COMPREHENSIVE MAINTENANCE INCL E/M TO CERTAIN MD ACCN ZORAWAR MARG AREA UNDER AGE B/R-II AT ITARANA CANTT ALWAR

Amount

Taking down cement plaster of any description on walls or concrete surfaces, including raking out joints, hacking for key, scrubbing down with water, and removal of debris upto 1.0 Km from site etc complete all as specified & directed.

M&L 15mm thick cement plaster on external surface in CM 1:4 mixed with WPC @ 3% by weight of cement including finishing fair & smooth (Without using extra cement) etc complete all as specified and directed.

M&L for 10mm thick cement plaster in CM 1:6 on fair faces of brick work or concrete surface finished even and smooth without using extra cement etc complete all as specified and directed.

M&L for rendering 5 mm thick in CM (1:3) as in ceiling and finish the surface even and smooth without using extra cement etc complete all as specified and directed.

M&L for Rough cast plaster on exterior walls applying the under coat of cement and sand mortar 1:3 not less than 10mm thick and while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel aggregate (size between 6 to 12mm ) mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished even. The mix of cement and sand shall made slightly wetter than normal for rendering to ensure that larger aggregate are thoroughly covered complete all as specified and directed.

Supply only water profing compound etc complete.

M&L for preparation of newly plasterd/ unplastered surface of wall and applying two coat of cement base paint over a coat of alkali resistant primer etc complete all as specified and dircted.

M&L for preparing newly plastered/ unplastered surface of ceiling & applying three coat of white wash on ceiling etc complete all as specified and directed.

M&L for preparing newly plastered/ unplastered surface of wall & applying three coat of white wash on wall surface etc complete all as specified and directed.

M&L for preparation of new plastered/ unplastered surfaces of wall & applying two coats of distemper oil emulsion over a coat of primer etc complete all as specified and directed.

M&L for preparation of new plastered/ unplastered surfaces of wall & applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm etc complete all as specified and directed.

Dismantling of old app membrane on roof surfaces including screed bed and removal of debris upto 1.0 Km from site etc complete all as specified and directed.

M&L 10mm thick rendering in CM 1:4 with water proofing compound @ 3% of weight of cement over concrete surface (WPC will be measured and paid seperately), surface finished even and smooth etc complete all as specified and directed.

M&L for PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) as in roof padding, laid to a minimum consolidated thickness of 25 mm as leveling course, laid and compacted in min slope 1:30 over roof incl necessary form work etc complete all as specified and directed.

S&F APP based polymeric membrane not less than 3mm thick, weighing not less than 3.5 Kg/sqm , reinforced with polyster non-woven fabric (weighing not less than 150 gm/sqm) . It shall be laid by torch application, side overlaps shall be 75mm and the ends shall be 100mm and all over laps shall be sealed by torch application including applying a coat of cold applied bitumen primer conforming to IS:[email protected]/sqm.

M&L for providing and injecting chemical emulsion for post constructional anti termite treatment alongwith the external wall below concrete or masonry apron using chemical emulsion at the rate of 2.25 litre peri linear meter incl drilling and plugging 12mm dia holes with CM 1:2 to match the existing floors drilling and plugging holes etc all as specified and directed

Demolition of concrete (unrreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing debris to location outside defence land complete all as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and remove the debris upto 1.0 Km from the site etc complete all as specified and directed.

M&L cement concrete 75mm thick 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of floor complete all as specified & directed.

M & L for 25mm thick cement concrete (1:2:4) type B0 using 12.5 mm thick graded stone aggregate as in base or sub-base or as in floor etc finished even & smooth or rough including necessary form work complete all as specified and directed.

M&L for Vitrified tiles (dark shade / double charged/ Ultra charged) 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm as in floors etc. laid over and including 15 mm screed bed or bedding layer in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile etc complete all as specified and directed.

All as per srl item no 95 above but as in skirting, dado or as in vertical surface etc. over 10 mm rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile etc complete all as specified and directed.

M&L for non skid ceramic tiles (coloured) 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc.laid over and including 15 mm screed bed or bedding layer in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile etc complete all as specified and directed.

M&L for non skid ceramic tiles (coloured) 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but n exc 0.18 in floors etc. laid over 15 mm screed bed or bedding layer in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile etc complete all as specified and directed.

All as per srl item No 24.00 above but as in skirting, dado or as in vertical surface etc. over 10 mm thick rendering in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile etc complete all as specified and directed.

M&L for Glazed coloured ceramic tiles in vertical surface 7mm thick of any size as directed over 10 mm rendering in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile etc complete all as specified and directed.

M&L machine cut kota stone slab flooring 20-25mm thick over 20 mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified& directed

M&L for Mirror polishing on marble/ granite/Kota stone/ stone work where ever required to give high gloss finish etc complete all as specified and directed.

M&L for 18-20mm thick machine cut Granite (of any type) work, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over screed bed of 20 mm thick in CM 1:6 complete all as specified and dirtected.

Demollition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles etc complete all as specified and directed.

M&L for brick work with Old size Fly ash ’ bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for Brickwork with Old size Fly ash bricks, straight or curved on plan to any radius in half brick thick built in cement mortar 1:4 complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or discription) from wooden/ metal/ aluminium frames including punching or drilling out old glazing pins/spring clips and beading etc incl removal of debris upto 1.0 Km from site etc completet all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each pane etc complete all as specified and directed.

S&F 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each pane etc complete all as specified and directed.

S&F 3 mm thick Figured glass, pin head type and glazing with oil putty in square n exc 0.50 Sqm in each pane etc complete all as specified and directed.

S&F in repair 300 mm long Aluminium alloy anodised sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed not less than 12mm dia with and incl minimum of 06 bolt and nuts four on bolt plate and two on staple plate complete all as specified and directed

S&F in repair 150mm length of cover plate floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor complete all as specified and directed

S&F in repair 150 mm long Stainless steel/ Aluminium anodised, barrel tower bolts of extruded section and fixed to frames/shutter or any place as specified complete all as specified and directed.

S&F in repair 100 mm long Stainless steel/ Aluminium anodised, barrel tower bolts of extruded section and fixed to frames/shutter or any place as specified complete all as specified and directed.

S&F in repair 150 mm long Stainless steel/ extruded aluminium alloy fabricated type anodised aluminium handles fixed to shutter or any place as specified complete all as specified and directed..

S&F in repair 100 mm long Stainless steel/ extruded aluminumalloy with galvanised mild steel hinge pin, Butt hinges fixed to shutter or any place as specified complete all as specified and directed.

S&F in repair Alumninium (extruded section body) Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 o 850 mm in width and of weight between 36 to 60 kg and fixed fixed etc complete all as specified and directed.

S & F in repair MS 300mm size, ordinary rat tail rod (Helical door spring) pattern springs including roller and roller plate fixed to shutter or any place as specified etc complete all as specified and directed.

S&F in repair chromium plated stainless steel Peg set (Cloth hanger) 6 pin for hanging of cloth fixed with necessary accessories etc complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples to wooden frames with beading and all other necessary items etc complete all as specified & directed.

S&F in repairs Stainless Steel drapery rod of 20 to 25 mm inner dia (in length as directed ) with & including decorative knob at both ends and pair of Stainless steel fancy type brackets fixed at both ends with PVC rawl plug & steel screws on walls/beams including PVC curtain rings of matching with rod colour @10 cm c/c all as specified and directed

M&L for taking down and refixing aluminium/wooden/steel window/door shutter n exc 2.5 sqm each in the same opening after repair/replacement/changing defected/ unservicable of anodised aluminium handle, hinges, locking device, roller , joining cleats, glazing clips, rubber neoprene packing, beading, screws etc complete all as specified and directed. Note :- (i) The rate quoted under this item deemed included for necessary jointing cleates, glazing clips, alluminium beading, screws, rubber packing, locking device, handles, honges, locking accessories, roller for sliding windows etc & other small fitting. However, no element on account of weight will be taken into consideration for these item. (ii) Section of aluminium and glass, wire mess for repair/replacement shall be provided as per existing make and will be paid separatly if required as per site.

S&F in repair vitreous china squatting pan of 'Orrisa' pattern' size 580mm x 440mm white with integral foot rest including P/S trap (excluding flushing cistern and flush pipe) but including connecting the all pipes and incluidng provision of lime concrete bedding to fixed the all components of WC etc complete all as specified and directed.

S&F in repair vitreous china wash down water closet (Pedastal pattern) 'white' (excluding flushing cistern and flush pipe but incuding plastic seat cover as required colour and Jet spray) including connection to drain or out going pipe and to flushing pipe anti syphonage pipe etc and making good to floor complete all as specified and as directed.

Supply and fixing in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and including flush pipe of polythene of low or high density ISI marked etc complete all as specified and directed.

S&F 15 mm bore galvanised steel tubes medium grade with all necessary fitting and fixed to walls and ceiling or laid in floor incl taking out old GI tubes alongwith fittings etc complete all as specified and directed.

S&F 20 mm bore galvanised steel tubes medium grade with all necessary fitting and fixed to walls and ceiling or laid in floor incl taking out old GI tubes alongwith fittings etc complete all as specified and directed.

S&F 25 mm bore galvanised steel tubes medium grade with all necessary fitting and fixed to walls and ceiling or laid in floor incl taking out old GI tubes alongwith fittings etc complete all as specified and directed.

S&F in repair 15mm dia fancy type stop valve/ angle valve chromium plated cast copper alloy , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed.

S&F in repair 15 mm bore fancy type long body Bib taps, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed etc complete all as specified and directed.

S&F in repairs 15 mm bore Brass CP mixer for Sink/WHB (swan neck patern) for mixing hot & cold water screwed down for iron pipe and fixed to pipes etc complete all as specified and directed.

S&F in repairs sink made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or incluidng fixing contilever brackets and connecting union to pipe over all size 495mmx420mm bowl size 410mmx330mmx160mm etc complete all as specified and directed.

S&F in repair Sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or incluidng fixing contilever brackets and connecting union to pipe over all Size 915mmx460mm bowl size 410mmx330mmx160mm. etc complete all as specified and directed.

S&F in repair tuffened corner acrylic shelf 6mm thick with brass chromium plated guard and fixing arrangements complete of size 300 mm complete all as specified.

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25mtr to 1.50 mtr long flexible tube and ABS wall hook including making connections and fixed in position in all respect etccomplete all as specified & directed.

S&F in repairs 15mm bore Two way Angle valve chromium plated screwed down,high pressure with capstan heads screwed both ends for iron pipe or for union etc complete all as specified and directed.

S&F in repair Brass CP wall mixer 3 in 1 with L-Bend mixing hot & cold water screwed down for iron pipe or for union and fixed etc complete all as specified and directed.

S&F in repair 32 mm bore Waste coupling of PTMT (half or full threaded) (Minimum weight for 32mm - 45gms) etc complete all as specified and directed.

S&F in repair WHB flat back of SIze 580x450mm excluding taps waste chain and plug porcelain stopper but incl brackets and waste pipe including cutting for and pinning in ends of brackets or erecting stand etc complete all as specified and directed.

S&F in repair brass chromium plated fancy type shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union etc complete all as specified and directed.

S&F in repair 15mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc complete all specified and directed .

S&F in repair Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 15mm bore complete all specified and directed . .

S&F in repair Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 20mm bore complete all specified and directed ..

S& F 1000 Ltr capacity of rotational moulded polyethylen water storage tank (Cylindrical vertical with closed tap) hoisted and fixed in position including 20mm dia Ball brass valves, high pressure, with polythene float and flynut complete and 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600 mm long with all fitting, incl tank nipple and other fittings and including dismantling of old water storage tank from existing surface alongwith etc complete all as specified and directed.

S& F 500 Ltr capacity of rotational moulded polyethylen water storage tank (Cylindrical vertical with closed tap) hoisted and fixed in position including 20mm dia Ball brass valves, high pressure, with polythene float and flynut complete and 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600 mm long with all fitting, incl tank nipple and other fittings and including dismantling of old water storage tank from existing surface alongwith etc complete all as specified and directed.

S&F in repair PVC connection of 15mm dia with PTMT nuts of length 600mm etc complete all as specified and directed.

S&F in repair Brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges including all fittings and fixture etc complete all as specified and directed.

S&F in repair Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) etc complete all as specified and directed.

S&F in repair white or colour Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed.

S&F in repairs stainless steel grating doom of size 75mm dia etc Complete all as specified and directed.

S&F in repairs stainless steel grating doom of size 100mm dia etc Complete all as specified and directed.

S&F in repairs flexible/ collapsible or rigid pvc waste pipe of 32 to 40mm dia etc Complete all as specified and directed.

S&F in repairs Jet spray PVC butterfly plated for EWC with & including PVC connection 600 mm long suitable for 15 mm bore GI pipe with PTMT nut & nipple etc complete .

S&F in repairs for PVC internal fittings (kit) complete for low level flushing cistern tank, all as specified and directed.

S&F in repairs plastic water closet seat cover white /coloured closed pattern with flat bottom and mild steel CP or aluminium hinging device complete all as specified and directed.

Supply and replacement in repairs of brass spindles, phases of brass of any size required for bib taps, pillar cocks, stop cocks, angle valves, concealed valves etc complete all as directed.

S&F in repairs 20 mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified & directed

S&F in repairs mirror cabinet (PTMT) fixed on wall with chromium plated brass screws etc complete all as specified and directed.

S&F in repairs stainless steel kitchen plate rack fixed on wall with chromium plated brass screws etc complete all as specified and directed.

Running welding in repairs not exceeding 6mm thick all as specified and directed

Welding in repairs not exceeding 6mm thick and not exceeding 2.5 cm in length all as specified and directed

S&F in repair Soap dish any type of chromium plated as directed etc complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) etc complete all as specified and directed.

S&F PVC (SWR) pipes of 75 mm nominal outside diameter single socketed in any length with rubber ring joints laid in trenches or in floors etc complete all as specified and directed.

S&F PVC (SWR) pipes of 110 mm nominal outside diameter single socketed in any length with rubber ring joints fixed to wall incl brackets or hold fastner etc complete all as specified and directed.

S&F PVC (SWR) bend 75mm bore of any radius etc complete all as specified and directed.

S&F PVC (SWR) bend 110 mm bore of any radius etc complete all as specified and directed.

S&F PVC (SWR)110mm Branch piece (single Y ) equal or unequal etc complete all as specified and directed.

S&F 110mm size of PVC(SWR) Vent Cowl etc complete all as specified and directed.

S&F in repair 75mm dia PVC (SWR) floor trap, plain with grating including joining with solvent cement etc complete all as specified and directed.

Treatement for sunken portion is as follows :- (i) Demolition of lean concrete and other type of filling in sunken portion & cleaned the sunken portion incl vertical wall surface complete as directed. (ii) M&L for providing 12 mm dia holes of 40mm deep @2.00m c/c at junction of beams and columns as co-ordinal points for inserting/pouring cement slurry by pressure grouting for sunken floors of toilet , includind sealing the holes with CM 1:3, all as specified and as directed by Engineer - in - Charge. (iii) M&L for water proofing plaster for sunken portion in CM 1:3, 20 mm thick in two coats with water proofing compound at the rate of 2% by weight of cement and finishing the surface even and smooth without using extra cement. (iv) M&L for applyin evenly two coats of industrial bitumen 85/25 at the rate of 1.20 Kg/Sqm in each coat over vertical surfaces and floors of sunken floors of toilet including cleaning of surfaces. (v) M&L for PCC 1:7:12 type D2 using 40 mm graded stone aggregate as in filling (sunken portion). etc. (vi) M&L for PCC 1:2:4 type B0 using 12.50 mm graded stone aggregate, mixed with WPC @ 2% by wt. of cement, as sub base, 75mm thick. on top (vii) M&L for plastering in CM 1:4, 15 mm thick with water proofing compound at the rate of 2% by weight of cement and finishing the surface seven and fair Note :- Above includes (a) Test again of water tightness by pounding for 72 hours & rectify defects if any till total elimination of defect. (b) The sunken portion shall be tested for leakage / seepage / dampness by pounding with water for 72 hours. In case any defect is noticed the portion shall be grouted with cement slurry mixed with suitable chemical & tested again. The process of grouting and testing shall be repeated till leakage / seepage / dampness is eliminated. (c) Horizontal flat area to be measered.

Taking down chowkats or frames with shutters (without taking off shutters frome the frames) n exc 1.5 sqm each complete all as specified & directed.

Taking down chowkhats or frames with shutter (without taking off shutte from the frame) exc 1.5 Sqm and not exc 4 Sqm each complete all as specified & directed.

Taking down shutter of any description exc 01 sqm but n exc 2 sqm each complete all as specified and direct.

Taking down and refixing in the same opening after necessary repairs work like easing, adjusting and refixing of building hardware in shutter of any description n exc 1.0 sqm each complete all as specified and direct.

M&L for mild steel framed work as in door frames and gauge shutters made of angle or hallow/square/rectangular/circular section and other covering door to be prepared for handing or sliding with including either hooks , purposely made sliding door bolt , hinges or handles fittings (exclusIve of steel or other covering, running rails and guides) and hanging also fastening and fixing , necessary arrangements for fixing of wiremesh, necessary bolting including welding complete conforming to FE-290 Gde E-165.

S&F Welded steel wire fabric weight n exc 4.0 kg per sqm fixed fixed to wood or steel members with screws or welded as directed etc omplete all as specified and directed.

S&F 35 mm thick Factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specifed and directed

S&F for factory made 2nd class hard wood glazed and skelton door shutter made out of stiles & rails of 30mm thick 2nd class hard wood, klin seasoned and chemically pressure treated & open reabted and prepared to receive glass, gauge etc (without sash bars), edges of framing plain,chamfered of rounded, fitted with cut and mitred beads for securing glass etc complete all as specified and directed.

S&F powder coated (Thickness of powder coating not less than 50 micron) anodised aluminium frame and other sections for doors, windows, ventilators, partitions of any colour as approved with one or more rebates incl joining cleat for fixing etc. complete all as specified & as directed.

S&F anodised aluminium door, window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays, hinges, handles, bolts, etc as directed in numbers etc for each shutter complete all as specified & as directed.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples to wooden frames with beading or metal frame with welding and all other necessary items etc complete all as specified & directed.

Supply and fixing 5.5mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified.

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. (Note: stainless steel butt hinges shall be paid separately)

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantas and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.

S&F 100 mm long extruded aluminumalloy with galvanised mild steel hinge pin, or stainless steel hinges (as directed by Engr-in-Charge) Butt hinges fixed to frame with stainless screw or welded to frame as required etc complete all as specified and directed.

S&F 150 mm long Stainless steel/ Aluminium anodised, barrel tower bolts of extruded section and fixed to frames/shutter or any place as specified complete all as specified and directed.

S&F 150 mm long Stainless steel/ extruded aluminium alloy fabricated type anodised aluminium handles as directed by Engr-in-Charge fixed to shutter or any place as specified complete all as specified and directed.

S&F retractable door hinge including all the necessary screws and welding for fixing and including all the activities to make the door workable complete all as specified and directed.

S&F 300 mm long Aluminium alloy anodised sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed not less than 12mm dia with and incl minimum of 06 bolt and nuts four on bolt plate and two on staple plate complete all as specified and directed

S&F 150mm length of cover plate floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor complete all as specified and directed

S&F MS 300mm size, ordinary rat tail rod (Helical door spring) pattern springs including roller and roller plate completeetc complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint complete all as specified and directed.

S & F in repair plastic over head water storage tank cover for 500/1000 Ltr weight of cover not less than 900gms and shape of cover as required at site etc complete all as specified and directed.

S & F in repair magic eye bosney safety door viewer 2 inch 180-degree suitable for door for see into the door etc complete all as specified and directed.

S & F in repair buffer door closer (Door stopper) suitable for skelton/pannel/flush door etc complete all as specified and directed.

Disconnecting & dewatering of PVC over head water storage tank, scrubbing the inner suraces, cleaning & removing all scales, dirt etc from mouth of circulating pipes, washing the tanks with fresh water and disinfecting the same by flushing with liquid chlorine or any other equivalent chemical, reconnecting & refixing in position after cleaning for tank capacity 500/1000 Ltrs including marking with white paint and stencil all as required & directed. Note: (i) Cleaning shall be doen through wash out pipe by marking suitable arrangement to outlet pipe such as cutting of the pipe providing short piece of pipe fitting and union coupling etc where washout pipe are not existing. The dirt shall not be allowed to enter the water supply system. (ii) The quoted rates are deemed to include items incorporates use of any material for completing above task to the satisfaction of Engr-in-Charge.

M&L Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 or E-165

Taking down carefully copper/aluminium point wiring of any size (light, socket or power) complete (fittings such as switches, ceiling roses, pendants, regulatos, sockets etc to be measured separately), and making good disturbed surfaces of walls, floors etc to match with existing surfaces.

Taking down MCB with sheet metal enclosure, main switch, DB etc and making good disturbed surfaces to match with existing surfaces.

Taking down sub main wiring of any size/capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces

Taking down carefully by unscrewing from boards /outlet boxes fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, building security lights with brackets, ceiling fittigs 2x2 LED, bulk head fittings, tube light any Type, Bed Side Lights, Modular Switch Sockets, Modular Sheet Metal Flush Boxes, Fan Regulators any Type etc complete all as specified and directed by Eng-in-charge

M&L for concealed Point wiring in repair for One Light point controlled by one, one way switch with two single core PVC insulate, unsheathed multistranded copper conductor cable of size 1.5 sq.mm (FRLS) drawn in and including electrical grade PVC conduit 20 mm dia concealed on wall/ceiling/floor including PVC insulated unsheathed earth wire with multi stranded copper conductor of size 1.5 sq.mm(FRLS) including MS shunk sheet metal box with 3 mm thick bakelite plastic laminated sheet top cover with brass counter shunk screws tith washer complete all as specified. Note - quoted rate shall include making good to the disturbed surfaces including plastering and painting to match with the existing colour.

All as per srl item No 131.00 but for One 3 pin switch socket outlet, 5 Amp on the same board with other switches.

All as per srl item No 131.00 but for One 3 pin 5 amps switch socket outlet point on independent board.

All as per srl item No 131.00 but for One bell/buzzer point controlled by one bell push.

All as per srl item No 131.00 but for Two way point controlled by two way switch.

All as per srl item No 131.00 but for One ceiling/exhaust fan point controlled by one switch and regulator

All as per item srl item No 131.00 here in before but wiring with 2.5 sqmm multistranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power/geyser point.

Material and labour for point wiring for One Light point controlled by one, one way switch with 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLSH cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLSH cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including PVC Casing & Capping with accessories fixed on surface of walls/ceiling by means of PVC sleeves/dash fasteners with cadmium plated screws, all as per IS, terminated in existing/New wooden terminal box for mounting fittings like switches, sockets, regulators etc with and including new 3 mm thick phenolic laminated sheet top cover, fixed on top of terminal box complete, all as specified & directed.

All as per srl item No 138.00 but for One ceiling/exhaust fan point controlled by one switch and regulator

All as per srl item No 138.00 but for One 3 pin switch socket outlet, 5 Amp on the same board with other switches.

All as per srl item No 138.00 but for One 3 pin 5 amps switch socket outlet point on independent board.

All as per srl item No 138.00 but for One bell/buzzer point controlled by one bell push.

All as per srl item No 138.00 but for Two way point controlled by two way switch.

All as per item srl item No 138.00 here in before but wiring with 4 sq.mm multistranded cable and earth wire with copper conductor of size 4 sq.mm for 15 amps power point.

M&L for concealed Point wiring for One Light point controlled by one, one way switch with single core PVC insulated, unsheathed multistranded copper conductor cable of size 1.5 sq.mm (FRLS) drawn in existing conduit /Existing Casing Caping including PVC insulated unsheathed earth wire with multi stranded copper conductor of size 1.5 sq.mm(FRLS) including MS shunk sheet metal box with 3 mm thick bakelite plastic laminated sheet top cover with brass counter shunk screws with washerc complete all as specified. Note - quoted rate shall include making good to the disturbed surfaces including plastering and painting to match with the existing colour.

All as per srl item No 145.00 but for One ceiling/exhaust fan point controlled by one switch and regulator

All as per srl item No 145.00 but for One 3 pin switch socket outlet, 5 Amp on the same board with other switches.

All as per srl item No 145.00 but for One 3 pin 5 amps switch socket outlet point on independent board.

All as per srl item No 145.00 but for One bell/buzzer point controlled by one bell push.

All as per srl item No 145.00 but for Two way point controlled by two way switch.

All as per item srl item No 145.00 here in before but wiring with 4 sq.mm multistranded cable and earth wire with copper conductor of size 4 sq.mm for 15 amps power point.

S&F in repair Piano type switch single pole 1 way 5/6 amps 230 volt AC supply complete all as specified and directed by Engr-in-Charge.

S&F in repair Piano type switch single pole 2 way 15/16 amps 230 volt AC supply complete all as specified and directed by Engr-in-Charge.

S&F in repair Piano type switch single pole 1 way 15/16 amps 230 volt AC supply complete all as specified and directed by Engr-in-Charge.

S&F in repair Ding Dong Bell along with bell push flush type 5 amps complete all as specified and directed by Engr-in-Charge.

S&F in repair socket two in one 6/5 Pin 5 Amps 230 volt AC supply complete all as specified and directed by Engr-in-Charge.

S&F in repair socket two in one 6/5 Pin 15/16 Amps 230 volt AC supply complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair Switch socket combination 2 in 1, 5 A, 3 Pin flush type inc taking down old onecomplete all as specified and as directed.

Supply and fix in repair Switch socket combination 5A/16A, 5 in 1 inc taking down old one complete all as specified and as directed.

Supply and fix in repair Switch socket combination 2 in 1, 5 A, 3 Pin with Modular box, flush type inc taking down old onecomplete all as specified and as directed.

Supply and fix in repair Switch socket combination 5A/16A, 5 in 1 with Modular box type inc taking down old one complete all as specified and as directed.

S & F in repair stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified and directed by Engr in charge.

Supply and fixing in repair Modular switch, one way 6 Amp, 1 module, piano type, 230/250 volts grade on top covers (catered in point wiring above).

All as per srl item No 163.00 but for Modular switch, two way 6 Amp, 1 module

All as per srl item No 163.00 but for Modular switch, one way 16 Amp, 1 module

All as per srl item No 163.00 but for Modular bell push 6 Amp, 1 module

Supply and fix in repair Modular socket outlet 2in1, 3pin 5A, 2 module multipurpose use, flush mounting type, 230/250 Volts grade on Top covers (catered in point wiring above).

All as per srl item No 167.00 but for Modular socket outlet 2in1, 3 pin 15 Amps flush type

S&F in repair PVC white cover plate with frame 2 Module etc complete all as specified & directed.

S&F in repair PVC white cover plate with frame 3 Module etc complete all as specified & directed.

S&F in repair PVC white cover plate with frame 4 Module etc complete all as specified & directed.

S&F in repair PVC white cover plate with frame 6 Module. etc complete all as specified & directed.

S&F in repair PVC white cover plate with frame 8 Module etc complete all as specified & directed.

S&F in repair modular metal flush box 2 Module etc complete all as specified & directed.

S&F in repair modular metal flush box 3 Module etc complete all as specified & directed.

S&F in repair modular metal flush box 4 Module etc complete all as specified & directed.

S&F in repair modular metal flush box 6 Module. etc complete all as specified & directed.

S&F in repair modular metal flush box 8 Module etc complete all as specified & directed.

S & F in repair modular fan regulator, 120W-2 Module complete all as specified and directed by Engr in charge.

Supply and fix in repair ceiling rose surface bakelite two to three terminals/plate, polycarbonate, isolated body.

Supply and fixing 2nd class hard wood rectangular block open recessed of size 45cmx30cmx5cm depth with 3mm thick phenolic laminated sheet top cover fixed with suitable steel screws & PVC rawl plug (4 Nos),for DB complete all as specified & directed.

Supply and fixing 2nd class hard wood rectangular block open recessed of size 30cmx25cmx5cm depth with 3mm thick phenolic laminated sheet top cover fixed with suitable steel screws & PVC rawl plug (4 Nos), for DB complete all as specified & directed.

Supply and fixing in repair lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified. Make- Havells,Philips,Bajaj

Supply and fixing in repair decorative ultra slim,elegant and sleek designed LED T5 batten lighting fixture with extruded aluminium housing with frosted diffuser environment friendly energy efficient sutiable for 20 watt LED tube light with 125 lumen per watt complete all as specified and directed .

supply and fix in repair LED batten (1.2m) made of CRCA sheet housing with a PC glossy diffiuser duly prewired connection having nominal system lumen output of 2000 lumens at a minimum system efficiency of 115 lumen per watt and total power consumption not more than 20 watt including driver .it has a rated system life time of 40000 burning hours at L70 and should have a temperature of 6500 k CRI>80, THD<10 and PF>0.95 complete all as specified and directed Make-Philips Cat Part No. BN308C LED20S-6500 L120 PSU WH, Crompton Cat Part CIS-305-40-57-SL-DP-NWH, Havells Cat Part STOUTPLUS600BS20WLED840SPCWH

Removing and refixing decorative ultra slim liner LED lighting fixture with extended poly carbonate environmental friendly, energy efficient suitable for 16W to 20W with LED tube of model E-LITE LED pride and connecting up, complete all as specified and directed.

Supply and fixing in repair surface LED luminaries 1x20 watt , 230 volts , 50Hz and new E-LITE LED TRIYCA batten a color changing LED batten and should have a minimum tempereture 6500K all in one fixtures, aal as specified and directed by Engr-in-Charge. Make- Havells,Philips,Bajaj

S&F in repair LED type security-DRACO SERIES light luminaire 20 watt 230 V 50 Hz including all necessary fitting accessories and LED complete all as directed by Engr-In-Charge MAKE- Havells,Philips,Bajaj

S&F in repair 3 Watt metal and synthetic LED bedside flexible light warm white with diamension 5.5cm x 5.5cm x 14.6cm with one year manufacturer warranty. Make : Philips Cat Part No 48042 Havells and Bajaj

S&F in repair 20 Watt motion sensor batten (aluminium housing) for corridors based on auto dimming/ brightness option by motion sensor via in buildt sensor for efficient use of energy. Make : Havells Cat Part No LUNILINESMART20W LED865PCWH or Philips /Bajaj

S&F in repair inverter LED batten 20 Watt (PC body) with opal diffuser, IP-20 and inbuilt battery backup with powerful lithium battery. LED batten shall have atleast four hours backup with minimum two years warranty. The batten shall have deep discharge protection, fast charging, offering cool day light for atleast four hours in off hours. Make : Philips / Havells / Bajaj

S&F in repair 10 Watt emergency LED inverter bulb B-22 capacity with inbuilt powerful lithium battery backup of atleast 4 hours and having minimum two years warranty. The lighting shall have deep discharge protection, fast charging, offering cool day light for atleast four hours in off hours. Make : Philips /Havells /Bajaj

S&F in repair 20 Watt emergency LED inverter bulb B-22 capacity with inbuilt powerful lithium battery backup of atleast 4 hours and having minimum two years warranty. The lighting shall have deep discharge protection, fast charging, offering cool day light for atleast four hours in off hours. Make- Havells, Philips, Bajaj

Supply & fixing in repair indoor decorative ultra slim surface /Wall mounted T5 LED batten tube light complete fitting 1X9 watt LED Tube fitting (size within 600x25x40 mm) suitable for mirror light with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- related colour temperature (CCT) of 6500K,>100Lm/Watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Enginee-in-Charge. Make- Havells,Philips,Bajaj

Supply & fix in repair surface mounted bulk head LED light fitting including 10 watt LED lamp B22 base complete with all accessories and connection complete all as specified and as directed. Make- Havells,Philips,Bajaj

Supply and fixing in repair LED light fitting as building security lights of 35 Watt Cap 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, with epoxy powder coated CRCA sheet steel grey tray, clear acrylic cover, incl street light bracket made out of 25 mm dia GI medium grade pipe 0.6 mtr long complete with 2 sets of FI clamps made out of 30x5 MS flat & nuts, bolts & washer including painting to clamp with two coats of aluminium silver paint over a coat of primer, with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engr-In-Charge

Supply and fix in repair sheet metal enclosure DB single pole and neutral for 240 volts 8 way with 200 Amps rated busbar flush/surface mounting double door.

Supply and fixing in repair 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 6-32 Amp poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engr-In-Charge

All as per srl item No 198.00 but for SPN 40-63 Amp

Supply and fix in repair Vertical DB 4 way suitable for Double Pole outgoing MCB-40 Amp-04 Nos with incoming 100 Amps MCCB 4 pole-01 Nos complete with 250 Amps rated Copper busbar flush mounting, double door, proction class IP-30, IK08 complete all as specified.

Supply and fixing in repair MCB 10 to 32 Amps, single pole & neutral, 240 Volts.MAKE- havels,philips,bajaj

Supply and fixing in repair MCB 63 Amps, triple pole & neutral, 415 volts.MAKE- havels,philips,bajaj

Supply and fix in repair MCCB 100 Amps, 4 pole, 16 KA thermal and magnetic release in V TPN DB complete all as specified.

Supply and fixing in repair PVC Blanking Plates one way with internal lock complete.

Material & Labour for Sub Main Wiring in repair with two run single core 4 Sqmm PVC insulated unsheathed (FRLS) cable with stranded copper conductor drawn in PVC conduit & accessories Suitable size with and including 2.5 Sqmm copper green colour earth wire all as specified and directed by Engr-in-Charge. NOTE-two run of 4 sq.mm & One run of 2.5 sq.mm & One run of PVC conduit with accessories shall be measured as One length.

Material & Labour for Sub Main Wiring in repair with two run single core 6 Sqmm PVC insulated unsheathed (FRLS) cable with stranded copper conductor drawn in PVC conduit & accessories Suitable size with and including 4 Sqmm copper green colour earth wire all as specified and directed by Engr-in-Charge. NOTE-two run of 6 sq.mm & One run of 4 sq.mm & One run of PVC conduit with accessories shall be measured as One length.

Supply and fixing in repair 1100 volts grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC tape and overll PVC sheathed weather proof service connections one twin core cable flat or circular of aluminium, conductors size 10 Sqmm, stranded conductors.

Identifying and rectifying the defects pertaining to internal electrification of any type and nature such as taking down defective switch/socket/ceiling rose/holders/fittings / fixtures any type, rectification of faulty electric circuits, tightening of loose connections, replacment of old u/s wiring/conduits/casing caping & connections etc, complete all as specified and directed.

Identifying/detecting defects in unserviceable wiring and rectifying the defects pertaining to internal electrification of any type and nature such as taking down defective MCBs SP /SPN/DPs/TPN any type, rectification of faulty due to loose connection in electric circuits, tightening of loose connections, replacement of U/S MCBs, U/S portion of conductor etc, complete all as specified and directed. NOTE FOR ITEM NO 208.00 to 209.00 :- (a) All T & P/Stationeries and labour team required comprising of twoNos of trained electricians & helpers will be provided by the contractor daily, as directed. (b) Rep of the contractor will present in complaint cell & responsible for receiving & attending the complaints from 0900 Hrs to 1700 Hrs at the time of lodging the complaint. In absence of rep of Contractor penal recovery as decided by GE shall be imposed & on contractor. (c) Cost of minor stores such as screws,clamps,insulation tapes,nuts/bolts, nail of required size etc shall be deemed included in the above quoted rate. However, major items such as switches, sockets, bell push, fan regulator, air conditioning condensers and sensors etc shall be measured and paid separately under appropriate items of Schedule 'A'. (d) Complaints where complete replacement of circuit/point wiring required shall be measured under relevent item. (e) If contractor fails to rectify the complaint with in 24 hours after receiving, Rs 500/- per complaint will be penalised.

M & L for Earthing in repair complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick burried directly in ground earth pit not less than 2.25 Mtr deep below normal ground level with top edge of earth plate not less than 1.5 Mtr below normal ground level, connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, checknuts and washers of galvanised iron all as shown in electrical plate No 5 of SSR Part-I, connected to transformer / feeder pillar all as specified including GI pipe 20 mm bore medium grade for watering and 15 mm GI Pipe light grade for protection of earth lead wire, PCC chamber using PCC 1:3:6 type C-2 CI frame and cover, funnel and wiremesh, all excavation and earth work etc complete all as specified and directed by Engr-in-Charge

Material and labour for renewal of Earthing complete with GI earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit should not less than 4 mtr deep below normal ground level ) with top edge of the plate not less than 2.95 mtr deep below normal ground connected to and included earth lead wire of dia 4 mm by means of bolts nuts check nuts and washer returning and filling the pits with excaviated vsoil mixing with charcoal 250 kg, crystal salt 200 kg ,magnisiun sulphate of 100 kg and vegitable soil all around the plate up to 350 mm above from top edge of plate and balence portion filling with excaviated soil in layers not exc 25 mm thick 25 mm bore galvanised iron medium grade watering pipe up to top of plate 50mm bore galvanised iron light grade pipe for earth strip protection including all excavation earth work in any type of soil pcc 1;3;6 type c1 ....for chamber of internal size 300mmx 300mmx300mm with 120mm thick wall and 700mmx700mmx150mm thick bed concreat RCC 1:2:4 ,type b1 for precast chamber cover 50mm thick reinforced with welded steel wire fabric orxPM jali (weight not less than 4.00 kg/sqmm) ,funnel,with wire mesh complete all as specied and directed. Note (i) Quoted rate shall be deemed to include for earth strip with protection pipe up to 7.5 M length

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric poer cable (heavy duty) 1100 conductor of size 25 Sq mm 4.0 Core complete all as specified and as directed by Engr-In-Charge.

Excavation in trenches not exc 1.5 m wide and n. exc 1.5 m deep in soft/loose soil for foundation/ cable etc n exc 10 Sqm on plan and n exc 1.5 Sqm in depth all as specified and directed by Engr-in-Charge

Returning, filling in including spreading levelling, watering and well ramming in layer n. exc 25 cm thick complete all as specified and directed

Removing surplus soil to a distance n. exc 50 m and depositing where directed at level n. exc 1.5 m above the starting point complete all as specified and directed

Supply and spreading, levelling river sand in trenches for cables cushioning on top and bottom of cable all as specifede and directed.

M&L brick protection with sub class'B' brick laid flat across the cable complete all as specified and directed

M&L for boring under roads for crossing of UG Cables complete all as specifie and directed by Engr-In-Charge.

Supply and fix GI Pipe light grade of size 40 mm laid in trenches under road/fixed on wall/pole for cable protection complete all as specified and directed by Engr-In-Charge

GAR CONSTRUCTIONS (BID ID -3418577)

shiva construction (BID ID -3419505)