CERTAIN B R MAINT WORK INCLUDING, PLUMBING, JOINERY, TILLING, ETC AT JCOS/OR MD ACCN OF OLD SF AND NEW SF AT FATEHGARH CANTT

Amount

Demolition of brick work or stone /boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M & L Brick work using old size sub class B bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1 : 6 complete all as soecified and directed.

M & L Brick work using old size bricks (Except brick) straight or curved on plan exc 6 m mean radius built in cement mortar 1 : 6 complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and directed.

M&L for 50 mm thickness PCC 1:3:6 type C-1 using 20 mm broken stone aggregate in plinth protection including finishing smooth without using extra cement, all as specified and directed.

Dismantling of floor hearth or wall tiling any type including cement mortar bedding complete all as specified and directed.

S&F glazed coloured ceramic tiles of sizes 350x250x7mm/450x350x7mm thick on vertical surface over 10mm thick rendering in CM 1:4 complete all as specified and directed.

S&F Non Skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceedifng 0.11 sqm but not exceeding 0.18 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm screed bed in CM 1:6 complete all as specified and directed.

M & L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps , jambs, pillars, window cills, cooking plateforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Taking down cement plaster of any description built in cement mortar of any description complete all as specified and directed.

M&L 15mm thick cement plastering in cm 1:6 on brick or concrete surfaces fair finished the surfaces even and smooth without using extra cement all as specified and directed

M&L 15mm thick cement plastering in cm 1:4 on brick or concrete surfaces fair finished the surfaces even and smooth without using extra cement all as specified and directed

M&L 5mm thick cement plastering in cm 1:3 on on ceiling surfaces even and smooth without using extra cement complete all as specified and directed.

Taking down chowkats with shutter n.exc 1.50 Sqm each (without taking off shutter for the chowkats ) complete all as specified and directed.

-ditto- all as above but for exc 1.50sqm but n.exc 4Sqm…. Ditto as above……………

Taking down shutter of any description exc 1.00 Sqm but n.exc 2.00 Sqm complete all as specified and directed.

S&F mild steel framed work of angle or any other section (grade 410 - 0 or Fe 310-0) as in door and door frame, gates of angle frame work etc including necessary welding etc complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

M & L for PCC 1 : 3 : 6 type C1 using 20 mm graded stone aggregate as in fixing of hold fast including necessary form work complete all as specifed and directed.

S&F Factory made solid panel pvc door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F 2nd class hard wood 35 mm thick factory made plain famed, paneled shutter (Two panels) with lock rail and panel of 12mm BWP commercial ply or 12mm veneered particle board with commercial veneering on bath pans. The size of rail and style as per IS –1003 (Pt-I) kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35mm thick Factory made glazed & skelton shutter of 2nd class H.W open rebated and prepare to receive the glass, gauge etc (with sash bar) edges of framing plain chamfered or rounded fitted with cut and mitred beeds for securing glass gauge etc size of members of shutters as specified in SSR Part-I section 8 clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks all as specified.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks all as specified

S&F Alum anodized barel tower bolt of extruded sec 150mm long complete all as specified and directed.

S&F aluminium alloy handle cast type anodized of size 150mm long complete all as specified and directed.

S&F but hinges med weight cold rolled mild steel 100mm size complete all as specified and directed.

S&F 250 mm long Aluminium alloy. Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S & F 300 mm ordinary rat rail made of MS rod pattern spring including roller and roller plate complete all as specified and directed.

S & F in repair curtain rod PVC coated anodised aluminium alloy rod 25 mm bore with fixing fancy type brackets, stops, rollers, side dooms etc complete all as specified and directed.

M & L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint over a coat of wood primer complete all as specified and directed.

M & L for preparation of new or previously untreated surfaces of steel of any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames glazed with putty of fixed with beads complete all as specified and directed.

S & F 3 mm thick sheet glass, ordinary quality and glazing with mitred beads or oil putty including glazing clips in square not exc 0.50 sqm in each pane complete all as specified and directed.

S & F 3 mm thick figured glass, pin head type and glazing with mitred beads or oil putty including glazing clips in square not exc 0.50 sqm in each pane complete all as specified and directed.

S&F Vireous china water closet squatting pan “Orrisa Pattern” white of size 580x440mm with internal foot rest with `P’ or `S’ trap for 100mm pipe (excluding flush pipe and flushing cistern) all as spd but fixed in repair. complete all as specified and directed.

S&F in repair for PVC low level flushing cistern 10ltr capacity, with cyphonic, action PVC float valve, brackets and 32mm bore PVC flush pipe etc incl PVC connection 450mm long as spd and fixed in repair complete all as specified and directed.

S&F in repair 15mm dia stop/angle valve standard of PTMT any colour screwed,for iron pipe and fixed.(Minimum weight 15mm - 90gms complete all as specified and directed

S&F in repair 15mm dia Bib tap standard of PTMT any colour screwed,for iron pipe and fixed.(Minimum weight 15mm - 90gms complete all as specified and directed.

S&F in repair 15mm dia Pillar tap standard of PTMT any colour high pressure screwed,for iron pipe and fixed.(Minimum weight 15mm - 90gms complete all as specified and directed.

S&F in repair 20mm dia Ball valves standard of PTMT any colour high pressure with epoxy coated aluminium rod & high density plastic ball screwed,for iron pipe and fixed.(Minimum weight 20mm - 210gms complete all as specified and directed.

S & F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F for rotional moulded polyethylene water storage tank vertical with closed top of 500ltrs capacity and fixed in position all as specified in SSR Part-I including disconnecting existing tanks and float vlave 20mm (PTMT) complete all as specified and directed.

S & F in repair Vitreous China Wash hand basin white flat back of size 550 x 400 mm including brackets, waste coupling 32mm dia and waste pipe complete all as specified and directed.

M & L three coat of white wash on new plastered wall surfaces including preparation complete all as specified and directed.

M & L Two coats of Oil bound distemper on new plastered wall suerfaces over a coat of chalk whiting with 1 mm wall putty including preparation complete all as specified and directed.

M & L for two coats of Cement based paint over a coat of alkali resistant primer on new plastered wall surfaces including preparation complete all as specified and directed.

M & L three coat of white wash on new plastered Ceiling surfaces including preparation complete all as specified and directed.

S&F in repair for Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars , dovetailed or welded.

S&F in repair for Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with out glazing bars , dovetailed or welded.

S&F in repair for Steel ventilators, fixed type, with glazing bars complete all as specifed and directed.

S & F MS work as in widnw guard bars, plain, let in and fixed independently in wooden frames etc, and similar articles conforming to Fe 290 Gde E 165 complete all as specified and directed.

Taking up or down of 15 mm dia steel tubing and connections complete all as specifed and directed.

Taking up or down of 20 mm dia steel tubing and connections complete all as specifed and directed.

M&L for 15 mm dia GI medium grade tubing incl all fittings laid in floors /fixed on walls complete all as specifed and directed.

M&L for 20 mm dia GI medium grade tubing incl all fittings laid in floors /fixed on walls complete all as specifed and directed.

S&F for gun metal gate valve 20mm dia, globe with iron wheel head, screwed both ends for iron pipe and fixed complete all as specifed and directed.

S & F PVC ( SWR pipe ) 110 mm bore rain water pipe including removing old pipe and making good the disturbed surfaces in CM 1:4 or PCC 1:2:4 complete all as specified and directed.

M/S S P CONSTRUCTION

Shree Gopal Engineers & Contractor

MAYA CONSTRUCTION

M/s Moti Babu Agarwal

m/s udit constructions

M/S Arvind Electricals