CUTTING OF GRASS AND REPAIR TO CRACKS IN FLEXIBLE PORTION OF RUNWAY , PAINTING AND CLEANING OF DRAINS IN MANOVOURING AREA IN TECH AREA AT AIR FORCE STATION PATHANKOT

Amount

Cutting of grass, bushes, wild under growth (after cutting the remaining grass should not be more than 75mm from ground level) by using tractor with grass cutting machine and applying cap in cone shape for safety of runway/Taxi track lights including cleaning by blower/removal of shrubs, bushes and grass outside Technical area and deposited complete all as specified and directed by Engineer-in-Charge. Note : 1. Rate of this item included for tractor, tools,plant/grass cutting machine, fuel/oil & driver. 2. The complete area consists of Delta loop, whiskey loop, PTT and runway, No complaint/representation will be acceptable regarding variation in terrain, undulations on ground and presence of any type of small boulders. 3. Air force authorities shall decide which area to be taken up for grass cutting and also the frequency of grass cutting.Contractor will have to abide by these directions. 4. The complete quantity of 50,00,000 Sqm is to be excuted of a uniform pace in every month. Thus, minimum 25% quantity (12,50,000 Sqm) must be excuted in each quarter. If contarctor fails to fulfill this obligation, a penal recovery calculated as under will be charged. Recovery for one quarter = (25 % of total qty- executed qty for that quarter)x 5%x quoted rate in Rs.

Scrapping grasses alongwith PTT, taxi link and runway edges manually and with petrol/diesel/electric operated bush cutter and applying cap in cone shape for safety of Runway/Taxi track lights including cleaning by blower and removal of shrubs, bushes and grass outside Technical area and deposited complete all as specified and directed by Engineer-In-Charge.

Material and labour for cleaning/racking out cracks/joints on flexible portion of runway and making to maximum width upto 50mm and depth 50mm (For cracks above 3 to 5mm wide ) by cutting with cutter machine in flexible pavement and removing all existing loose and foreign materials to a distance exceeding 50 metres but not exceeding 100 metres, cleaning the surface with wire brushes and then cleaning the surfaces with compressed air using compressor, priming the surfaces with primer Dencote Primer 601 and filling with Epoxy tar compound levelled with trowel complete all as specified and directed by Engineer-in-Charge. Make : DENSON/NGI or any equivalent make approved by GE.

Preparation of old treated horizontal concrete or bituminous roads, pavement surfaces exceeding 10cm width or girth with wire brushes etc, and painting lines, dashes, strips, circles and other markings remove all scrap material outside Technical area and applying one coat of thinable/matt finished road marking paint white/orange/yellow/black or any other colour as approved by GE using mechanical pavement marking machine line lazer IV 3900 and 5900 of M/s Graco as approved by GE complete all as specified and as directed by Engr-in-Charge. Make: SN Infratech Pvt. Ltd./ STP / Apcotrak manufactured by Asian paints/ Road marking paint of Berger as approved by GE. Note; (1)Thickness of paint shall be minimum 40micron ( Dry film thickness) for each coat. (2) An exclusive team of adequate number of labourers for painting activity shall be deployed by the contractor as per directions of Engr-in-Charge. (3) The execution of 30% quantity is to be completed in within 60 days after acceptance of contract; failing to meet this execution target by given due date shall incur irreversible penal recovery of Rs. 10000. (4) Next 50% quantity is to be completed within 120 days after acceptance of contract; failing to meet this execution target by given due date shall incur irreversible panel recovery of Rs. 15000. (5) Last 20% quantity is to be completed before completion date of contract given in the acceptance letter.

Excavation/clearance of mud from mansoon drains not exceeding 1.50m wide not exceeding 1.50m in depth and getting out complete including removing of old slabs and refixing the slabs in the same position after removal of Mud, complete all as specified and directed by Engineer-in-Charge.

Removing excavated material not exceeding 50m and deposited where directed by Engr-in-Charge at a level not exceeding 1.50m above starting point, complete all as specified and directed by Engineer-in-Charge.

JCC ENGINEERS PRIVATE LIMITED

M/S SATPAL AND BROTHERS

new hi tech engineers and contractors

M/S MULTI ENGINEERS

M/S P.S CONSTRUCTION CO