Improvement/Up-gradation of Rajinder Park/Children Park at Canal Head, Jammu (Phase-1) Revised at S.No 10 (Providing and Fitting of Water Coolers with Filter Plant and Prefabricated Shed).

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:

CEMENT CONCRETE (CAST-IN-SITU) Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for: 5.9.1 Foundations, footings, bases of columns etc. for mass concrete.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Providing and fixing of panels for wall and roof. The roof shall be provided 0.05mm • Colour coating profile sheet precoated precoloured sheets in roofing. The walls shall be provided 50mm thick puff insulated panel make Sintex or Equivalent 0.50m thick precoated precoloured sheets. The Vertical columns of RHS size 122 mm x 31mx3.60 mm conforming to IS 5223: with MS base plate of size 250 mm x250 mm x8 mm and top plate of size 250 mm x250 mm x8 mm shall be erected @ 3.0 mm centre to centre all top and base plate shall be pre drilled with 4 Nos 18 mm d,a role for providing 6 mm d1a, 450 mm long bolt each at top and bottom. The roof sheet are laid over a frame work of trusses and purlins and rafters fixed using suitable fasterers. A 0.50mm precoated/ precoloured steel sheets ridge cover of 0.40mm from the eves wall and 0.30mm from the gable wall. The wall shall be made in sandwich panel systsm using 2No's of precoated precoloured sheets of 0.50mm thick fitted fitted with 50mm thick puff with bulk density of 40kg/cum. The puff panels shall be make Sintex/Llyod/Jindal or equivalent contineous panel system. The panels shall be inserted one by one in "U" shaped ground track of size 52.5x35x1.25mm thick made from G.I sheet/sheet coil. The bottom track shall be fixed to the concrete platform level by suitable fasteners screwed on the PVc expandable screw cap. The top of the walls would be concealed with "U" shaped top track of size52.5x35x1.25mm thick made from G.I sheet/sheet coil. The roof shall be 1:4 approximately as per seismic Zone -IV . The walls height shall be 3Mts at eves and 3.36 Mts at centre gable. Structural steel work rivted and bolted in built up section trusses/ tubular section and frame work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.as per directions of EIC Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up heavy standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. Size of tile 600x600 mm along with scredding below it. Including necessary Ceiling,electrification and allied works such as construction of independent staging as per the directions of EIC(Complete Job) ( Ceiling Height= 9'-0'' )

Supplying, installation, testing and commissioning of 150/150 Liters of water Cooler having full stainless steel body, cooling capacity 150 ltr/hour and storage capacity 150 ltr alongwith PVC connecting pipes as required and Electric fittings as required as per the direction of Engineer-in-Charge (Complete Job)

Providing water purifier UV type of 3 rods of capacity 25LPH including its purifying rods ,UV adapter, Diaphram booster pump of RF-75GPD connecting pipes etc as required for making it in operation and Electric fittings as required as per the direction of Engineer-in-Charge (Complete Job)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 10.25.2 In gratings, frames, guard bar, ladder , railings, brackets, gates and similar works

PE-AL-PE COMPOSITE PRESSURE PIPES AND FITTINGS Providing and fixing Polyethylene- Aluminum- Polyethylene (PE-ALPE) Composite Pressure Pipes conforming to IS: 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80ºC, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows, tees, reducers, couplers and connectors etc.This includes testing of joints complete as per direction of the Engineer-in-charge: External work including trenching and refilling etc. complete 191.3.2 1620 (20mm OD) pipe 2532 (32mm OD) pipe