Interior fit-out works for RailTel office at Office Block-I, Plate-A, 5th Floor, East Kidwai Nagar, New Delhi

ABSTRACT OF COST

Proposed Refurbishment of 5th Floors for Railtel office at Office Block-1, East Kidwai Nagar,(New Delhi)

Sub Head No. Description DSR NDSR/MR Total

CHAPTER-1 CIVIL CONSTRUCTION

SH.2 Reinforced Cement Concrete Work ₹ 2,911.00 ₹ - ₹ 2,911.00

SH.10 Repairs To Building ₹ 33,548.00 ₹ - ₹ 33,548.00

SH.11 Dismantling And Demolishing ₹ 20,637.00 ₹ - ₹ 20,637.00

SH.14 New Technologies And Materials ₹ 53,424.00 ₹ - ₹ 53,424.00

Modified cost after using correction factor on DSR 2023 on account of GST @

0.973 as per office memorandum of TAS Unit, CPWD, Nirman Bhawan, New

Delhi issued by e-file no 9158477 vide letter no. 158/SE(TAS)/GST/2024/02-E ₹ 43,11,595.35 ₹ - ₹ 43,11,595.35

SH.15 Non Schedule Items- Based On Delhi Schedule Of Rates ₹ 10,88,461.00 ₹ 10,88,461.00

SH.16 Non Schedule Items- Based On Market Rates ₹ 1,06,91,394.12 ₹ 1,06,91,394.12

SH-17 Modular Furniture, Chair Work & Loose Furniture Work ₹ 1,22,87,891.41 ₹ 1,22,87,891.41

SH-23 LIGHTING AUTOMATION SYSTEM ₹ - ₹ 4,53,666.00 ₹ 4,53,666.00

SH-25 NETWORKING ACTIVE WORK ₹ - ₹ 70,42,014.00 ₹ 70,42,014.00

SH-30 PNEUMATIC GAS SUPPRESSION (TUBULAR) ₹ - ₹ 3,10,011.00 ₹ 3,10,011.00

Digitally signed by AMIT

ABSTRACT OF COST

Proposed Refurbishment of 5th Floors for Railtel office at Office Block-1, East Kidwai Nagar,(New Delhi)

Sub Head No. Description DSR NDSR/MR Total

CHAPTER-1 CIVIL CONSTRUCTION

SH.2 Reinforced Cement Concrete Work ₹ 2,911.00 ₹ - ₹ 2,911.00

SH.10 Repairs To Building ₹ 33,548.00 ₹ - ₹ 33,548.00

SH.11 Dismantling And Demolishing ₹ 20,637.00 ₹ - ₹ 20,637.00

SH.14 New Technologies And Materials ₹ 53,424.00 ₹ - ₹ 53,424.00

Modified cost after using correction factor on DSR 2023 on account of GST @

0.973 as per office memorandum of TAS Unit, CPWD, Nirman Bhawan, New

Delhi issued by e-file no 9158477 vide letter no. 158/SE(TAS)/GST/2024/02-E ₹ 43,11,595.35 ₹ - ₹ 43,11,595.35

SH.15 Non Schedule Items- Based On Delhi Schedule Of Rates ₹ 10,88,461.00 ₹ 10,88,461.00

SH.16 Non Schedule Items- Based On Market Rates ₹ 1,06,91,394.12 ₹ 1,06,91,394.12

SH-17 Modular Furniture, Chair Work & Loose Furniture Work ₹ 1,22,87,891.41 ₹ 1,22,87,891.41

SH-23 LIGHTING AUTOMATION SYSTEM ₹ - ₹ 4,53,666.00 ₹ 4,53,666.00

SH-25 NETWORKING ACTIVE WORK ₹ - ₹ 70,42,014.00 ₹ 70,42,014.00

SH-30 PNEUMATIC GAS SUPPRESSION (TUBULAR) ₹ - ₹ 3,10,011.00 ₹ 3,10,011.00

Digitally signed by AMIT

S.No Item Descriptions Qty Rate Amount Location

Supplying of Rectangular workstation of size 1200X 600x 750 with KBPT , CPU Trolley .Providing DESK based modular workstation with worktop thickness 25mm

System ht - 750 mm .Understructure - The slanted legs with perforated metal modesty in between are connected to the understructure with the help of PDC

Connectors to provide a stable and sturdy base for the worktops. Modesty panel shall be of Metal 1.2 mm thick CRCA. Wire Management : Metal powder coated

1 power box with wire raiser is given to pull wires from the floor junction box upto the power box fixed under neath the worktop. Aluminium access flaps on worktop 46 29868 1373933 Workstation Area

above power box cut out for accessing switches.Worktop mounted metal modesty made from 0.8 mm thk CRCA (IS: 513) is provided.Worksurface - out of 25 mm

thk prelam particle board with flat pvc lipping edge banding of size 1200 mm w x 600 mm d. Pedestals - Pedestal flat metal front, full ht free standing central

locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. . OEM shall be ISO-9001:2015, ISO-14001:2015, ISO-45001:2018, BIFMA and AIOTA certified.

Supplying of workstation of size 1500X 1500x600x 750 with KBPT , CPU Trolley .Providing DESK based modular workstation with worktop thickness 25mm System ht -

750 mm .Understructure - The slanted legs with perforated metal modesty in between are connected to the understructure with the help of PDC Connectors to

provide a stable and sturdy base for the worktops. Modesty panel shall be of Metal 1.2 mm thick CRCA. Wire Management : Metal powder coated power box with

2 wire raiser is given to pull wires from the floor junction box upto the power box fixed under neath the worktop. Aluminium access flaps on worktop above power box 22 44193 972256 Workstation Area

cut out for accessing switches.Worktop mounted metal modesty made from 0.8 mm thk CRCA (IS: 513) is provided.Worksurface - out of 25 mm thk prelam particle

board with flat pvc lipping edge banding of size 1500 mm w x 1500 mm d. Pedestals - Nova pedestal flat metal front, full ht free standing central locking of size 390

mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. . OEM shall be ISO-9001:2015, ISO-14001:2015, ISO-45001:2018, BIFMA and AIOTA certified.

The cushioned seat and back assembly consists of seat base moulded in glass filled Poly-amide, moulded polyurethane foam and upholstered with high stretch

knitted polyester fabric. The back size shall be 45.5cm W x 53.0cm H. The HR polyurethane foam used in seat and back cushion is moulded in density 45kg per m3.

The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi dimensional movement possibility just with a

simple lean on the sides or back, without need for complex manual adjusments. The cantilevered seat offers impact cushioning while seating and synchronises with

the back movement during posture changes. The ‘S: shaped spines moulded in high strength glass filled Polyamide and the spine connector moulded in glass filled

3 68 13298 904297 Workstation Area

Polyamide form the back spine structure involved in multi dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt limiter

feature which is inbuilt in saet base and the tension is user weight dependent. The adjustable armrests assembly consists of armrest housing sliding over the armrest

structure, both moulded in glass filled Polyamide. The pneumatic height adjustment shall have a stroke of 9.2cm.The pedestal is injection moulded in glass filled

Polyamide and fitted with 5 nos. twin wheel castors. The pedestal is 66cm pitch centre diameter and 76cm with castors. The overall dimensions of the chair shall be

76cmx 76cm x(99.5-108.8cm). The seat height shall be (44.5-53.8cm).

Providingin place of main table with overall size of table 1650 x 1650 x 750mm. The main table shall be of size 1650 x 750 x 750mm. The side unit shall be 900 x 500 x

750mm. The table is made of 25 mm thick MDF – one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. Soft

closing access flap within-build power box are provided on work surface for wire management. The ERU top is made of 25 mm thick MDF one side pre-laminate

board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The modesty panel is made of 25 mm thick MDF one side pre-laminate board

5 confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The understructure is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and 8 70418 563346 JGM Cabin

approved shade edge banded with matching 2 mm thick PVC lipping. The pedestal is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and

approved shade edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25 mm thick MDF one side pre-laminate board with 0.4 mm PVC

membrane pressed on to top pedestal construction is BOX-BOX-FILE type which uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is

325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security.

Digitally signed by AMIT

Providing, supplying and placing of High Back Chair with Headrest . SEAT ASSEMBLY: The seat is made up of 1.5±0.1 cm thick hot-pressed plywood upholstered with

fabric and moulded polyurethane foam.

SEAT SIZE: 51.8cm (W) x 49.7cm (D)

BACK ASSEMBLY: The Back is injection moulded in glass filled Polypropylene which is 2 upholstered with Mesh fabric. The back consist of adjustable Lumbar support

made of injection moulded Polypropylene having an adjustment of 5.0 10.1 cm.

BACK SIZE: 47.9 cm(W) x 66.9 cm (H)

HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45+/-2 kg/m and hardness 14 ± 2 kgf as per IS:7888 for 25%

ARMRESTS (ADJUSTABLE):The height adjustable armrest is made of Polypropylene and can be adjusted to 6.010.1cm height it also has swivel and To and Fro

adjustment with moulded PU armtop

ACTIVE BIO-SYNCHRO MECHANISM: The adjustable tilting mechanism is designed with the following features

360° revolving type

Front-pivot for tilt with feet resting on ground & continuous lumber support ensuring more comfort

Till tension adjustment can be operated in seating position

5 position Tilt limiter giving option of variable sit angle to the chair

Seat/back tilting ratio of 1:2

The mechanism housing is made up of HPDC Aluminium & black powder coated (DFT 40 to 60 micron)

PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment with an adjustment stroke of 10.0±0.3cm.

PEDESTAL ASSEMBLY: The pedestal is injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal pitch-center dia is

166.1±0.5 cm.(76.1 ± 1.0 cm. with castors).

TWIN WHEEL CASTORS: The twin wheel castors are Injection moulded in black Polyamide having 6.01 0.1cm wheel Diameter.

WIDTH (W) - 76.0cm

DEPTH (D) - 76.0cm

HEIGHT (H) - 95.5 cm- 105.5cm

SEAT HEIGHT - 43.5 - 54.0cm.HEADREST The Headrest sub-assembly is made up of injection moulded glass filed Polypropylene which is upholstered with moulded HR

polyurethane loam and fabric has an adjustment of 3.00.1cm & it is assembled over GRETA 20F The complete headrest assembly is retro fic to the main chair.

Providing, supplying and placing of Mid Back Chair. SEAT ASSEMBLY: The seat is made up of 1.5±0.1 cm thick hot-pressed plywood upholstered with fabric and

moulded polyurethane foam.

SEAT SIZE: 51.8cm (W) x 49.7cm (D)

BACK ASSEMBLY: The Back is injection moulded in glass filled Polypropylene which is 2 upholstered with Mesh fabric. The back consist of adjustable Lumbar support

made of injection moulded Polypropylene having an adjustment of 5.0 10.1 cm.

BACK SIZE: 47.9 cm(W) x 66.9 cm (H)

HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45+/-2 kg/m and hardness 14 ± 2 kgf as per IS:7888 for 25%

ARMRESTS (ADJUSTABLE):The height adjustable armrest is made of Polypropylene and can be adjusted to 6.010.1cm height it also has swivel and To and Fro

adjustment with moulded PU armtop

ACTIVE BIO-SYNCHRO MECHANISM: The adjustable tilting mechanism is designed with the following features

360° revolving type

Front-pivot for tilt with feet resting on ground & continuous lumber support ensuring more comfort

Till tension adjustment can be operated in seating position

5 position Tilt limiter giving option of variable sit angle to the chair

Seat/back tilting ratio of 1:2

The mechanism housing is made up of HPDC Aluminium & black powder coated (DFT 40 to 60 micron)

PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment with an adjustment stroke of 10.0±0.3cm.

PEDESTAL ASSEMBLY: The pedestal is injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal pitch-center dia is

166.1±0.5 cm.(76.1 ± 1.0 cm. with castors).

TWIN WHEEL CASTORS: The twin wheel castors are Injection moulded in black Polyamide having 6.01 0.1cm wheel Diameter.

WIDTH (W) - 76.0cm

DEPTH (D) - 76.0cm

HEIGHT (H) - 95.5 cm- 105.5cm

SEAT HEIGHT - 43.5 - 54.0cm

Digitally signed by AMIT

Providingin place of main table with overall size of table 2100 x 2250 x 750mm. The main table shall be of size 2100 x 1050 x 750mm. The side unit shall be 1200 x 500 x

750mm. The table is made of 25 mm thick MDF – one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. Soft

closing access flap within-build power box are provided on work surface for wire management. The ERU top is made of 25 mm thick MDF one side pre-laminate

board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The modesty panel is made of 25 mm thick MDF one side pre-laminate board

8 confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The understructure is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and 14 108741 1522373 ED Cabin

approved shade edge banded with matching 2 mm thick PVC lipping. The pedestal is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and

approved shade edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25 mm thick MDF one side pre-laminate board with 0.4 mm PVC

membrane pressed on to top pedestal construction is BOX-BOX-FILE type which uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is

325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security.

The Back Unit shall be of dimensions 1800 x 500 x 1150mm. It shall be made of 25mm thick MDF – one side pre-laminate board confirming to IS-14587:1998 with 0.4

mm PVC membrane pressed on to top. The Slide door unit is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded

with matching 2 mm thick PVC lipping. Shutters have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Storage is provided with lock

Providing, supplying and placing of High Back Chair. SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5

±0.1cm. thick hot-pressed plywood measured and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with

contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area.

The chair seat & back size are

HIGH BACK SIZE 51.5 cm. (W) x 82.0 cm. (H)

SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D)

HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25%

ARMRESTS : The adjustable armrest is designed with the following features

· Up-Down adjustment– 6 steps (7.2 ± 0.5cm range)

· Armrest top is mounted on Armrest structure made of glass filled Nylon.

· Armrest Top is PU moulded over glass filled Nylon insert.

CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features:

10 · 360° revolving type. 14 11213 156975 ED Cabin

· 3 position locking with anti shock mechanism.

· Tilt tension adjustment

PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 9.5 ± 0.3 cm

PEDESTAL ASSEMBLY : The pedestal is injection moulded in black glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center

dia. (76.1 ±1.0cm with castors).

TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon.

WIDTH (W): 76.1 CM.

DEPTH (D): 76.1 CM.

HEIGHT (H): 113.5-123.5 CM.

SEAT HEIGHT (SH): 46.0-56.0 CM.

Digitally signed by AMIT

Providing, supplying and placing of Mid Back Chair. SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5

±0.1cm. thick hot-pressed plywood measured and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with

contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area.

The chair seat & back size are

FULL BACK SIZE 51.5 cm. (W) x 69.0 cm. (H)

SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D)

HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25%

ARMRESTS : The adjustable armrest is designed with the following features

· Up-Down adjustment– 6 steps (7.2 ± 0.5cm range)

· Armrest top is mounted on Armrest structure made of glass filled Nylon.

· Armrest Top is PU moulded over glass filled Nylon insert.

CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features:

11 · 360° revolving type. 42 10847 455578 ED Cabin

· 3 position locking with anti shock mechanism.

· Tilt tension adjustment

PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 9.5 ± 0.3 cm

PEDESTAL ASSEMBLY : The pedestal is injection moulded in black glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center

dia. (76.1 ±1.0cm with castors).

TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon.

WIDTH (W): 76.1 CM.

DEPTH (D): 76.1 CM.

HEIGHT (H): 101.5-111.5 CM.

SEAT HEIGHT (SH): 46.0-56.0 CM.

Dimensions W x H x D (cm)- 127.5 x 83.5 x 80

Finish Color - Crush Brown

Seat Height (cm) - 46.5

Upholstery Material - Synthetic Leather

Warranty - 1 Year Warranty 14 21787 305018 ED Cabin Sofa

Primary Material - Leatherette

Aesthetically pleasing, mid-back designer backrest with tufts and clean stitching. • Rounded armrests with soft foam seating provide ergonomic comfort. • Easy-to-

clean synthetic leather or fabric for the cool touch and feel.

Providing and placing in position of main table with overall size of table 2350 x 2350 x 750mm. The main table shall be of size 2350 x 1150 x 750mm. The side unit shall

be 1200 x 600 x 750mm. The table is made of 25 mm thick MDF – one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to

top. Soft closing access flap within-build power box are provided on work surface for wire management. The ERU top is made of 25 mm thick MDF one side pre-

laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The modesty panel is made of 25 mm thick MDF one side pre-laminate

board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The understructure is made of 25 mm thick Pre-laminated twin board of E1-P2

grade and approved shade edge banded with matching 2 mm thick PVC lipping. The pedestal is made of 25 mm thick Pre-laminated twin board of E1-P2 grade

12 and approved shade edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25 mm thick MDF one side pre-laminate board with 0.4 mm PVC 1 101556 101556 PED Cabin

membrane pressed on to top pedestal construction is BOX-BOX-FILE type which uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is

325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security.Complete all

as per the direction of Engineer in Charge.

Providing and placing in position back unit.The Back Unit shall be of dimensions 2350 x 500 x 750mm. It shall be made of 25mm thick MDF – one side pre-laminate

board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. The Slide door unit is made of 25 mm thick Pre-laminated twin board of E1-P2

13 grade and approved shade edge banded with matching 2 mm thick PVC lipping. Shutters are made of 25mm thick MDF one side pre laminate board with 0.4mm 1 55589 55589 PED Cabin

PVC membrane pressed on top. Shutters have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Storage is provided with lock for

Digitally signed by AMIT

Providing, supplying and placing of High Back Chair. SEAT/BACK ASSEMBLY : The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic

Inner should be upholstered with pure leather and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf for 25%

compression.The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with

Seat SIZE : 47.6 cm. (W) x 49.2 cm. (D)

BACK SIZE : 47.5 cm. (W) x 77 cm. (D)

ARMRESTS: The armrest top should be moulded from polyurethane(PU), upholstered in pure leather and mounted on to a drop lift adjustable type tubular armrest

support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps.

ACTIVE BIO-SYNCHRO MECHANISM: The adjustable tilting mechanism should be designed with the following features:

• 360° revolving type.

• Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort.

• Tilt tension adjustment can be operated in seating position.

• 5-position Tilt limiter giving option of variable tilt angle to the chair.

• Seat/back tilting ratio of 1: 2

• The mechanism housing should be made up of HPDC Aluminium black powder coated.

SEAT DEPTH ADJUSTMENT: Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 6.0±0.5

ADJUSTABLE BACK SUPPORT: Back Frame should be connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for

the comfortable back support to suit individual need.

PNEUMATIC HT. ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.0±0.3 cm.

PEDESTAL ASSEMBLY The pedestal should be High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal should be 65.0 ±

0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.)

TWIN WHEEL CASTORS:The twin wheel castors should be injection moulded in Black Polypropylene.

Overall Dimensions of Chair

Seat Height -44.5 to 54.5 cm.

Height -114.0-131.5 cm.

Width & Depth of Chair as measured from base - Width-76.1 cm and Depth-76.1 cm

Providing, supplying and placing of Mid Back Chair. SEAT /BACKASSEMBLY : The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic

Inner should be upholstered with pure leather and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf for 25%

compression.The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with

Seat SIZE : 47.6 cm. (W) x 49.2 cm. (D)

BACK SIZE : 46.5 cm. (W) x 59.5 cm. (D)

ARMRESTS: The armrest top should be moulded from polyurethane(PU), upholstered in pure leather and mounted on to a drop lift adjustable type tubular armrest

support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps.

ACTIVE BIO-SYNCHRO mechanism: The adjustable tiltng mechanism should be designed with the following features:

• 360° revolving type.

• Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort.

• Tilt tension adjustment can be operated in seating position.

• 5-position Tilt limiter giving option of variable tilt angle to the chair.

• Seat/back tilting ratio of 1: 2

• The mechanism housing should be made up of HPDC Aluminium black powder coated.

SEAT DEPTH ADJUSTMENT: Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 6.0±0.5

ADJUSTABLE BACK SUPPORT: Back Frame should be connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for

the comfortable back support to suit individual need.

PNEUMATIC HT. ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.0±0.3 cm.

PEDESTAL ASSEMBLY The pedestal should be High Pressure Die cast polished hed Aluminium and fitted with 5 nos. twin wheel castors. The pedestal should be 65.0 ±

0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.)

TWIN WHEEL CASTORS:The twin wheel castors should be injection moulded in Black Polypropylene.

Overall Dimensions of Chair

Seat Height -44.5-54.5cm.

Height -96.5 - 114.0cm.

Width & Depth of Chair as measured from base - Width-76.1 cm and Depth-76.1 cm

Digitally signed by AMIT

Providing and Placing sofa of size 1320mm(L)x860mm(D)x450mm seat height.Backrest with a horizontal

stitch line gives a comfortable cushioned look.• Compact, contemporary design that leaves enough

16 space for other furniture and is easy to maintain.• Demarcated seating with special attention to overall 1 29354 29354 PED Cabin

finish and details. • Wood accents add warmth to the aesthetics.

Providing and Placing sofa of size 920mm(L)x860mm(D)x450mm seat height.Backrest with a horizontal

stitch line gives a comfortable cushioned look.• Compact, contemporary design that leaves enough

17 space for other furniture and is easy to maintain.• Demarcated seating with special attention to overall 1 20934 20934 PED Cabin

finish and details. • Wood accents add warmth to the aesthetics.

Dimensions W x H x D (cm) - 120.1 x 41.1 x 59.4

Finish Color - Wenge

Primary Material - Tempered Glass

Number of Shelves - 4

18 Warranty - 1 Year 1 15258 15258 PED Cabin

Net Weight (kg) - 31

Style - Contemporary & Modern

Delivery Condition - Knock Down

Dimensions W x H x D (cm)-60 x 45 x 60

Material : 18 mm thk prelaminated particle board

with 10 mm thick toughed glass

Construction : Knock down

1) MIP lamination in Black ink shade with

matching lipping in Matt finish

2) Digitally printed glass which is matching with PLT

Made of 36mm thick MDFone side pre laminate board conforming to IS14587:1998 with

0.4mm PVC membrane pressed on to top and having chamfered edge. Full length access

panel is provided with soft closing hinges inline with worktop edge. Worktop is available in

various shapes as shown above. The understructure consist of mixture of 18mm and 25mm Thick Pre-laminated twin board

of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with

matching 2 mm thick PVC lipping. Aluminium alloy63400- WP profile is used for

connecting panels together. Modesty Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade

conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. An array of panels made of 0.8mm and 1.2 mm CRCA MS IS:513, epoxy polyester

powder coated (DFT 40-60 microns) is used for flow of wires and cables. Cutout for

Standard Anchor Roma 4 module is provided for electrical fittings in Straight two seater

and single seater modules below access flap per seat. The table is equipped with Extron cables cubbies along with cable retractors as standard

offering only for 1800mm head module, 2350mm head module, 150° head module and

165° head module. For straight two seater and single seater modules, provision to mount

AV cables is provided (eg. HDMI,VGAA,etc). Only Corner 90°, 30° corner and 50° corner

modules have provision for wire flow between adjacent tables. Additional Wirecover made

of 0.8mm Thick CRCA, provided below worktop to conceal Microphone wires running from

table top to wire tray.

Digitally signed by AMIT

Providing and placing high back Chair with headrest. The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The back is made up of injection moulded glass

filled nylon & upholstered using net fabric with high tenacity yarn. Seat Size:- 47cm(w) × 51.5cm (D), Back size: 45.0Cm, x 65.3 cm. The HR polyurathene foam is

moulded with density =45+/-2 kg/m cube and hardness 16± 2 kgf as per is:7888 for 25% compression. The armrest has an up=Down adjustment of 8.5 ± 0.5cm which is

provided in armrest structure. It shall have Front pivot synchro mechanism with following features. 360 degree revolving type, Single point control, front fivot tilt, tilt

tension adjustment, 4 position locking with anti- shock feature, seat/back tilting ration of 1:2. The lumber support consists of polypropylene pad with mouled

polyurathene foam & covered with polyester fabric. The height of lumber pad can be adjusted through two projecting knobs provided on the rear side of the pad.

Lumber pad has an adjustment of 8.0± 0.5 cm in height. The must be greenguard certified. the work shall be carried out as per guidance and instructions recieved

from Engineer Incharge. This shall come along a headrest from same family.

Providing and placing in position mid back chair.The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The back is made up of injection moulded glass filled

nylon & upholstered using fabric with high tenacity yarn. Seat Size:- 47cm(w) × 51.5cm (D). The HR polyurathene foam is moulded with density =55+/-2 kg/m cube

and hardness 16± 2 kgf as per is:7888 for 25% compression. The armrest has an up=Down adjustment of 8.5 ± 0.5cm which is provided in armrest structure. Armrest top

has an integrated layer of thermoplastic elastomer. Armrest is made up of plastic injection moulded nylon with textured top. It shall have Front pivot synchro

mechanism with following features. 360 degree revolving type, Single point control, front fivot tilt, tilt tension adjustment, 4 position locking with anti- shock feature,

22 seat/back tilting ration of 1:2. The lumber support consists of polypropylene pad with mouled polyurathene foam & covered with polyester fabric. The height of 45 13640 613820 Board Room

lumber pad can be adjusted through two projecting knobs provided on the rear side of the pad. Lumber pad has an adjustment of 8.0± 0.5 cm in height. The must

be greenguard certified. the work shall be carried out as per guidance and instructions recieved from Engineer Incharge. This shall come along a headrest from

same family. It shall be SCS IAQ certified for Indoor Air Quality.

2100 X 1150 X 740 Work top-Made of 25mm Thick Pre-laminated twin board of E1 grade and approved shade conforming , Edge banded with matching 2 mm thick

PVC lipping. Access panels provided with soft closing hinges. Understructure-The Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board of

E1 grade and approved shade conforming, Edge banded with matching 2 mm thick PVC lipping. Anodised aluminium alloy 63400 - WP profile is added at bottom

edges for improving the aesthetics. The product has a knock-down construction. Wire Management-Bottom cabinet with door is provided for flow of wires and

23 cables. Cutout provision below Access flap at four locations for standard 8 module Anchor Roma is provided. Beside each cutout, an additional cutout with plate is 1 43439 43439 Meeting Room

provided for mounting Audio Visual Cables (eg. HDMI,VGA-A,etc). Company should be ISO-9001, 14001, 45001, 50001, BIFMA, AIOTA and Greenguard certified.

Product should be Greenguard (UL) certified.

Worktop :Worktop is made of 25mm thk. PTL E1- P2 GRADE for PLT conforming to IS: 12823, edges shall be provided with machine pressed 2 mm thick PVC lipping

glued with hot melt EVA glue. Table Connector All tables are provided with heavy duty table connector made with metal integrated Engineering plastic. Used for

making layout configuration using two or more tables. Modesty: Modesty is made of 15mm PLT E2 GRADE for PLT conforming to IS: 12823, edges shall be provided

with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. Recta table modesty is provided with a latch made of 2mm thick CRCA steel as per IS

513 and is powder coated with min 45 micron thickness of epoxy polyester coating.Latch is fixed with knurled bush made of 20mm Dia MS Rod as per IS 432 in zn

black finish. Latch can be used to align modesty if two or more recta tables are connected side by side. Under-structure: Legs are made by welding the

combination of MS ERW round Tube Ø63.5 X 2mm THK as per IS:7138, flanges made CRCA sheet of 1.6mm thk. and 1.2mm thk. as per IS 513, inside plates made of HR

24 5mm thk. sheet as per IS:2062. Assembly is epoxy polyester powder coated (Min 45 micron). Legs are provided with casters of Ø65mm lockable type for ease of 4 31033 124133 Bidding Room

movement and can be locked when required at any position.Each castor is also provided with 2 knurled disk of 50mm dia and 5 mm thick made of MS bar (IS 432)

with ZN black finish for leveling adjustment of 10mm. Table top connected with spring loaded mechanism with pull handle made of MS ERW Ø16x1.2mm thk with an

insert tube of Ø12.7x1.6mm thk tube as per IS:7138. Coated with epoxy polyester powder coated (Min 45 micron) to operate table top.

Digitally signed by AMIT

Providing, supplying and placing of Mid Back Chair. SEAT/BACK ASSEMBLY: The seat is made up of 1.5 ±0.1cm. thick hot-pressedplywood and upholstered with fabric

upholstery covers and moulded Polyurethane foam.The seat has extra thick foam on front edge to give comfort to popliteal area.

The Back is injection moulded in glass filled Polypropylene which is upholstered withMesh fabric.The back consist of adjustable lumbar support made of injection

mouldedPolypropylene having an adjustment of 5.0 ±0.1 cm.

The chair seat & back size are

*SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D)*MESH BACK SIZE 51.0 cm. (W) x 70.0 cm. (H)

HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45±2 kg/m³ and hardness 16±2 kgf as per IS:7888 for 25%

ARMRESTS :The adjustable armrest is designed with the following features :· Up-Down adjustment– 6 steps (7.2 ± 0.5cm range)

· Armrest top is mounted on Armrest structure made of glass filled Nylon· Armrest Top is PU moulded over glass filled Nylon insert.

CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism isdesigned with the following features:

· 360° revolving type.

25 · 3 position locking with anti shock mechanism. 8 11213 89700

· Tilt tension adjustment

PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment with anadjustment stroke of 9.5 ± 0.3cm.

PEDESTAL ASSEMBLY : The pedestal is injection moulded in glass-filled Nylon andfitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center

dia.(76.1 ±1.0cm with castors).

TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon.

WIDTH (W): 76.1 CM.

DEPTH (D): 76.1 CM.

HEIGHT (H): 101.5 - 111.0 CM.

SEAT HEIGHT (SH): 44.5 - 54.0 CM.

Supplying and placing Table with overall size of 1800x900x750. Worktop is made of Medium density fibreboard, (MDF) 25mm thk PU tops (E1 grade). On top side PU

painting of minimum 2H pencil hardness with High gloss and matte on bottom side as per color chart. The Work tops are available in 3 shapes, Trio legs is fabricated

from combination of 1.2 mm, 2 mm thk CRCA (as per IS: 513), 3mm, 5mm thk HR which has a triangular shape. Argo Shield welding is used for fabrication. This is a

26 three dimensional leg which has inclination in 2 planes, it has a ball socket M8 leveler with bottom translucent cap, that allows adjustment up to 50 mm height. The 4 23644 94577 Cafeteria

whole structure is EPOXY POLYSTER Powder Coated (DFT 40-60 microns). It is assembled using Alloy steel hardware (Ni / Zn plated).

1. SHELL : The single piece seat back shell is made up of injection moulded high impact strength glass filled polypropylene polymer compound. SHELL SIZE : 44.0 cm.

2. M.S. POWDER COATED UNDERSTRUCTURE OPTION : The powder coated welded tubular frame is made from ∅ 2.22 ± 0.03 cm x 0.16 ± 0.0128 cm M.S. E.R.W tube.

The 0.16 ± 0.008 cm thk CRCA sheet is welded to tubes for fixing shell to the frame. The shoe is made of high impact strength polypropylene polymer compound and

27 are fitted at the end of the tubular frame. 16 4041 64657 Cafeteria

WIDTH (W) : 51.5 CM DEPTH (D) : 52.5 CM HEIGHT (H) : 81.8 CM SEAT HEIGHT (SH) : 45.9 CM. Company should be Greengaurd(UL) BIFMA and AIOTA certified.

Company should be ISO-9001, 14001, 45001, 50001, BIFMA, AIOTA and Greenguard certified. Product should be Greenguard (UL) and BIFMA LEVEL-2 certified.

Seat is leatherette upholstered cushion fitted to a seat tray. The cushion is made of 1.2 cm of PU slabstockfoam. Slabstock foam glued to CRCA sheet of 0.12 cm

(t0.01cm) thick and upholstered with leatherette. The seat tray is made of CRCA steel of 0.25 cm thk (#0.01cm) as per IS:513 It is powder coated with epoxy based

polyster powder coating (40-60 microns). * SEAT CUSHION SIZE: 40.0 cm. (W) x 34.5 cm. (D) * TOP TRAY SIZE: 41.5 cm. (W) x 40.0 cm. (D). WOODEN UNDERSTRUCTURE:

Understructure of bar stool is made ofFSC-certified seasoned teak wood finished with a clear matt coat of PU lacquer. * UNDERSTRUCTURE SIZE: 48.6 cm (W) x x cm

28 4 22363 89453 Cafeteria

(D) x x cm (H) •FOOT REST ASSEMBLY: Foot rest is made up of Ø1.6 cm (‡0.02 cm) M.S. ERW tube (IS:71380). It is epoxy based powder coating (40-60 microns).

Additionally it is coated with abrasion resistance coating. * FOOT REST SIZE: 40.3 cm (W) × 38.7 cm (D)

Digitally signed by AMIT

The seat sub-assembly shall be made up of 1.2+/-0.1cm thk plywood upholstered with moulded foam and polyster fabric and shall be covered with an injection

moulded polypropylene outer cover. The seat should tip-up when not in use and this feature should be used while stacking the chairs horizontally. The back sub-

assembly shall be made up of injeection -moulded polypropylene inner upholstered with moulded foam and polyster fabric and shall be covered with an injection

moulded polypropylene outer cover. The countoured back with width extension at the bottom area shall be designed to give comfort to lower back. The back

flexing feature shall allows the back to tilt by 9+/-2 degree to aid the user in adopting a comfortable reclining posture. The dimensions of back shall be 45.2cm(W) X

44.6cm(H). and of seat shall be 47.0cm (W) X 50.0cm(D). The powder coated 4 leg structure shall be made of 2.2+/-0.03cm dia X 0.25+/-0.02cm thk M.S.E.R.W. tube

front and rear leg shall be welded along with connecting tube made of 1.9+/-0.02cm dia X 0.2+/-0.016cm thk M.S.E.R.W tube to form the tubular frame assembly.

The legs shall be provided with injection moulded adopter bush in black nylon and brake-loaded castors enabling easy maneuvering while not in use and stable

siting while in use. The armrests structure shall be made up of 2.2+/-0.03 cm dia X 0.25+/-0.02cm thk M.S.E.R.W. tube welded to the tubular frame structure and

having a scratch-resistant ABS arm top. The chairs should be stacked horizontally when not in use. The full desklet assembly shall be flip-up type and shall be made

up of extension tube of 1.9+/-0.02cm dia X 0.2+/-0.016cm thk M.S.E.R.W. tube and a support tube on L.H. side of 1.6+/-0.02cm dia X 0.2+/-0.016cm thk M.S.E.R.W.

tube on which an scratch resistant ABS desklet top shall be fixed and covered on bottom side with a bottom cover. The polyurethane foam shall be moulded with

density= 70.0+/-8.0kg/m3 and hardness=20+/-2 for seat and 16+/-2 for back at 25% compression. The Twin wheel castors shall be injection moulded in black. Overall

Dimensions of Chair shall be Seat Height - 47.5 cm, Height - 89.0cm, Width & Depth of Chair as measured from pedestal - Width-71.0cm and Depth-82.0 cm.

Supplying and Placing in place of 3 seater sofa. The overall dimensions of the sofa shall be 2060W x 905D x 855H. The seat should be made of PU foam with Density

28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK FOAM:

The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with

fabric or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and termite proof) and pinewood

32 of cross section deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly is mounted over understrucrure for cushioning 1 46706 46706 Reception

effect. It should be a welded assembly made in Stainless steel tube & plate with plastic endcap. Company should be ISO-9001, 14001, 45001, 50001, BIFMA, AIOTA

and Greenguard certified.

Supplying and Placing in place of 1 seater sofa. The overall dimensions of the sofa shall be 860W x 905D x 855H. The seat should be made of PU foam with Density 28

± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK FOAM:

The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with

fabric or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and termite proof as per IS:303.)

33 2 29274 58548 Reception

and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly is mounted over understrucrure for

cushioning effect. It should be a welded assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap.

Glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure. It shall be a welded

34 assembly made in SS202 grade having dia. 12+/-0.04. overall dimensions of table shall be Width of table= 112.0 cm, Depth=60.0 cm, height=35.1 cm.Company 1 14831 14831 Reception

should be ISO-9001, 14001, 45001, 50001, BIFMA, AIOTA and Greenguard certified.

Glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure. It shall be a welded

35 assembly made in SS202 grade having dia. 12+/-0.04 as per. overall dimensions of table shall be Width of table= 60.0 cm, Depth=60.0 cm, height=35.1 2 9854 19709 Reception

cm.Company should be ISO-9001, 14001, 45001, 50001, BIFMA, AIOTA and Greenguard certified.

Digitally signed by AMIT

Providing, supplying and placing of Mid Back Chair. SEAT/BACK ASSEMBLY: The seat is made up of 1.5 ±0.1cm. thick hot-pressedplywood and upholstered with fabric

upholstery covers and moulded Polyurethane foam.The seat has extra thick foam on front edge to give comfort to popliteal area.

The Back is injection moulded in glass filled Polypropylene which is upholstered withMesh fabric.The back consist of adjustable lumbar support made of injection

mouldedPolypropylene having an adjustment of 5.0 ±0.1 cm.

The chair seat & back size are

*SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D)*MESH BACK SIZE 51.0 cm. (W) x 70.0 cm. (H)

HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45±2 kg/m³ and hardness 16±2 kgf as per IS:7888 for 25%

ARMRESTS :The adjustable armrest is designed with the following features :· Up-Down adjustment– 6 steps (7.2 ± 0.5cm range)

· Armrest top is mounted on Armrest structure made of glass filled Nylon· Armrest Top is PU moulded over glass filled Nylon insert.

CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism isdesigned with the following features:

· 360° revolving type.

36 · 3 position locking with anti shock mechanism. 2 11213 22426 Reception

· Tilt tension adjustment

PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment with anadjustment stroke of 9.5 ± 0.3cm.

PEDESTAL ASSEMBLY : The pedestal is injection moulded in glass-filled Nylon andfitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center

dia.(76.1 ±1.0cm with castors).

TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon.

WIDTH (W): 76.1 CM.

DEPTH (D): 76.1 CM.

HEIGHT (H): 101.5 - 111.0 CM.

SEAT HEIGHT (SH): 44.5 - 54.0 CM.

MAIN WORKTOP : Made of 43mm Thick (±1) combination of MDF and particle board with top veneer face

coated with clear lacquer. All edges are edge banded with matching 1mm thick veneer

lipping. LEATHER PAD: Made of 18mm Thick (±1) MDF with Leatherette wrapped around top surface. This

leather pad is fixed to main top panel. Drawer Unit Top panel and drawer unit modesty panel is made of 43mm Thick (±1) combination of

MDF and particle board with top veneer face coated with clear lacquer. All thickness

edges are edge banded with matching lipping. Remaining construction is of 18mm Pre-laminated twin board (PLT) of E1-P2 grade and

approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick

PVC lipping. Bottom panel of drawer is 9mm thick particle board with leatherette on top

surface. Drawer unit is provided with soft closing channels for smooth opening and closing.

Drawer unit is secured with side central lock. MODESTY:

Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved

shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC

lipping. Modesty is fitted with aluminum trims. ERU TOP PANEL:

Made of 43mm Thick (±1) combination of MDF and particle board with top veneer face Director Room

37 coated with clear lacquer. All edges are edge banded with matching 1mm thick veneer 3 203475 610424

(Renovation Floor)

lipping. Top panel is provided with elliptical cable cover which contains 2 USBs, 1

Universal socket, 1misc. cable grommet, 1 HDMI connector and 1 CAT-6 connector. UNDERSTRUCTURE:

Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved

shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC

lipping.DOOR PANELS:

Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved

shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC

lipping. Door panels are provided with lock ERU HEIGHT ADJUSTABLE LEG:

The Leg consist of Outer and Inner Aluminum Extrusions (AL 63400 - WP). The Work

surface moves up & down due to the extension and compression of smooth functioning

gas lift with adjustable height and consistent motion during operation. The gas lift is

actuated using lever mechanism, operated manually WORKTOP SUPPORT FRAME:

The Worktop Support Frame consist of two 25.4x25.4x1.2mm thk ERW Tube (As per IS:

Digitally signed by AMIT

SEAT ASSEMBLY: The Cushioned seat inner is made of injection moulded glass filled poly-amide.

Upholstered seat sub-assembly consists of moulded High Resilience (HR) Polyurethane foam of

Density 45±2 kg/m³, and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression.

*Seat SIZE: 45.5cm. (D) x 52.4cm. (W)

2. BACK ASSEMBLY: The Cushioned back is made of PU Foam with Polypropylene Injection molded

*HIGH BACK SIZE: 50.5 cm. (W) x 76.7 cm. (D)

3. ARMRESTS: The armrest having four range of adjustment · Height adjustment sub assembly is inserted in the Aluminum Die Cast Arm body & all other Director Room

adjustment are provided in adjustable arm top sub assembly. · Up-Down adjustment has 8 position (10.5±0.5cm range) · Arm top swivel adjustment- 2 position, (Renovation Floor)

12°±2° swivel inside

· Arm top width adjustment - Any position (2.0±0.5cm range each arm top) · Arm top To - Fro Adjustment- any position (4.0±0.5cm range) · Armrest top is made up of

high density PU molded over glass filled Poly-amide inner.

4. POSTURE PERFECT MECHANISM: The adjustable tilting mechanism is designed with the following

features: · 360° revolving type. · Forward tilt of sesat and back. · Upright tilt lock. · Tilt tension adjustment can be operated in seating position. · 3-position Tilt limiter.

5. SEAT DEPTH ADJUSTMENT: Seat depth adjustment is housed below the seat and integrated with

the mechanism with help of Polypropene Seat cover. Seat Depth can be adjusted in sitting position.

Seat depth adjustment range is of 5.0±0.5 cm.

6. ADJUSTABLE BACK SUPPORT: Back Assembly is connected to buff polish die cast aluminum

Spine with an Up-Down mechanism assembly. Back Height can be adjusted in sitting position. It can

be adjusted in the range of 7.5±0.5 cm.

SEAT ASSEMBLY: The Cushioned seat inner is made of injection moulded glass filled poly-amide.

Upholstered seat sub-assembly consists of moulded High Resilience (HR) Polyurethane foam of

Density 45±2 kg/m³, and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression.

*Seat SIZE: 45.5cm. (D) x 52.4cm. (W)

2. BACK ASSEMBLY: The Cushioned back is made of PU Foam with Polypropylene Injection molded

*MID BACK SIZE: 50.5 cm. (W) x 61.8cm. (D)

3. ARMRESTS: The armrest having four range of adjustment · Height adjustment sub assembly is inserted in the Aluminum Die Cast Arm body & all other Director Room

adjustment are provided in adjustable arm top sub assembly. · Up-Down adjustment has 8 position (10.5±0.5cm range) · Arm top swivel adjustment- 2 position, (Renovation Floor)

12°±2° swivel inside

· Arm top width adjustment - Any position (2.0±0.5cm range each arm top) · Arm top To - Fro Adjustment- any position (4.0±0.5cm range) · Armrest top is made up of

high density PU molded over glass filled Poly-amide inner.

4. POSTURE PERFECT MECHANISM: The adjustable tilting mechanism is designed with the following

features: · 360° revolving type. · Forward tilt of sesat and back. · Upright tilt lock. · Tilt tension adjustment can be operated in seating position. · 3-position Tilt limiter.

5. SEAT DEPTH ADJUSTMENT: Seat depth adjustment is housed below the seat and integrated with

the mechanism with help of Polypropene Seat cover. Seat Depth can be adjusted in sitting position.

Seat depth adjustment range is of 5.0±0.5 cm.

6. ADJUSTABLE BACK SUPPORT: Back Assembly is connected to buff polish die cast aluminum

Spine with an Up-Down mechanism assembly. Back Height can be adjusted in sitting position. It can

be adjusted in the range of 7.5±0.5 cm.

Supplying and placing 2str leather sofa with overall size of 152x84x48cm. Durable and ergonomic

statement piece upholstered in pure leather at key touchpoints Clearly visible top grains of

41 leather adds to its aesthetic appeal, with soft foam at armrest and backrest for added comfort.Chesterfield design on the backrest lends it a premium, unique 3 65639 196916

(Renovation Floor)

look and feel.Seasoned solid wood frame and a plywood cross-section in the understructure ensures durability. Sturdy rubberwood rounded legs that can easily

take heavy loads, giving you the freedom to sit on it as you like without fearing damage

Digitally signed by AMIT

Supplying and placing 1str leather sofa with overall size of 106x84x48cm. Durable and ergonomic

statement piece upholstered in pure leather at key touchpoints Clearly visible top grains of

42 leather adds to its aesthetic appeal, with soft foam at armrest and backrest for added comfort.Chesterfield design on the backrest lends it a premium, unique 6 52648 315887

(Renovation Floor)

look and feel.Seasoned solid wood frame and a plywood cross-section in the understructure ensures durability. Sturdy rubberwood rounded legs that can easily

take heavy loads, giving you the freedom to sit on it as you like without fearing damage

Overall Size : Width : 100cm Depth : 65cm Height : 43cmTABLE MATERIALS: Glass of 08 mm thk tempered, Solid rubber woood legs and frame, MS sheet as bottom Director Room

shelf .DECORATION MATERIALS & SPECIFICATIONS: (DENSITY / TYPE): PU coating to the rubber wood parts, clear glas (Renovation Floor)

Overall Size : Width : 60cm Depth : 60cm Height : 45cmTABLE MATERIALS: Glass of 08 mm thk tempered, Solid rubber woood legs and frame, MS sheet as bottom Director Room

shelf .DECORATION MATERIALS & SPECIFICATIONS: (DENSITY / TYPE): PU coating to the rubber wood parts, clear glas (Renovation Floor)

Supplying of side storage unit of officers having dimension 1190WX 450DX 740H:Overall size of hinge door unit is 1190(H)x740mm (h)x450 mm (D). Providing and

placement of back storages with : CONSTRUCTION & MATERIAL Construction is a knockdown construction of 25mm thk and 18mm thk Pre-Laminated boards with

metal cladding of 1.0 mm thk C.R.C.A (as per IS:513) from outside. Side metal cladding is coated with Epoxy polyester powder of 50±10 microns thickness. TOP

OPTIONS- The Storage units are provided with 11mm thk bent metal tops made of 1.0 mm thk C.R.C.A (as per IS:513). The metal tops are coated with Epoxy polyester

powder of 50± 10 microns thickness. DOOR & DOOR OPENINGtwo door opening for all other width of 1050 W.The doors are made of 18mm thk Pre-laminated boards

45 with decorative laminate on one side and backing laminate on the other side. SHELVING- Height wise adjustable shelf mounting holes provided on side panels for 10 25340 253395 Workstation Area

easy interchange of shelf height as required. Fixed shelves along with adjustable shelves provided only in case of 4.0 feet height units. No fixed shelves for 2.5 feet

height storage units. Uniformly distributed load capacity for each shelf is 40kg maximum. SKIRTING OPTION- The skirting units are provided with 150mm high skirting

made of 1.0 mm thick C.R.C.A(as per IS:513) and is coated with Epoxy polyester powder of 50+-10 micros thickness. LEVELER-Screw type adjustable leverer with

plastic base provides vertical adjustment for floor unevenness and levelling of units.BACK PANELS Back panels are made of 18mm thick pre-laminated boards with

options of decorative as well as fabric finishes. 2.5 height units consists of single back panel whereas 4.0 height and 4.5 height units consist of split back top panel

and split back bottom panels separated by an Aluminium extrusion. LOCKING MECHANISM- 3-way nickel plated wooden furniture lock is provided for effective and

positive locking of doors. HANDLE- Aesthetically appealing recessed handles of Aluminium extrusion are provided for easy opening and closing.The OEM should be

ISO 9001:2015,ISO 14001:2015 & ISO 18001:2007 certified..

Digitally signed by AMIT

ESTIMATE FOR CIVIL CONSTRUCTION

Proposed Refurbishment of 5th Floors for Railtel office at Office Block-1, East Kidwai Nagar,(New Delhi)

I.NO DESCRIPTION UNIT QTY RATE AMOUNT

SH CONCRETE WORK 1.00

CEMENT CONCRETE (CAST IN SITU)

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness)

including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or

lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor

1.1 etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 4.2

1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone

1.1.1 aggregate 20 mm nominal size derived from natural sources) cum 42.00 9,895.20 4,15,598.00 4.2.3

CENTERING AND SHUTTERING

1.2 Centering and shuttering including strutting, propping etc. and removal of form work for : 4.3

Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth

1.2.1 and string courses fillets, kerbs and steps etc. sqm 31.00 842.50 26,118.00 4.3.2

Total Carried Over to Abstract for Sub Head: 1.00 Concrete Work : 4,41,716.00

SH REINFORCED CEMENT CONCRETE WORK 2.00

REINFORCED CEMENT CONCRETE( CAST IN SITU)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15°

landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair

cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing

and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources :

2.1 3 graded stone aggregate 20 mm nominal size derived from natural sources). cum 0.05 11,505.50 575.00 5.3

2.2 Centering and shuttering including strutting, propping etc. and removal of form for 5.9

Lintels, beams, plinth beams, girders, bressumers and

2.2.1 cantilevers with water proof ply 12 mm thick sqm 2.00 736.40 1,473.00 5.9.5

Digitally signed by AMIT

I.NO DESCRIPTION UNIT QTY RATE AMOUNT

STEEL REINFORCEMENT

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position

2.3 and binding all complete above plinth level. 5.22A

2.3.1 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 8.00 107.85 863.00 5.22A.6

Total Carried Over to Abstract for Sub Head: 2.00 Reinforced Cement Concrete Work : 2,911.00

SH MASONRY WORK 3.00

AUTOCLAVED AERATED CEMENT BLOCKS-AAC

Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks

in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse

sand ). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third

3.1 course of masonry work. cum 9.00 10,195.45 91,759.00 6.38

Total Carried Over to Abstract for Sub Head: 3.00 Masonry Work : 91,759.00

SH CLADDING WORK 4.00

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished,

machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of

required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4

(1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment,

epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss

4.1 finish etc. complete at all levels. 8.2

4.1.1 Granite stone slab colour black, Cherry/Ruby red 8.2.2

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine

polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-

4.2 Charge. 8.3

Digitally signed by AMIT

I.NO DESCRIPTION UNIT QTY RATE AMOUNT

Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and

4.3 drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. metre 117.00 568.55 66,520.00 8.4

ITALIAN MARBLE STONE WALL LINING

Providing and fixing machine cut, mirror/ eggshell polished , Marble stone work for wall lining

(veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever

required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3

(1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including

pointing with white cement slurry admixed with pigment of matching shade, including rubbing,

curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-

4.4 in-Charge. 8.11

4.4.1 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc. sqm 7.00 10,414.80 72,904.00 8.11.1

DECORATIVE VENEER FACING

Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-

1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface

4.5.1 Decorative veneer facings of approved manufacture sqm 183.00 1,946.25 3,56,164.00 8.28.1

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be

specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle

green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados,

over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey

cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of

matching shade complete.

Total Carried Over to Abstract for Sub Head: 4.00 Cladding Work : 7,09,935.00

SH WOOD AND P.V.C. WORK 5.00

HARD WOOD BACKFRAMING

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with

5.1 necessary stainless steel screws etc. 9.3

Digitally signed by AMIT

I.NO DESCRIPTION UNIT QTY RATE AMOUNT

VISION PANEL GLAZING

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed

shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding

portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed

5.2 shutters 25 mm to 40 mm thick : 9.7

5.2.1 Float glass panes 9.7.7

5.2.1.1 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm) sqm 1.00 2,600.45 2,600.00 9.7.7.2

FLUSH DOOR SHUTTER

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type,

core of block board construction with frame of 1st class hard wood and well matched teak 3 ply

5.3 veneering with vertical grains or cross bands and face veneers on both faces of shutters. 9.2

5.3.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws sqm 8.00 3,473.85 27,791.00 9.20.1

25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges

5.3.2 with necessary screws sqm 5.00 2,819.25 14,096.00 9.20.3

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges

5.4 of flush door shutters (over all area of door shutter to be measured). sqm 13.00 462.35 6,011.00 9.23

Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass

5.5 excluded) (overall area of door shutter to be measured): 9.24

5.5.1 Rectangular or square sqm 6.00 199.15 1,195.00 9.24.1

Extra if louvers (not exceeding 0.2 sqm) are provided in flush door shutters (overall area of door

5.6 shutters to be measured). 9.25

5.6.1 Decorative type door sqm 2.00 405.45 811.00 9.25.1

GYPSUM BOARD PARTITIONS

Digitally signed by AMIT

I.NO DESCRIPTION UNIT QTY RATE AMOUNT

Poviding and fixing partition upto ceiling height consisting of G.I. frame and required board,

including providing and fixing of frame work made of special section power pressed/ roll form G.I.

sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling

channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and

ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm

length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide

having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within

flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6

mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with

5.7 suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, 9.105

and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and

ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the

frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9

mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two

boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to

a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25

mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per

manufacture's specification and direction of engineer in charge all complete.

75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass Reinforced

5.7.1 Gypsum (GRG) plaster board conforming to IS: 2095: part 3 (Board with BIS certification marks) sqm 34.00 2,131.10 72,457.00 9.105.1

75mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum

5.7.2 plaster board conforming to IS: 2095: (part I): 2011 (Board with BIS certification marks) sqm 120.00 1,818.15 2,18,178.00 9.105.2

HIGH PRESSURE LAMINATED SHEET FACING

Providing & fixing decorative high pressure laminated sheet of plain /wood grain in gloss / matt/

suede finish with high density protective surface layer and reverse side of adhesive bonding

5.8 quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 9.127

Digitally signed by AMIT

I.NO DESCRIPTION UNIT QTY RATE AMOUNT

PLAIN GYPSUM PLASTER BOARD WALL PANELING

Providing and fixing, in position concealed G.I. section for wall paneling using board of required

thickness fixed on the 'W' profile (0.55 mm thick) having a knurled web of 51.55 mm and two

flanges of 26 mm each with lips of 10.55 mm, placed @ 610 mm C/C in perimeter channel having

one flange of 20 mm and another flange of 30 mm with thickness of 0.55 mm and web of length

27 mm. Perimeter channel is fixed on the floor and the ceiling with the nylon sleeves @ 610 mm

C/C with fully threaded self-tapping dry wall screws. Board is fixed to the 'W' profile with 25 mm

countersunk ribbed head screws @ 200 mm C/C., all complete as per the drawing & directions of

engineer-in-charge, the joints of the boards are finished with specially formulated jointing

5.9 compound and 48mm wide jointing tape to provide seamless finish. 9.133

5.9.1 Plain Gypsum plaster board conforming to IS: 2095 Part - 1:2011 (Board with BIS certification marks) 9.133.3

Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock

on back side of the Panic Latch of reputed brand and manufacture to be approved by the

5.10 Engineer- in- charge, all complete. each 1.00 8,366.15 8,366.00 9.139

COMMERCIAL PLY PLAIN LINING

Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of

approved primer on one face, and fixed on wooden /steel frame work, complete as per

5.11 direction of Engineer-in charge (Frame work shall be paid for separately). 9.140

5.11.1 12 mm thick commercial ply conforming to IS : 1328 BWR type sqm 123.00 1,224.65 1,50,632.00 9.140.1

MILD STEEL TUBE FRAME WORK

Digitally signed by AMIT

I.NO DESCRIPTION UNIT QTY RATE AMOUNT

Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6 mm hollow MS

tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm centre to

centre both ways (vertically & horizontally) or at required spacing near opening, with necessary

welding at junctions and fixing the frame to wall/ ceiling/ floors with steel dash fasteners of 8 mm

dia, 75 mm long bolt, including making provision for opening for doors, windows, electrical

conduits, switch boards etc., including providing with two coats of approved steel primer etc.

5.12 complete, all as per direction of Engineer-in-charge. kg 553.50 166.80 92,324.00 9.154

DOOR FRAME FOR SOLID FIRE RATED WITH VISION PANEL

Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x 60 mm

on vertical sides having built in rebate made out of 1.6 mm thick GI sheet ( Zinc coating not less

than 120gm/ m²) suitable for mounting 120 min Fire Rated Glazed Door Shutters. The frame shall

be filled with Mineral wool Insulation having density min 96Kg/m³ . The frame will have a provision

of G.I. Anchor fastners 14 nos ( 5 each on vertical style & 4 on horizontal style of size M10 x 80 )

suitable for fixing in the opening along with Factory made Template for SS Ball Bearing Hinges of

Size 100x89x3mm for fixing of fire rated glazed shutter . The frame shall be finished with a

approved fire resistant primer or Powder coating of not less than 30 micron in desired shade as

5.13 per the directions of Engineer - in- charge . (Cost of SS ball bearing hinges is excluded). metre 18.30 2,202.90 40,313.00 9.161

DOOR SHUTTER FOR SOLID FIRE RATED WITH VISION PANEL

Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 min Fire Rating

confirming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per laboratory approved

by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, top rail

& side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I.

sheet (zinc coating not less than 120gm/m²) duly filled mineral wool insulation having density min

96 kg/ m³ and fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm of

approved make, including applying a coat of approved fire resistant primer or powder coating

not less than 30 micron etc all complete as per direction of Engineer-in-charge (panelling to be

GLAZING FOR VISION PANEL SOLID FIRE RATED DOOR SHUTTER

Digitally signed by AMIT

I.NO DESCRIPTION UNIT QTY RATE AMOUNT

Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I.

beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/m²) of size 20 x 33

mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c ,

including applying a coat of approved fire resistant primer/ powder coating of not less than 30

micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as

per NBC 2016, IS 16231 (Part 3):2016 and as per direction of Engineer-in-charge with glass of

required thickness having 120 minutes of fire resistance both integrity & radiation control (EW120)

and minimum 20 minutes of insulation (EI20). The manufacturer have to give test

report/certification of fire glass and the glass should have the stamp showing the value of E, EW &

The glass shall be tested in approved NABL accredited lab or by any other accreditation body

which operates in accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 for

testing and calibration scopes shall be eligible. The maximum glazing size shall not be more than

Total Carried Over to Abstract for Sub Head: 5.00 Wood And P.V.C. Work : 9,81,579.00

SH STEEL WORK 6.00

MILD STEEL FRAMING IN ANGLE/T SECTION

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work,

including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer

Total Carried Over to Abstract for Sub Head: 6.00 Steel Work : 3,343.00

SH FLOORING WORKS 7.00

VITRIFIED FLOOR TILES

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the

manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved

make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse

sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white

7.1 cement and matching pigments etc., complete. 11.41.3

Digitally signed by AMIT

I.NO DESCRIPTION UNIT QTY RATE AMOUNT

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of

organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including

7.2 filling / grouting and finishing complete as per direction of Engineer-in-charge. 11.48

ITALIAN MARBLE STONE FLOORING

Providing and laying machine cut, mirror polished, Italian Marble stone flooring laid in required

pattern in linear portion of the building all complete as per architectural drawings, with 18 mm

thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse

sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white

cement slurry admixed with pigment to match the marble shade including rubbing, curing and

polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

7.3.1 18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark Emperadore etc. sqm 50.00 6,603.35 3,30,168.00 11.51.1

GRANITE STONE FLOORING

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear

as well as curvilinear portions of the building all complete as per the architectural drawings with

18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4

coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed

with pigment of matching shade including rubbing, curing and polishing etc. all complete as

7.4 specified and as directed by the Engineer-in-Charge : 11.55

7.4.1 Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. sqm 4.00 3,186.70 12,746.80 11.55.1

RAISED/FALSE ACCESS FLOORING

Digitally signed by AMIT

I.NO DESCRIPTION UNIT QTY RATE AMOUNT

Providing and fixing removable raised/false access flooring with system and its components of

approved make for different plenum height with possible height adjustment upto 50 mm,

comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame work

and G.I. Pedestal etc. all complete, as per the architectural drawings, as specified and as

7.5 directed by Engineer-in-charge consisting of: 11.54

(a) Providing at required spacing to form modular framework, pedestals made out of GI tube of

thickness minimum 2 mm and 25 mm outer diameter, fully welded on to the G.I. Base plate of size

100mm x 100mm x 3mm at the bottom of the pedestal tube, G.I. pedestal head of size

75mmx75mmx3.5 mm welded with GI fully threaded stud 16mm outer diameter with two GI Check

nuts screwed on the stud for level adjustment upto 50mm, locking and stabilizing the pedestal

head in position at the required level. The pedestals shall be fixed to the subfloor (base) through

base plate using epoxy based adhesive of approved make or the machine screw with rawl plug.

(b) Stringers system in all steel construction hot dipped galvanized of rectangular size

570x20x30x0.80mm thick having holes at both ends for securing the stringers on to the pedestal

head using fully threaded screws ensuring maximum lateral stability in all directions, the grid

formed by the pedestal and stringer assembly shall receive the floor panel, this system shall

provide adequate solid, rigid support for access floor panel, the system shall provide a minimum

clear uninterrupted clearance between the bottom of the floor for electrical conduits and wiring

etc. all complete as per the architectural drawings, as specified and as directed by the Engineer-

(c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti

static high pressure Lamination of 800H grade (FS800H). Access Floor panel shall be steel welded

construction with an enclosed bottom pan with uniform pattern of 64 hemispherical cones. The

top and bottom plates of Steel Gauges: top 0.6 mm and bottom 0.7 mm fused spot welded

together (minimum 64 welds in each dome and 20 welds along each flange). The panel should

be Corroresist epoxy coated for lifetime rust protection and cavity formed by the top and bottom

plate is filled with Pyrogrip noncombustible Portland cementitious core mixed with lightweight

foaming compound.

Digitally signed by AMIT

I.NO DESCRIPTION UNIT QTY RATE AMOUNT

The access floor shall be factory finished with Anti-static High Pressure laminate with Non Warp

technology upto 1mm thickness for superior adhesion and Surface flatness within 0.75mm.The

panel is to withstand a Concentrated Load of 363 kgs applied on area 25mm x 25mm without

collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand

and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all

complete as per the approved manufacturers specification and as per the direction of Engineer-

in-charge. All specification must be printed on the side of the panel to ensure the quality of the

7.5.1 450 mm Finished Floor Height (FFH). sqm 7.00 5,977.35 41,841.00 11.54.2

Total Carried Over to Abstract for Sub Head: 7.00 Flooring Works : 4,92,292.80

SH ROOFING WORKS 8.00

PLAIN GYPSUM BOARD CEILING

Providing and fixing false ceiling at all height including providing and fixing of frame work made

of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120

gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x

1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to

the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat

fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size

and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the

spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of

80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,

shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips

8.1 made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, 12.45

Digitally signed by AMIT

I.NO DESCRIPTION UNIT QTY RATE AMOUNT

including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm

long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre,

with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling

section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c,

including jointing and finishing to a flush finish of tapered and square edges of the board with

recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers

covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per

manufacturer's specification and also including the cost of making openings for light fittings, grills,

diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per

drawings, specification and direction of the Engineer in Charge but excluding the cost of

painting with :

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with

8.1.1 BIS certification marks) sqm 408.00 1,355.80 5,53,166.00 12.45.1

GI METAL CEILING

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal

level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized

@ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to

get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at

1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet,

1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600

mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick

(minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600

mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the

grid including, required cutting/making, opening for services like diffusers, grills, light fittings,

fixtures, smoke detectors etc.

Digitally signed by AMIT

I.NO DESCRIPTION UNIT QTY RATE AMOUNT

Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm

fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with

galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along

main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint,

8.2 all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.52

GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and

0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides

inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction

Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum),

including factory painted after bending and perforation, and backed with a black Glass fiber

A acoustical fleece. sqm 6.00 2,068.75 12,413.00 12.52.2

ROCK WOOL THERMAL INSULATION

Providing and fixing thermal insulation with Resin Bonded rock wool conforming to IS: 8183, having

density 48 kg/m3,50 mm thick,wrapped in 200 G Virgin Polythene Bags fixed to wall with screw,

rawel plug & washers and held and in position by criss cossing GI wire etc. complete as per

8.3 directions of Engineer in- Charge. sqm 361.00 322.50 1,16,423.00 12.62

Total Carried Over to Abstract for Sub Head: 8.00 Roofing Works : 6,82,002.00

SH FINISHING 9.00

INTERIOR FINISHING

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare

9.1 the surface even and smooth complete. sqm 290.00 262.70 76,183.00 13.26

Applying one coat of water thinnable cement primer of approved brand and manufacture on

9.2 wall surface : 13.43

9.2.1 Water thinnable cement primer sqm 290.00 64.45 18,691.00 13.43.1

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per

9.3 manufacturers specifications : 13.48

Digitally signed by AMIT

I.NO DESCRIPTION UNIT QTY RATE AMOUNT

Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special

LIGHTWEIGHT GYPSUM PLASTER

Providing and applying 12 mm thick (average) premixed formulated one coat gypsum

lightweight plaster having additives and light weight aggregates as vermiculite/ perlite

respectively conforming to IS: 2547 (Part - 1 & II) 1976, applied on hacked / uneven background

such as bare brick/ block/ RCC work on walls & ceiling at all floors and locations, finished in

9.4 smooth line and level etc. complete. sqm 169.00 468.90 79,244.00 13.78

MELAMINE CLEAR POLISH

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden

9.5 shade texture with following process in the sequence as detailed below: sqm 183.00 3,049.85 5,58,123.00 13.116

1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of

2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and

2nd coat is allowed to dry for 8 to 12 hrs.

3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to

remove excess sealer layer and make the surface further smooth after this wet rubbing, then

surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc.

Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this

surface is further allowed to dry for 12 hrs.

4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and

melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry

surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final

melamine polish is applied with compressor pressure spray gun using melamine clear polish and

melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge.

(Final coat to be done in 1 or 2 layers without gap of time.)

Total Carried Over to Abstract for Sub Head: 9.00 Finishing : 8,55,241.00

SH REPAIRS TO BUILDING 10.00

Digitally signed by AMIT

I.NO DESCRIPTION UNIT QTY RATE AMOUNT

Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including

cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with

white cement based polymer modified self curing mortar, including disposal of rubbish, all

10.1 complete as per the direction of Engineer-In-Charge. sqm 50.00 670.95 33,548.00 14.75

Total Carried Over to Abstract for Sub Head: 10.00 Repairs To Building : 33,548.00

SH DISMANTLING AND DEMOLISHING 11.00

DEMOLLITION OF BRICK WORK

Demolishing brick work manually/ by mechanical means including stacking of serviceable

material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-

11.1 in-charge. 15.7

DISMANTLING OLD PLASTER OR SKIRTING

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including

11.2 disposal of rubbish to the dumping ground within 50 metres lead. sqm 169.00 54.65 9,236.00 15.56

DISMANTLING ALUMINIUM FIXED GLAZING

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling

including disposal of unserviceable material and stacking of serviceable material with in 50

11.3 meters lead as directed by Engineer-in-charge. sqm 25.00 56.35 1,409.00 15.57

Total Carried Over to Abstract for Sub Head: 11.00 Dismantling And Demolishing : 20,637.00

SH ALUMINIUM WORK 12.00

ALUMINIUM FRAMING

Digitally signed by AMIT

I.NO DESCRIPTION UNIT QTY RATE AMOUNT

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded

built up standard tubular sections/ appropriate Z sections and other sections of approved make

conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including

necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/

neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed

mechanically wherever required including cleat angle, Aluminium snap beading for glazing /

paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the

directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately)

12.1.1 For fixed portion 21.1.1

Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868,

12.1.1.1 Minimum anodic coating of grade AC 15) Kg 112.00 495.05 55,446.00 21.1.1.1

Total Carried Over to Abstract for Sub Head: 12.00 Aluminium Work : 55,446.00

SH WATER PROOFING 13.00

INTEGRAL CEMENT BASED TREATMENT

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by

13.1 applying cement slurry mixed with water proofing cement compound consisting of applying :

(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @

0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.

(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement

compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water

curing for 48 hours.

The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of

pipes and masonry with polymer mixed slurry. sqm 12.00 617.05 7,405.00 22.5

Total Carried Over to Abstract for Sub Head: 13.00 Water Proofing : 7,405.00

SH NEW TECHNOLOGIES AND MATERIALS 14.00

Digitally signed by AMIT

I.NO DESCRIPTION UNIT QTY RATE AMOUNT

Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved

texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light

Reflectance ? 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476

pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round

galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of

15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary

intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm

suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm

outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm

length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along

The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of

size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl

plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion

of all T-sections used in false ceiling support system shall be pre-painted with polyester baked

paint, for all heights. The work shall be carried out as per specifications, drawings and as per

directions of the engineer-in-charge.

14.1.1 With 20 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.7) sqm 20.00 2,671.20 53,424.00 26.27.2

Total Carried Over to Abstract for Sub Head: 14.00 New Technologies And Materials : 53,424.00

Digitally signed by AMIT

ESTIMATE FOR CIVIL CONSTRUCTION

Proposed Refurbishment of 5th Floors for Railtel office at Office Block-1, East Kidwai Nagar,(New Delhi)

I.NO DESCRIPTION UNIT QTY RATE AMOUNT CODE

SH NON SCHEDULE ITEMS- BASED ON DELHI SCHEDULE OF RATES 15.00

DISPOSAL OF MALBA

Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by

mechanical transport including loading, transporting, unloading to approved municipal dumping

ground( C& D waste management site near Jahangir Puri Safai Karamchari Quaters at Burari Plant),

beyond 50 m initial lead, for all leads including all lifts involved, complete as per directions of Engineer-

Lead considered 30km (Lead intimated by EE J Division vide letter No. 24(12)/J-Div./2013/1866, dated

Note - Vehicle on road in day time is not allowed in delhi by Delhi Traffic Police from 8:00 AM to 9:00 PM.

In night efficiency of labour is reduced and in night working hours are less than day. Hence no. of trips

are reduced by half.

GYPSUM BOARD LINING

Providing and fixing of plain gypsum plaster board conforming to IS: 2095 Part - 1:2011 (Board with BIS

certification marks) to existing dry partition using metal to metal flat head screws, including jointing and

finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners

(25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's

15.2 specification and direction of engineer in charge all complete.. DAR-1.3

12.5 mm thick fire rated Glass Reinforced Gypsum (GRG) plaster board conforming to IS: 2095: part 3

15.2.1 (Board with BIS certification marks) sqm 255.00 763.25 1,94,629.00 DAR-1.3.1

12.5 mm thick tapered edged plain Gypsum plaster board conforming to IS: 2095: (part I): 2011 (Board

15.2.2 with BIS certification marks) sqm 185.00 571.75 1,05,774.00 DAR-1.3.2

COMMERCIAL PLY PLAIN LINING

Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved

primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-

15.3 in charge (Frame work shall be paid for separately). DAR-1.4

9mm thick Decorative plywood one side decorative veneer and commercial veneer on other face

15.3.1 (Type 1) conforming to IS 1328 BWR Type sqm 79.00 1,473.70 1,16,422.00 DAR-1.4.1

SS BALL BEARING HINGES

Digitally signed by AMIT

I.NO DESCRIPTION UNIT QTY RATE AMOUNT CODE

Extra for providing SS ball bearing hinges instead of ISI marked Stainless Steel butt hinges bright finished

15.4 of required size with necessary screws. (Shutter area to be measured). sqm 8.00 1,194.85 9,559.00 DAR-1.5

HIGH PRESSURE LAMINATED CEILING

Providing and fixing false ceiling at all height including providing and fixing of frame work made of

special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm

(both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with

flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash

fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers

of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger

fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to

centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26

mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction

perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm

15.5 long G.I. wire at every junction, DAR-1.7

including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long,

the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm

long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and

perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including a coat

of approved primer on one face, all as per manufacturer's specification and also including the cost of

making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably

fixed, all complete as per drawings, specification and direction of the Engineer in Charge but

excluding the cost of painting with :

12 mm thick marine plywood conforming to IS: 710, including fixing of decorative high pressure

laminated sheet 1mm thick of plain /wood grain in gloss / matt/ suede finish with high density

protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S

A using adhesive of approved quality sqm 21.00 2,621.60 55,054.00 DAR-1.7.1

Digitally signed by AMIT

I.NO DESCRIPTION UNIT QTY RATE AMOUNT CODE

Providing and fixing steps with treads of width 300mm and risers as 150mm using 12MM Thk. fire

retardant plywood make with necessary MS framework 50mm x50mmx6mm at the corners with

necessary supports at edges or as directed. The MS framework to be finished in approved fire rated

paint with necessary red oxide primer. The exposed edges of the steps to be finished in 19mm thick

Granite with 3M anti-skid strips. Mode of measurement to be running length of step, treads and risers will

not be paid separately.

Providing and fixing steps with treads of width 300mm and risers as 150mm using 12MM Thk. fire

retardant plywood make with necessary MS framework 50 mm x50 mmx1.6 mm at the corners with

necessary supports at edges or as directed. The MS framework to be finished in approved fire rated

paint with necessary red oxide primer. The exposed edges of the steps to be finished in 19mm thick

Granite with 3M anti-skid strips. Mode of measurement to be running length of step, treads and risers will

15.6 not be paid separately. sqm 1.20 21,720.70 26,065.00 DAR-1.8

TOUGHENED GLASS 12 MM THICKNESS

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM

rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of

15.7 engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): DAR-1.9

15.7.1 Toughened glass 12 mm thickness sqm 191.00 2,897.75 5,53,470.00 DAR-1.9.1

MARINE & FIRE RETARDANT PLY PLAIN LINING

Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including two coat of

approved Fire retardant paint on one face, and fixed on wooden /steel frame work, complete as per

15.8 direction of Engineer-in charge (Frame work shall be paid for separately). DAR-1.10

15.8.1 12 mm thick fire retardant plywood conforming to IS: 5509 sqm 0.55 1,621.25 892.00 DAR-1.10.1

15.8.2 12 mm thick marine plywood conforming to IS: 710 sqm 13.00 1,407.85 18,302.00 DAR-1.10.2

Total Carried Over to Abstract for Sub Head: 15.00 Non Schedule Items- Based On Delhi Schedule Of

SH NON SCHEDULE ITEMS- BASED ON MARKET RATES 16.00

DEMOUNTABLE DOUBLE GLAZED ACOUSTIC PARTITION

Digitally signed by AMIT

I.NO DESCRIPTION UNIT QTY RATE AMOUNT CODE

Providing and fixing, in position JEB ('X' SERIES DOUBLE GLAZED 105X25MM PARTITIONS SYSTEMS)/ DORMA

KABA(ALTERRA DEMOUNTABLE PARTITIONS) / ALLOY PARTITION/ OTIC PARTITION demountable double

glazed acoustic aluminium framed partition system of appropriate size and thickness (not less than 2

mm) having sound reduction value >45 Db, supporting height upto 2700mm with snap on option for

installating glass, the aluminium quality as per grade 6063 T5 or T6 as per BS 1474, including anodising up

to 15-20 microns of required colour and shade, accessories ie 'T' section, corner section & vertical "I"

section between glass to glass ,glass packing to adjust the floor level, ceiling profile, floor profile and

wall profile as per the manufacturer specification( The item includes cost of material such as cleats,

sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be

paid on this account), all complete as per the architectural drawings and approved shop drawings , &

16.1 directions of engineer-in-charge. MR-2.1

16.1.1 For fixed portion

Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum

Providing and fixing of single glazed style door shutters including providing and fixing hinges/ pivots and

making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene

18.1.2 gasket required (Fittings shall be paid for separately) MR-2.1.2

Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum

18.1.2.1 anodic coating of grade AC 15-Area of door upto 2.50 sqm) sqm 67.00 20,699.40 13,86,860.00 MR-2.1.2.1

D TYPE OFFSET PULL HANDLE

Providing and fixing stainless steel Grade 304 Assa Abloy/ Geze/ Dorma TGDI D type Offset Pull Handle

600 mm long, bar outer dia 25 mm, center to center 600 mm, Back to back fixing with suitable fixing

16.2 accessories etc .complete as per direction of Engineer-in-Charge each 28.00 5,255.05 1,47,141.00 MR-2.2

NARROW STILE MORTISE LOCK WITH EPC

Providing and fixing Assa Abloy/ Geze/ Dorma 917 Narrow stile mortise dead lock having 35 mm

Backset including Euro Profile Cylinders with Both Side Key - 70 mm (best make of approved quality) for

16.3 glazed aluminium auoustic doors including necessary cutting and making good etc. complete. each 28.00 6,327.65 1,77,174.00 MR-2.3

SLIDE CHANNEL DOOR CLOSER

Digitally signed by AMIT

I.NO DESCRIPTION UNIT QTY RATE AMOUNT CODE

Providing and fixing Assa Abloy/ Geze/ Dorma TS 70 aluminium extruded section body slide channel

door closer, closing force adjustable size EN 3–4(door weight upto 36 kg to 80 kg and door width from

701 mm to 1100 mm), tested according to EN 1154 with necessary accessories and screws etc.

MORTISE LOCK WITH EPC FOR TOILET

Providing and fixing Assa Abloy/ Geze/ Dorma 285 WC mortise dead lock having 55-80 mm Backset, CE

certified Approved for fire-rated doors including Strike Plate (best make of approved quality) for glazed

16.5 aluminium auoustic doors including necessary cutting and making good etc. complete. each 5.00 2,421.40 12,107.00 MR-2.5

Providing and fixing stainless steel Grade 304 Assa Abloy/ Geze/ Dorma TDLH 8100 Lever Handle with

6501 Roses,6612 Escutcheons,8mm Spindle with Fixing Screws for door thickness 35-55 mm, Back to back

16.6 fixing with suitable fixing accessories etc .complete as per direction of Engineer-in-Charge each 5.00 2,397.30 11,987.00 MR-2.6

ACRYLIC SOLID SURFCES

Providing and fixing acrylic solid surfces made with non-porous, homogeneous material maintaining the

same composition throughout the part with a composition of acrylic polymer, aluminum trihydrate filler

and pigment resin, having tensile Strength of 6000 psi min as per ASTM D638, tensile modulus 1.5 x 106

psi min as per ASTM D638, tensile elongation 0.4% min. as per ASTM D638, flexural strength of 10000 psi

min as per ASTM D790, Flexural Modulus of 1.2 x 106 psi min as per ASTM D790, hardness >85-Rockwell

"M" scale min. as per ASTM D785, thermal expansion 2.2 x 10-5 in./in./°F as per ASTM E228, Does not

support microbial growth as per ASTM G21 & G22, Highly resistant to mold growth as per UL 2824 for

kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved

shade, colour and texture laid over clear silicon, joints treated with approved manufacture adhesive,

mixed with matching pigment, touch ups, including rubbing, curing, moulding and polishing to edges

16.7 to give high gloss finish etc. complete at all levels. MR-2.8

16.7.1 12mm thick acrylic solid surfces sheet, White, Ivory, concrete grey, etc. MR-2.8.1

Digitally signed by AMIT

I.NO DESCRIPTION UNIT QTY RATE AMOUNT CODE

Providing edge moulding to 12mm thick acrylic solid surfces sheet, counters, Vanities etc., including

machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-

16.8 in-Charge. MR-2.9

16.8.1 12mm thick acrylic solid surfces sheet, White, Ivory, concrete grey, etc. metre 6.00 461.45 2,769.00 MR-2.9.1

Extra for fixing 12mm thick acrylic solid surfces sheet, White, Ivory, concrete grey, etc., over and above

corresponding basic item, in facia and drops of width upto 300 mm with epoxy resin based adhesive,

16.9 including cleaning etc. complete. metre 6.00 1,030.20 6,181.00 MR-2.10

UNDERCOUNTER BASIN/SINK OPEINING

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform,

vanity counter and similar location in acrylic solid surfces sheet work, including necessary holes for pillar

16.10 taps etc. including moulding, rubbing and polishing of cut edges etc. complete. each 2.00 916.50 1,833.00 MR-2.11

MDF SOLID PLAIN BOARD JALI

Providing and fixing factory made 12 mm thick MDF (Medium Density Fiber) solid plain board Jali

finished with one side fixed using decorative high pressure laminated sheet 1mm thick of plain /wood

grain in gloss / matt/ suede , CNC (Computer numeric control) routed of approved design by Engineer-

in -charge which are machine cut for column cladding and partitions, fixing on anodised Aluminium

frame made of 25 x 25 x 1.5 mm square hollow box section, placed at grid made at 0.3 x 0.3 m or as per

requirement at site with necessary stainless steel fasteners and SS screws etc., all complete as per

direction of Engineer-In- Charge. (Note: Aluminium framework and necessary SS fasteners and SS screws

16.11 shall be paid separately) sqm 19.00 2,167.60 41,184.00 MR-2.11

Providing and fixing wooden batterns 72 mm x 112 mm x 2.5 m high made up of plywood 4 mm thick,

one side decorative veneer conforming to IS: 1328 (type-1) over and above 12 mm thick marine ply

plain lining / cladding and fixing the layers on M.S (mild steel) frame made of 40 x 80 x 2.6 mm square

hollow box section including applying a priming coat of approved steel primer, priming coat on

unexposed surface of ply,Polishing in high gloss/matt finish melamine clear polish on wood work in

required color/wooden shade, fixing to floor and ceiling using 150x150x6mm thick plate, with necessary

16.12 screws, fastners etc., all complete as per direction of Engineer-In- Charge. Refer Drawing No. AR-D-45 each 20.00 4,320.95 86,419.00 MR-2.12

Digitally signed by AMIT

I.NO DESCRIPTION UNIT QTY RATE AMOUNT CODE

LACQURED FACING

Providing & fixing 6 mm thick annealed SCG Planilaque Evolution (premium GRIHA rated lacquered

glass i.e. textured from saint gobin) with flat polished edge fixed to 5.5 mm thick plain MDF board

backing with neutral silicone and/or double-sided adhesive pads etc. ,including polishing/MTG all

16.13 complete as per the drawing & directions of engineer-in-charge. MR-2.14

WALL PAPER FACING

Providing & fixing fabric backing commercial grade wall paper of approved shade to MDF/Gypsum

board/POP Punning base backing which have 100% washable, scratch resistance, peel proof, and fire

retardant properties, including preparation on the punned surface for receiving the wall paper,

adhesive as per the manufacturer specification, all complete as per the drawing & directions of

16.14 engineer-in-charge( Base backing to be paid separately). sqm 125.00 3,362.25 4,20,281.00 MR-2.15

SH FLOORING 1.00

VITRIFIED WALL TILES

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with

water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours &

shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand),

jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement &

matching pigments etc. complete.

Providing and laying of 2mm conductive Vinyl rolls as specified and indicated. The cost to include

preparing surface to receive vinyl flooring requirements like the floor to be absolutely leveled, hard,

dried, even and free from dirt, grease, moisture , and fixed using required adhesive ( water based

adhesives like Arobond 44 of Colourbond mktg/VC 31 of Pidilite Ind. ) and correct laying technique. The

make of vinyl flooring shall be of Armstrong or equivalent of which the specs / samples have to be

16.16 submitted for approval.

Flammability : B1 Class

Sound Absorption : 3 dB

Sheet width/length : 180/16-25 cm/m

Digitally signed by AMIT

I.NO DESCRIPTION UNIT QTY RATE AMOUNT CODE

Tile side length : 60.8/60.8 cm/cm

Total wt : 2.9 kg/m2

Colour fastness : 6 stage

Electrostatic loading limit : <2 Kv

Thermal resistance : 0.010 m2K/W

CARPET TILE FLOORING

Providing & fixing of Tufted / Textured / Graphic Loop Pile Carpet Tile flooring of approved make &

shade for Medium- Heavy duty Commercial applications, having pile height of 9mm, tufted Weight of

24-26 oz/yd2, average density >7,000 oz/yd3 , 100% Solution Dyed, 8.0 Stitches per Inch, 0.112 in

Finished Pile Thickness, Primary Backing of non-woven Environment friendly, Recyclable, PVC Free, with

high recycled content material. Fiberglass Reinforced Thermoplastic Composite Secondary Backing

containing not less than 39% post consumer and/or post industrial material content, Soil Protection,

Class I Radiant Panel confirming to ASTM E 648, NBS Smoke < 450 confirming to ASTM E 662, Must pass

both Part 2 and Part 3 of AATCC 174 with a minimum of 90% reduction both gram negative and gram

positive bacteria and no macroscopic growth against the fungi., Built-in Permanent Conductive Fiber

Electrostatic Propensity of Less Than 3.5 kV, including covering of the laid carpet with 1mm. Thk plastic

sheets, with proper taping of the joints and shampooing of the carpet prior to handover all complete as

16.17 per the approved manufacturers specification and as per the direction of Engineer-in-charge. MR-2.20

SELF LEVELLING SUBSTRATE

Providing and fixing one part, polymer modified, trowel & pumpable self levelling fast hardening

cementitous underlayment substrate having layer thickness not more than 5 mm for carpets, linoleum,

PVC sheet or carpets Compressive Strength after 28 days >25 N/mm², Tensile Strength in Flexure after 28

days > 5 N/mm2 (+23°C), Consumption 1.6 kg/m²/mm, including cleaning the surface of all dirt, scales,

16.18 oil, grease and foreign material etc. complete. sqm 140.15 488.50 68,463.00 MR-2.21

Digitally signed by AMIT

I.NO DESCRIPTION UNIT QTY RATE AMOUNT CODE

Providing and fixing 14mm/15mm thick engineered hardwood flooring with 3mm/4mm real wood wear

layer (e.g., Oak/Walnut) of approved species and shade, approved make (e.g., Armstrong, Pergo, or

equivalent). The flooring should have a multi-ply/HDF core, tongue and groove locking system, and UV-

lacquered finish. Installed over a 2mm thick anti-microbial underlayment on a flat, dry subfloor

(\(<8\%\) moisture content) including all necessary cutting, wastage, and waste disposal.

SH FALSE CEILING 1.00

MINERAL FIBRE FALSE CEILING

Providing and fixing mineral fibre false ceiling tiles at all heights of size 300X1200mm of approved

texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ?

85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7), suitable

for Green Building application, with Recycled content of >35% in true horizontal level suspended on

interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120

gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length

1200 mm to form grid module of size 300x1200 mm suspended from ceiling using galvanized mild steel

item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully

threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at

16.20 1200 mm centre to centre along main ‘T’. MR-2.22

The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of

size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug

at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-

sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all

heights. The work shall be carried out as per specifications, drawings and as per directions of the

engineer-in-charge.

A With 20 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.9) sqm 170.80 2,809.90 4,79,931.00 MR-2.22.1

SH SANITARY INSTALLATIONS 1.00

VERTICAL LINEAR BAFFLE CEILING

Digitally signed by AMIT

I.NO DESCRIPTION UNIT QTY RATE AMOUNT CODE

Providing and fixing Baffle Ceiling System false ceiling at all heights of approved texture, design and

pattern. The baffle fixed with end cap at terminals and intermediate connector piece at joints in true

horizontal level suspended on interlocking Grid of hot dipped all round galvanized iron section of

0.8mm thick (galvanized @120 gsm) comprising of main Baffle carrier of 23X34mm 0.5mm thick of length

3000 mm, cross Secondary C Channel (40mm x 0.8mm thick with two flanges of 15mm & 20mm) of

length 3000 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm

long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm

length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main

‘Baffle carrier’.The work shall be carried out as per specifications, drawings and as per directions of the

16.21 engineer-in-charge. MR-2.46

Note: All support carriers to be powder coated with approved color

METAL BAFFLE CEILING

16.21.1 25mm wide 100 mm high 0.07mm thick powder coated aluminium at 150mm center to center sqm 50.00 5,832.05 2,91,603.00 MR-2.46.1

ACOUSTIC BAFFLE CEILING

PET Acoustic Baffle 12mm width, 150mm height of length not more than 2400 mm,with a thickness of

16.21.2 Baffle felt 3-5mm in approved colour at 150mm center to center, NRC of upto 0.5 sqm 7.10 5,945.00 42,210.00 MR-2.46.2

SKIRTING & TRIMS

Providing and fixing aluminium extruded trim/skirting profile sections 100 mm High, thickness not less

than 2mm, as per the architectural drawings and approved shop drawings , the aluminium quality as

per grade 6063 T5 or T6 as per BS 1474,including Anodised aluminium (anodised transparent or dyed to

required shade according to IS: 1868, Minimum anodic coating of grade AC 15) as approved by the

Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary

16.22 for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). meter 220.00 500.00 1,10,000.00 MR-Code

ACOUSTIC PANELS 9MM THICKNESS (NRC) 0.94

Digitally signed by AMIT

I.NO DESCRIPTION UNIT QTY RATE AMOUNT CODE

Providing & fixing acoustic panels any size and shape in approved color and code no. with Standard

size & 9mm thickness. acoustic Panels should have Sound Absorption coefficient (NRC) 0.94.

Formaldehyde emission standards of GB18580-2001 class E1, it is a green material with asbestos-free,

non-toxic and tasteless gas under extreme temperature, protecting the ozone layer, non-irritant and

recyclable. acoustic panels have to be Fire-resistant . Good insulation properties, to prevent

transmitting the heat from outdoor to indoor directly as partition or and ceiling, saving 35% of energy,

extending the life of air conditioning. acoustic panels are Light weight and allow free cutting with

UNDERCOUNTER/OVER HEAD/ FULL HEIGHT STORAGE

Designing, fabricating, installing and fixing in position custom made in marine plywood conforming to

IS: 710 undercounter storage, overhead storage or full height storage carcass and shutter of approved

design with one side decorative and other side balancing 1.0mm thick lamination, as per the

Architectural drawings, including providing and fixing fixing with stainless steel soft close auto closing

spring loaded hinges (hydraulic type), Stainless steel soft closing heavy type stainless steel telescopic

drawer channels of approved make and required size with necessary full body threaded star headed

counter sunk S.S screws, fixing all exposed edges with 2mm thick PVC edge banding tape with hot glue

by edge bending machine etc. as per item description, as specified, as per the approved shop

drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the

actual area on the external face of the shutter with drawer facia (including width of groove) shall be

MR-02 measured in sqm. up to two decimal places.

18mm thick marine plywood conforming to IS: 710 for carcass, partition, shelf and shutter of cup boards, A

work stations and bathroom/ kitchen cabinet etc. of required sizes

6mm thick marine plywood conforming to IS: 710 for backing of full height cup boards, workstation and B

bathroom/ kitchen under counter cabinets

12mm thick marine plywood conforming to IS: 710 for backing of overhead cup boards and bathroom/ C

kitchen over head cabinets etc.

12 mm thick marine plywood conforming to IS: 710 for drawer, including bottom cover of 6 mm D

commercial ply wood conforming to IS: 303 BWR grade, all complete.

The unexposed face of plyboard which are coming in contact of wall/partition to be apllied with a E

coat of approved primer instead of of decorative laminated sheet.

OVERHEAD STORAGE

Digitally signed by AMIT

I.NO DESCRIPTION UNIT QTY RATE AMOUNT CODE

Overhead storage with 600mm high 400mm deep carcass divided by vertical partitions placed not

more than 1000mm center to center and equally divided into two half by a detachable shelf 365mm

deep laid horizontally, including 12mm thk back ply, 700mm high shutter not more than 500mm wide

hanging 100mm at bottom fixed with 2nos. 3D Auto Soft-Close Concealed Hinges, provisional boxing for

cove light, as per the Architectural drawing no AR-D-05, as per item description, as specified, as per the

approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of

payment, only the actual area on the external face of the shutter with drawer facia (including width of

MR-02.1 groove) shall be measured in sqm. up to two decimal places. sqm 5.00 20,289.55 1,01,448.00 MR-2.52.1

Overhead storage with bottom open shelf 600mm high 400mm deep carcass divided by vertical

partitions placed not more than 900mm center to center and equally divided into three parts by shelf

laid horizontally, including 12mm thk back ply, 425mm high shutter not more than 450mm wide hanging

25mm at bottom with 2nos. 3D Auto Soft-Close Concealed Hinges , provisional boxing for cove light, as

per the Architectural drawing no AR-D-09, as per item description, as specified, as per the approved

shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only

the actual area on the external face of the shutter with drawer facia (including width of groove) shall

MR-02.2 be measured in sqm. up to two decimal places. sqm 1.05 34,066.50 35,770.00 MR-

UNDERCOUNTER STORAGE

Overhead storage with 800mm high 600mm deep carcass divided by vertical partitions placed not

more than 1000mm center to center and equally divided into two half by 565mm deep detachable

shelf laid horizontally, including 12mm thk back ply, 665mm high shutter not more than 500mm wide

fixed with 2nos. 3D Auto Soft-Close Concealed Hinges, provisional 75mm high skirting, IInd class teak

wood finger pull arrangement of 25 mm wide x18 mm thick with necessary screws, as per the

Architectural drawing no AR-D-05, as per item description, as specified, as per the approved shop

drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the

actual area on the external face of the shutter with drawer facia (including width of groove) shall be

measured in sqm. up to two decimal places.(Counter finish in acrylic solid surface/granite will be paid

MR-02.3 seperately in respective items.) sqm 5.00 25,425.15 1,27,126.00 MR-2.52.3

DEDUCT FOR SHELF

MR-02.4 Deduct for not providing shelf 600mm deep in the under counter storage meter 2.50 -1,995.05 -4,988.00 MR-2.52.4

Digitally signed by AMIT

I.NO DESCRIPTION UNIT QTY RATE AMOUNT CODE

Add extra for providing drawer unit 100mm high 600mm deep with 200mm high facia in 18mm thick ply

inspite of shelf in the under counter storage, including IInd class teak wood finger pull arrangement of

MR-02.5 25 mm wide x18 mm thick with necessary screws and sqm 1.30 2,840.55 3,693.00 MR-2.52.5

FULL HEIGHT STORAGE

Full height storage with 2400m high 600m deep carcass divided by vertical partitions placed not more

than 1000mm center to center and equally divided by horizontal shelves 565mm deep laid horizontally

at not more than 400mm center to center, including 6mm thk back ply, 2325mm high shutter not more

than 500mm wide fixxed using 4 nos of 3D Auto Soft-Close Concealed Hinges per shutter, 75mm high

skirting at base, 100mm high facia at top fixed using 25mm x 25mm Kiln seasoned and chemically

treated hollock wood frame, as per the Architectural drawing no AR-D-46/46A/46B, as per item

description, as specified, as per the approved shop drawings and as directed by the Engineer-in-

Charge. However, for the purpose of payment, only the actual area on the external face of the shutter

MR-02.6 with drawer facia (including width of groove) shall be measured in sqm. up to two decimal places. sqm 13.85 17,604.30 2,43,820.00 MR-2.52.6

MEETING ROOM CREDENZA

Meeting Room Credenza: Meeting Room Credenza of size 500-600deep x 800 high made up of 19 mm

thk. Backing ply & 1mm thk. laminate finished top and sides,shutters etc. cost to be inclusive of louvers

shutters complete with necessary hardaware and fittings as design & Drawing. Mode of measurement

will be front facia.

MR-02.8 SAME AS ABOVE BUT FINISHED WITH 4MM THK VENEER meter 5.55 26,960.20 1,49,629.00

Digitally signed by AMIT

I.NO DESCRIPTION UNIT QTY RATE AMOUNT CODE

Designing, fabricating, installing and fixing in position custom made library rack cum display divider

rack of overall length not exceeding 5000mm, depth 400mm, and height 2100mm, with 19 mm thick

marine plywood conforming to IS: 710 of approved design with one side 4mm thick decorative veneer

conforming to IS: 1328 (type-1) and other side balancing 1.0mm thick high pressure laminated sheet,

including fixing on Polyester powder coating 50 microns M.S (mild steel) frame made of 50 x 25 x 3.2 mm

rectangle hollow box section placed at 625mm center to center or as per requirement at site with

necessary stainless steel fasteners and SS screws etc., providing and fixing teak wood lipping of size 25x3

mm to the exposed edges, applying matt finish melamine clear polish as per DSR 2021 ITEM No. 13.116,

all complete as per the Architectural drawing no AR-D-42, as per item description, as specified, as per

MR-03 the approved shop drawings and as directed by the Engineer-in-Charge. each 2.00 1,79,785.25 3,59,571.00

LOOSE FURNITURE

Note: All Hardware to be of DORMA / Hettich / Haffle / D-Line make. All samples to be submitted for

approval from the architect / designer, all exposed faces should have laminate and unexposed faces

should have balancing laminate. All vennered surfaces should be PU polished.

Providing & fixing continuous Sofa in conference & dining area in Fabric finish with laminate finished

base structure & necessary hardwood & plywood framing . Foam ( Medium firm) density should be 33

MR-04 lbs / cuft. Cost inclusive of Fabric as shown in image below . Size :700mm for 1 seat. seat 20.00 15,197.00 3,03,940.00

Reception Table 2400x750x1050mm

Providing and fixing of reception desk lower level at 750mm height formed out of 19mm marine

plywood confirming to IS 710, exposed surface shall be finished in approved shade of Stone surface, as

per details and Designs. The table shall be cladded with 18mm thick Stone surface along the

edges/Fascia made of 50mm thick ply boxing frame work bent to shape as per design and drawing.

This shall also consist of Ply Box of Size 650mmx800mm @ 825mm level height from FFL. Made using 19mm

thick ply box frame work, finished with 18mm thick Stone surface surface.The internal surfaces and

MR-05 table top shall be finished with laminate surface as per approval.

Digitally signed by AMIT

I.NO DESCRIPTION UNIT QTY RATE AMOUNT CODE

300mm wide upper counter top at 1050mm level - Table top shall be formed out of 12mm thick

approved corian on ply boxing frame work bent to shape as per design and detail . The table shall be

cladded with 18mm thick Stone surface on all sides as per design and detail.

The facia to be finished in corian as per detail drawings.

The table to have in built 2 no drawer pedestal finished with laminate of approved colour and shade

as per details.Drawer to be complete with hardware installed as directed to consist of the following: 1

no multi purpose lock as specified, Telescopic channel, etc., complete as per details and Consultant's

Provision for mounting of switch sockets & cove light to be made. Base Rate of stone 8000/- Sqm

Note : Please refer image while quoting for the same each 1.00 1,36,014.10 1,36,014.00

Security table Table

Providing and fixing of l shape Security desk lower level at 750mm height formed out of 19mm ply

framework, exposed internal surface shall be finished in approved shade of corian surface, as per

details and Designs. The table shall be cladded with 18mm thick Stone surface along the edges/Fascia

made of 50mm thick ply boxing frame work bent to shape as per design and drawing. This shall also

consist of Ply Box of Size 650mmx800mm @ 825mm level height from FFL. Made using 19mm thick ply box

frame work, finished with 12mm thick corian surface surface.The internal surfaces and table top shall

MR-06 be finished with laminate surface as per approval.

300mm wide upper counter top at 1050mm level - Table top shall be formed out of 8mm thick

approved corian on ply boxing frame work bent to shape as per design and detail .

The facia to be finished in corian as per approved sample in curved profile.

The table to have in built 1no drawer pedestal finished with laminate of approved colour and shade as

per details.Drawer to be complete with hardware installed as directed to consist of the following: 1 no

multi purpose lock as specified, Telescopic channel, etc., complete as per details and Consultant's

Digitally signed by AMIT

I.NO DESCRIPTION UNIT QTY RATE AMOUNT CODE

Core Cutting with HILTI Core Cutting Drill in RCC for following size including repair with m 25 grade micro

MR-07 concrete leak proof:

MR-08 Supplying & Placing of 24" Hybrid Polyber planters sample as approved by client. sqm 25.00 5,798.00 1,44,950.00

Artificial Vertical Green Wall Plant/ Ceiling suspended Creepers Bunch:

Size: 40cm x 60cm, 40cm x 90cm, 50cm x 50cm

Patterns: As per Approved by client & architect.

Providin & fixing Artificial silk plants with combination 3 or 4 types uniformaly ditributed plants on wall as

well as ceilig suspended creepers with necessary wire or hangin arranement included. Plants which

ultraviolet blocking chemicals are impregnated into the materials during the manufacturing process.

These chemicals are blended with the plastic or PVC parts Installation Installation is done on Waterproof

MR-09 ply board with staple gun machine. sqm 7.40 6,156.00 45,554.00

NATURAL MOSS BREATHING PANLES (NORDGRONA PIXELS)

Supply of NATURAL MOSS BREATHING PANLES . Each panel is 5 x 5 x 6 cm and weighs 30 g. The panel is a

high-class sound absorber made from natural, hand-picked Moss. The panel element is designed to

cover large surface areas with maximum flexibility in shape and design. Each Pixel element retains its

colors, is fire-proof, absorbs & releases humidity to remain soft, and is completely maintenance-free. Per

MR-10 sqm requires 400 pxl sqm 15.20 10,024.00 1,52,365.00

Supplying and fixing Roller Blinds to the following specifications , Fabric shade as approved, sunscreen,

dense basket weave 5 % openness factor. Operation: - Manual. Offset side-mounted metal chain

operated Mounting: Pocket mounted. Shade Orientation: Regular roll, shade cloth falls at window side

of roller. Configuration: Single band AVERAGE LENGTH OF BLIND is 2.0 M to 2.5 M. The fabric to be Fire

Retardent certified.

BLACKOUT ROLLER BLINDS

MR-12 Supplying and fixing of Blackout blinds to the following specs.

Digitally signed by AMIT

I.NO DESCRIPTION UNIT QTY RATE AMOUNT CODE

Black-out material fibre-glass coated fabric, 12 mils thick, 62 threads per sq in., 0.750 lbs per sq in. (441g

Operation: - Manual. Offset side-mounted metal chain operated

Mounting: Closure Box in metal

Shade Orientation: Regular roll, shade cloth falls at window side of roller

Configuration: Single band

The Fabric to be as per approved sample (Fabric should be Fire Retardent Certified). Sqm 3.00 3,726.00 11,178.00 MR

Cellular Semi Opaque 100% Polyester Hardware SpecificationHeadRail: Head rail is 17 mm high and 47

mm wide, Thickness 1.00 mm. It is made up of powder coated high strength aluminum alloy covered by

two end caps made up of PVC.Drum & Cradle: They are molded ABS components with high strength

metalic drum which are meant for controlling the lifting cord.Bottom Rail: This is Aluminum Extruded Rail

Made up of High Strength Aluminum alloy, Which is powder coated in white.Installation Bracket: It is

made up of mild steel with zinc plate.Bottom Rail End Cap: It made up of high strength ABS.White Cord:

It is made of Nylon braided non stretchable thread of 1.2 mm thickness.PVC Slip : It is made up of high

strength PVC of width 25 mm.Fabric: 100% spun bonded non‐woven polyester translucent fabric Pleat

dimension 3Ú4” hexagonal cell with a distinct air pockets Sanitized, Weight : 145 + 5% GSM, Thickness :

MR-13 0.14 ‐0.17, colour fastness of light – 4‐5 Grade ( DIN EN ISO105‐B02). SQM 55.45 4,985.00 2,76,418.25 MR

S-contour blind Roller Tube: Made up of High Strength Anodized Aluminum alloy Extruded grooved tube.

Size: 40 mm outside diameter (+ 2%); weight = 220gms/running mtr. Control Unit with Clutch Mechanism:

The control unit is made of high strength reinforced plastic. The clutch is of warp spring design. High

carbon steel springs are provided to transmit motion from the driven mechanism. Clutch is operated

directionally by the use of beaded endless chain to raise and lower the blind smoothly to decide

height. Idler: Idler is of high strength reinforced plastic, consisting of an outside sleeve and center shaft.

Sleeve provide bearing surface for center shaft and rotate freely, providing smooth, quiet and long

wearing operation. Bottom Rail: This is made up of high Strength Aluminum alloy Extruded tube, which is

powder coated in white. Size: 51 + 1mm Width. ; Weight = 215 gms/running mtr (5%).Fabric : composition

MR-14 100% polyester &fabric width 275 cm . SQM 9.00 8,437.00 75,933.00 MR

MR-14.1 Providing & fixing Motor Mechanism nos 5.00 24,757.00 1,23,785.00 MR

MR-14.2 Providing & fixing Motor Remote 16 channel nos 5.00 17,762.00 88,810.00 MR

Digitally signed by AMIT

I.NO DESCRIPTION UNIT QTY RATE AMOUNT CODE

WALL PAPER,GRAPHIC & FILM WORK

Digitally signed by AMIT

I.NO DESCRIPTION UNIT QTY RATE AMOUNT CODE

Providing and fixing fabric backing commercial grade wall paper of approved shade with

recommended adhesive of approved make which have 100% washable, scratch resistance, peel

proof, and fire retardant properties. Cost to include preparation on the punned surface for receiving

MR-15 the wall paper as per the manufacturer specification VASCOM colour choice series 138 50.00 3,012.00 1,50,600.00 MR

SCOTCHCAL FROSTED CRYSTAL

Providing & Fixing 3M & equivalent Frosted Translucent, cast PVC, self-adhesive vinyl, special CRYSTAL-

effect film to reproduce Sand-blasting effect on glass with customized designs, thickness of 2 mil

(0.05mm) without adhesive & 3M & equivalentil (0.8)with adhesive having minimum tensile strength of

3.5 pound/inch at 73 F(0.6 kg/cm at 23 C). Adhesion after 24hrs of installation should be 4 pounds/inch

(0.7 kg/cm) on Acrylic, Glass Polycarbonate: MCS warranty of 3yrs (if exposed to direct sunlight) to 15yrs

(indoors) must be endorsed by 3M & equivalent India Limited Architectural Market Department. Code

Application - DECORATIVE/PRIVACY FILM ON GLASS

Electronically/computer plotter cut. Applied on glass and other rigid, clear substrates. (partitions, doors,

MR-16 windows etc.) Available in 5 colours Sqm 50.00 2,421.00 1,21,050.00 MR

SCOTCH PRINT CONTROLTAC & COMPLY WALL GRAPHICS

Providing & Fixing Digitally reproduced 3M & equivalent Scotch print decorative graphics on IJ180C

(with controltac & comply feature for direct, bubble-free application on walls) with UV protective matte

over laminate 8520 with a polyethylene-coated paper liner. Customized imagery & the thickness of 2

mil (0.05mm) without adhesive & 3-4mil (0.8-0.10mm) with adhesive, having minimum tensile strength of

5 pounds/inch at 73°F (0.9 kg/cm at 23°C ). the adhesive should be Pressure activated, position able,

with air release channels. MCS warranty of 5yrs must be endorsed by 3M & equivalent India Limited

Architectural Market Department.

Application - WALL MURAL-Directly pasted on POP finish wall Conformable & durable decorative

graphics directly applied on walls, ceilings, elevator doors, partitions, pillars, aluminum cladding

MR-17 etc.Note : Cost of approved image included. Sqm 20.00 2,500.00 50,000.00

Digitally signed by AMIT

I.NO DESCRIPTION UNIT QTY RATE AMOUNT CODE

Supplying and fixing of Room Signages in imp.aluminum profile with 3 mm acrylic pictograph printed

MR-18 on canvas (Room Names) - Include braile letterings Size is 6"x10". Nos 33.00 762.00 25,146.00 MR

MR-19 Fire Exit ID - 4mm thk. Acrylic base with autoglow vinyl cut letters. 14"x8".Include braile letterings Nos 10.00 612.00 6,120.00 MR

Fire Extinguisher Signage -Providing and fixing graphical Triangular signage for fire extinguisher. signage

to be made of 3M & equivalentm thick foam board with edge to edge self adhesive self-luminescent

Forex or equivalent vinyl stuck on it. Fix Green vinyl to cover Forex vinyl leaving 6mm border around

edges with 'FIRE EXTINGUISHER' letters cut-out. (Note : 'FIRE EXTINGUISHER' letters to be self-luminescent

MR-20 and not the background). 'FIRE EXTINGUISHER' letters height shall be 100mm in HT. 153 X 153 Nos 10.00 572.00 5,720.00 MR

MR-21 Advisory / notice signage - 4mm thk. Acrylic base with autoglow vinyl cut letters. 19"x8" Nos 5.00 772.00 3,860.00 MR

MR-22 Providing and fixing SS PUSH/PULL signage for all doors. Size 2"x 6" Nos 28.00 512.00 14,336.00 MR

Providing and fixing evacuation maps of size A3 size, signage shall be made of 3M & equivalentm thk

foam board on to which on to which evacuation plans printed on coated paper shall be stuck. The

signage shall be laminated including the edges. (Note: soft copy of the signage shall be provided by

MR-23 architect). signage shall be fixed with 3M & equivalent double sided adhesive tape. A3 Nos 8.00 6,013.00 48,104.00 MR

Providing and fixing of IN CASE OF FIRE USE STAIRS' photo luminescent sign size: 10"x10"mm I sign

MR-24 aluminum profile with 3M & equivalentm acrylic Nos 1.00 552.00 552.00 MR

Digitally signed by AMIT

I.NO DESCRIPTION UNIT QTY RATE AMOUNT CODE

Manufacturing, providing and Placing Compactor of approved make and sample. Mobile Storage

wherein each body should be of dimensions (915mm(W)x460mm(D)x1980mm(H

) +-10% of following configuration and specification consisting of One no.Fixed Single one side

openable Unit & One, one end single openable mobile unit & between the Main Fixed unit & end

mobile unit having single/ double side mobile unit. The System shall be modular & movable type(Knock

Down) with 4-5 loading levels. Each Shelves loading capacity should be 50-55 kg. Each unit shall be

connected from the End back with the Dust proof arrangement with the help of Tong and Groove

system arrangement . Handle shall be made of ABS in round type with Dia of 350mm minimum with a

safety lock System at the Centre. channel of compactor shall be U – Channels formation to carry more

weight and to get more rigidity. Mechanical arrangement shall be concealed inside the System, only

MR-25 handle shall be installed at the outer Sheet of the Compactor as Shown in the Drawing.

The component specification shall be as follows. channel U - Section: Section shall be minimum 1.0mm

thk. Material Thickness : 0.8mm; Under Carriage Frame - HR sheet 2.5mm thick. channel Post: U - Shaped

Post. Wheel: Iron die casting with anti-rust coating, Loading : 950- 1000kg/Wheel There shall be central

locking system with wire, handle lock, Rail lock Plate & Rail Lock assembly in the chain box cover.

The material used for the system shall be as per following standards:- Steel CRCA IS - 513 D HR 10748 All

steel component shall be given 7 tank ntirust Phosphting treatment and to shall be Powder coated and

baked at 200o centigrade with 60 -70 microns quoting thickness. All

steel components shall be given a thorough antirust treatment. Product should be BIFMA gold rated

SCSglobal certified for inhouse air quality and with 5 years warranty Nos 3.00 3,90,417.76 11,71,253.27

1 Supply of Compactor Storage System as per plan Bay Arrangement:-

The Compactor Storage System to be an efficient space saving storage arrangement catering to a

variety of office storages requirements. It should consist of storage units of 457 mm deep movable –

bolted to undercarriage which rolls onto the channels, which, are firmly embedded to the ground.

Each of above configurations to have following type of blocks –

Twin Mobile - 2 bodies back to back.

(Note: Unless otherwise specified, all dimensions mentioned here under are in mm and represent

Digitally signed by AMIT

I.NO DESCRIPTION UNIT QTY RATE AMOUNT CODE

Main Body: a) Construction:

The overall construction of the main body to be rigid Knock Down construction made out of 0.8 thk.

CRCA steel conforming to IS: 513 Gr.D. Each body block (ASSESSMENT/SL/TTM) building should consists of

1 Main unit & then Add-on units (0,1,2,3,4 – depending on no.of bays 1,2,3,4 & 5) Each unit to have 5

loading levels formed by adjustable shelves. Body units are bolted to undercarriage.

Compactor Height from ground to be provided as 2100 mm (2100 mm total body (1970 mm ) + 100 mm

undercarriage + 30 mm Roundbar System).

The bodies shall be vertically divided into two parts.

The Hinge Doors on the last Twin Mobile Unit shall also be divided as per the bodies.

The clear height available per shelf be 390 mm

The UDL per shelf shall be 75 kgs.

The systems shall move on a set of 2 channels as per the standard Compactor.

The body including shelves should be given antirust surface treatment & to be powder coated with

epoxy polyester powder. The process should involve an 8 step treatment consisting of Hot water rinse,

Knock of degreasing, degreasing, Cold water rinse, phosphating, cold water rinse, passivation & dry off

oven treatment. Final finish of the product to consist of epoxy polyester powder coating of approved

color & shade with a Dry Film Thickness of minimum 40 microns. The testing of paint to be done for

various physical & chemical properties as per IS :101. The material to be then oven baked with a

controlled temperature of 180 deg.C to 200 deg.C.

Digitally signed by AMIT

I.NO DESCRIPTION UNIT QTY RATE AMOUNT CODE

Total Carried Over to Abstract for Sub Head: 16.00 Non Schedule Items- Based On Market Rates : 1,06,91,394.12

Digitally signed by AMIT

PROJECT -INTERIOR FITOUT FOR RAILTEL OFFICE, KIDWAI NAGAR, DELHI

PACKAGE : MECHANICAL WORKS

DETAILED ESTIMATES

DSR DESCRIPTION AMOUNT

S.NO. UNIT QUANTITY RATE

1 CHAPTER 1: VRV UNITS & ITS RELATED ITEMS -

Supplying, Installation, Testing & Commissioning of Modular type Variable

Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units

suitable for cooling/heating having 100% hermetically sealed inverter type

twin Rotary/Scroll Compressor(s),minimum two compressors (with

individual separate PCB) for above 14HP modules, microprocessor based

Controller, top discharge type condensing unit(s), with R-410-A Refrigerant

or equivalent, vibration Isolators with suitable foundation etc. complete as

required. To have better efficiency condenser fan shall be capable to

operate at different speed with respect to load.The unit shall deliver the

rated capacity and in confirmation as per IS 18728:2024 and CPWD

Specifications and work even at 50°C ambient temperature without

tripping. The system shall be able to deliver 100% of the rated capacity

31.3 1.1 upto 39 °C. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, -

50Hz AC power supply and BMS compatible. The unit shall be filled with

first charge of the refrigerant and ready for use as required. The condenser

should be coated with a hydrophilic film to prevent water accumulation on

the surface of the heat exchanger, enhance water dispersion, and reduce

the risk of degradation, thereby improving overall performance and

durability. The Indian Seasonal Energy Efficiency Ratio (ISEER) of the unit

shall be as per Energy Conservation and Sustainable Building Code (ECSBC)

2024 as below and complete as per CPWD specification, connections, inter

connections etc.

For Cooling or Heating or Both

Digitally signed by AMIT

PROJECT -INTERIOR FITOUT FOR RAILTEL OFFICE, KIDWAI NAGAR, DELHI

PACKAGE : MECHANICAL WORKS

DETAILED ESTIMATES

DSR DESCRIPTION AMOUNT

S.NO. UNIT QUANTITY RATE

Supplying, Installation, Testing and Commissioning of following minimum

capacity and external static pressure VRF/VRV ceiling mounted mid high

static ductable type Indoor unit equipped with washable synthetic media

prefilter, fan section with low noise fan/dynamically balanced blower,

multispeed motor, coil section with DX copper coil, electronic expansion

valve, corded remote control, outer cabinet, vibration Isolators, drain pan,

drain pump, other necessary supports etc., suitable for operation on single

phase AC supply 230 V ± 10%, 50 Hz complete as required. The Indoor

units must shut down upon receiving a singal from the BMS System/Fire

Singnals. The system shall be capable to adjust air flow as per room

requirement automatically. The cooling capacity of indoor unit will be at

air inlet conditions of 27 0C DB and 19 0C WB temperature.(Make will be

same as of Outdoor) High Static Ductable units (minimum 49 to 77 pascal

external static pressure)

Supplying, Installation, Testing and Commissioning of following minimum

capacity 4 way Cassette Type Indoor ceiling mounted unit equipped with

synthetic washable

media pre-filter, fan section with low noise fan/dynamically balanced

blower, multispeed motor, coil section with DX Copper coil, electronic

expansion valve, outer cabinet, drain pump, grill, necessary supports,

vibration Isolation, Corded remote control etc., suitable for operation on

31.4 1.4 single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The

Indoor units must shut down upon receiving a singal from the BMS

System/Fire Singnals. The system shall be capable to adjust air flow as per

room requirement in auto mode. The cooling capacity of indoor unit will

be at air inlet conditions of 27 0C DB and 19 0C WB temperature.

(Make will be same as of Outdoor)

Digitally signed by AMIT

PROJECT -INTERIOR FITOUT FOR RAILTEL OFFICE, KIDWAI NAGAR, DELHI

PACKAGE : MECHANICAL WORKS

DETAILED ESTIMATES

DSR DESCRIPTION AMOUNT

S.NO. UNIT QUANTITY RATE

Supplying, Installation, Testing and Commissioning of following minimum

capacity High wall type Indoor unit equipped with and comfort washable

synthetic media prefilter, fan section with low noise fan/dynamically

balanced blower, multispeed motor, coil section with DX copper coil,

electronic expansion valve, outer cabinet, cord less remote control, drain

pan, necessary accessories etc., suitable for operation on 230 V ± 10%, 50

Hz, single phase AC supply, complete as required. The Indoor units must

shut down upon receiving a singal from the BMS System/Fire

Singnals. The system shall be capable to adjust air flow as per room

requirement automatically. The cooling capacity of indoor unit will be at

air inlet conditions of 27 0C DB and 19 0C WB temperature.

(Make will be same as of Outdoor)

Supplying, Installation, Testing and Commissioning of Y/T/Multi Joints.

31.13 1.6 Joints shall be of same Original Equipment Manufacturer (OEM) make as of

31.13.2 1.6.2 Outdoor Multi Joint Each 1.00 8,098.00 8,098.00

Digitally signed by AMIT

PROJECT -INTERIOR FITOUT FOR RAILTEL OFFICE, KIDWAI NAGAR, DELHI

PACKAGE : MECHANICAL WORKS

DETAILED ESTIMATES

DSR DESCRIPTION AMOUNT

S.NO. UNIT QUANTITY RATE

Supply, fabrication, installation, testing and commissioning of M.S.

outdoor unit stand/frame for VRF/VRV outdoor units, fabricated from

M.S. channel iron 75 mm x 40 mm x 6 mm (7.14 kg/mtr) and required

angle/plate supports, including cutting, welding, drilling, grouting, anti-

vibration pads, nuts, bolts, anchor fasteners, red oxide primer, two coats

MR 1 1.7 of synthetic enamel paint, complete as per approved design, manufacturer Kg 55.00 162.00 8,910.00

recommendations and direction of Engineer-in-Charge. The stand shall be

suitable to safely support outdoor unit load at terrace/floor level complete

in all respects.

Supply, installation, testing & commissioning of the Graphic central

remote Controller which must act as an advanced air conditioning

management system to facilitate complete control of VRF air conditioning

equipment, it should be user friendly through its touch screen, icon display

and color LCD display. Integratable remote controller groups for for

required units (including AHUs & TFAs) and BMS compatible with

ethernet/ Wi-Fi communication protocol for remote monitoring. In

addition to basic controls such as settings for on/stop, the operation mode

& temperature, the air quantity and auto louver can be set. If a problem

occurs, an alarm code immediately shows the details of the problem. An

external input terminal is provided as standard. External signals enable the

following function: central operation/stop, demand control, emergency

stop, central operation output & central alarm output. The controller shall

perform but not limited to following functions:

Temperature setting

Fan speed/direction

Digitally signed by AMIT

PROJECT -INTERIOR FITOUT FOR RAILTEL OFFICE, KIDWAI NAGAR, DELHI

PACKAGE : MECHANICAL WORKS

DETAILED ESTIMATES

DSR DESCRIPTION AMOUNT

S.NO. UNIT QUANTITY RATE

Filter alarm reset

User control restriction

Operation mode Lock & set temp. limit

Set temperature

Room temperature

Fan speed/direction

User control restriction

Operation mode lock & set temp limit

Power distribution

Error information related to EEVs/Temp. Sensors/ODUs - -

Supply, Installation ,Testing & Commissioning of digital sequential

controller for cyclic ON/OFF operation of ac units with LED indication and

timer modes. Quoted price shall be inclusive of necessary conduting,

MR 3 1.9 copper control cabling from the sensors to the respective on board Each 3.00 5,751.00 17,253.00

microprocessor complete in all respects.

Supplying, Installation, testing and commissioning including

vaccumiazation and Nitrogen testing of following nominal sizes of

soft/hard drawn copper refrigerant piping for VRV/VRF system, complete

with fittings, with suitable adjustable ring type hanger supports,

1.10 jointing/brazing including accessories, insulated with XPLE Class-O tubular

insulation/with Class-O closed cell elastometric nitrile rubber tubular

sleeves sections of 19 mm thick insulation as given below for Suction and

Liquid lines, all accessories as per specifications etc. as required

31.14.1 1.10.1 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Meter 45.00 256.00 11,520.00

Digitally signed by AMIT

PROJECT -INTERIOR FITOUT FOR RAILTEL OFFICE, KIDWAI NAGAR, DELHI

PACKAGE : MECHANICAL WORKS

DETAILED ESTIMATES

DSR DESCRIPTION AMOUNT

S.NO. UNIT QUANTITY RATE

31.14.2 1.10.2 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Meter 55.00 346.00 19,030.00

31.14.3 1.10.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Meter 55.00 487.00 26,785.00

31.14.4 1.10.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm Meter 110.00 615.00 67,650.00

31.14.5 1.10.5 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm Meter 5.00 739.00 3,695.00

31.14.6 1.10.6 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm Meter 15.00 904.00 13,560.00

31.14.7 1.10.7 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm Meter 10.00 1,068.00 10,680.00

31.14.8 1.10.8 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm Meter 90.00 1,157.00 1,04,130.00

Supply, installation, testing and commissioning Rigid heavy class (10KG)

uPVC Condensate Drain piping of following sizes with minimum 6/9 mm

nitrile rubber insulation over the pipes, complete with fittings, supports, U

trap arrangement, clean plug and accessories for units as per

specifications and technical specification.

Supplying and applying of UL certified UV protective coating for surface

burning characteristics. The Protective Coating should conform to ASTM D

MR 6 1.12 5590 standard for fungal resistance and should provide mechanical Meter 30.00 236.00 7,080.00

Supply, Installation, Testing & Commissioning of On Line Type Condensate

drain pump for indoor Hi-wall units complete with water level sensor and

accessories as required. Quoted price shall be inclusive of controller, NRVs

& water sensors and associated wiring etc. to make installation complete.

Drain Pump shall be suitable for operation on 220+6 % volts 50 Hz, 1phase

AC power supply. Drain pumps shall automatically switch ON/Off based on

TOTAL CARRIED TO SUMMERY 17,97,300.00 2,23,894.00

Digitally signed by AMIT

PROJECT -INTERIOR FITOUT FOR RAILTEL OFFICE, KIDWAI NAGAR, DELHI

PACKAGE : MECHANICAL WORKS

DETAILED ESTIMATES

DSR DESCRIPTION AMOUNT

S.NO. UNIT QUANTITY RATE

2 CHAPTER 2 : AIR DISTRIBUTION -

30.12 DUCTING, GRILLS,DIFFUSER AND INSULATION -

Supplying, installation, balancing and commissioning of factory fabricated

GSS sheet metal rectangular/ round ducting complete with neoprene

rubber gaskets, elbows, splitter dampers, vanes, hangers, supports, bends,

30.12.1 2.1 transitions, reducers, end caps, collars etc as required complete in all -

respect in confirmation to IS : 655 and approved drawings and

specifications of following sheet thickness complete as required.

30.12.1.1 2.1.1 Thickness 0.63 mm sheet Galvanized Sheet Steel Ducting Sq.Mtr. 370.00 1,191.00 4,40,670.00

30.12.1.2 2.1.2 Thickness 0.80 mm sheet Galvanized Sheet Steel Ducting Sq.Mtr. 90.00 1,382.00 1,24,380.00

Supplying, installation, balancing and commissioning of fabricated at site

GSS sheet metal rectangular/ round ducting complete with neoprene

rubber gaskets, elbows, splitter dampers, vanes, hangers, supports, bends,

30.12.2 2.2 transitions, reducers, end caps, collars etc as required complete in all

respect in confirmation with IS : 655 and approved drawings and

specifications of following sheet thickness complete as required.

30.12.2.1 2.2.1 Thickness 0.63 mm sheet Galvanized Sheet Steel Ducting Sq.Mtr. 80.00 1,213.00 97,040.00

30.12.2.2 2.2.2 Thickness 0.80 mm sheet Galvanized Sheet Steel Ducting Sq.Mtr. 10.00 1,415.00 14,150.00

Supplying, Fixing, installation, testing and commissioning of powder

coated extruded aluminium Supply Air Grills with aluminium volume

30.15 2.3 control dampers in confirmation to SMACNA/IS and as per specifications Sq.Mtr. 3.00 9,623.00 28,869.00

complete etc. as required.

Digitally signed by AMIT

PROJECT -INTERIOR FITOUT FOR RAILTEL OFFICE, KIDWAI NAGAR, DELHI

PACKAGE : MECHANICAL WORKS

DETAILED ESTIMATES

DSR DESCRIPTION AMOUNT

S.NO. UNIT QUANTITY RATE

Supplying & fixing of powder coated extruded aluminium Return Air Grills

with louvers but without volume control dampers complete in

30.16 2.4 confirmation to SMACNA/IS and as per specifications complete etc. as Sq.Mtr. 4.00 6,285.00 25,140.00

Supplying, Fixing, installation, testing and commissioning of supply air

diffusers of powder coated aluminium with aluminium volume control

30.17 2.5 dampers with anti smudge ring & removable core in confirmation to Sq.Mtr. 2.00 12,841.00 25,682.00

SMACNA/IS and as per specifications complete etc. as required.

Supplying, Fixing, installation, testing and commissioning of Return air

diffusers of powder coated aluminium without volume control dampers

30.18 2.6 with anti smudge ring & removable core in confirmation to SMACNA/IS Sq.Mtr. 2.00 8,595.00 17,190.00

and as per specifications complete etc. as required.

Digitally signed by AMIT

PROJECT -INTERIOR FITOUT FOR RAILTEL OFFICE, KIDWAI NAGAR, DELHI

PACKAGE : MECHANICAL WORKS

DETAILED ESTIMATES

DSR DESCRIPTION AMOUNT

S.NO. UNIT QUANTITY RATE

Fabrication, supply, installation, testing, commissioning & balancing of

Powder Coated Single walled G.I. Elliptical/Oval Factory fabricated

Ducting as per SMACNA standards of mentioned duct gauges complete

with splitter dampers, turning vanes, fire retardant gasket, hanging

arrangement incluiding thereaded rod, strapes, channel/angle/rolled steel

wires or gripple wire rope supports etc.as per requirement, drawings and

specifications. The cost includes all low side accessories for ducting system

complete as required, as per drawings and specifications.

The scope includes supply & installation of Thermal insulation for duct

using 13 mm thick Class "O" (FM approved & in accordance to UL 94(HB,

2.7 VO, 1996) Aluminium foil faced Closed cell nitrile rubber based elastomeric

insulation with the density of 40 - 55 kg/m³. It should not absorbs more

than 0.2% water by volume, should not support microbial growth, should

not emit objectionable odors and thermal conductivity K value should not

exceed 0.033W/m.k @ 0deg C as per DIN EN 12667 and water vapor

permeance of 0.10. Joints should be sealed with 50 mm wide 3 mm thick

self adhesive insulation tape (Black Cotton Tape not acceptable). Adhesive

shall be used additionally with VOC level not exceeding 50 grms / Litre.

Digitally signed by AMIT

PROJECT -INTERIOR FITOUT FOR RAILTEL OFFICE, KIDWAI NAGAR, DELHI

PACKAGE : MECHANICAL WORKS

DETAILED ESTIMATES

DSR DESCRIPTION AMOUNT

S.NO. UNIT QUANTITY RATE

1. Insulation should be applied from inside of the duct.

2. All duct work shall confirm to the requirements of IS:277.

3. The hanging arrangement shall include cost of supports complying

SMACNA standards including angle, channel, gripple wire or threaded rod

complete as required (the contractor should do sampling for supporting

arrangement at site and seek approval from PMC / client / architect /

consultant before execution)

4. All transverse joints of ducting to be sealed with rubber gasket and

silicon sealant. All longitudinal joints also to be sealed with silicon sealant.

5. Also provide for pressure testing of ducts.

6. The ducting shall be provided with suitable thickness enamel painting

applied through painting Gun. it shall be ensured that the GI colour of duct

shall not be visible after painting. The colour of painting shall be finalized

and approved by architect. Cost of ducting includes painting of approved

colour and no extra cost shall be paid.

Supply, Installation,Testing ,commissioning & balancing of thermally

insulated flexible ducting comprising of inner as well as outer skin

constructed out of aluminum & fiber glass insulation 25mm thick of

2.8 minimum 24 kg/cu.m density insulation sandwiched in between duly

supported at regular interval as per site requirement etc. complete as

required as per specifications . Duct should confirm to fire rating standards

Digitally signed by AMIT

PROJECT -INTERIOR FITOUT FOR RAILTEL OFFICE, KIDWAI NAGAR, DELHI

PACKAGE : MECHANICAL WORKS

DETAILED ESTIMATES

DSR DESCRIPTION AMOUNT

S.NO. UNIT QUANTITY RATE

Supply,Installation,testing and commissioning of fire retardant double

Layer canvas connection for end connection of all the ductable indoor

units, ventilation fans and ducting to provide flexibility of movement in

case of a seismic event and to prevent transmission of vibration from the

unit to the duct. The fabric should be 2 hour fire resistant at 200°C,

fiberglass weave with silicone rubber coating with Galvanized metal strip

complete as required. Flexible duct connector fabric shall be air tight,

waterproof, virtually chemically inert and shall not emit toxic fumes when

exposed to open flame. The width of the flexible connection fabric shall

not be less than 150 mm. The flexible canvas connector shall be tested and

certified in accordance with BS 476 Part 7 Class 1 and NFPA 701 from NABL

accredited laboratory.

Supplying, installation, testing and commissioning of GI volume control

duct damper complete with neoprene rubber gaskets, nuts, bolts, screws

30.13 2.10 linkages,flanges etc in confirmation to SMACNA/IS and as per Sq.Mtr. 3.50 7,580.00 26,530.00

specifications complete etc. as required.

Supplying, Fixing, testing and commissioning of fire dampers of minimum

90 minutes fire rated in supply air duct/main branch and return air path as

and where required of required sizes i/c control wiring, the damper shall

be motorized and spring return so as to close the damper in the event of

power failure automatically and open the same in case of power being

30.14 2.11 restored. The spring return action shall be inbuilt mechanism and not

externally mounted. The damper shall also be closed in the event of fire

signal and, in confirmation to IS and as per specifications complete

etc. as required.

Digitally signed by AMIT

PROJECT -INTERIOR FITOUT FOR RAILTEL OFFICE, KIDWAI NAGAR, DELHI

PACKAGE : MECHANICAL WORKS

DETAILED ESTIMATES

DSR DESCRIPTION AMOUNT

S.NO. UNIT QUANTITY RATE

Supply, installing, testing, commissioning & balancing of Powder coated

extruded aluminium grill for Rectangular ducting without collar damper.

The sizes will be as per schedules and drawing. The colour of painting

MR 2.12 shall be finalized and approved by architect. Cost of grille includes painting Sq.Mtr. 2.50 8,745.00 21,862.50

of approved colour and no extra cost shall be paid (For Exhaust Air)

Supply, installing, testing, commissioning & balancing of Powder coated

extruded aluminium grill for Rectangular ducting with collar damper. The

sizes will be as per schedules and drawing. The colour of painting shall be

MR 2.13 finalized and approved by architect. Cost of grille includes painting of Sq.Mtr. 2.50 9,215.00 23,037.50

approved colour and no extra cost shall be paid (For Fresh Air)

Supply, Installation, testing & commissioning of extruded aluminium

powder coated louver with bird screen, GI wire mesh to be installed

outside for discharge of fresh / exhaust air from Fresh / exhaust fans as

MR 2.14 per the schedule. The colour of painting shall be finalized and approved by Sq.Mtr. 1.00 8,072.00 8,072.00

architect. Cost of louver includes painting of approved colour and no extra

cost shall be paid.

Supply, Installation, Testing,commissioning & balancing of powder coated

extruded aluminium anti-smudge flush type Round Air diffusers with

removable key operated butterfly volume control dampers and GI cone

with circular connection at the rear as per the approved shop drawings.

2.15 The colour of painting shall be finalized and approved by architect. Cost of

diffusers includes painting of approved colour and no extra cost shall be

Digitally signed by AMIT

PROJECT -INTERIOR FITOUT FOR RAILTEL OFFICE, KIDWAI NAGAR, DELHI

PACKAGE : MECHANICAL WORKS

DETAILED ESTIMATES

DSR DESCRIPTION AMOUNT

S.NO. UNIT QUANTITY RATE

MR 2.15.1 245 mm dia round diffuser with GI cone Each 10.00 1,215.00 12,150.00

Supply , installation , testing, commissioning & balancing of Powder

coated extruded aluminium trimless ceiling linear slot diffuser with hit

and miss type aluminium constructed volume control collar damper.The

2.16 colour of painting shall be finalized and approved by architect. Cost of

diffusers includes painting of approved colour and no extra cost shall be

MR 2.16.1 2 Slot Diffuser Meter 14.00 3,700.00 51,800.00

Supply , installation , testing and commissioning of Powder coated

extruded aluminium trimless ceiling linear slot diffuser without volume

control collar damper.The colour of painting shall be finalized and

2.17 approved by architect. Cost of diffusers includes painting of approved

colour and no extra cost shall be paid.

MR 2.17.1 2 Slot Diffuser Meter 20.00 2,691.00 53,820.00

Supply, Installation,Testing ,commissioning & Balancing of 50mm height

single piece both side grooved GI round spigot with circular flanges for

connection of main duct to flexible duct. The damper should be made of

2.18 spinning process.

The colour of painting shall be finalized and approved by architect. Cost of

dampers includes painting of approved colour and no extra cost shall be

Digitally signed by AMIT

PROJECT -INTERIOR FITOUT FOR RAILTEL OFFICE, KIDWAI NAGAR, DELHI

PACKAGE : MECHANICAL WORKS

DETAILED ESTIMATES

DSR DESCRIPTION AMOUNT

S.NO. UNIT QUANTITY RATE

Supply, installation and commissioning of following factory fabricated Z

type acoustic return air baffle with required acoustic lining from inside,

insulation and hardwares as required to damp sound upto 90% as per

MR 2.19 approved drawings complete as required and upto satisfaction of engineer Sq.Mtr. 16.00 2,879.00 46,064.00

in charge (prior sampling to be done before procurement).

Supplying, installing, testing & commissioning of GI volume control

damper for Elliptical/Oval/Spiral/Circular Ducting made of Galvanised

steel constructed 1.6 mm thick Frame & 1.8 mm thick aerofoil design

blades, blade spindle connected with self lubricated bronze bush, damper

is operated by means of lever & fault linkage connected to the spindle

within ducts with suitable links, levers, quadrants for manual control of

MR 2.20 volume of air flow and for proper balancing of the air distribution system Sq.Mtr. 1.00 10,762.00 10,762.00

complete as required and in compliance with specifications, schedules &

drawings. VCD to be installed on duct along with necessary support &

accessories. Dampers shall be provided with suitable duct piece

connection on both sides of dampers to facillitate easy connections with

Supplying and fixing of following thickness duly laminated aluminium foil

of mat finish closed cell Nitrile rubber (Class "O") insulation on existing

duct after applying suitable adhesive for Nitrile rubber. The joints shall be

30.23 2.21 sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape -

insulation complete as per specifications and as required.

30.23.1 2.21.1 19mm thick insulation for supply air duct & Return Air Duct Sq.m. 410.00 810.00 3,32,100.00

Digitally signed by AMIT

PROJECT -INTERIOR FITOUT FOR RAILTEL OFFICE, KIDWAI NAGAR, DELHI

PACKAGE : MECHANICAL WORKS

DETAILED ESTIMATES

DSR DESCRIPTION AMOUNT

S.NO. UNIT QUANTITY RATE

Supply,Installation,Testing & commissioning of Acoustic insulation for air

ducts and plenums using following sizes class-1 rating Open cell nitrile

rubber elastomeric insulation with density of 140 - 180 kg / m³. It should

not absorb more than 0.2% water by volume, the material shall be anti

2.22 microbial, should not emit objectionable odors. The conductivity K value

should not exceed 0.04W/m.k @ 20°C as per DIN EN 12667 and water

vapor permeance of 0.10. Adhesive shall be used additionally with VOC

level not exceeding 50 grms/ Litre.

Supply, installing, testing, commissioning & balancing of Powder coated

extruded aluminium grill for Elliptical/Oval ducting with 5mm blade

thickness in front, Grille height 16 mm and blade pitch 12.5 mm including

aluminium construction volume control collar damper for supply air. The

MR 2.23 sizes will be as per schedules and drawing. The colour of painting shall be Sq.m. 1.00 11,435.00 11,435.00

finalized and approved by architect. Cost of grille includes painting of

approved colour and no extra cost shall be paid.

TOTAL CARRIED TO SUMMARY 11,97,041.00 5,53,454.00

3 CHAPTER 3: CHILLED WATER UNIT & ITS RELATED ITEM

Digitally signed by AMIT

PROJECT -INTERIOR FITOUT FOR RAILTEL OFFICE, KIDWAI NAGAR, DELHI

PACKAGE : MECHANICAL WORKS

DETAILED ESTIMATES

DSR DESCRIPTION AMOUNT

S.NO. UNIT QUANTITY RATE

Supply, Installation, Testing & Commissioning of factory-built ceiling-

suspended Treated Fresh Air (TFA) unit, double-skin chilled water based

type, with 25 ±5 mm thick PUF insulated panels (density ≥42 kg/m³) and

0.6 mm thick GI inner & outer skins, complete with AMCA-certified EC

centrifugal fan with airfoil blades and VFD, selected for required static

pressure, IE-3, TEFC motor, suitable for 415 V ±10%, 50 Hz, 3-phase AC

supply. Differential Pressure Transmitter (DPT) across filter section shall

be included. Unit shall include 50 mm thick MERV-8 pre-filters and MERV-

14 fine filters, mixing box with dampers, AHRI/Eurovent certified chilled

water TFA coil, 18-gauge SS insulated drain pan, fire-retardant canvas

3.1 connections, vibration isolators, hangers, accessories, and all works

complete as per specifications and drawings.

The Unit shall be supplied with Insulated drain tray with drain pump. The

scope includes local isolator with 3 meters long armoured cable and it's

termination at both ends.

The unit shall be BMS compatible, should works on open protocol and

should be complete in all respect and as per the specification. Starter, local

push button, DC power supply, communication port, accessories etc

required for operation of the unit shall be included in this cost.

Total Static pressure given below is minimum required for the system. The

actual static pressure a should be accurately calculated and confirmed by

the vendor during the bidding process.

The unit shall have AHRI/Eurovent certification.

MR 3.1.1 2600 CFM/ 17.5 Tr, 60 total static pressure Each 1.00 1,61,430.00 1,61,430.00

Digitally signed by AMIT

PROJECT -INTERIOR FITOUT FOR RAILTEL OFFICE, KIDWAI NAGAR, DELHI

PACKAGE : MECHANICAL WORKS

DETAILED ESTIMATES

DSR DESCRIPTION AMOUNT

S.NO. UNIT QUANTITY RATE

Supply, Installation, Testing & Commissioning of factory-built double-skin

chilled water based horizontal Air Handling Unit (AHU) with thermal

break aluminium profile, fabricated from extruded aluminium frame, 0.6

mm thick inner GI sheet and pre-plastisol coated outer GI sheet. Unit shall

be complete with AMCA-certified DIDW centrifugal fan with airfoil blades,

minimum 70% efficiency, selected for required static pressure. Fan motor

shall be TEFC, IE-3 efficiency class, suitable for 415 V ±10%, 50 Hz ±5% AC

supply. Cooling section shall comprise 4/6 row chilled water coil made of

aluminium fins and seamless copper tubes with minimum tube thickness

0.42 mm, complete with thermostat. Filtration section shall include MERV-

3.2 8 pre-filters, non-woven synthetic media, 10-micron particle filtration with

90% efficiency, housed in extruded aluminium frames. Unit shall be

provided with 20-gauge stainless steel condensate drain pan, properly

sloped and insulated with 13 mm thick closed-cell nitrile rubber,

connected to the nearest drain point. Complete unit shall be supplied,

installed, tested, and commissioned as per relevant IS / ASHRAE / AMCA

standards, inclusive of all accessories.

(starter, local push button, DC power supply, communication port,

accessories etc required for operation of AHU shall be included in this

cost). The AHU shall be complete in all respect and as per the specification.

The AHU panels shall be insulated with 25±5 mm thick & 40 Kg/m³ density

PU foam. The motor & blower assembly shall be mounted on aluminium

extruded section only. The complete AHU shall confirm to standard

specification. The face velocity across cooling coil shall be limited to 450

FPM maximum. The capacity of Air-handlers shall be as follows:

Digitally signed by AMIT

PROJECT -INTERIOR FITOUT FOR RAILTEL OFFICE, KIDWAI NAGAR, DELHI

PACKAGE : MECHANICAL WORKS

DETAILED ESTIMATES

DSR DESCRIPTION AMOUNT

S.NO. UNIT QUANTITY RATE

Total Static pressure given below is minimum required for the system. The

actual static pressure and the dimensions of the AHU should be accurately

calculated and confirmed by the vendor during the bidding process.

The unit shall have AHRI/Eurovent certification.

MR 3.2.1 1500 CFM/3.75 TR, 50 mm total static pressure Each 1.00 1,14,346.00 1,14,346.00

Supplying, laying/ fixing, testing and commissioning of following nominal

sizes of chilled water piping inside the building (with necessary clamps,

vibration isolators and fittings but excluding valves, strainers, gauges etc.)

duly insulated with following closed cell elastometric nitrile rubber of

minimum 45 Kg / cu m density, thermal conductivity 0.037 W/MK or better

at 20 deg mean temperature class 'O' insulation applied by suitable

adhesive complete including repairing of damage to building etc. as

perspecifications and as required complete in all respect.

Note:- The Pipes of sizes 150mm & below shall be M.S. 'C' class as per IS :

1239 and pipes size above 150mm shall be welded black steel pipe heavy

class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes

upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400

mm dia and above.

30.2.8 3.3.3 100mm dia. (32 mm thick insulation) Meter 40.00 3,556.00 1,42,240.00

30.2.9 3.3.4 80mm dia.(32 mm thick insulation) Meter 10.00 2,656.00 26,560.00

30.2.10 3.3.5 65mm dia(32 mm thick insulation) Meter 35.00 2,139.00 74,865.00

30.2.11 3.3.6 50mm dia. (32 mm thick insulation) Meter 30.00 1,859.00 55,770.00

30.2.12 3.3.7 40mm dia. (32 mm thick insulation) Meter 10.00 1,510.00 15,100.00

Supplying, fixing, testing and commissioning of following valves,

strainers, gauges in the chilled water plumbing duly insulated to

30.7.1.2 the same specifications as the connected piping and adequately

supported as per specifications

Digitally signed by AMIT

PROJECT -INTERIOR FITOUT FOR RAILTEL OFFICE, KIDWAI NAGAR, DELHI

PACKAGE : MECHANICAL WORKS

DETAILED ESTIMATES

DSR DESCRIPTION AMOUNT

S.NO. UNIT QUANTITY RATE

BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber

Seal & O- Ring PN 16 pressure rating for chilled water/hot eater

circulation as specified

BALANCING VALVE WITH BUILT IN MEASURING FACILITY with C I

body flanged construction with EPDM coated disc with long pitch

30.7.2 3.5 with protected out pipe insulation & PN 16 pressure rating for

chilled / hot water circulation as specified.

Y - STRAINER of Ductile CI Body flanged ends with stainless steel

30.7.4 3.6 strainer for chilled / hot water circulation including insulation as specified.

Digitally signed by AMIT

PROJECT -INTERIOR FITOUT FOR RAILTEL OFFICE, KIDWAI NAGAR, DELHI

PACKAGE : MECHANICAL WORKS

DETAILED ESTIMATES

DSR DESCRIPTION AMOUNT

S.NO. UNIT QUANTITY RATE

Supply , Installation, testing and commissioning of following sizes

electronic, self balancing, Pressure independent type dynamic balancing

valve with integrated 2 way Balancing and modulating Control valves in a

single unit of valve. The actuator shall be capable of accepting upto 10V DC

and upto 20mA electric signal and shall provide similar transduved

feedback output to control system. Maximum close off pressure shall not

be less than 6 bar for upto 50 mm valves and 7 bar for 65mm and above.

Valves should have pressure rating of 25 bar minimum. Pressure Drop

3.9 across the valve must not exceed 20 kpa up to DN 32 and 30 Kpa in bigger

Sizes (for AHUs).

DN 15 to DN 32 Brass Body Ext. Threaded DN 40 & DN 50 Cast Iron Body

Ext. Threaded and DN 65 to DN 100 Cast Iron body, Flanged Ends

Connection. Duly mounted with Modulating actuator IP42/54 accordingly

type suitable for 24V AC.

The Valve should be selected to enable lowest possible pressure drop to

have benefits of lower recurring Pumping Energy. All Valve shall be

capable to communicate with BMS System.

SUBTOTAL CARRIED OVER TO SUMMARY 4,16,774.00 4,81,936.00

4 CHAPTER 4: MECHANICAL VENTILATION WORK

Digitally signed by AMIT

PROJECT -INTERIOR FITOUT FOR RAILTEL OFFICE, KIDWAI NAGAR, DELHI

PACKAGE : MECHANICAL WORKS

DETAILED ESTIMATES

DSR DESCRIPTION AMOUNT

S.NO. UNIT QUANTITY RATE

Supply, installation, testing and commissioning of AMCA Certified (For Air

and Sound Performance) Vane/Tube Axial Flow Fan of mentioned

capacity. Entire fan model & AMCA Seal shall apear in techncial submittal

of fan. All the fans should be standard hot dip galvanized with minimum

220 GSM Zinc Coating and complete with bird screen at inlet, along with

backdraft damper, canvas connection at outlet, mounted on required

vibration isolators, suitable for 415V ±10%, 50 Hz. 3 phase electric supply.

The electric motor coupler shall be squirrel cage induction motor (IE-2

type) confirming to IS - 325 IP-55 with class `H' insulation. Motor shall be

of high temperature resistance "Class H Smoke Spill" 250° C for 2 hrs. Fan

shall be CE or UL certified for high temprature. Fan Total Efficiency should

not be less than 60 %, noise level should not be more than 75 dba when

4.1 measured in hemisperical reverberant room conditions at a distance of 3

mtrs from the fan. The fan shall be complete in all respect and should

match the specification, requirement, drawings and schedule. (Fire Case)

1. Below specified fan static is tentative and requirement may vary +/- 5

millimeters as per actual site requirement. Contractor should consider the

same in their costing and nothing extra shall be paid for such variation.

2. Stater, Local push button, communication port, accessories etc required

for operation of Fan shall be included in this cost.

MR 4.1.1 5500 CFM, 30 total static pressure Each 4.00 47,084.00 1,88,336.00

Digitally signed by AMIT

PROJECT -INTERIOR FITOUT FOR RAILTEL OFFICE, KIDWAI NAGAR, DELHI

PACKAGE : MECHANICAL WORKS

DETAILED ESTIMATES

DSR DESCRIPTION AMOUNT

S.NO. UNIT QUANTITY RATE

Supply, installation, testing and commissioning of Factory Fabricated

Circular Inline made out of Galvanised steel sheet with efficiency Class IE3

motor suitable for operation on 230 volts ± 10%, 50 Hz ± 5% AC supply

with motor, canvass connection at inlet and outlet, louvers bird screen at

4.2 outlet, complete as required with electric panel with MCB and relays, with

5 meter cabling and earthing . The blower should be AMCA Certified for air

and sound performance and should be selected for maximum efficiency.

MR 4.2.1 400 CFM,Total static pressure of 15mm Each 1.00 6,861.00 6,861.00

MR 4.2.2 250 CFM,Total static pressure of 15mm Each 1.00 5,381.00 5,381.00

Supply, installation, testing, and commissioning of circular duted inline fan,

explosion proof type fan with low noise, manufactured from plastic

material and from sheet steel with epoxy polyester paint. The fan unit shall

be of detachable type, allowing removal without demounting the duct

connection. The motor shall be of two-speed type, speed controllable,

suitable for single phase 230V, 50 Hz supply. Motor protection shall be

minimum IP44, with minimum insulation class B and safety thermal

overload protection. The fan shall conform to ATEX 94/9/CE Directive

standards for explosion-proof applications, complete in all respects as per

specifications and drawings.

Starter, communication port, No, NC contact, Potential free contacts,

gravity louvers accessories etc required for operation of fan shall be

included in this cost.

Capacity S.P Area to

(Cfm) (mmWG) to be exhausted

Digitally signed by AMIT

PROJECT -INTERIOR FITOUT FOR RAILTEL OFFICE, KIDWAI NAGAR, DELHI

PACKAGE : MECHANICAL WORKS

DETAILED ESTIMATES

DSR DESCRIPTION AMOUNT

S.NO. UNIT QUANTITY RATE

Supply, Fixing and Testing of H2 Sensors. Sensors should be capable to give

command directly to Inline fan panel after increasing of H2 level beyond

certain specified levels. Quoted price shal be inclusive of Power cabling

and control cabling, communication port, power supply module, as

required between sensor & panels etc. Sensors should be able to

automatically switch ON/OFF the Fans after increasing/control of H2 level

MR beyond certain specified levels respectively. Price shall also be inclusive of Each 1.00 50,447.00 50,447.00

all accessories required to make installation complete whether specified or

not. H2 sensors shall be capable for BMS Integration as well. complete in

all respects upto the satisfaction of engineer incharge

SUBTOTAL CARRIED OVER TO SUMMARY - 3,26,359.00

Digitally signed by AMIT

PROJECT -INTERIOR FITOUT FOR RAILTEL OFFICE, KIDWAI NAGAR, DELHI

PACKAGE : MECHANICAL WORKS

DETAILED ESTIMATES

DSR DESCRIPTION AMOUNT

S.NO. UNIT QUANTITY RATE

5 CHAPTER 5: ASSOCIATED ELECTRICAL & MISCELLANEOUS WORKS

Supplying, unloading, storing of following sizes of 1.1 kV grade XLPE

insulated Heavy duty, Copper conductor armoured cables suitable for

working voltage upto and including 1100 Volts, laid and tied on existing

overhead cable trays including providing MS supports and clamps for fixing

to supports in an approved manner, providing fire retardant sealant for

5.1 crossing through shafts, openings etc where required complete as required

and as per specifications. Circuit identification tag should be attached

with the concerned cable alongwith the test report of following sizes of

cable to be submitted by the contractor at the time of delivery of

material at site.

MR 5.1.1 4C X 16 Sqmm copper conductor wire armoured Meter 20.00 1,300.00 26,000.00

MR 5.1.2 4C X 10 Sqmm copper conductor wire armoured Meter 20.00 848.00 16,960.00

MR 5.1.3 4C X 6 Sqmm copper conductor wire armoured Meter 50.00 530.00 26,500.00

MR 5.1.7 3C X 6 Sqmm copper conductor wire armoured Meter 100.00 410.00 41,000.00

MR 5.1.8 3C X 4 Sqmm copper conductor wire armoured Meter 20.00 289.00 5,780.00

Supplying and making end termination with Single compression brass

gland and lugs for following size of XLPE insulated and PVC sheathed

copper armoured conductor cable of 1.1 KV grade of the following sizes as

required. The cost shall include the cost of crimping and all tools and

5.2 accessories required to complete the job in full respect.

Note : cu lugs shall be used for copper cable and PG Threaded Nylon

Flexible cable glands to be used for earthing/flexible cables for termination

MR 5.2.1 4C X 16 Sqmm copper conductor wire armoured Each 2.00 302.00 604.00

MR 5.2.2 4C X 10 Sqmm copper conductor wire armoured Each 2.00 240.00 480.00

MR 5.2.3 4C X 6 Sqmm copper conductor wire armoured Each 4.00 204.00 816.00

MR 5.2.7 3C X 6 Sqmm copper conductor wire armoured Each 12.00 165.00 1,980.00

MR 5.2.8 3C X 4 Sqmm copper conductor wire armoured Each 2.00 165.00 330.00

Digitally signed by AMIT

PROJECT -INTERIOR FITOUT FOR RAILTEL OFFICE, KIDWAI NAGAR, DELHI

PACKAGE : MECHANICAL WORKS

DETAILED ESTIMATES

DSR DESCRIPTION AMOUNT

S.NO. UNIT QUANTITY RATE

Supplying, unloading, storing, laying, testing and commissioning of

following sizes of PVC insulated Heavy duty, shielded Copper conductor

cables suitable for communication cum transmission laid in existing Cable

trays / raceways / conduites complete as required and as per

specifications. Circuit identification tag should be attached with the

concerned cable alongwith the test report of following sizes of cable to

be submitted by the contractor at the time of delivery of material at site.

MR 5.3.2 2C X 1.5 sqmm copper conductor cable Meter 1,200.00 236.00 2,83,200.00

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE

10.8 5.4 power cable of 1.1 KV grade of following size on cable tray as required.

10.8.1 5.4.1 Upto 35 sq. mm (clamped with 1mm thick saddle) Meter 90.00 53.00 4,770.00

Supplying and fixing of following sizes of steel conduit along with

accessories in surface/recess including painting in case of surface conduit,

1.20 5.5 or cutting the wall and making good the same in case of recessed conduit

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along

17.5.4 5.5.4 with all ancillaries and accessories like coupler etc. as required. Meter 20.00 60.00 1,200.00

Supplying and installing following size of perforated Hot Dipped Galvanised

Iron cable tray (Galvanisation thickness not less than 50 microns) with

4.6 5.6 perforation not more than 17.5%, in convenient sections, joined with

connectors, suspended from the ceiling with G.I. suspenders including G.I.

bolts & nuts, etc. as required.

4.6.3 5.6.3 225 mm width x 50 mm depth x 1.6 mm thickness Meter 150.00 991.00 1,48,650.00

4.6.4 5.6.4 300 mm width x 50 mm depth x 1.6 mm thickness Meter 20.00 1,062.00 21,240.00

Digitally signed by AMIT

PROJECT -INTERIOR FITOUT FOR RAILTEL OFFICE, KIDWAI NAGAR, DELHI

PACKAGE : MECHANICAL WORKS

DETAILED ESTIMATES

DSR DESCRIPTION AMOUNT

S.NO. UNIT QUANTITY RATE

Supplying and installing following size of perforated Hot Dipped

Galvanised Iron cable tray "bends" (galvanisation not less than

50 microns) with perforation not more than 17.5%, in

4.7 5.7 convenient sections, joined with connectors, suspended from

the ceiling with G.I. suspenders including G.I. bolts & nuts, etc.

4.7.3 5.7.3 225 mm width X 50 mm depth X 1.6 mm thickness Each 8.00 1,811.00 14,488.00

4.7.4 5.7.4 300 mm width X 50 mm depth X 1.6 mm thickness Each 1.00 1,977.00 1,977.00

Supplying and installing following size of perforated Hot Dipped Galvanised

Iron cable tray "Tee" (galvanisation not less than 50 microns) with

4.8 5.8 perforation not more than 17.5%, in convenient sections, joined with

connectors, suspended from the ceiling with G.I. suspenders including G.I.

bolts & nuts, etc. as required

4.8.3 5.8.3 225 mm width X 50 mm depth X 1.6 mm thickness Each 4.00 2,097.00 8,388.00

4.8.4 5.8.4 300 mm width X 50 mm depth X 1.6 mm thickness Each 1.00 2,294.00 2,294.00

Supplying and installing following size of perforated Hot Dipped Galvanised

Iron cable tray "Cross member"(galvanisation not less than 50 microns)

4.9 5.9 with perforation not more than 17.5%, in convenient sections, joined with

connectors, suspended from the ceiling with G.I. suspenders including G.I.

bolts & nuts, etc as required

4.9.3 5.9.3 225 mm width X 50 mm depth X 1.6 mm thickness Each 3.00 2,117.00 6,351.00

4.9.4 5.9.4 300 mm width X 50 mm depth X 1.6 mm thickness Each 1.00 2,513.00 2,513.00

Supplying and installing following size of perforated Hot Dipped Galvanised

Iron cable tray "Reducer" (galvanisation not less than 50 microns) with

4.10 5.10 perforation not more than17.5%, in convenient sections, joined with

connectors, suspended from the ceiling with G.I. suspenders including G.I.

bolts & nuts, etc as required.

4.10.3 5.10.3 225 mm width X 50 mm depth X 1.6 mm thickness Each 2.00 2,572.00 5,144.00

4.10.4 5.10.4 300 mm width X 50 mm depth X 1.6 mm thickness Each 1.00 2,991.00 2,991.00

Digitally signed by AMIT

PROJECT -INTERIOR FITOUT FOR RAILTEL OFFICE, KIDWAI NAGAR, DELHI

PACKAGE : MECHANICAL WORKS

DETAILED ESTIMATES

DSR DESCRIPTION AMOUNT

S.NO. UNIT QUANTITY RATE

Supply and installation of following sizes suitable "Hot Dipped Galvanized

Covers" for following size perforated Hot Dipped Galvanised Iron cable

tray in convenient sections for straight runs, tee, elbows reducers etc.

including providing suitable clamps, HDG bolts & nuts, etc, joined with

5.11 connectors for cable trays suspended from the ceiling mounted on floor,

surface mounted upto satisfaction of engineer-incharge complete as

required, for following size of cable trays

The coller height of cover should be minimum 15mm

MR 5.11.1 100 mm width X 50 mm depth X 1.6 mm thickness Meter 25.00 243.00 6,075.00

MR 5.11.2 150 mm width X 50 mm depth X 1.6 mm thickness Meter 5.00 377.00 1,885.00

Supply, Installation, Testing & commissioning of WELL complied RESET IAQ

Monitor to measure PM2.5, PM10, CO2, TVOCs, Temperature, Humidity on

a real time basis.

The IAQ Monitor should be capable of getting connected with Wi-Fi / GSM

for data transmission and shall be BMS compatible. The IAQ Monitor

should be capable of sending the indoor air quality information on display

screen/Mobile/Workstationas per Client's requirement. It should indicate

the quality of air through changing the colors as per the NAAQS standards.

It shall have an in-built battery with backup of 3 to 4 hours. It shall have

grade B sensor as per RESET certification. It shall be CE certified. It shall be

accredited to be used in green building projects. Each device shall be

suitable to capture data of minimum 500 m2.

IAQ monitoring system shall have in-house web dashboard with following

Kiosk view for real-time air quality display on single / multiple Smart TVs.

Digitally signed by AMIT

PROJECT -INTERIOR FITOUT FOR RAILTEL OFFICE, KIDWAI NAGAR, DELHI

PACKAGE : MECHANICAL WORKS

DETAILED ESTIMATES

DSR DESCRIPTION AMOUNT

S.NO. UNIT QUANTITY RATE

Supply materials, tools and manpower to Dismantling safely, shifting, re-

installation, testing & re-commsissioning existing Ceiling Suspended Air

Handling Unit (CSAHU), associated starter and all accessories from existing

location to new location on same floor, including switching off and

isolating electrical supply including stater & disconnecting control wiring,

5.14 chilled water supply/return piping, valves, balancing devices, condensate

drain piping, flexible joints, duct connections, supports, hangers and all

connected accessories, complete without causing damage to the unit,

piping, building finishes or nearby services. Complete as directed by

Engineer-in-Charge.

Supply materials, tools and manpower to Dismantling safely, shifting

existing Ceiling Suspended Air Handling Unit (CSAHU), associated starter

and all accessories from including switching off and isolating electrical

supply including starter & disconnecting control wiring, chilled water

supply/return piping, valves, balancing devices, condensate drain piping,

flexible joints, duct connections, supports, hangers and all connected

accessories, complete without causing damage to the unit, piping, building

finishes or nearby services. The work shall include The work shall include

delivering all dismantled and removed materials and all their accessories

to the End User warehouses and delivering them by official storage

documents according to the supervisory committee instructions, and all

the works required to complete the Job.

Digitally signed by AMIT

PROJECT -INTERIOR FITOUT FOR RAILTEL OFFICE, KIDWAI NAGAR, DELHI

PACKAGE : MECHANICAL WORKS

DETAILED ESTIMATES

DSR DESCRIPTION AMOUNT

S.NO. UNIT QUANTITY RATE

Supply materials, tools and manpower to dismantle and remove the

cabinate fan complete from installed position, including removal supports,

hangers, nuts, bolts and all connected accessories, after disconnecting

from equipment and terminals, with due care to avoid damage to adjacent

works. The work shall include The work shall include delivering all

MR 5.16 dismantled and removed materials and all their accessories to the End Each 1.00 6,000.00 6,000.00

User warehouses and delivering them by official storage documents

according to the supervisory committee instructions, and all the works

required to complete the Job.

Supply materials, tools and manpower to dismantle and remove the

installed Ducting complete from installed position, including removal of

G.I. duct sections, bends, tees, reducers, dampers, grills, collars, flanges,

flexible joints, supports, hangers, nuts, bolts and all connected accessories,

after disconnecting from equipment and terminals, with due care to avoid

damage to adjacent works. The work shall include The work shall include

MR 5.17 delivering all dismantled and removed materials and all their accessories Lot 1.00 70,000.00 70,000.00

to the End User warehouses and delivering them by official storage

documents according to the supervisory committee instructions, and all

the works required to complete the Job.

Digitally signed by AMIT

PROJECT -INTERIOR FITOUT FOR RAILTEL OFFICE, KIDWAI NAGAR, DELHI

PACKAGE : MECHANICAL WORKS

DETAILED ESTIMATES

DSR DESCRIPTION AMOUNT

S.NO. UNIT QUANTITY RATE

Supply materials, tools and manpower to dismantle and remove the

installed Chilled Water Piping system from installed position, including

draining of water, isolation of line, removal of Chilled water pipes of all

sizes, fittings, valves, strainers, flanges, reducers, unions, flexible

connections, supports, hangers, clamps, anchors, insulation with cladding

wherever provided, and all associated accessories, without damage to

MR 5.18 adjacent services or structure. The work shall include delivering all Lot 1.00 70,000.00 70,000.00

dismantled and removed materials and all their accessories to the End

User warehouses and delivering them by official storage documents

according to the supervisory committee instructions, and all the works

required to complete the Job.

SUBTOTAL CARRIED OVER TO SUMMARY 4,59,106.00 6,47,610.00

Digitally signed by AMIT

PROJECT -INTERIOR FITOUT FOR RAILTEL OFFICE, KIDWAI NAGAR, DELHI

PACKAGE - SUPPLY OF LT PANELS

DETAILED BILL OF QUANTITIES

S.NO. DESCRIPTION UNIT QUANTITY RATE

1 CHAPTER 1 : LT PANELS

Design, manufacture, testing at works, supply, installation, testing

& commissioning of following floor / wall mounted clad

switchboard, factory built, modular, sectionalised, dead front, fully

compartmentalized with hinged lockable detachable front & back

openable, Form IIIB type extensible Partial Type Tested Assembly,

IEC-60439 compliant LT cubicle panel of suitable size, suitable for

operation on 433 volts, 50 Hz AC 3 phase 4 wire supply system

fabricated from powder coated CRCA sheet steel, with all load

bearing members of minimum 2mm thickness , all non-load

bearing members of minimum 1.6mm thickness and minimum

3mm thick gland plates. The panels shall be fabricated in easily

transportable sections, length, height, depth etc. to match with

site condition, having vibration free structure with stiffeners

provided as required.

Note - The following minimal characterstics shall be considered for

a. Operating Voltage - 433 Volts

b. Frequency - 50 Hz (+/- 3%)

c. IP 43 for Indoor Panels & IP 55 for Outdoor Panels

d. Pollution Degree - 3

e. Ambient Temperature - 45 Degree Celsius

f. Annual Average Relative Humidity - 50%

An approval shall be taken for each panel before manufacturing.

The Switchboards shall have provision to accommodate all cables

h. from the bottom /top as required.

Digitally signed by AMIT

PROJECT -INTERIOR FITOUT FOR RAILTEL OFFICE, KIDWAI NAGAR, DELHI

PACKAGE - SUPPLY OF LT PANELS

DETAILED BILL OF QUANTITIES

S.NO. DESCRIPTION UNIT QUANTITY RATE

2022 All live accessible parts shall be shrouded with 1mm thick

polycarbonate/3 mm thick FRP sheet and all equipment shall be

finger touch proof. The busbar insulation shall be with heat

shrinkable sleeves according to the colour code. SMC shrouds and

busbar supports shall be used. All MCCB door handle shall be

interlocked and lockable in OFF position.

Galvanised hardware with zinc passivation shall be used in

j. fabrication of Switchboards.

The bottom base ISMC channel of suitable section but not less

k. than 75mm x 50mm x 5mm shall be used.

Each panel shall have a suitable aluminium earth bus but not less

than 25mm x 6mm throughout the length of switchboards at the

l. rear with 2 nos. earth studs on either sides of panel board for

connecting earthing strips. (Except Main Isolation panel where

earth bus shall be 50mmx10mm)

The busbar insulation shall be with heat shrinkable sleeves

m. according to the colour code. SMC shrouds and busbar supports

PVC insulated FRLS copper conductor to be used for connections

and interconnection with solid conductor wires and control wiring

with 1.5 sqmm. & 2.5sqmm for voltage & current respectively.

Suitable Aluminium earth bus to be provided throughout the

length of Switchboards.

All indication lamps / illuminated push buttons shall be LED type.

r. 2A/6A SP MCBs shall be used as backup protections.

All MCCBs shall be provided at least with ON, OFF & Trip indication

lamps unless otherwise specified.

Digitally signed by AMIT

PROJECT -INTERIOR FITOUT FOR RAILTEL OFFICE, KIDWAI NAGAR, DELHI

PACKAGE - SUPPLY OF LT PANELS

DETAILED BILL OF QUANTITIES

S.NO. DESCRIPTION UNIT QUANTITY RATE

2022 All MCCBs shall be with thermal magnetic releases up to 250 A

rating and with microprocessor based releases above 250 A rating,

line load reversibility, Ics = 100% Icu, & extended rotary handle

unless otherwise specified

All MCCB shall have rotary handle with pad locking arrangement.

The MCCBs shall be lockable in OFF position.

v. Door interlocking for all feeders shall be provided.

All breaking Capacity for MCCB to be Ics=100%Icu and Uimp of

All control & power wiring from all components such as

x. switchgears, meters, relays etc. shall be broughtout upto the

terminal blocks inside cable alley.

All outgoing terminals shall be provided in cable alley on proper

insulated supports (SMC/DMC).

Any panel which has almirah type doors at back side shall be

provided with lockable arrangement.

All MCB to be C Curve for raw power and D curve for UPS power.

Removable lifting hook shall be provided in all transportation

Multifunction meters installed shall be BMS Compatible, capable of

ac. delivering Bacnet, Modbus or Lonworks protocol etc.

Bus bar shall be high conductivity (99%), ETP - Electrical grade

copper or 50-55% Aluminium as specified in BOQ.

Bus bar shall be designed on 45 deg. Ambient temperature and

ae. limit of temperature rise shall be 35 deg. Over and above Ambient

af. Bus bars shall be with heat shrinkable PVC sleeves.

ag. MCB's shall be of minimum 10kA fault with stand capacity.

Concerning vendor needs to furnish the busbar calculations (for

ah. both phase and earth bus) at the time of GA approval and busbar

size has to be as per the approved GA drawing.

Digitally signed by AMIT

PROJECT -INTERIOR FITOUT FOR RAILTEL OFFICE, KIDWAI NAGAR, DELHI

PACKAGE - SUPPLY OF LT PANELS

DETAILED BILL OF QUANTITIES

S.NO. DESCRIPTION UNIT QUANTITY RATE

2022 Provision for accommodating incoming and outgoing cables

ai. adequately shall be as per single line diagram for each panel.

All floor mounted panels shall be minimum 1800mm min height.

aj. Dummy or spare compartments to be provided if required.

Maximum of 4xFP MCBs or 8xDP MCBs shall be accomodated in

one compartment not more than these.

All MCB compartments shall be provided with viewing window.

Panel builder shall consider necessary provision for

am. implementation of Tubular Gas Suppression System by third party

at site with minimal hassles and alterations.

MR 1 1.1 Main Distribution Board Set 1.00 2,69,049.00 2,69,049.00

1 x Type-2 surge arrester with suitable Protection.

1 x R,Y,B LED indication lamp with 2A control MCB

1 x ON,OFF,Trip LED indication lamp with 2A control MCB.

1 x 125 A, FP 25kA, MCCB with thermal magnetic based release

with o/l, s/c and earth fault protection through earth fault module.

1 X (Digital flush type class -1.0 accuracy multifunction meter with

RS-485 communication port for measurement of THD, KVARH KW,

KWH, KVAR, PF, V, A, Hz with 3X125/5A, 5VA Class 1.0 CTs)

Busbar (1 Set - 4P + E)

Busbar made up of electrolytic grade high conductivity aluminium

in rectangular cross section and suitable for 415V, FP, 50 Hz, 150 A,

16 kA for 1 sec of required length and cross sectional area.

Digitally signed by AMIT

PROJECT -INTERIOR FITOUT FOR RAILTEL OFFICE, KIDWAI NAGAR, DELHI

PACKAGE - SUPPLY OF LT PANELS

DETAILED BILL OF QUANTITIES

S.NO. DESCRIPTION UNIT QUANTITY RATE

2022 Sub-Incomer :

1 x R,Y,B LED indication lamp with 2A control MCB

1 x ON,OFF,Trip LED indication lamp with 2A control MCB.

1 x 100 A, FP 16kA, MCCB with thermal magnetic based release

with o/l, s/c protection

1 X (Digital flush type class -1.0 accuracy multifunction meter with

RS-485 communication port for measurement of THD, KVARH KW,

KWH, KVAR, PF, V, A, Hz with 3X100/5A, 5VA Class 1.0 CTs)

Sub-Busbar (1 Set - 4P + E)

Busbar made up of electrolytic grade high conductivity aluminium

in rectangular cross section and suitable for 415V, FP, 50 Hz, 150 A,

10 kA for 1 sec of required length and cross sectional area.

Direct Outgoings

4 x R,Y,B LED indication lamp with 2A control MCB

4 x ON,OFF,Trip LED indication lamp with 2A control MCB.

4 x 63A, TPN, 25kA, MCCB with thermal magnetic based release.

3 x (Digital flush type class -1.0 accuracy multifunction meter with

RS-485 communication port for measurement of KVARH KW, KWH,

KVAR, PF, V, A, Hz with 3X60/5A, 5VA Class 1.0 CTs)

Outgoing From Sub-Busbar

7 x 63 A, FP, 10kA, MCB "C Curve".

7 x 40 A, FP, 10kA, MCB "C Curve".

3 x 40 A, DP, 10kA, MCB "C Curve".

Digitally signed by AMIT

PROJECT -INTERIOR FITOUT FOR RAILTEL OFFICE, KIDWAI NAGAR, DELHI

PACKAGE - SUPPLY OF LT PANELS

DETAILED BILL OF QUANTITIES

S.NO. DESCRIPTION UNIT QUANTITY RATE

2022 Incomer :

1 x Type-3 surge arrester with suitable Protection.

1 x R,Y,B LED indication lamp with 2A control MCB

1 x ON,OFF,Trip LED indication lamp with 2A control MCB.

1 x 63 A, TP+2N 16kA, MCCB with thermal magnetic based release

with o/l, s/c and earth fault protection through earth fault module.

1 X (Digital flush type class -1.0 accuracy multifunction meter with