COMPREHENSIVE MAINTEMANCE WORK OF 3 EME CENTRE 1 TO 4 TB ENGR REGT FD WKSP FD HOSPITAL HRDC ASC DSCC 1010 TPT AND OTHER MINOR UNITS AT BAIRAGARH AREA UNDER GE BHOPAL

Amount

Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline

Hacking out old broken glass of any thickness and size from steel/wooden frame complete all as specified and directed.

S&F of 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 sqm in each panels complete all as specified and directed.

S&F of 3 mm thick figured glass, pin head type and glazing with oil putty in squares not exc 0.50 sqm in pane complete all as specified and directed.

S&F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Demolition of cement concrete in ground floor, (unreinforced) paving nexc 15 cm thick (below or above ground level) including tiling if any complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) in plinth protection, aprons, hard standing, path and like including finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling, subbase and mass concrete complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4, type B-1 (using 12.5 mm graded stone aggregate) as in floors to receive floor finishes complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for granite stone (any type) 18 to 20 mm thick work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, counter, shelves and like in cement mortar (1:4) including pointing in white cement (1:2) by using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20 mm thick over and including 15mm thick screed bed in CM 1:6 etc set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20 mm thick over as in skirting over and including 10 mm thick rendering in CM 1:4 set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed.

M&L for light shade vitrified ceramic tiles 8-10 mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. over and including 20mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

M&L for light shade vitrified ceramic tiles 8-10 mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in verticle surfaces like skirting/dado etc. over and including 10mm thick bedding layer in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

M&L for dark double charged vitrified ceramic tiles 8-10 mm thick (square/rectangular) polished, area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. over and including 20mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in epoxy adhisive complete all as specified and directed.

M&L for dark double charged vitrified ceramic tiles 8-10 mm thick (square/rectangular) polished, area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in dado/skirting etc. over and including 10mm thick bedding layer in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

M&L for coloured glazed ceramic tiles of size 450x300x7mm thick in vertical surface such as dados and similar work, over and including 10 mm thick rendering even and rough in CM 1:4 for backing of tiles, set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified & directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm, but not exceeding 0.18 Sqm on vertical surfaces such as skirting, dado and risers to steps etc over and including 10 mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for heavy duty endura tiles 10mm thick in floors over and including 15mm thick screed bed in CM 1:4 as in floors etc; set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified and directed.

M&L for hardcore of broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for clean dry sand cushioning for laying of interlocking paver block complete all as specified and directed.

M&L for machine pressed precast conctete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, with grey cement and pigments glossy finished complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Demolition of brick work, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for brick work with fly ash bricks (modular size bricks), straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.

M&L for brick work with fly ash bricks (modular size bricks) straight or curved on plan of any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on brick/concrete surfaces including finishing the surfaces fair and even without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on brick/concrete surfaces including finishing the surfaces fair and even without using extra cement complete all as specified and directed.

M&L for 10mm thick rendering in CM 1:4 on concrete surfaces as in ceiling including finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces of walls and applying one coats of oil bound distemper over a coat of wall primer complete all as specified and as directed.

M&L for preparation of newly plastered or unplastered surfaces of walls and applying two one of exterior water base emulsion paint on walls over a coat of wall primer complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces of ceilings and applying one coats of oil bound distemper over a coat of wall primer complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed.

M&L for complete removal of existing treatment on wall surfaces and applying one coats oil bound distemper over a coat of wall primer complete all as specified and directed.

M&L for complete removal of existing treatment on wall surfaces and preparing wall surfaces and applying two coats of heritage/texture finish of approved design/colour over a coat of wall primer complete all as specified and directed. Note: (i) Each stage i.e., preparation of surfaces, application of primer, application of first coat of texture, application of 2nd coat of texture will be got passed. (ii) Berger/Asian or equivalent as approved by GE.

M&L for applying 2mm thick coat of white cement based wall care putty on walls complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets, waste coupling and connecting pipe overall size 915 x 460mm bowl size 410 x 330 x 160mm complete all as specified and directed.

S&F in repairs sink made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, waste coupling and connecting pipe, over all size 495 x 420 mm with bowl size 410 x 330 x 160 mm complete all as specified and directed.

S&F in repairs PVC low level flushing cistern 10 ltrs capacity with all internal fittings including 32mm dia flush pipe and fixing to supply pipe including PVC connection 600 mm long 15 mm bore with brass heads and washers with connections complete all as specified and directed.

S&F in repairs 15 mm bore stop cock (angle valve), cast copper alloy, fancy type, chromium plated, screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs 15 mm bore stop cock two way (angle valve), cast copper alloy, fancy type, chromium plated with screwed down, high pressure, screwed for iron pipe or union and fixed complete all as specified and directed.

S&F in repairs 15 mm bore bib taps, fancy type cast copper alloy, chromium plated, screwed down, screwed for iron pipe or brass ferulle and fixed complete all as specified and directed.

S&F in repairs 15 mm bore bib taps, standard of PTMT any colour screwed, for iron pipe and fixed (minimum weight 90gms) complete all as specified and directed.

S&F in repairs brass chromium plated shower rose 125 mm in size with or without swivel joints of any size including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs vitreous china wash basin, white, oval type, size 520mm x 450mm including CP waste coupling, 32mm dia PVC waste pipe of suitable length, brackets and cutting for pinning in ends of brackets complete all as specified and directed.

S&F in repairs vitreous china wash basin, white flat back size 550 x 400mm including CP waste coupling, PVC waste pipe and brackets fixing in position complete all as specified and directed.

S&F in repairs 15 mm pillar taps, cast copper alloy, fancy type, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F for repairs CP Jet spray with holder on EWC with flexible pipe complete all as specified and directed.

S&F in repairs health faucets with holder CP with 1.2 mtr long flexible pipe complete all as specified and directed.

Taking up or down 20 mm bore GI steel tubing and connections complete all as specified and directed.

S&F of 20mm GI tubing medium grade with all necessary fittings and fixed to wall and ceiling or laid in floors complete all as specified and directed.

Taking up or down 15 mm bore GI steel tubing and connections complete all as specified and directed.

S&F of 15 mm GI tubing medium grade with all necessary fittings and fixed to wall and ceiling or laid in floors complete all as specified and directed.

S&F in repairs vitreous china wash down water closed pan (pedestal Pattern), white (excluding fixing bolts, flushing cistern and flush pipe) and including white plastic seat cover complete all as specified and directed.

S&F in repairs 32mm bore PVC waste pipe for wash basin complete all as specified and directed.

S&F in repairs vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe) but including urinal spreader, waste coupling and waste pipe complete all as specified and directed.

S&F in repairs vitreous china bowl urinal flat back, size of 465 x 355 x 265mm (min) with grating and union for discharge pipe (excluding flushing cistern and flush pipe) but including waste coupling and waste pipe complete all as specified and directed.

S&F in repairs vitreous china squatting pan "Orissa" pattern size 580 x 440 mm, white with integral foot rest (exculding flushing cistern and flush pipe) with and including cement concrete bedding complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches, floors or fixed in walls complete all as specified and directed.

S&F in repairs 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches, floors or fixed in walls complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F in repair PVC (SWR) bends any radius 110 mm dia complete all as specified and directed.

S&F in repair PVC (SWR) bends any radius 75 mm dia complete all as specified and directed.

S&F in repairs 75mm dia PVC (SWR) floor/Nahani trap with grating including jointing with solvent cement complete all as specified and directed.

Dismantling of timber scantling in fillets, rails, posts, rafters, purlins etc under 40 sqcm in section in any position for unframed work complete all as specified and directed.

Dismantling mild steel work of any description not other wise provided for complete all as specified and directed.

S&F of mild steel angle iron and rolled section as in main and cross beams hip, jack rafters, hollow section purlins, posts, where connected to common rafters and running rails and guides for sliddinng doors fixed with angle cleats or other connecting plates complete all as specified and directed.

Dismantling of wall and ceiling hard boards/AC sheets and plywood in any thickness and position including cover fillets complete all as specified and directed.

M&L for false ceiling comprising with and including 12mm thick recessed edge gypsum board [Boral plaster board ] (Make:Boral of Gypsum India Ltd. or equivalent as approved by GE) screwed on GI Metal framework consisting of following:- (i) Perimeter channel of GI sheet 0.50 thick of girth not less than 75mm fixed on walls with steel screw and PVC rawl plugs of size 35mm long @ 450mm c/c. (ii) Secondry section (cross runner) of GI sheet knurled wedge 0.50mm thick girth not less than 103.50mm fixed to main runner @ 600mm c/c with the help of GI wire connecting clips of 2 to 3mm diameter. (iii) The primery section channel (main runner) of GI sheet 0.75mm thick and girth not less than 75mm @ 1200mm c/c suspended by GI sheet angle fixed to MS ceiling cleat with 0.50mm dia and 18mm long MS nut bolt. (iv) MS ceiling cleats fixed to truss, purlins, rafter etc. (v) Providind and fixing 10 to 12mm Gypsum board in different levels as ordered by GE. Joints of Boards shall be finished and sealed with jointing compound and paper tape (Make: Boral or equivalent) complete all as specified and directed.

M&L for galvanised cold rolled steel section frame work size 600x600mm grid size 24x38x0.30 mm Tee (bottom pre-coated) and 24x24x0.30 mm thick wall angle, galvanised cold rolled steel section including suspenders as per (Gabsec) manufacturs instruction as in ceiling complete all as specified and directed. Make: Gabsec or equivalent as approved by the GE

M&L for mineral fibre bound decorative type calcium silicate board of size 595 x 595 x 4mm thick fixed to steel frame work as in ceiling with and including applying two coats of oil bound distemper complete all as specified and directed.

Dismantling asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and directed.

S&F of pre-painted galvalume aluminum zinc coating GI Based corrugated steel sheeting 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, chajjas, fixed with self tapping screws complete all as specified and directed.

S&F of Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of a colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for mild steel framed work such as grills, gratings, gate etc with ends of bars & plates souldered and/or riveted or forged into spikes, framed guard bars barred iron dors ladders framed balusters walkways, railing frame work of water tanks and similar work conforming to Fe-410-0 or Fe-310-0 complete all as specified and directed.

M&L for welding n.exc 2.5cm in length thickness of metal to be welded n exc 6mm thick complete all as specified and directed.

M&L for welding exc 2.5cm and n.exc 5cm in length and thickness of metal to be welded n exc 6mm thick complete all as specified and directed.

Taking down chowkhats or frame nexc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkhats or frame exc 1.5 sqm but nexc 4.00 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down shutters of any description exc 1.0 sqm and n.exc 2.0 sqm each complete all as specified and directed.

S&F of steel ventilator with top hung shutters including hinges with fixed type MS handles peg stay and tower bolt but with additional sash bars MS flats for fixing of wire gauge complete all as specified and directed.

S&F of solid PVC door frame of size 50 x 47mm made out of 5mm plain colour PVC sheet reiforced with MS square tube and fixing in opening as per manufacturer instructions complete all as specified and directed.

S&F of 105x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete as specified made out of 1.25mm thick MS sheet complete all as specified and directed.

S&F of 125x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc made out of 1.25mm thick MS sheet complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-0 (using 12.5mm graded stone aggregate) as in filling of door frames of pressed steel and in bed blocks etc complete all as specified and directed.

S&F of factory made solid PVC moulded door shutter with solid particle board core, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick wall nut colour moulded PVC sheet on the front face and 2mm thick plain colour PVC sheet on back face, fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F of 30mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and both faces is covered with approved pattern decorative coloured laminate type 1 of 0.9mm thick and all around side faces is covered with decorative hard wood lipping complete all as specified and directed.

S&F of 30mm thick second class hard wood glazed and skelton door shutter open rebated and prepared to receive glass or gauge etc divided into square with plain chamfered or rounded, mitred and rebated sash bars any number complete all as specified and as directed. Note: - Size of member of shutters as specified in SSR Part-I 1991 section 8 clause 8.24 (a).

S&F of galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed and with tinned tacks complete all as specified and directed.

S&F of 100mm aluminium handles, D type with bone plate, anodised and fixed complete all as specified and directed.

S&F of 100mm aluminium anodised barrel tower bolts extruded section and fixed complete all as specified and directed.

S&F of 75 mm mild steel butt hinges medium weight, cold rolled and fixed to frame complete all as specified and directed.

S&F of 150mm aluminium handles, cast type, anodised and fixed complete all as specified and directed.

S&F of 150 mm aluminium anodised barrel tower bolts extruded section and fixed complete all as specified and directed.

S&F of 250mm long aluminium alloy anodised sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast sections or cast aluminium alloy complete all as specified and directed.

S&F of 100 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised type B-21 and fixed complete all as specified and directed.

M&L for floor door stopper 150mm long of aluminium alloy body and tonge, anodised, with hard drawn steel spring and fixed complete all as specified and directed.

Taking down aluminium doors upto 4 sqm each and re-fixing in same position after carry out necessary repairs including replacing rubber beading and jointing cleats, tightening if required including making good existing surfaces complete all as specified and directed.

M&L for powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

M&L for powder coated (minimum thickness of powder coating 50 micron) aluminium sliding window (three track) with aluminium section weighing 0.55 kg/m including joining cleats, glazing clips, rubber neoprene packing, necessary powder coated hardware of suitable size ie. handles, barrel tower bolts, hinges etc, powder coated aluminum snap beading, screws etc. complete all as specified and directed. Note : Panel filling ie. glass, wire mesh etc. shall be measured and paid separately.

M&L for powder coated (minimum thickness of powder coating 50 mm micron) aluminium door shutters of aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, powder coated aluminium handles 150mm size-2 Nos, 3-Nos powder coated aluminium hinges heavy duty and 02-Nos 150mm long powder coated aluminium tower bolts in each door shutter with powder coated aluminum snap beading, screws etc. complete all as specified and directed. Note : Panel filling ie. glass, fibre sheet, board etc. shall be measure and paid separately.

S&F of factory made single extruded WPC (wood polymer composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed. Note: Butt hinges shall be measured and paid separately.

S&F of factory made single extruded WPC (wood polymer composite) solid door/ window/ Ceosetory windows and other frames/ chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed.

M&L in replacement 18/19mm thick plywood with 1 mm laminated misc one side decorative and other side white laminated with 90 degree hinges soft close board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws/nails to timber frame work Including class hard wood, plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads area exc 13 sq cm and not exc 25 sqcm complete all as specified and directed.

Dismantling water tank capacity exc 500 ltrs but nexc 1000 ltrs complete all as specified and directed.

S&F of 1000 Ltrs rotational moulded polyethylene water stotage tanks (cylinderical verticle with closed top) triple layer hoisted and fixed in position complete all as specified and directed.

S&F of door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and aluminium extruded section body complete all as specified and directed.

S&F of mild steel bands, hold fasts, wind ties and similar articles conforming to Fe 290 Gde -E-165 complete all as specified and directed.

M&L for preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L for preparation of new or previously untreated steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for preparation of old or previously treated surfaces wood/wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F in galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperure 1.18 mm and fixed and with tinned tacks complete all as specified and directed.

M&L for preparation of old or previously treated surfaces of steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat synthetic enamel paint complete all as specified and directed.

S&F of polycarbonate switch piano, flush button, single pole, one way 5Amp, 240 V, ISI marked complete all as specified and directed.

S&F of polycarbonate switch piano, flush button, single pole, two way, 5 Amp, 240 V, ISI marked complete all as specified and directed.

S&F of polycarbonate ceiling rose, surface type, 3 terminal, 240 V, ISI marked complete all as specified and directed.

S&F of polycarbonate socket outlet 2-in-1, 5 pin 5 Amps, 240 volts, flush type complete all as specified and directed.

S&F of polycarbonate switch socket combo outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 230 volts complete all as specified and directed.

S&F of polycarbonate switch piano flush button single pole one way 15 Amp 240 volt ISI marked complete all as specified and directed.

S&F of polycarbonate socket piano flush button single pole one way 15 Amp 240 volt ISI marked complete all as specified and directed.

S&F of stepped type electronic fan regulator, delux model, 100 watt, 240 V, flush type complete all as specified and directed.

S&F in repairs lamp holder, PVC/Poly carbonate type with back plate suitable for batten fittings with and including 9 watt LED lamp and and making necessary connections complete all as specified and directed.

S&F of buzzer, ding dong AC 230 volts, single pole complete all as specified and directed.

S&F bell push, flush type, SP, 5 Amp, 240 V complete all as specified and directed.

S&F in repairs MCCB TPN 100 Amps, 10 KA breaking capacity 'C' curve including making connection with suitable size aluminium/ copper lugs complete all as specified and directed.

S&F in repairs MCCB TPN 63 Amps, 10 KA breaking capacity 'C' curve including making connection with suitable size aluminium/ copper lugs complete all as specified and directed.

S&F of MCB SP 5 to 32 Amps, 240 volts 10 KA breaking capacity 'C' curve including making connection with suitable size aluminium/ copper lugs complete all as specified and directed.

S&F of MCB SPN 5 to 32 Amps 240 Volts 10 KA breaking capacity 'C' curve including making connection with suitable size aluminium/ copper lugs complete all as specified and directed.

S&F of MCB TPN 40 to 63 Amps, 240 Volts 10 KA breaking capacity 'C' curve including making connection with suitable size aluminium/ copper lugs complete all as specified and directed.

S&F in repairs LED tube light box type highly durable surface mounted LED batten constructed of fire retardant engineering grade extruded plastic and decorative end caps, 18/20/22/25 Watt (reterofit type, T8 pattern, single side connection) 240 V, PF > 0.90, colour Temp 6500 K, System Luminious efficacy > 100Lm/W, approx length 4 feet to be fixed in existing or new batten with and including making necessary connections suitable for tube light fitting complete all as specified and directed. Make :- Bajaj / Havells/ Philips or as approved by GE.

S&F in repairs surface mounted economical LED panel light 1 ft x 1 ft, 18/20 watt with high quality diffuser for uniform light, CRCA housing, separate replaceable electronic driver, suitable for recess and surface, CRCA panel 18/20 ECW including LED lamp, nuts, wire and all connected accessories complete all as specified and directed. Make: Bajaj/ Havells/ Philips or as approved by GE.

S&F of panel light, square type 2 ft x 2 ft of 40/36W, CRCA housing color temperature 3500 - 4100 K, AC 220 -240 V, 50 Hz, high surge protection 2.5 KV, ISI marked, Lumen>4000, working life time hour 50000 pc lens for better light distribution including nut, led lamp, suitable for recess and surface wire all connecting accessories complete all as specified and directed. Make: Bajaj/ Havells/ Philips or as approved by GE.

S&F in repairs LED 9/10 Watt mirror tube light fitting intergated type, approx 2 feet, 240 V, PF>0.90, colour Temp 6500 K, suitable for surface mounting on wall including connecting with PVC insulated multistranded copper flexible cable 0.5 Sqmm two core and PVC round block white colour x 2 Nos for mounting of fitting complete all as specified and directed. Make: Bajaj/ Havells/ Philips or as approved by GE.

Taking down unserviceable service cable any type and size and Supplying, laying and fixing or passing through pipe, 1100 volt grade heavy duty cable with PVC insulated multi stranded alunimium conductor served with an inner sheathed of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed 16 Sqmm x 4 core nominal cross section in service connections complete all as specified and directed.

Taking down unserviceable service cable any type and size and Supplying, laying and fixing or passing through pipe, 1100 volt grade heavy duty cable with PVC insulated multi stranded alunimium conductor served with an inner sheathed of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed 25 Sqmm x 4 core nominal cross section in service connections complete all as specified and directed.

S&F in repairs building secutity light 22 Watt with and including 32mm bore GI pipe light grade of approx 1m length including weather protection cover nut IP 54, bolt and connected accessories complete all as specified and directed. Make: Bajaj/ Havells/ Philips or as approved by GE.

S&F of 9 Watt LED bulb, 220 volt, 50 Hz complete all as specified and directed. Make: Bajaj/ Havells/ Philips or as approved by GE.

S&F of cable 1 Sqmm x 3 core multi stranded copper flexible wire FRLS 220 volt, 50 Hz complete all as specified and directed.

S&F of quarter pin for fans complete all as specified and directed.

S&F in repairs 3 pin plug top AC-230 Volts 15 Amp complete all as specified and directed.

S&F in repairs laminated hylum sheet cover, ISI marked of Make" Hylem" including cutting grooves for mounting of fittings like switches, sockets, fan regulators etc; including fixing in location with new galvanised screws and cup washer complete all as specified and directed of following sizes:-

11 x 13 inches

9 x 11 inches

5 x 8 inches

5 x 5 inches

S&F in repairs condenser 2.5 mfd complete all as specified and directed. Make: Epcos/Tibcon

S&F in repairs condenser 4 mfd complete all as specified and directed. Make: Epcos/Tibcon

Deduct Schedule of credit (calculation will be done off line) Rs. 69335.00

M/s VIKAS TRADERS

PADAMSHRI CONSTRUCTION CO

R K Sales

RAJPATI CONSTRUCTION