MODERNISATION OF BLDG NO. P-168(A) COOK HOUSE AND DINNING HALL WING V ARTY DEPOT REGT AND PROVN OF OPEN URINAL POINT IN THE COMPLEX OF CENTRE PARADE GOUND FOR AGNIVEERS OF ARTY CENTRE UNDER GE NRC.

Amount

Excavating in trenches,n exc 1.5 m wide and n exc 1.5m in depth for foundation etc in soft / loose soil.

Dismantling floor, hearth or wall tiling including cement mortar bedding (But not backing) removing serviceable tiles to store and rubbish off the premises complete all as specifed and directed

M&L for double charged vitrified ceramic tiles any light shade 8 to 9mm thick (square/rectangular) polished, area of each tiles not exc 0.36 Sqm in floors/skirting etc set & jointed in neat cement slurry and painted in white or coloured cement to match.

M&L for coloured non skid ceramic tiles 7mm to 8mm thick area of each tile exc 0.06 sqm but not exceeding 0.11 sqm thick set and jointed in neat cement slurry and pointed in coloured cement to match in floor etc complete all as specifed and directed Note : Cement mortar screed bed layer shall be measured & paid separately

M&L for glazed ceramic tiles coloured size 450 x 300 x 7mm thick as on vertical surfaces, of walls as in skirting, dado etc set and jointed in neat cement slurry & pointed with coloured cement to match complete all as specified and directed

M&L for coloured glazed ceramic tiles 300 x 450/300 x 600 x 6 to 7mm thick in vertical surface, set and jointed in neat cement slurry & pointed with coloured cement to match

M&L for Hardcore of guage n exc 63 mm of broken stone or boulders, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to true surface

M&L for 75 mm thick cement concrete type B-1, 1:4:8 (20 mm graded aggregate) as in sub base

M&L for rendering 10mm thick in CM 1:4 as in backing coat plaster on surfaces of brick masonary or stone masonary surfaces complete all as specifed and directed

Dismantling of stone slabs of any descripation or thickness in floors, aprons etc laid bedded & pointed in any mortar complete all as specifed and directed

S&F Machine cut kota stone slab 16-18mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specifed and directed

S&F Machine cut kota stone slab 16-18mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing as in skirting complete all as specifed and directed

M&L for granite (of any type) work (table rubbed and polished) 20 mm thick in steps,jambs,pillars,cooking platforms and like in cement mortar 1:4 incl pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite

M&L for hand cut cudappa stone slab 16 -18 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete Note: screed bed layer measured seperately complete all as specifed and directed

M&L for Rounding to edges of stone slabs one edge such as in steps cooking platform and other similar work

Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness(Below or above ground level) un-reinforced complete all as specified and directed.

M&L for Screed bed or bedding layer of cement mortar 15 mm thick for laying floors finishes in cement mortar 1:6 complete all as specifed and directed

M&L for Screed bed or bedding layer of cement mortar 20 mm thick for laying floors finishes in cement mortar 1:6 complete all as specifed and directed

M&L for PCC 1:4:8 type D2 (using 40mm graded aggregate as in foundation filling mass concrete complete all as specifed and directed

M&L for GI Tubing 20mm dia 'medium grade', galvanised, with all fitting complete in trenches all as specified and directed.

M&L for GI Tubing 15mm dia 'medium grade', galvanised, with all fitting complete in trenches all as specified and directed.

M&L for cutting/drilling existing pipe line of dia upto 50mm & taking branch connection complete incl all necessary GI fiting, jointing materials, earth work etc.

Taking up or down 20 mm dia tubes galvanized iron and connections and removing/shifting from site incl cleaning for refixing where directed complete all as specifed and directed.

All as per Item No. 23.00 above but size 15 mm dia.

Re-fixing only 20 mm dia tubes galvanized iron and connections fixed to walls or laid in floor supplying & fixing new fittings such as socket, bends, elbows nipple, union etc all as specified and directed of size complete all as specified and directed

All as per Item No. 25.00 above but size 15 mm dia

S&F for 20 mm dia tubes medium grade, galvanized with iron all fittings fixed to walls, ceiling and laid in floor of sizes complete all as specified and directed.

All as per Item No. 27.00 above but size 15 mm dia

S&F in repair PVC Nahani trap with grating including jointing to waste pipe fixed in cement concrete type (1:2:4) B-1 dia of outlet 75mm complete all as specifed and directed

S&F repairs bib taps standared of PTMT 15mm bore dia any colour high presure screwed for iron pipe of Make Prayag fixed and repairs (minimum weight 90 gms) complete all as specified and directed

S&F 125 mm size Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specifed and directed

S&F 15 mm size chromium plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specifed and directed

S&F in repairs 15 mm size chromium plated Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specifed and directed.

Taking down cement plaster on brick or stone wall etc including raking out joints hacking for keys scrubbing down with water etc. all as specified and directed

M&L for rendering 15mm thick in cement mortar(1:6) on Stone masonry surfaces, concrete surfaces or fair faces of brick work and finishing even and smooth including taking down old cement plaster complete all as specifed and directed

M&L for preparation of plastered surfaces of walls by washing, rubbing down,stopping and applying two coat of oil bound distemper over a coat chalk whitening primer prepatory to distemper on walls.

M&L for rendering 15 mm thick cement mortar on stone surfaces, concrete surfaces or other than fair faces of brick work in cm 1:4 finished even and fair without using extra cement using Water Proofing Compound complete all as specifed and directed Note : Water Proofing Compound shall be paid seperately.

M&L for rendering 15 mm thick cement plaster on other than fair faces of brick work or concrete surfaces in CM 1:6 and rendering is to be finished even and smooth without using extra cement adding water proofing compounder 3% by weight of cement (water proofing compound shall be measured and paid separately)

M&L for Preparation of newly plastered surfaces of any description and applying two coats of exterior acrylic weather coat emulsion paint on walls over a coat of water based primer complete all as specified and directed

M&L for rendering 05 mm thick (1:3) on fair faces of concrete surfaces incl preparation to new surfaces on ceilings finished even and smooth without using extra cement

M&L for three coat of white wash including preparation of new surfaces on ceilings

Demolition of brick work/stone work built in cement mortar. including coping but except ashlar facing dressed stone work to precast concrete article complete all as specified and directed

M&L for Brick works with fly ash bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specifed and directed

M&L for brick work withfly ash bricks straight or curved on plan to any radius in half brick thick wall built in CM (1:4) complete all as specifed and directed

Disconnecting existing tanks of exc 500 ltrs but n exc 1000ltrs setting aside(or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and refixing in position (cleaning, repairing etc measured seperatly)

Dismantling water tanks of capacity Exc 500 Ltrs but n. exc 1000Ltrs and removing to from site or to store complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks double layer (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 ltr.

S&F Ball brass valves, high pressure, with polythene float and flynut for 20mm bore dia pipe complete,screwed for iron pipe or brass ferrule and fixed

S&F for 25 mm Gun metal,globe or gate valves,with iron wheel head,screwed both ends for iron pipe and fixed

Supply and fix Gun metal Globe or Gate valve with iron wheel head, screwed both ends for iron pipe and fixed with required necessary GI fittings complete of size dia 20 mm

Supply and fix Gun metal Globe or Gate valve with iron wheel head, screwed both ends for iron pipe and fixed with required necessary GI fittings complete of size dia 15 mm

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed

S&F PVC (SWR) pipe single socketed of 110mm with rubber ring joints fixed to wall complete all as specified & directed bore of pipe in mm complete all as specifed and directed

All as per Item No. 53.00 above but size 75mm

S&F of PVC(SWR) bends of 75 mm dia.

All as per Item No. 55.00 above but size 110 mm dia

S&F of PVC(SWR) branch piece,single(single Y) 110 mm dia equal or unequal

S&F of PVC(SWR) vent cowl of 75mm bore.

S&F of PVC(SWR) vent cowl of 110mm bore.

S&F 110mm bore PVC (SWR) junction single-Tee (equal or unequal) with access door complete all as specified and as directed.

S&F in repair grating doom PTMT of 100mm dia complete all as specifed and directed

S&F in repairs Vitreous china squatting pan with PVC(SWR) 'P' trap of 125/110 mm bore,'Orissa' pattern, size 580x440 mm white,with integral foot rests (excluding flushing cistern and flush pipe)

S&F in repairs PVC valveless,symphonic action type,flushing cistern ,low level white,with inlet,ball valve,float and handle including brackets of 10 ltrs with 32mm dia flush pipe complete all as specified and directed.

S&F Vitreous china bowl urinal flat back ,size of 760x370x320 mm white (minimum),with grating and union for discharge pipe (excluding flushing cistern,flush pipe and waste pipe)

S&F vitreous chaina wash basin, flat black white, size 550 X 400mm including cutting for and pinning in for bracket and 32mm dia CP waste coupling, 32mm dia PVC waste pipe and connection to drain pipe complete all as specified and as directed.

S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm

S&F for Low density polyethylene pipes of Bore 32 mm of pressure rating 6 kgf/cm2 fixed complete to walls ,ceilings or in floors

S&F waste coupling of 40 mm bore (half or full threaded) suitable for urinals

S&F PVC connections 15mm size with PTMT nuts of length 300mm.

S&F chromium plated 15mm Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, complete all as specified and directed

S&F 15mm Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.

S&F 15mm dia Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms complete all as specified and directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frame not exc. 1.5 Sqm each & removing from site.

Taking down chowkat or frames with shutters (without taking off shutters from the frame exc. 1.5 but n exc 4.00 Sqm each &removing from site.

Taking down shutters exc 1.00 Sqm but n exc 2.00 Sqm.

Taking down shutters but n exc 1.00 Sqm

S&F "RAJSHRI" Brand factory made 100% Solid WPC ( Wood Polymer Composite ) - Door Frame 63mm x 51 mm ( Moulded ) Single Rebated, made from Wood Polymer Composite ( Single Extruded Process ) material comprising of virgin PVC polymer of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and Natural Fibers ( Wood Powder/ Rice Husk/ Wheat Husk ) and Non toxic additives fabricated with meter Joints after applying PVC solvent Cement & screwed with full body treaded star headed screws having minimum frame density of 780 kg/ cbm & manufactured by "RAJSHRI" an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of ( Min.990 N ), Minimum Compressive Strength of 58 N/mm2, Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof , water / Moisture Proof & Fire retardant & Fixed in position with SS Dash Fasteners / Hold Fast of required dia and lenght, all as per specifications drawings as directed by the Engineer-In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company.

S&F “RAJSHRI” Brand Factory Made 25mm thick 100% Solid WPC ( Wood polymer Composite ) Solid Plain Flush Door Shutter of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm manufactured by "RAJSHRI" an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N (Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company.

S&F in repair Sheet glass ordinary quility 3 mm thick nexc 0.5sqm each pane and glazing with oil putty incl hacking out old broken glass if any (any thickness, size and description) from metal frame including punching or drilling out old glazing pins/springs clips and providing and fixing new ones. complete all as specifed and directed

Taking down carefully existing bitumen tarfelt incl. Screed and cleaning of surfaces of roof etc. With wire brush incl. Flashing and junctions of parapets/kerb walls etc. And removing of the rubbish to a distance exc. 500 metres but not exc. 1.5 km and deposting where directed.

M&L for Providing, cement concrete type B1 1:2:4 (20 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges or sub base

M&L for 10mm thick plastering (screeding) in cement mortar 1:3 on concrete roof surfaces finished even and smooth without using extra cement and using Water Proofing Compound @ 3%. Note : Water Proofing Compound shall be paid seperately.

Supply only intergral water proofing compound

Supply of liquid water proofing compound

M&L for Waterproofing on roof including flashing and junction of parapet, kerb, wall etc. As under (a) Applying oil based bituminous primer on cleaned and dried surface @ 0.2 kg/sqm. (b) Laying by thermo fusion ( torch applied) 3 mm thick APP based polymeric water proofing membrane weighing not less than 3.5kg/sqm and reinforcement with polyester non woven fabric ( not less than 150 gms/sqm) (c) Painting the exposed APP membrane surface with bituminous aluminium paint @ 0.15kg/sqm (Note: ser no. (a), (b) & (c) shall be of same approved make)

Repairing broken edges of RCC chajjas, roof projections, fins, facia and similar works by dismantling of loose and damaged/ disintegrated portion of edges (cross sectional area not exceeding 150 sqcm) and cement mortar 1:4 or cement concrete 1:1½:3 type A0 and chicken wire mesh with nails (to hold fresh mortar/concrete) including necessary formwork etc. and scaffolding for work upto four storied buildings and finishing the surface by white wash or cement base paint to match the surface with existing work.

S&F stainless steel tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed

S&F IInd class hard wood factory made Glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass, gauze, etc. (divided in to square with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mi-tred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Sec-tion 8, cla-use 8.20 (a); supplied and fitted to chowkats complete all as specified and directed

S&F 35 mm thick Second class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed

S&F 40 mm thick Flush shutters, solid core construction, particle board core and plywood face panels, commercial type on both sides complete all as specified and directed

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of apreature 1.40mm and fixed in aluminium windows, wooden doors etc complete all as specified.

M&L for painting with two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces exc 10cm width or girth including preparation of wooden surfaces all as specified and directed by EIC.

S&F stainless steel sliding door bolt 300mm long with hasp & staple (bolt type) and fixing chops of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and directed

S&F stainless steel tower bolt 200 mm long complete all as specified and directed approved by Engineer-in-Charge

S&F 150 mm aluminium alloy handels cast/plate type

S&F 100 mm Butt hinges,medium weight cold rolled Stainless steel all as specified & directed. approved by Engineer-in-Charge

S&F stainless steel tower bolt 150 mm long complete all as specified and directed approved by Engineer-in-Charge

S&F 200 mm stainless steel handels pull type complete all as specified and directed approved by Engineer-in-Charge

S&F aluminium extruded section body Door closer hydrau lically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specifed and directed.

S&F aluminium anodised powder coated (min thickness 50 microns) frame for doors, windows, ventilators, complete all as specifed and directed.

S&FAnodised aluminium powder coated door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. including suitable prelaminated particle board fix in half portion of door shutter complete all as specified complete all as specifed and directed

S&FAluminium anodised powder coated window and ventilator shutter, sliding type without sash bar, alumn section section weighing not less than 0.55 kg per mtr incl necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specifed and directed.

S&F Anodised aluminium powder coated window and ventilator shutters, side/top hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified.

S&F Sheet glass ordinary quality 4.00 mm thick exc 0.5 sqm each pane with Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specifed and directed.

S&F II nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, sup-plied and fixed

M&L for painting with one coat of synthetic enamel paint on old wooden surfaces exc 10cm width or girth including preparation of old surfaces all as specified and directed by EIC.

M&L for Machine pressed precast conctete interlocking paver block with grey cement and pigment with rubber moulded glossy finished surface, any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade laid over and including 30 mm thick stone dust cushion.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and making good to wall and roof joint.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutter, drip and straight flashing.

S&F rolled mild steel Joist, channel, angle, flat sections, fixed independently, without connecting plates, or M S tubular sections etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) grade Fe 290( E-165) all as directed by Engr-in-charge

S&F Mild steel Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 ® complete all as specified and directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as directed by Engr-in-charge

M&L for preparation of new steel surfaces and applying two coat of synthetic enamel paint over one coat of red oxide primer on new steel surfaces, girth or width exc 10cm

Supply & Fixing stainless steel curtain rails of 25mm dia metre stops, rollers etc all as specified and directed.

Supply & Fixing stainless steel brackets with fancy knob of 25mm dia metre stops, rollers etc all as specified and directed approved by Engineer-in-Charge

S&F stainless steel Soap dish of standard size with screws complete all as specified and directed approved by Engineer-in-Charge

M&L for Complete removal of existing treatment and applying 3 mm thick wall care putty incl primer coat as prepratory to distemper and applying two coats of oil bound emulsion white or tinted on walls / ceilings

M&L for complete removal of existing wall surfaces and applying two coats of Acrylic weather proof exterior paint over water based primer including prepare of surface complete all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed by the Engineer - in - Charge.

Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point

Providing precast RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, cover slabs (for manholes etc) chulla hoods, chajjas shelves and similar articles and set in CM 1:6 etc complete all as directed

M&L for Mild steel TMT bars of 10mm dia and over,cut to length,bent to shape required,including cranking,bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

All as per Item No.123.00 above but size 6 to 8 mm dia

Taking down carefully copper/aluminium point wiring complete (light,fan, plug point & power complete alongwith fittings (switches, ceiling roses, tube light fittings, bulk head fitting, regulator, sockets, main switches, DB removing materials to store & making good of disturb surfaces of wall/floors etc as specified & directed.

M&L for Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLS type drawn through and including PVC concealed conduit (ISI marked) of adequate size and its accessories with sunk cast iron/pressed steel terminal boxes of size 1.2mm thick, with modular cover plate with frame of adequate required modules for one light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable (multistrand), FRLS type, PVC insulated and unsheathed with colour code earth wire connected to common earth dolly at one end and metalic bodies of luminaires/ fan at other end complete all as specified and directed for One light point/ fan point controlled by one, one way switch. Note:- Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc.

All as per ser item No. 126.00 here in before but size One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified.

All as per ser item No. 126.00 here in before but with 2.5 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 6 pin socket outlet point including PVC cable 4 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to commen earth & earth terminals including boards for mounting purposes.

All as per ser item No. 126.00 here in before but on independent board.

M&L for Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLS type drawn through and including PVC casing and caping (ISI marked) of adequate size and its accessories with sunk cast iron/pressed steel terminal boxes of size 1.2mm thick, with modular cover plate with frame of adequate required modules for one light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable (multistrand), FRLS type, PVC insulated and unsheathed with colour code earth wire connected to common earth dolly at one end and metalic bodies of luminaires/ fan at other end complete all as specified and directed for One light point and one fan point controlled by one, one way swtich.

All as per ser item No. 130.00 here in before but One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified.

All as per ser item No. 130.00 here in before but on independent board.

All as per ser item No. 130.00 here in before but with 2.5 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 6 pin socket outlet point including PVC cable 2.5 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to commen earth & earth terminals including Fibre insulation boards, treated on one face only of adequate size for mounting purposes.

Supply and fixing in replacement of switch modular type 6 Amps one way, 1 module, AC 230 Volts, LED based indicator, shrouded terminal, ISI marked complete all as specified and directed.

Supply and fixing in replacement of modular type socket 6 Amps 3 pin round socket with child safety shutter (ISI marke), AC 230 Volts, shrouded terminals, smooth plug removal and insertion complete all as specified and directed.

Supply and fixing in replacement of switch modular type 16 Amps one way, 1 module, AC 230 Volts, LED based indicator, shrouded terminal, ISI marked complete all as specified and directed.

Supply and fixing in replacement of modular type socket 6 Amps/ 16 Amp 3 pin socket with child safety shutter (ISI marke), AC 230 Volts, shrouded terminals, smooth plug removal and insertion complete all as specified and directed.

Supply and fixing in replacement of invertor LED bulkhead 10 watt 220 volts AC with IP 65 protection with inbuilt battery back-up complete with drivers, clamps and accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.

Supply and fix in replacement ceiling rose surface PVC 50mm dia 3 terminals including PVC mounting block white/ivory finish.

Supply and fixing in replacement of modular type fan 8 step regulator, 100 watt, AC 230 Volts, 2 module, laser marking complete all as specified and directed. .

Supply and fixing in replacement of invertor LED luminaire 600 x 600mm, 36 watt, 220 volts AC recessed/ surface type fittings, IP 20 with battery backup, epoxy powder coated CRCA sheet housing with electronic driver, connector block, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.

Supply and fixing in replacement of 30 Watt invertor LED street light fitting luminaire, energy saving and environmental friendly long life LED street light made up of PDC housing with IP 66 and inbuilt battery back-up for 4-6 hours complete including fixing arrangement in existing pipe and connecting up with 2/3 core flexible coppper conductor cable and all as specified by Engr-in-Charge.

Supply and fixing in replacement of LED 20 Watt inverter LED batten with rod complete with lithium ion battery with charging time 8-10 hours and backup time upto 4 hours mounted on square box of suitable size connecting up with three core flexible copper conductor cable of suitable size from ceiling rose.

Supply and fixing in replacement of invertor LED round shape 15 watt 220 volts AC recessed/ surface mounted type with high efficacy PMMA diffuser soft glare free light complete with drivers, battery backup, clamps and suitable size as per ground requirement complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.

Supply and fixing in replacement of sheet metal enclosures with plug socket single pole and neutral with two pin and earth plug and with one MCB of 20 Amps (SP) complete all as specified.

Supply and fixing in replacement of sheet metal enclosures with plug socket triple pole and earth enclosure with three pin and earth plug with socket, 415 volts complete with one MCB of 63 Amps (TP) complete all as specified.

Supply and fixing in replacement of submain wiring with four single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 6 Sqmm drawn through in and including PVC heavy duty surface casing caping including 6 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed.

Supply and fixing in replacement of submain wiring with four single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 10 Sqmm drawn through in and including PVC heavy duty surface casing caping including 10 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note for Srl item No.147.00 to 148.00 herein before :- (i) Four runs of cables and one run of continuous earthing cable drawn in casing and caping will be measured as one length of sub main. (ii) PVC casing caping and its accessories is deem to be included in this item rates. (iii) Unit rate include for cutting chases for sinking for boxes and making good to wall, floors etc.

Supply and fixing in replacement of submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 6 Sqmm drawn through in and including PVC heavy duty surface casing caping including 6 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed.

Supply and fixing in replacement of submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 4 Sqmm drawn through in and including PVC heavy duty surface casing caping including 4 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed.

Supply and fixing in replacement of submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 2.5 Sqmm drawn through in and including PVC heavy duty surface casing caping including 2.5 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note for Srl item No.149.00 to 151.00 herein before :- (i) Two runs of cables and one run of continuous earting cable drawn in casing and caping will be measured as one length of sub main. (ii) PVC casing caping and its accessories is deem to be included in this item rates. (iii) Unit rate include for cutting chases for sinking for boxes and making good to wall, floors etc.

Supply and fixing in replacement sheet metal enclosure (factory made), TPN Vertical Distribution Boards (MCCB Incomer) IP43 protection Double Door : Plain 4 way with 200 Amps rated busbar all as specified and directed.

Supply and fixing in replacement sheet metal enclosure (factory made), TPN Vertical Distribution Boards (MCCB Incomer) IP43 protection Double Door : Plain 8 way with 200 Amps rated busbar all as specified and directed.

Supply and fix in replacement distribution board sheet metal enclosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 415 volts, 200 Amp rated bus bar with front openable cover suitable for TP & N 4 ways all as specified & directed.

Supply and fix in replacement distribution board sheet metal enclosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 8 ways all as specified & directed.

Supply and fixing distribution board sheet metal enclosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 4 ways all as specified & directed.

Supply and fixing in replacement 4 Pole MCCB 125 Amp, 50 Hz, 415 V, with adjustable thermal & adjustable magnetic setting, breaking capacity 25 KA.

Supply and fixing of MCB SP 6-32 Amps, 230 Volts, 50 Hz with 10 KA .

Supply and fix in replacement MCB FP 63 Amp, 415 Volts, 50 Hz with 10 KA.

Supply and Fixing in replacement of MCB SPN 6-32 Amps, 230 Volts, 50 Hz with 10 KA.

Supply and Fixing in replacement of MCB SP 6-32 Amps, 230 Volts, 50 Hz with 10 KA.

Supply and laying or fixing or passing through pipe 1100 volts grade heavy duty cable with PVC insulated stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed of size 10 Sqmm 2 core complete all as specified and directed.

M&L for Double Walled Corrugated DWC HDPE Pipe of outer dia 50mm and innter dia 38mm including 90 degree bends with coupler and rubber ring laid in trenches of size 50 mm suitable for cable protection of size 2 core 10 sqmm to 3.5 core 50 sqmm cable complete all as specified and directed.

M&L for Earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level connecting to the GI wire 4.0 mm dia, by means nut bolt, nuts, check nuts and washer of the GI Earth wire protected by provision of GI light grade pipe 15 mm, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, taste point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 mtr, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point all as specified incl testing on completion”.

NOTE : - AMOUNT OF SCHEDULE OF CREDIT RS. 32,446.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

M/S K. K. Construction (BID ID -3144176)

M/S SAMEER SUBHASH PATANI (BID ID -3143192)

Vinod Enterprises (BID ID -3148394)

J Sams Contructions (BID ID -3143914)

MAHIMA CONSTRUCTION (BID ID -3140284)

M/S R.K.S. CONSTRUCTION (BID ID -3137635)

DHARMESH ENTERPRISES (BID ID -3150777)

SHILPVED (BID ID -3150737)

MANOVANDANA CONSTRUCTION (BID ID -3148377)

Bidder Name

MAHIMA CONSTRUCTION

M/S SAMEER SUBHASH PATANI

M/S K. K. Construction

J Sams Contructions

Vinod Enterprises

SHILPVED

Srujan Associates

M/S R.K.S. CONSTRUCTION

MANOVANDANA CONSTRUCTION

DHARMESH ENTERPRISES