Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.9 LAccepted-AOC 21 H D LAMA ROAD WARD NO 22 DARJEELING | DARJEELING | DARJEELING | WEST BENGAL | L1 | Accepted-AOC Being L1 is accepted | |
| 2 | L2₹5.2 L+₹20,420.81 (4.13%)Rejected-Finance | L2 | Rejected-Finance Being L2 is rejected | |
| 3 | L3₹5.2 L+₹25,523.80 (5.16%)Rejected-Finance UPPER PRASANTI GRAM SONADA DARJEELING 734219 | SONADA | DARJEELING | WEST BENGAL | 734219 | L3 | Rejected-Finance Being L3 is rejected |
Tender Value
Refer Docs
EMD Value
₹11,000
Closing Date
21 Oct 2024, 12:00 pmClosed
EE/DED
Opposite of PWD Inspection Bungalow Kachari Road, Siliguri 734001, District Darjeeling
Electrical Installation Work for provision of DG Power Back-Up at The Office of the Chief Medical Officer of Health, Darjeeling in the district of Darjeeling.
2024_WBPWD_760733_1
WBPWD/EE/DED/e-NIT-26 of 2024-25
Open Tender
ELECTRICAL WORKS ORG
Item Rate
14 days
DARJEELING
Please refer Tender documents.
4 documents required · 4 mandatory
₹11,000
24 Feb 2025
1 Oct 2024
23 Oct 2024
1 Oct 2024
21 Oct 2024
1 Oct 2024
Amount
Cost of thorough servicing of 100KVA DG set including replacement of Engine Oil (15W 40), Coolant (1:7), Filter Kit (Diesel, Lub & Water Seperator) and other defective electrical accessories as per the direction of EIC.
DG Pannel--Supply, Installation , Testing & Commissioning of floor-cum-wall mounted cubical type self supporting compartmentalized with separate bus & cable alleys made of 3mm thick CRCA sheet & angle iron frame supported incl. necy. interconnection by suitable size & grade copper cable / solid link/ flat bar incl. making cable end terminal box float boxes after making drill holes ect. As required incl. painting the panel board by powder coated paint as per direction of E.I.C and S & F of the following.
INCOMING:415Volt, 200A FN type TPN main switch- 1 no (make L&T)
Bus Bar Chamber: 415 Volts, 4 Nos. 315A Amp capacity Electrolytic Copper Bars on DMC/ porcelain insulator of suitable length incl. drill hole etc. as required and as approved by E.I.C
OUTGOING: (i) 415 Volt 125 Amp FN type TPN main switch with HRC fuses - 2 no (make L&T) (ii) 415 Volt 100 Amp FN type TPN main switch with HRC fuses - 1 no (make L&T) spare.
Supplying and fixing 415V, 125A FP on load front operated Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc.
Supplying and fixing 415V,125A TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating.
Supply & Delivery 1.1KV Grade XLPE/PVC insulated PVC sheathed steel armoured Al. Conductor Cable of the following size and confirming to IS 7098(Part-I): 1988/1554 (Part-I): 1988/5831:1984/ 3961(Part-I):1967/ 3975:1970/ 10810:1984 /3975:1970/8130:1984/3961: 1967 /10418:1982/10810:1984 as amended upto date, in respect of component materials and test [Nico/Gloster/Polycab/ Havells/RR Kable/KEI] (a) 4 core 120 Sq.mm DG to DG panel incoming
(b) 4 core 50 Sq.mm DG panel to C/O
Laying of cable above 3½ core 90 sqmm and upto 3½ core 150 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. As necy., mending good damages and painting.
Laying of cable from 3/3½ core 35 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting.
Laying of one No. cable above 35 sqmm and upto 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. Bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed.
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : 4 core 120 Sq.mm
4 core 50 Sq.mm
Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket, tapes, anticorrosive paste & jointing materials : 4 core 120 Sq.mm
4 core 50 Sq.mm DG panel to C/O
Supply & fixing of exhaust pipe of 125 mm dia MS black class B pipe welded and bolted incl all necy bend, supports,, clamps and anti vibration mounting. Insulation: 50mm thick mineral wool covered with wire mesh and AL. cladding as per CPCB-II norms and as directed by EIC.
Supply & Fixing of special type MS angle iron bracket support made of 40X40X6 mm. MS angle with flat iron clamp with nuts and bolts and washerds etc. for 125mm dia pipe.
Supply and fixing of rain protection canopy for 125mm dia pipe.
Hiring Charges for scaffolding by bamboo required rope of square type arrangement for smooth working & carriage of MS black pipe by vertical run & dismantling at the end of work.
PREM LAMA (BID ID -5681960)
M/S Samir Electric (BID ID -5681943)
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .