Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹4.2 LAdmitted-Finance | -21.16% | ₹4.2 L | L1 | Admitted-Finance |
| 2 | L2₹4.5 LAdmitted-Finance | -15.68% | ₹4.5 L | L2 | Admitted-Finance |
| 3 | L3₹5.0 LAdmitted-Finance | -5.50% | ₹5.0 L | L3 | Admitted-Finance |
| 4 | L4₹5.3 LAdmitted-Finance | +0.00% | ₹5.3 L | L4 | Admitted-Finance |
| 5 | L5₹5.6 LAdmitted-Finance | +5.00% | ₹5.6 L | L5 | Admitted-Finance |
Tender Value
₹5.3 L
EMD Value
₹5.3 L
Closing Date
6 Apr 2026, 6:00 pmClosed
EXEUCTIVE OFFICER
NAGAR PALIKA ABUROAD
Construction of Tube well For MRF Center at Near ROB Gandhinagar And Near STP Santpur
2026_DLB_548078_1
NIRMAN/5547-06
Open Tender
Civil Works
ABUROAD
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
EO, MDRISL
₹5.3 L
Yes
17 Apr 2026
25 Mar 2026
7 Apr 2026
25 Mar 2026
6 Apr 2026
25 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Construction of Tube-well upto 100 Meter depth and above in all type of rocks by DTH system and over burden to accommodate casing pipe of following sizes in all types of soils and over burden including lowering of casing pipes but excluding cost of casing pipes as per IS : 2800 (Part I & II) 1979 specifications. The work would be completed after obtaining sand free water. The tube well should have a throughout bore as per nominal dia of casing pipe: 20.1.3 150 mm dia Nominal bore | |||||
| 2Supply of ERW M.S. black casing pipe ISI marked (IS: 4270/1992) of grade Fe410 of following nominal bore sizes at site of work.20.4.3 150 mm dia | |||||
| 320.8 Supply and fixing of M.S. clamp set of 50 ×6mm flat iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set. | |||||
| 420.9 Installation of submersible motor pump set in tube-well/open well complete (labour charges only) including transportation of tripod,chain pulley block & any other material required for lowering purpose. | |||||
| 5Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work : 34.12.6 50 mm dia. nominal bore | |||||
| 6Providing & Fixing of HDPE pipe Confirming to IS:4984:2021 for water supply suitable for submersible & jet pump with required fittings ie socket, elbows, tee etc. complete in all respect. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .70.4.1.3 63 mm OD 6 kg / cm2 | |||||
| 7Providing & Laying of Polypropylene rope Confirming to IS:5175 for submersible pump of following sizes. complete in all respect. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . 70.3.2 16mm (suitable above 50mm & up to 75mm OD pipe) | |||||
| 8P/Laying ISI marked P.V.C. insulated submersible cable confirming to(IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, existing pipe / open trench / Cable tray / on surface including making connection etc. as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 53.7.4 6.0 Sq.mm 3 core flat / Round | |||||
| 970.6 SITC of Radial / mixed flow ISI marked water and anti-corrosive liquid filled submersible motor pump sets suitable for 100/150mm dia borewell. The size of adopter fixed on top of the motor should exceed the top of coupler , for safegaurd the coupler. The construction material of motor and pump should match IS: 8034 : 2018 and IS: 9283 guideline. The radial flow pumpset should operate at 5 star energy efficiency level of BEE and mixed flow pump set should operate at 3 star energy level of BEE, accompained by valid BEE certificate. Motor should be IE2 class as per IEC 60034-2-1: 2007, IEC 60034-30: 2008, & IS12615:2011 with required accessories including making connection suitable for Bore well. The job includes labour part of lowering of riser pipe G.I./ H.D.P.E. with rope, cables & pump, installation of complete fitting and accessories, jointing of electrical cables up to Starter. All labour for testing of submersible pumps set and supply of water to water mains, complete in all respect. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test certificate before execution. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . 70.6.1.2 1.5HP, 1-Ø, (11 - 94)Mtr, (40 - 10) LPM | |||||
| 1070.13 SITC of Contactor OEM Fabricated DOL/Star-Delta Starter panel with switchgear selection as per Type-2 Cordinatiom Chart and made out from 1.6 mm thick powder coated CRCA sheet, enclosure comprising of over load protection relay, short circuit & single phasing protection, Illuminated ON / OFF push buttons, ammeter, voltmeter, indicating lamps etc. suitable for following rating motors complete in all respect. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . 70.13.1 For single phase Submersible / Monoblock pump 70.13.1.10.5 HP to 1.5 HP (DOL starter) | |||||
stage.html
html • 0.03 MB
technical_977242.pdf
techsummary_977242.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.48 MB
BOQ_977242.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid