of stop watch, digital, least count 0.1 second, inculding cost of transportation, all taxes & levies etc.complete in all respect.

Supply of Shrinkage dish, size: 45 mm dia, 15 mm depth as per IS:2720 (part 6) inculding cost of transportation, all taxes , levies etc.complete in all respect.

Supply, testing & commissioning of soil cone penetrometer as per IS: 2720 (part 5) with facility for adjusting cone height in relation to the specimen with all accesories, consisting a stainless steel penetration test cone 35 mm long with smooth polished surface with an angle of 30°, total weight of cone & plunger 80 gm, penetration cup, round dotted glass plate size 200mm x 200mm etc. Including cost of transportation all taxes & levies etc. complete in all respect.

Supply, fixing/ installation, testing & commissioning of automatic compactor machine digital as per IS: 2720 (part 7 & 8) with mild steel compaction mould of 1000 CC volume (100 mm dia), rammer- circular faced 50 mm dia adjustable to 2.6 kg weight, drop - adjustable to 310 mm , inculding cost of all civil & electrical works required for fixing/ installation, transportation , all taxes & levies etc. complete in all respect.

Supply, fixing/ installation, testing & commissioning of Permeability apparatus (falling head method) as per IS : 2720 (part 17 ) consistingof three glass tubes - 10mm (2nos) , 20mm (1no) , mould etc. with all accesories , inculding cost of all civil works required for fixing/installation , transportation, all taxes & levies etc. complete in all respect..

Supply of permeability mould as per IS : 2720 (part 17 ) & IS: 292, inculding cost of transportation, all taxes & levies etc.complete in all respect..

Supply, fixing/ installation, testing & commissioning of part/equipment as per IS:2720(part 12) for existing Triaxial shear test machine, inculding cost of all civil & electrical works required for fixing/ installation, testing & commissioning, transportation, all taxes & levies etc . complete in all respect.

(a) Extruder Frame (38mm)

(b) Deformation Dial Gauge with least count 0.02 mm, range 0 to 25mm

(c) Triaxial Cell 38 mm Dia Specimen

(d) Proving Ring with Dial Gauge 2.5 KN with least count 0.02mm

(e) Pressure Gauge up to 10 Kg/cm2

(f) Split Mould 38 mm Dia specimen

(g) Mercury Pot

Supply, fixing/ installation, testing & commissioning of Dispersibility Test Apparatus (pin hole test as per sherad method ) inculding cost of all civil & mechanical work required for fixing/ installation, testing & commissioning, transportation , all taxes & levies etc. complete in all respect.

Supply of Dispersibility Test Mould (pin hole test as per sherad method ) inculding cost of transportation, all taxes & levies etc. complete in all respect.

Supply, fixing/ installation, testing & commissioning of electrical bottle shaker, capacity 12 bottles, including cost of all civil & electrical works required for fixing/ installation, transportation , all taxes & levies etc. complete in all respect.

Supply of airtight sample container(steel) including cost of transportation , all taxes & levies etc. complete in all respect.

(a) 3 ltr capacity, 15 cm inside dia,17cm height

(b) 15ltr capacity, 25cm inside dia,30 cm height

Supply of electronic balance, capacity 60 kg , least count 2 gm, with calibration certificate, inculding cost of transportation, all taxes & levies etc. complete in all respect.

Supply of electronic balance, capacity 20 kg, least count 0.5 gm, with calibration certificate, inculding cost of transportation, all taxes & levies etc. complete in all respect.

Supply of electronic balance 10 Kg capacity, least count 0.1 gm, with calibration certificate, inculding cost of transportation, all taxes & levies etc.complete in all respect.

Supply of electronic balance, capacity 200 gm , least count 0.001 gm, with calibration certificate, inculding cost of transportation, all taxes & levies etc. complete in all respect.

Supply of electronic balance with least count 0.0001 g (capacity 200 g), with calibration certificate, inculding cost of transportation, all taxes & levies etc. complete in all respect.

Supply of digital thermo hygrometer for laboratory , inculding cost of transportation, all taxes & levies etc. completee in all respect.

Supply of Rubber Membrane, 140 mm long, 0.2 mm thick, inculding cost of transportation , all taxes & levies etc. complete in all respect

Supply of Klinger valves for Triaxial Cells inculding cost of transportation , all taxes & levies etc. complete in all respect

Supply of Wash bottles 1000 ml (PVC) inculding cost of transportation , all taxes & levies etc. complete in all respect.

Supply of Measuring cylinder (Glass, class-A, with certificate), graduated 25 ml capacity least count 0.2ml inculding cost of transportation , all taxes & levies etc. complete in all respect.

Supply of Measuring cylinder 100 ml capacity least count 0.5 ml (Glass, class-A, with certificate), graduated inculding cost of transportation , all taxes & levies etc. complete in all respect.

Supply of Measuring cylinder 1000 ml capacity (Glass, class-A, with certificate), graduated inculding cost of transportation , all taxes & levies etc. complete in all respect.

Supply of Measuring cylinder 250 ml capacity (Plastic), Graduated inculding cost of transportation , all taxes & levies etc. complete in all respect.

Supply of Burette 50 ml capacity (Glass, class-A, with certificate), graduated, straight bore without stopcock inculding cost of transportation , all taxes & levies etc. complete in all respect.

Supply of Burette 50 ml capacity (Glass, class-A, with certificate), graduated, straight bore stopcock inculding cost of transportation , all taxes & levies etc. complete in all respect.

Supply of Specific gravity R D Bottles 50 ml capacity (Glass, class-A, with certificate), narrow mouth inculding cost of transportation , all taxes & levies etc. complete in all respect .

Supply of Plastic Bottle for mechanical Test 500ml capacity inculding cost of transportation , all taxes & levies etc. complete in all respect.

Supply of Crucible (porcelain) 100 ml inculding cost of transportation , all taxes & levies etc. complete in all respect.

Supply of crucible (porcelain) with lid capcity 50 ml inculding cost of transportation , all taxes & levies etc. complete in all respect.

Supply of china dish 6' dia. inculding cost of transportation , all taxes & levies etc. complete in all respect .

Supply of Beaker 250 ml, (Glass) , Graduated inculding cost of transportation , all taxes & levies etc. complete in all respect .

Supply of Jug Enameled (Mechanical Analysis)2 Lit. Capacity, good quality, inculding cost of transportation , all taxes & levies etc. complete in all respect

Supply of enamaled bowl 250 ml capacity inculding cost of transportation , all taxes & levies etc. complete in all respect.

Supply of enamaled plate 8" dia inculding cost of transportation , all taxes & levies etc. complete in all respect.

Supply of volumetric flask 1000 ml (Glass, class-A, with certificate), graduated inculding cost of transportation , all taxes & levies etc. complete in all respect

Supply of electric kettle elements 2000 W for distillation plant , inculding cost of transportation , all taxes & levies etc. complete in all respect.

Supply of measuring cylinder (Glass, class-A, with certificate), graduated inculding cost of transportation , all taxes & levies etc. complete in all respect

a) 250 ml , least count 0.5ml

b)50 ml ,least count 0.5ml

c)20 ml , least count 0.2ml

d)10 ml, least count 0.1ml

Supply of Wire basket 6.3 mm mesh inculding cost of transportation , all taxes & levies etc. complete in all respect.

Supply of Funnel Glass accurate 60 deg. angle long stem, size 100ml, inculding cost of transportation , all taxes & levies etc. complete in all respect.

Supply of Weighing Glass Bottle(class A) with stopper 100 ml inculding cost of transportation , all taxes & levies etc. complete in all respect.

Supply of Pippette 20 ml (Glass, class-A, with certificate) inculding cost of transportation , all taxes & levies etc. complete in all respect.

Supply of vernier caliper, digital 0-150mm, inculding cost of transportation , all taxes & levies etc. complete in all respect.

Supply of double wheel concrete trolly (for carriage of material in laboratory), capacity 200 kg, inculding cost of transportation , all taxes & levies etc. complete in all respect.

Supply of Sodium Carbonate inculding cost of transportation , all taxes & levies etc. complete in all respect.

Supply of Sodium hexametaphosphate inculding cost of transportation , all taxes & levies etc. complete in all respect.

Supply of concentrated HCL acid inculding cost of transportation , all taxes & levies etc. complete in all respect.

Supply of NAOH pellets inculding cost of transportation , all taxes & levies etc. complete in all respect.

Supply of Oxalic Acid Pellets inculding cost of transportation , all taxes & levies etc. complete in all respect.

Supply of Phenolphthalein indicator inculding cost of transportation , all taxes & levies etc. complete in all respect.

Supply of Bromothymol blue indicator inculding cost of transportation , all taxes & levies etc. complete in all respect.

Supply of PH indicator inculding cost of transportation , all taxes & levies etc. complete in all respect.

Supply of ethyl alchohol inculding cost of transportation , all taxes & levies etc. complete in all respect

Supply of Filter paper Whatman 42 No. inculding cost of transportation , all taxes & levies etc. complete in all respect.

Supply of Boric Powder inculding cost of transportation , all taxes & levies etc. complete in all respect.

Supply of Soft absorbent cloth of size 75 x 45 cm inculding cost of transportation , all taxes & levies etc. complete in all respect.

Supply of Duster inculding cost of transportation , all taxes & levies etc. complete in all respect.

Supply of hand wash soap 100gm, inculding cost of transportation , all taxes & levies etc. complete in all respect.

Repair, modification & servicing of existing Concrete Mixer inculding cost of replacement of drum , all mechanical & electrical works, transportation , all taxes & levies etc.complete in all respect.

Repair, modification & servicing of existingVibration Machine (concrete lab) inculding cost of all mechanical & electrical works, transportation , all taxes & levies etc. complete in all respect.

Repair, modification & servicing of existing I.S. Sieve shaker For fine aggregate, inculding cost of all mechanical & electrical works, transportation , all taxes & levies etc. complete in all respect.

Repair ,modification & servicing of existing IS. Sieve shaker for coarse aggregate, inculding cost of all mechanical & electrical works,transportation , all taxes & levies etc. complete in all respect.

Repair ,modification & servicing of existing Los angels machine inculding cost of all mechanical & electrical works, transportation , all taxes & levies etc. complete in all respect.

Computer of established make with operating system (pre loaded windows 10 professional) , Processor (8th generation ,intel core i7-8700k(3.7gHz,12MB cache,6 cores)), Mother board ((Chipset-intel Q170), expansion slot (PCle x 1=1No.,PClex16=2 No. )) RAM(DDR4, 8GB(expandable to 32 GB), Storage ( 1TB), Connectivity(Wireless-yes, Network-on board 10/100/1000 GB port), Graphics (Integrated), Ports (USB- 2.0=2no., USB 3.0=4no. VGA, HDMI, Display port), Monitor( 19.5 inch, resolution-1920x1080 certification- TCO 7.0), Mouse(Optical), Keyboard (Standard)

Laser jet printer with facility of printing,scanning, duplexing & networking, ( inclusive all taxes)

Laser jet printer with standard functions ( inclusive all taxes)

AIMIL LIMITED