Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.6 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹35.7 L+₹1.1 L (3.17%)Rejected-Finance | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹37.8 L+₹3.1 L (9.02%)Rejected-Finance | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹38.7 L+₹4.1 L (11.7%)Rejected-Finance | L4 | Rejected-Finance Not Lowest |
| Sl No | Description | Qty | Unit | G S CONSTRUCTIONS L1 | RUCHIKA CONSTRUCTIONS L2 | Ramdev Enterprises L3 | P.K ENTERPRISES L4 |
|---|---|---|---|---|---|---|---|
| 1.00 | M&L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) in mass concrete and foundations, filling and mass concreting | 1.19 | Cum | 2,345 ₹2,790.55 Lowest | 3,000 ₹3,570 | 3,500 ₹4,165 | 4,000 ₹4,760 |
| 2.00 | M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finish surface of concrete flat complete all as specified and as directed by Engineer-in-Charge. | 25.99 | Sqm | 234 ₹6,081.66 | 150 ₹3,898.5 Lowest | 300 ₹7,797 | 250 ₹6,497.5 |
| 3.00 | M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge. | 558.62 | Kg | 76 ₹42,455.12 Lowest | 86 ₹48,041.32 | 88 ₹49,158.56 | 80 ₹44,689.6 |
| 4.00 | All as per item No 3 above here-in-before but 5mm dia and over upto and including 10mm dia as in stirrups, spaces & binders complete all as specified and as directed by Engineer-in-Charge. | 94.07 | Kg | 92 ₹8,654.44 | 86 ₹8,090.02 | 88 ₹8,278.16 | 80 ₹7,525.6 Lowest |
| 5.00 | M&L for reinforced cement concrete (nominal mix) 1:2:4 type B-1 (using 20mm graded stone aggregrate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, pillers etc complete all as specified and as directed by Engineer-in-Charge.
Note : Reinforcement shall be measured and paid seperately under respective item of BoQ. | 6.04 | Cum | 5,400 ₹32,616 | 5,500 ₹33,220 | 4,500 ₹27,180 Lowest | 5,000 ₹30,200 |
| 6.00 | S&F Fe 410 -W (GdeE- 250) qualityA mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specifed. | 1,768.06 | Kg | 90 ₹1,59,125.4 Lowest | 95 ₹1,67,965.7 | 120 ₹2,12,167.2 | 105 ₹1,85,646.3 |
| 7.00 | S&F Mild steel screw bolts (machine made) diameter of neck 16 to 20 mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc. 15cm and n exc 22.5cm long complete all as specified. | 73.14 | Kg | 99 ₹7,240.86 Lowest | 110 ₹8,045.4 | 125 ₹9,142.5 | 105 ₹7,679.7 |
| 8.00 | S&F structural steel work as in compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. conforming to grade Fe-410W(GdeE-250) quality B complete all as specified and as directed by Engr-in-charge. | 7,587.36 | Kg | 93 ₹7,05,624.48 | 85 ₹6,44,925.6 Lowest | 92 ₹6,98,037.12 | 105 ₹7,96,672.8 |
| 9.00 | S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to grade Fe-410W(GdeE-250) qualityB complete all as specified and as directed by Engr-in-charge. | 17,849.19 | Kg | 93 ₹16,59,974.67 Lowest | 95 ₹16,95,673.05 | 93 ₹16,59,974.67 Lowest | 105 ₹18,74,164.95 |
| 10.00 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified | 282.15 | Sqm | 599 ₹1,69,007.85 Lowest | 680 ₹1,91,862 | 700 ₹1,97,505 | 700 ₹1,97,505 |
Tender Value
₹43.7 L
EMD Value
₹87,360
Closing Date
3 Oct 2025, 6:00 pmClosed
GARRISON ENGINEER ABOHAR
GARRISON ENGINEER ABOHAR, pin 152116, pb
PROVN OF COVERED SHED OVER ENTRANCE GATE AT TCP-II OF FAZILKA MIL STN.
2025_MES_730087_1
TOKEN NO GE ABH-28/2025-26
Open Tender
Civil Works
Item Rate
180 days
FAZILKA MIL STN
As per NIT
7 documents required · 7 mandatory
₹500
GE ABOHAR
₹87,360
1 Dec 2025
10 Sept 2025
6 Oct 2025
10 Sept 2025
3 Oct 2025
19 Sept 2025
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .