KMC/ASPH/PB/PSD-10/2025-26

TOTAL

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Supply and fitting fixing of Air Dryer Assy. ( as per sample)

Supply and fitting fixing of Air Dryer Assy kit. ( as per sample)

Supply of Clutch oil (Dot-4)

Supply and fitting fixing of Bendix penion (as per sample)

Supply and fitting fixing of Self Carbon 24V (as per sample)

Supply and fitting fixing of Fuel Filter Assy. (as per sample)

Supply and fitting fixing of Drag link rod (as per sample)

Supply and fitting fixing of king pin Assy

Supply and fitting fixing of self starter drive pinion ( as per sample)

Supply and fitting fixing of Alternator Assy 24V(as per sample)

Supply and fitting fixing of Tie rod end (as per sample)

Supply and fitting fixing of Field Coil assy. (as per sample)

Supply and fitting fixing of clutch Pressure plate Assy. (as per sample)

Supply and fitting fixing of Dynamo cutout (as per sample)

Supply and fitting fixing of PTO cylinder kit

Supply and fitting fixing of Shelf solenoid switch (as per sample)

Supply and fitting fixing of Power steering pump (as per sample)

Supply and fitting fixing of cross disc ( as per sample)

Supply and fitting fixing of Rectifier (as per sample)

Supply and fitting fixing of Cam plate ( as per sample)

Supply and fitting fixing of Clutch release bearing (as per sample)

Supply and fitting fixing of Engine oil filter (as per sample)

Supply and fitting fixing of support ring ( as per sample)

Supply and fitting fixing of Release Bearing with hub ( as per sample)

Supply and fitting fixing of Air Filter (inner & outer) (as per sample)

Supply and fitting fixing of Clutch master cylinder complete (as per sample)

Supply and fitting fixing of Tapper roller assy ( as per sample)

Supply and fitting fixing of clutch Service kit (as per sample)

Supply and fitting fixing of Brake chamber (Rear) ( as per sample)

Supply and fitting fixing of Fly wheel ring gear ( as per sample)

Supply and fitting fixing of Air pipe Aluminium 3” dia ( as per sample)

Supply and fitting fixing of Dash board Assy ( as per sample)

Supply and fitting fixing of hydraulic main pipe ( as per sample)

Supply and fitting fixing of propeller shaft U/J cross ( as per sample)

Supply and fitting fixing of Door lock with inner handle

Supply and fitting fixing of Brake chamber (Front) ( as per sample)

Supply and fitting fixing of silencer box complete set ( as per sample)

Supply and fitting fixing of PTO pump assy.

Supply of steering oil (Castrol ATF)

Supply and fitting fixing of Back light ( as per sample)

Supply and fitting fixing of head light ( as per sample)

Supply and fitting fixing of Propeller shaft york (as per sample)

Supply and fitting fixing of Shelf housing (as per sample)

Supply and fitting fixing of clutch booster cylinder ( as per sample)

Supply of Teflon Tape

Supply and fitting fixing of Clutch disc Assy. (as per sample)

Supply and fitting fixing of Head light Assy. (as per sample)

M.S. Sheet required for thorough repairing of cabin, front show, floor, roof, front glass frame etc of cabin. M.S. Sheet for Driver cabin: A) 3(1.280m X 1.9m) – 2 ( 0.900m X 0.750m)-1(0.900m X 0.300m) + 4( 1.280m X 2.438m)-2(0.750m X 0.750m)-2(0.600m X 0.60m)= 16.313m2 X 0.0016m=0.0261008m3 X 7850 km/m3= 204.89kg Roof: B) (1.980m X 2.4384m) X 0.0016 + ( 2.438m X 1.980m) X 0.002= 0.007724 m3+ 0.009654m3= 0.017378 m3 X 7850kg/m3=136.41kg Total A+B= (204.89 kg+ 136.41 kg)= 341.30kg

M.S. Sheet required for rear load body, floor, side walls back dala etc. with appropriate thickness. [2(0.762m X 4.08m)+1(0.762m X 2.438m)+1(2.438mX 1.4732m)] X 0.0025m+ (4.08m X2.438m) X 0.003m =[6.21m+ 1.86m + 3.59m] X 0.0025m + [9.94m X 0.003m=11.66 X 0.0025 + 9.94 X 0.003 = 0.02915 m3 + 0.02982m3 X 7850 kg/m3 = 0.05897m3 X 7850 kg/ m3= 462.91kg

M.S. Angle required (40 mm X 40 mm X 6 mm) for cabin structure, floor, walls etc. 2.46m X 6 + 1.8m X 8 + 1.1m X 6 + 1.35X3 = 14.76+ 14.4 + 6.6 + 4.05 = 39.81 m X 3.768kg/m= 150kg

M.S channel ( 100mm X 50 mm X 6mm) required for repairing of rear load body structure. 2.438m X 2 + 0.900m X 8 + 1m X 4 = 16.07m X 9.56kg/m = 153.68kg

Gas cutting of old worn out and damaged portion of cabin and load body. Gas cutting area: (2 X 198 cm + 2 X 243 cm) X 0.2 cm + ( 4X200cm) X 0.16cm + 2(508 cm + 243cm) X 0.25cm + 6(90cm X 0.6 cm) = 176.4 cm2 + 128 cm2 + 375.5 cm2 + 324 cm2 = 1003.9 cm2

Continuous welding for cabin, cabin structure, floor, rear load body. A) Load body: 2(5.08 + 2.438) + 2(2.438) + 2( 5.08 + 2.438) + 1.4732 = 364212m = 3642cm B) Cabin Floor: 2(1.980 X 2.4384)= 9.6m=960 cm Total A+B 3642cm + 960cm =4602 cm

Scraping & cleaning, Painting & synthetic enamel paint area Cabin: A) 4( 1.980m X 2.0066m) – 2(0.900m X 0.750m)- 1( 0.900m X 0.300m) + 4(1.980m X 2.438m)-2( 0.600m X 0.600m) +1 (1.980m X 2.4384m) +( 2.438m X 1.980m) =15.89-1.35-0.27+19.30-1.125-0.72 + 4.82 + 4.82 = 14.27+ 17.455 + 4.82 + 4.82 = 41.365m2 Load Body: B) 4(0.762m X 5.08m) + 2( 0.762m X 2.438m) + 2( 2.438m X1.4732m) +2 (5.08m X 2.438m) = (15.48 + 3.71 + 7.18 + 24.77) m2 = 51.14m2 Total= A+B= ( 41.365+ 51.14)m2= 92.505m2

Priming Area: A) 4( 1.980m X 2.0066m) – 2(0.900m X 0.750m)- 1( 0.900m X 0.300m) + 4(1.980m X 2.438m)-2( 0.600m X 0.600m) +1 (1.980m X 2.4384m) +( 2.438m X 1.980m) =15.89-1.35-0.27+19.30-1.125-0.72 + 4.82 + 4.82 = 14.27+ 17.455 + 4.82 + 4.82 = 41.365m2 Load Body: B) 4(0.762m X 5.08m) + 2( 0.762m X 2.438m) + 2( 2.438m X1.4732m) +2 (5.08m X 2.438m) = (15.48 + 3.71 + 7.18 + 24.77) m2 = 51.14m2 Total= A+B= ( 41.365+ 51.14)m2= 92.505m2

Synthetic Enamel Paint area: A) 4( 1.980m X 2.0066m) – 2(0.900m X 0.750m)- 1( 0.900m X 0.300m) + 4(1.980m X 2.438m)-2( 0.600m X 0.600m) +1 (1.980m X 2.4384m) +( 2.438m X 1.980m) =15.89-1.35-0.27+19.30-1.125-0.72 + 4.82 + 4.82 = 14.27+ 17.455 + 4.82 + 4.82 = 41.365m2 Load Body: B) 4(0.762m X 5.08m) + 2( 0.762m X 2.438m) + 2( 2.438m X1.4732m) +2 (5.08m X 2.438m) = (15.48 + 3.71 + 7.18 + 24.77) m2 = 51.14m2 Total= A+B= ( 41.365+ 51.14)m2= 92.505m2

Please Enable Macros to View BoQ information