Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.3 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹48.1 L+₹1.2 L (2.50%)Rejected-Finance | L2 | Rejected-Finance Not lowest | |
| 3 | L3₹48.4 L+₹1.5 L (3.15%)Rejected-Finance | L3 | Rejected-Finance Not lowest | |
| 4 | L4₹48.7 L+₹1.8 L (3.89%)Rejected-Finance SREE COLONY BAGDOGRA PO BAGDOGRA DIST DARJEELING WB | L4 | Rejected-Finance Not lowest | |
| 5 | L5₹49.0 L+₹2.1 L (4.43%)Rejected-Finance | L5 | Rejected-Finance Not lowest |
Tender Value
₹43.5 L
EMD Value
₹87,000
Closing Date
13 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SEVOKE ROAD
GE Sevoke Road Post Salugara Dist Jalpaiguri PIN 734008
SPL REPAIR TO BLDG NO P 250 AND P 253 AND P 254 AND CERTAIN LBW AND MINOR WORK AT SEVOKE STN UNDER GE SEVOKE ROAD
2022_MES_538385_1
GE/SEV/19 of 2022-23
Open Tender
Civil Works
Item Rate
180 days
GE SEVOKE ROAD
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
Yes
GE SEVOKE ROAD
₹87,000
Yes
23 Sept 2022
16 Jul 2022
16 Aug 2022
16 Jul 2022
13 Aug 2022
5 Aug 2022
18 Jul 2022 - 27 Jul 2022
Amount
Taking down cement plaster or lime plaster on walls /ceiling of any description from concrete or brick wall etc including raking out joints, hacking for key, scrubbing down with water and disposing off the retreived debris out side MD land including necessary scaffoldings etc complete all as specified and directed
Demolition of cement concrete in ground floors (un-reinforced) and paving not exc. 15cm thickness (below or above ground level) including removing debris outside MD land complete all as specified and directed.
M&L for broken stone boulders Hardcore of gauge exc. 63 mm, but n exc 100mm deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified.
M&L for providing 75mm thick PCC (1:3:6) type C1 (using 20mm graded crushed stone aggregate) as in plinth protection, surface finished even & smooth without using extra cement including provision of 10 mm joints (at an interval of 3 m and turnings) duly filled with fine sand and bitumen in the ratio of 3:1, complete all as specified and directed.
Demolition of brickwork built in cement mortar including disposal of debris, etc outside MD land, complete all as specified and directed.
M&L for brick work with fly ash brick straight or curved on plan exc. 6mtr mean radius, built in cement mortar 1:6, complete all as specified and directed.
M&L for Brick work with fly ash bricks, as in half brick thick wall built in CM (1:4), complete all as specified and directed.
M&L for rendering 15mm thick in cement mortar (1:6) on surfaces of walls including finishing the surfaces even and smooth (without using extra cement) etc, complete all as specified and directed.
M&L for 20 mm thick rendering on fair face of brick work in CM 1:4 in two layers of 10mm each using water proofing compound in top layer only including finishing the surface even and fair(WPC shall be measured and paid seperately) complete all as specified and directed.
M&L for rendering 5mm thick in cement mortar (1:3) to ceiling and finishing the surfaces even and smooth without using extra cement, complete all as specified and directed.
Supply only integral water proofing compound complete all as specified and directed.
M&L for framed work such as grills, gratings etc with ends of bars shouldered and /or riveled, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar works conforming to Fe 290 Gde E-165 complete all as specified and as directed.
M&L for applying two coats of white wash, after preparation of old decorated surface of walls etc complete all as specified and as directed.
M&L for applying two coats of white wash, after preparation of old decorated surface of ceiling etc complete all as specified and as directed.
M & L for preparation of new plastered surfaces of ceiling and applying three coat of white wash, complete all as specified and directed.
M&L for cement concrete of 1:3:6 Type C-1 using 20 mm graded crushed stone aggregate as filling of pressed steel frame, ( lintel capings, hold fast block etc) complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) n.exc 1.5 sqm each complete all as specified and directed
S & F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying and fixing in opening as per specification & drawing complete all as specified and directed.
S&F Factory Made Solid Panel PVC Door Shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet shall be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, as per specification & drawing complete all as specified and directed.
S&F MS butt hinges medium weight cold rolled of size 100mm complete all as specified and directed.
S&F cast iron Nahani trap with grating including jointing to waste pipe of 75 mm dia in and including cement concrete type B1 (1:2:4) complete all as specified and directed.
Dismantling floor, hearth or wall tiling and stone slabs including cement mortar bedding (but not backing), removing rubbish off the premises outside MD Land complete all as specified and directed.
M&L for coloured Non-skid ceramic tiles 7 to 8mm thick (square/ rectangular) of approved size, area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 15mm thick cement mortar screed bed in CM 1:6 etc, complete all as specified and directed.
M&L for coloured 450x300x7 to 8 mm thick glazed ceramic tiles on vertical surfaces such as skirting,dado and risers to steps etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 10mm thick cement mortar backing coat in CM 1:4 etc, complete all as specified and directed.
S&F in repairs, vitreous China, Ist quality, squatting pan (Orissa pattern), of size 580x440mm, white, with and including 'P' or 'S' trap, integral foot rests, lime concrete bedding inlcuding dismantling existing lime concrete bedding, unserviceable connections etc and connecting up, complete all as specified and directed.
S&F in repairs 15mm bore CP fancy type Health faucet with 1.5 meter long tube with CP wall bracket complete all as specified and as directed.
Taking up or down 15 mm bore steel tubing and connections including cleaning for re-fixing or removal to store complete all as specified.
Taking up or down 20 mm bore steel tubing and connections including cleaning for re-fixing or removal to store complete all as specified.
Taking up or down 25mm bore steel tubing and connections including cleaning for re-fixing or removal to store complete all as specified.
S&F 15 mm bore medium grade galvanized steel water tubing concealed with all fittings and fixed to wall/ceiling or laid in floor complete all as specified. Note:- Cutting chases & making good shall be measured seperately.
S&F 20 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all as specified.
S&F 25 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all as specified.
Cutting chases in brickwalls girth exc 10 cm but n exc 20 cm , pinning in making good to facings where required and pointing in cement mortar 1:3 for conceal water tubing etc and making good complete all as specified.
S&F in repairs wash hand basin, vitreous china white of size 550x 400mm including brackets,32mm dia waste fitting brass chromium plated and PVC waste pipe 32mm bore complete all as specified and directed.
M&L for sunken floor treatment by roughening of sides and bottom of sunken floor by picking,sweeping clean and washing down with water to remove dust etc. and 10mm thick rendering in CM(1:4) on concrete surface (bottom & sides of sunken floor) finished fair and even mixed with liquid water proofing compound 'conplast X 421 IC' mfd by M/S FOSROC chemicals (india) pvt ltd,priming coat of "Nitro proof 100" and after drying of primer applied one coat of 'Nitro proof 120' mfd by M/S FOSROC complete all as specified and directed.
S & F in repairs flushing cistern, 10 Ltrs. Capacity, PVC valveless, syphonic action type with dual flushing system, low level,white with inlet, ball valve,float and handle including brackets, flush pipe of PVC 32mm dia complete all as specified and directed.
S&F 15mm bore two way bib cock, cast copper alloy with crutch or butterfly handle, fancy type, chromium plated, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F Stop valve, 15mm bore cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle, fancy type, chromium plate, with long shank and cup (concealed type) complete all as specified and directed.
S&F 15mm bore bib taps, cast copper alloy with crutch or butterfly handle, fancy type, chromium plated, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repairs 15mm size PVC connection with PTMT nuts 450mm length, complete all as specified and directed.
S&F in repairs brass chromium plated, shower rose, 125mm size, complete all as specified and directed.
S&F towel rail 600mm long of PTMT (min weight 190 grams) fixed with and including chromium plated brass screws and wooden / plastic cleats, complete all as specified and directed.
S&F 32mm bore high density polyethylene pipes (LDPE) of pressure rating 6 Kgf / cm2, fixed to walls, ceiling or laid in floors etc, complete all as specified and directed.
Taking down CI/PVC soil/waste and vent pipes of any length any size including fittings including cutting of holes wherever required complete all as specified and directed.
S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed.
S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified & directed.
S & F 110 mm bore PVC (SWR) branch piece single (Single `Y') equal or unequal with access door complete all as specified & directed.
S & F 110 mm bore PVC (SWR) Vent cowl complete all as specified & directed
S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed.
S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified & directed.
S & F 75 mm bore PVC (SWR) branch piece single (Single `Y') equal or unequal with access door complete all as specified & directed.
S & F 75 mm bore PVC (SWR) Vent Cowl complete all as specified & directed
M & L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over one coat of primer over and including 1-2 mm thick wall care putty ,complete all as specified and directed.
M & L for complete removal of existing surfaces of wall and applying two coats of oil bound distemper over one coat of primer over and including 1-2 mm thick wall care putty,complete all as specified and directed.
M&L for preparation of new plastered surface of walls and applying two coats of weather proof exterior emulsion paint over a coat of primer over and including 1-2 mm thick wall care putty complete all as specified and directed
M & L for complete removal of existing surfaces of wall and applying two coat of weather proof exterior emulsion paint over a coat of primer over and including 1-2 mm thick wall care putty complete all as specified and directed
M&L for PCC(1:2:4) type B-0, (using 12. 5 mm graded csushed stone aggregate) as in chajjas to achieve required slope including formwork making rounded chamfered on edges mixed with WPC @ 2% by weight of cement, complete all as specified and directed. Note: WPC shall measured and paid separately.
M&L for RCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in slabs, landings, shelves complete including necessary formwork complete all as specified and directed
Demolition of reinforced cement concrete of any description and in any position (RCC water tank, kitchen chimney etc) complete and removing the retreived debris out side MD land, complete all as specified and directed.
S&F Rotational moulded polyethylene water storage tanks 1000 Litre capacity double layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including provision of necessay fittings for connection the overflow, drain out, inlet and outlet pipes, complete all as specified and as directed.
S&F Ball brass valves of size 20 mm bore high pressure, the polythene float and fly nut, screwed for iron pipe or brass ferrule etc, complete all as specified and directed.
S&F in repair 25mm bore gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipes, complete all as specified and directed.
S&F in repairs vitreous china urinal bowl type (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement including automatic flushing cistern with brackets, flush tpipe, grating and union for discarge pipe complete all as specified and as directed. (Exclusive of fixing supply pipe to flushing cistern trap and waste pipe)
Roughening surfaces of existing roof treatment and taking out old APP membrane and removing from site including cleaning and washing down with water to remove dust etc complete all as directed.
M&L for providing, laying water proofing treatment over plastered surfaces of RCC roof shall be as under:- (a) The dried plastered surface of slab shall be painted with one coat of bituminous primer @0.4 liter/Sqm. (b) Over the primed surface a layer of APP based polymeric membrane minimum weight of 3 kg/sqm of approved manufacturer minimum 3mm thick, reinforced with polyster non woven fabric (weighing not less than 160gms/sqm) shall be laid by torch application method. The side over laps of membrane shall be minimum75mm and the end laps shall be minimum 100mm and sealing all overlaps and joints shall be done as per manufacturer's instruction. (c) The finished surface shall be given Aluminium paint @ 0.11 Kg/Sqm on APP as per manufacturer's instructions. Make:-M/S TEXSA INDIA LTD (MOPLY-FP) / M/S STP LIMITED (SUPER THERMOLAY) / IWL INDIA LIMITED (HYPERPLAS)/M/S Tiki Tar Danosa (India) Pvt Ltd (Hydro Stop)/M/s Supreme Bituchem India Pvt Ltd (Super Shield)
M&L for 20 mm thick rendering in Cm (1:4) over RCC roof surface to receive roof treatment finished even and smooth without using extra cement mixed with water proofing compound as per manufacturers instruction (WPC shall be measured and paid separately).
M&L for 40 mm thick cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in roof padding finished even and smooth using extra cement complete all as specified.
Excavation in trenches not exc 1.5 Mtr wide and not exc 1.5 Mtr deep in soft/loose type for pipes and manholes complete all as specified and directed.
All as per item No 68 but exc . 1.5m and n.exc 3.0m complete all as specified and as directed.
Excavation over areas, n exc 1.5 m depth for sewage sump and getting out in soft/loose soil complete all as specified and directed.
Excavation over areas, exc 1.5 m depth but n.exc 3.0m depth for sewage sump and getting out in soft/loose soil complete all as specified and directed.
Excavation over areas, exc 3.0 m depth but n.exc 4.5m depth for sewage sump and getting out in soft/loose soil complete all as specified and directed.
M&L for 15mm thick rendering with neat finish using exta cement with (CM 1:4) complete all as specified and directed.
M&L fo PCC 1:3:6 (type C-2) (using 40mm graded crushed stone aggregate) as in bed for drain pipes including packing under and hauncing against the sides of pipes after they are laid and tested for 300mm bore pipe complete all as specified and directed.
M&L for 300 mm nominal dia DWCPE pipe (SN-8) pipes ISI marked laid in trenches and jointed complete as specified and directed.
M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 meter mean radius built in CM 1:6 complete all as specified and as directed.
M&L cement concrete 1:3:6, type C-2 (using 40 mm graded crushed stone aggregated) as in foundation, filling and mass concrete complete all as specified.
Removal of surplus soil to a distance not exc 60m and depositing where directed at a level not exc 1.5m above the starting point all as specified and as directed.
Returning,filling in,including spreading,levelling,watering and well ramming in layers not exceeding 25 cm thick all as specified and as directed.
M&L for RCC M25 (Design mix) in slabs supported on walls, beams, columns and Chhajja in floors, roofs, landings, balconies, canopies, deck slabs and in shelves including necessary form work and the like complete all as specified and as directed.
M&L for RCC M25 (Design mix) in walls,retaining walls, basement walls and the like, any thickness above top of footings, including attached pilaster and buttresses including necessary form work and moulds complete all as specified and as directed.
M&L for RCC M25 (Design mix) in foundation, including rafts, footings, foundation beams, plinth beams, bases for columns etc, basement slabs, under-reamed piles and mass concrete including necessary form work complete all as specified and as directed.
S&F mild steel TMT bars 6 mm to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for column, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire annealed, not less than 0.9mm dia or securing with clips complete all as specified.
M&L for reinforce concrete pipes 450 mm bore class NP2, laid and jointed with collars complete all as specified.
M&L for Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including pillasters, buttresses etc vertical or to batter rough finished flat surfaces complete all as specified and as directed.
Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (horizontal or vertical) rough finished flat surfaces complete all as specified and as directed.
M&L for hard packing (any thickness) with broken stone or boulders at back of walls over arches etc and rasing (or lowering) to the required level complete all as specified and as directed.
M&L for 200mm width and 6 mm thick PVC water bar providing in RCC casting to prevent leakage in RCC joints complete all as specified and as directed.
M&L fo PCC 1:3:6 (type C-2) (using 40mm graded crushed stone aggregate) as in bed for drain pipes including packing under and hauncing against the sides of pipes after they are laid and tested for 450mm bore pipe complete all as specified and directed.
M&L for 100mm thick PCC 1:2:4 (type B-2) (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed.
M&L for providing 75mm thick PCC 1:4:8 (type D-2) (using 20mm graded crushed stone aggregate) as in sub base of floors complete all as specified and directed.
M&L for machine cut kota stone slab flooring 18-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing fixed as in stair, window cill, shelve etc including 15mm thick screed bed or beding layer of cement motor 1:6 of fixing of stone complete all as specified and directed.
M&L 20mm thick granite slabs of any type (table rubbed and polished) on cooking platforms set and jointed in net cement slurry and pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite including necessary moulding at edges laid over and including 15mm thick cement mortor screed bed in cement mortor (1:3) complete all as specified and directed.
M&L for coloured Non-skid ceramic tiles 7 to 8mm thick (square/ rectangular) of approved size, area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 15mm thick cement mortar screed bed in CM 1:6 etc, complete all as specified and directed.
M&L for coloured Non-skid ceramic tiles 7 to 8mm thick (square/ rectangular) of approved size, area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm in Skirting etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 15mm thick cement mortar screed bed in CM 1:6 etc, complete all as specified and directed.
Roughening surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified.
.Supply, installtion, commissioning and testing of Non -clogging submerssible pump set rating 7.5 HP, pump type three phase 415 volts, 50 Hz including lowering of column pipe line & submersible cable of any size and length (stage by stage) carefully with the help of necessary tools and tackles, including providing PVC insulated steel rope (stranded) of 10 mm dia, duly fixed with the motor pump set U bolts and clamps of size fixed on the clamps for mechanical support for the motor pump set anchoring outside the sumpwell of suitable length connecting of all electric and water connections with new nuts bolts washers and rubber gasket and testing on load upto the entire satisfaction of engr-in-Charge complete all as specified and directed. (Note : MS Column pipe & submersible cable shall be measured and paid separateley)
Supply only MS Column pipe 80mm bore dia heavy grade with all fittings required at site complete all as specified and directed.
S & F cast iron Non return Valve 80mm bore PN 1.6 with Stainless steel spindle nuts, bolts, washers and rubber gasket sheet for packing fixed at any position all as specified and directed by Engr-in-Charge
Supply only flat submersible motor cable, three core, copper conductor of size 6.0 Sqmm all as specified and directed.
TAPASH SAHA
LIBERAL ENGINEER CONSTRUCTION
M/S S.B. CONSTRUCTION
SRI SURAJIT SENGUPTA
M/S HARMANS
Raj Enterprise
M/S DUTTA & DAS ENGINEERING CO.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .