CONSTRUCTION OF SECURITY WALL WITH ANGLE IRON AND CONCERTINA COIL ON TOP APPROX 1600 MTR LENGTH AND 3.0 MTR HEIGHT ALONGWITH MAIN GATE APPROX 3.63 MTR LENGTH AND 2.45 MTR HEIGHT AT KESRISINGPUR

Amount

Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m complete all as specified and as directed by Engineer-in-Charge.

Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift exceeding 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m complete all as specified and as directed by Engineer-in-Charge.

Material and labour for PCC 1:4:8 type D2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.

Material and labour for Mild steel TMT bars of 6mm to 8mm dia, cut to length bent to Shape required, incl cranking, bending spirally for hooping for columns, hookng ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for Mild steel TMT bars of 10mm dia and over, cut to length bent to Shape required incl cranking, bending spirally for hooping for columns, tie bars/dowel bars in longitudinal joints/transverse joints etc, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for Mild steel TMT bars of 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length bent to Shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Use & waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter with rough finished flat surfaces of concrete, complete all as specified and as directed.

Use & waste of formwork to sides of square/rectangular or polygonal pillars, posts, struts, piers, columns with fair finished surfaces of concrete, complete all as specified and as directed.

Use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. with fair finished flat surfaces of concrete, complete all as specified ans as directed.

Material and labour for RCC M-25 (Design Mix) using 20mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

Material and labour for RCC M-25 (Design Mix) using 20mm graded crushed stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and as directed.

Material and labour for RCC M-25 (Design Mix) using 20mm graded crushed stone aggregate as in beams, cantilevers, bressumers, lintels over 1.5 metre clear span and the like complete all as specified and as directed.

Material and labour for Mild steel work angle iron and flat iron, swan neck, drilled and countersunk for balusters, running bars, for doors, balusters nosing to steps including embeding in concrete and screwing etc. wind ties for roof securing bolts fencing posts & flat iron, post and struts in fencing including cutting tops, bending to shape, drilling holes, notching for wire etc., flat iron fillets (for securing wire mesh etc.) Including all necessary drilling, bolting or riveting etc., confirming to Fe-290 Gde E -165 complete all as specified and as directed and shown on drawings.

Material and labour for brick work with Fly Ash bricks (non modular bricks), straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6) complete all as specified and as directed.

Material and labour for 15 mm thick cement plaster in cement mortar 1:4 on fair face of brick or concrete surfaces, plastered surfaces finished smooth and even without using extra cement complete all as specified and directed.

Material and labour for 15 mm thick cement plaster in cement mortar 1:4 on other than fair faces of brick work or concrete surfaces, plastered surfaces finished smooth and even without using extra cement complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Manufacturer's Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed by Engineer-in-charge.

Supply and fixing Mild steel screw bolts, length of bolt exceeding 15 cm but not exceeding 22.5 cm having dia of neck 16 to 20 mm, (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and two hexagonal or square nut, complete all as specified and as directed.

Material and labour for 25 mm thick pre-formed filler for crumple joints complete all as specified and as directed.

Supply and fixing 0.56 mm thick Aluminium sheeting for covering crumple joint complete all as specified and as directed.

Supply and fixing Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil complete all as specified and as directed.

Supply only galvanised concertina coil with punched tape 600mm dia having 50 rounds per 6 meter length, with wire diametre 2.5mm dia and blade size 15mmx12mmx0.5mm, spacing of blade 26mm, (concertina coil minimum weight per bundle of 6 m length covering 50 rounds shall not be less than 8.5 Kgs) concertina coil shall be fixed over wall complete all as specified and as directed. Note:- The weight of concertina coil shall be ascertained by BOO as directed by GE and payment shall be made according to the BOO duly signed by GE.

Fixing only galvanised concertina coil over the wall, any dia and shape with standard specifications as suggested, including any type of standards, rail, bracket, fixing clips, including all type of fixing arrangements complete all as specified and as directed

Material and labour for preparation of new steel & iron surfaces of any description, exceeding 10 cm in width or girth not otherwise described, and applying Two coats of synthetic enamel paint over & including a coat of red oxide primer complete all as specified and as directed

Material and labour for preparation of new surfaces of any description, exceeding 10 cm in width or girth not otherwise described, and applying Two coats of black bituminous paint over & including a coat of red oxide primer complete all as specified and as directed

Supply & fixing 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints for drain or rain water laid in trenches /under floor complete all as specified and as directed.

Forming square grooves in plaster not exceeding 12mm deep and not exceeding 15mm on face complete all as specified and as directed.

Material and labour for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars (square/hollow); barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

Material and labour for for polished, 18-20mm thick machine cut granite (of any type) work in jambs, pillars and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, including cutting and polishing, over and including rendering 10 mm thick in cement mortar 1:4 complete all as specified and as directed.

M/S BUDHRAM BISHNOI

BHULLARCONSTRUCTIONS

A S CONSTRUCTION COMPANY

SHREE GURU NANAK CONSTRUCTION COMPANY

GAURI SHANKAR AGGARWAL

Aggarwal brothers and company

M/S GODARA CONSTRUCTION CO.

Pawansut Infra Projects Private Limited

M/s Luxmi Constructions

J and K constructions company