REPAIR/MAINT OF PUMPING MACHINERY, EXT WATER SUPPLY, CONTROL VALVES, PANEL BOARDS AND CERTAIN MISC E/M WORK AT MIC AND S UNDER GE (S) AHMEDNAGAR

Amount

Excavation in trenches not exc 1.50 m wide and not exc 1.50 m deep for foundation, laying of pipe or for shafts, wells cesspits,man holes etc not exc 10 Sqm on plan and n exc 1.5m in depth and getting out in soft / loose soil complete all as specified and as directed.

Returning filling in soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick including making good disturbed surfaces complete all as specified and as directed.

Removing excavated soil to distance not exc. 50 m and depositing where directed at a level not exc. 1.5 m above the starting point etc complete all as specified and as directed.

M&L for cutting the existing bituminous road / PCC hard standing upto 75cm in depth, 60cm in width, getting out excavated materials and making good the damaged portion after laying of pipes by returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick and PCC 1:2:4 type B1 using 20mm graded stone aggregate upto 30cm depth from top of the road all as specified and as directed.

M&L for repair / rectification of leakages of existing GI tubing 15 mm bore laid in trenches, floors or on wall, roof by replacing with new fittings such as unions, sockets, nipples, tees, elbows, reducers etc including threading, cutting, jointing complete and excavation upto 01 cum in trenches all as specified and as directed

All as per serial item No. 05 here-in-before but 20 mm bore GI pipe.

All as per serial item No. 05 here-in-before but 25 mm bore GI pipe.

All as per serial item No. 05 here-in-before but 40 mm GI bore pipe.

All as per serial item No. 05 here-in-before but 50 mm GI bore pipe.

All as per serial item No. 05 here-in-before but 80 mm GI bore pipe.

All as per serial item No. 05 here-in-before but 100 mm GI bore pipe.

M&L for repairs / rectification of leakages of existing UPVC/CPVC pipe 15 mm bore, laid in trenches, floors or on wall, roof by replacing new fittings such as union, sockets, nipples, tees, elbows, reducers etc including threading, cutting, jointing complete all as specified and as directed.

All as per serial item No. 12 here-in-before but 20 mm bore pipe.

All as per serial item No. 12 here-in-before but 25 mm bore pipe.

All as per serial item No. 12 here-in-before but 40 mm bore pipe.

All as per serial item No. 12 here-in-before but 50 mm bore pipe.

M&L for UPVC pipes, 15 mm bore (Pressure rating 10 kgf/cm²) laid in trenches / floors or fixed to wall in any length with all UPVC fitting such as sockets, bends, elbows, tees, reducers, unions, jointing materials etc and pressure testing, washing out complete including dismantling/ taking out old pipe complete all as specified and as directed.

All as per serial item No. 17 here-in-before but 20 mm bore pipe.

All as per serial item No. 17 here-in-before but 25 mm bore pipe.

All as per serial item No. 17 here-in-before but 40 mm bore pipe.

All as per serial item No. 17 here-in-before but 50 mm bore pipe.

Taking up or down choked GI water pipes15 mm bore and fittings including proper cleaning by internal brushing, removing chocking and refixing / relaying in place, jointing, pressure testing and washing out complete all as specified and as directed.

All as per serial item No. 22 here-in-before but 20 mm bore pipe.

All as per serial item No. 22 here-in-before but 25 mm bore pipe.

All as per serial item No. 22 here-in-before but 40 mm bore pipe.

All as per serial item No. 22 here-in-before but 50 mm bore pipe.

All as per serial item No. 22 here-in-before but 80 mm bore pipe.

All as per serial item No. 22 here-in-before but 100 mm bore pipe.

M&L for GI tubing, medium grade, 15 mm bore laid in trenches / floors or fixed to wall in any length with all galvanised GI fitting such as sockets, bends, elbows, tees, reducers, unions, jointing materials etc complete including dismantling/ taking out old pipes all as specified and as directed.

All as per serial item No. 29 here-in-before but 20 mm bore pipe.

All as per serial item No. 29 here-in-before but 25 mm bore pipe.

All as per serial item No. 29 here-in-before but 40 mm bore pipe.

All as per serial item No. 29 here-in-before but 50 mm bore pipe.

All as per serial item No. 29 here-in-before but 80 mm bore pipe.

All as per serial item No. 29 here-in-before but 100 mm bore pipe.

S&F in repairs gun metal, globe or gate valves, 15 mm bore, ISI marked, screwed both ends suitable for GI tubing with side way operating GI lever handle complete all as specified and as directed.

All as per serial item No. 36 here-in-before but 20 mm bore

All as per serial item No. 36 here-in-before but 25 mm bore

All as per serial item No. 36 here-in-before but 40 mm bore

All as per serial item No. 36 here-in-before but 50 mm bore

Taking up CI/DI water mains 80 mm bore including all fittings with spigot and socket ends including burning out joints, removing lead and proper cleaning by internal brushing, removing chocking and refixing in the same positon including testing all as specified and as directed. Note : Run lead joints shall be measured and paid seperately.

All as per serial item No. 41 here-in-before but 100 mm bore pipe.

All as per serial item No. 41 here-in-before but 150 mm bore pipe.

All as per serial item No. 41 here-in-before but 200 mm bore pipe.

All as per serial item No. 41 here-in-before but 250 mm bore pipe.

All as per serial item No. 41 here-in-before but 300 mm bore pipe.

All as per serial item No. 41 here-in-before but 350 mm bore pipe.

M&L for laying, jointing ductile iron pipe, 80 mm bore with spigot and socket ends, centrifugally cast, class DI-K9, cement mortar lining with portland slag cement as per IS 455: 1989, metallic Zinc coating as per Annex A of IS-8329 with finishing layer of bituminous coating as per Annex C of IS 8329, suitable for rubber gasket joint, conforming to IS: 8329 : 2000, ISI marked, in any length laid in trenches, pressure testing, washing out complete including dismantling, taking out old corroded pipe line with all fittings complete all as specified and as directed.

All as per serial item No. 48 here-in-before but 100 mm bore pipe.

All as per serial item No. 48 here-in-before but 150 mm bore pipe.

All as per serial item No. 48 here-in-before but 200 mm bore pipe.

All as per serial item No. 48 here-in-before but 250 mm bore pipe.

All as per serial item No. 48 here-in-before but 300 mm bore pipe.

All as per serial item No. 48 here-in-before but 350 mm bore pipe.

M&L for drilling, tapping, cast iron / ductile iron water main ( any dia) in position for branch connection with straight plain brass ferrule of suitable size for 15mm bore branch connetion complete all as specified and as directed

All as per serial item No. 55 here-in-before but for 20mm bore pipe.

M&L for CI / DI fittings and specials such as Bends (any type, radius and angle), Tapers any type (straight, bend, increasing, decreasing or double socket etc.), Tee pieces single branch, "Y" junction, Double branch, Cross (all sockets or socket and spigot), Collars, Caps, Plugs, Connecting pieces one end flanged and other end socketed or spigot ends or all socketed / spigot ends etc upto 150 mm bore complete all as specified and as directed.

All as per serial item No. 57 here-in-before but for 200 to 300 mm bore all as specified and as directed.

M&L for burning out lead joints in position including removing old lead for 80 mm bore pipe complete all as specified and as directed

All as per serial item No. 59 here-in-before but 100 mm bore pipe.

All as per serial item No. 59 here-in-before but 150 mm bore pipe.

All as per serial item No. 59 here-in-before but 200 mm bore pipe.

All as per serial item No. 59 here-in-before but 250 mm bore pipe.

All as per serial item No. 59 here-in-before but 300 mm bore pipe.

All as per serial item No. 59 here-in-before but 350 mm bore pipe.

M&L for run lead joint complete and pressure testing for 80 mm bore line complete all as specified and as directed

All as per serial item No. 66 here-in-before but 100 mm bore pipe.

All as per serial item No. 66 here-in-before but 150 mm bore pipe.

All as per serial item No. 66 here-in-before but 200 mm bore pipe.

All as per serial item No. 66 here-in-before but 250 mm bore pipe.

All as per serial item No. 66 here-in-before but 300 mm bore pipe.

All as per serial item No. 66 here-in-before but 350 mm bore pipe.

M&L for Styrene Butadiene Rubber Gasket (IS : 5382) joint suitable for 80 mm bore DI pipes with spigot and socket ends, Class K9 and pressure testing complete all as specified and as directed.

All as per serial item No. 73 here-in-before but 100 mm bore pipe.

All as per serial item No. 73 here-in-before but 150 mm bore pipe.

All as per serial item No. 73 here-in-before but 200 mm bore pipe.

All as per serial item No. 73 here-in-before but 250 mm bore pipe.

All as per serial item No. 73 here-in-before but 300 mm bore pipe.

All as per serial item No. 73 here-in-before but 350 mm bore pipe.

M&L for mechanical joints having 2 Nos CI / DI Sockets, 1No CI / DI Collar and 2Nos Styrene Butadiene Rubber Gaskets alongwith nuts, bolts, washers , gaskets etc. for 80mm bore including cutting CI / DI pipe and reducing to required length for insertion of mechanical joint in position complete all as specified and as directed.

All as per serial item No. 80 here-in-before but 100 mm bore pipe.

All as per serial item No. 80 here-in-before but 150 mm bore pipe.

All as per serial item No. 80 here-in-before but 200 mm bore pipe.

All as per serial item No. 80 here-in-before but 250 mm bore pipe.

All as per serial item No. 80 here-in-before but 300 mm bore pipe.

All as per serial item No. 80 here-in-before but 350 mm bore pipe.

M&L for taking out sluice valves, 80mm bore, refacing, regrinding including taking apart and reassembling, refixing, replacing nuts, bolts, washers and replacement of rubber gasket, gland, packing, brass check nuts complete all as specified and as directed.

All as per serial item No. 87 here-in-before but 100 mm bore

All as per serial item No. 87 here-in-before but 150 mm bore

All as per serial item No. 87 here-in-before but 200 mm bore

All as per serial item No. 87 here-in-before but 250 mm bore

All as per serial item No. 87 here-in-before but 300 mm bore

M&L for taking out old gland and nut bolts from existing sluice valves, 80mm bore and replacement of gland, packing including taking apart and reassembling, refixing, replacing Nuts, bolts, washers complete all as specified and as directed.

All as per serial item No. 93 here-in-before but 100 mm bore

All as per serial item No. 93 here-in-before but 150 mm bore

All as per serial item No. 93 here-in-before but 200 mm bore

All as per serial item No. 93 here-in-before but 250 mm bore

All as per serial item No. 93 here-in-before but 300 mm bore

M&L for sluice valve, 80mm bore, cast iron, long body, both ends flanged as per IS-14846 and drilled with stainless steel spindle iron wheel head and as per pressure rating PN 1.6, Class I, ISI Marked alongwith nuts, bolts, washers , gaskets etc. including dismantling and taking out sluice valve from valve chamber / trenches complete all as specified and as directed.

All as per serial item No. 99 here-in-before but 100 mm bore

All as per serial item No. 99 here-in-before but 150 mm bore

All as per serial item No. 99 here-in-before but 200 mm bore

All as per serial item No. 99 here-in-before but 250 mm bore

S&F rubber lined non return valve B-02 ( Ball type) cast iron body, flanged ends, 100mm bore including neophrene ball and by pass arrangements complete including suitable flanges, nuts, bolts, washers and rubbber gaskets including dismantling and taking down old unserviceable non return vave all as specified and as directed.

All as per serial item No. 104 here-in-before but 150 mm bore

All as per serial item No. 104 here-in-before but 200 mm bore

S&F CI ball foot valve flanged B-05 (N) valve, 80mm sizes including taking down old unserviceable foot valve all as specified and as directed.

All as per serial item No. 107 here-in-before but 100 mm bore

All as per serial item No. 107 here-in-before but 150 mm bore

All as per serial item No. 107 here-in-before but 200 mm bore

All as per serial item No. 107 here-in-before but 250 mm bore

S&F CI/DI Strainer valve, 100 mm bore complete including taking down old unserviceable stainer valve all as specified and as directed.

All as per serial item No. 112 here-in-before but 150 mm bore

All as per serial item No. 112 here-in-before but 200 mm bore

M&L for construction of valve pit chamber internal dimension 1100mmx1100mmx1100mm with and including PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) for foundation, 23 cm thick brick wall in cement mortar 1:4, 15 mm thick rendering all around the brick work in cement mortar 1:6, 75 mm thick PCC (1:2:4) type B-1 and 75mm thick coping using 20mm graded stone aggregate including necessary form work for grouted including 2 mm thick MS top sheet cover with locking arrangements, Mild Steel frame made out of 40x40x6 mm angle iron including painting of steel surface with two coats of synthetic enamel paint over a coat of red oxide primer as finishing coat tosteel surfaces including demolition of existing valve chamber and clearing the debris complete all as specified and directed.

All as per serial item No 115 here-in-before but internal dimension 900x900x900mm

Taking down carefully existing unservicable water level indicator from OHT/ UG SUMPS and repair with and including replacement of new heavy duty polythene flooting ball, nylon rope of 10 mm dia, run over CI pully of 65mm dia, MS sheet made of 18 gauge as reqd at site fixed on angle iron frame of 40 x 40 x 6 mm size complete including calibrated scale gms sheet duly marked with approved radium paint / best quality radium tape , glowing in night, indicator point and proper fixing arrangements all as specified and as directed.

S&F star coupling, heavy duty, Styrene Butadiene Rubber suitable for 50/25/15/7.5 HP pump or motor, including taking down old unserviceable star coupling all as specified & directed.

Taking LT shutdown, dismantle and remove the 50 HP electric motor of the mono block / coupled pump set from existing foundation / position, shifting to authorized workshop for the repair work, removing the burnt winding, cleaning rotor / stator slots, rewinding the motor with super enamelled copper wire of the size equivalent to the original winding including insulated packing materials, varnishing, heating, drying etc, replacing star bush coupling, replacing the bearings, reassembling and installing back at it's original position, aligning, testing and commissioning on full load for 8 hrs continuous running all as specified and as directed

All as per serial item 119 here-in-before but 25 HP

All as per serial item 119 here-in-before but 15 HP

All as per serial item 119 here-in-before but 10 HP

All as per serial item 119 here-in-before but 7.5 HP

All as per serial item 119 here-in-before but 5 HP

S&F in repairs, CI impeller for 50 HP pumps all as specified and as directed.

S&F in repairs, bearing for 50 HP pumps all as specified and as directed.

S&F in repairs, bearing end plate for 50 HP pumps all as specified and as directed.

S&F in repairs, MS shaft for 50 HP pumps all as specified and as directed.

S&F in repairs, MS coupling for 50 HP pumps all as specified and as directed.

S&F in repairs, Seal for 50 HP pumps all as specified and as directed.

S&F in repairs, Motor fan for 50 HP pumps all as specified and as directed.

S&F in repairs, Bush for 50 HP pumps all as specified and as directed.

S&F in repairs, CI impeller for 25 HP pumps all as specified and as directed.

S&F in repairs, bearing for 25 HP pumps all as specified and as directed.

S&F in repairs, bearing end plate for 25 HP pumps all as specified and as directed.

S&F in repairs, MS shaft for 25 HP pumps all as specified and as directed.

S&F in repairs, MS coupling for 25 HP pumps all as specified and as directed.

S&F in repairs, Seal for 25 HP pumps all as specified and as directed.

S&F in repairs, Motor fan for 25 HP pumps all as specified and as directed.

S&F in repairs, Bush for 25 HP pumps all as specified and as directed.

S&F in repairs, CI impeller for 10 HP pumps all as specified and as directed.

S&F in repairs, bearing for 10 HP pumps all as specified and as directed.

S&F in repairs, bearing end plate for 10 HP pumps all as specified and as directed.

S&F in repairs, MS shaft for 10 HP pumps all as specified and as directed.

S&F in repairs, MS coupling for 10 HP pumps all as specified and as directed.

S&F in repairs, Seal for 10 HP pumps all as specified and as directed.

S&F in repairs, Motor fan for 10 HP pumps all as specified and as directed.

S&F in repairs, Bush for 10 HP pumps all as specified and as directed.

S&F in repairs, CI impeller for 7.5 HP pumps all as specified and as directed.

S&F in repairs, bearing for 7.5 HP pumps all as specified and as directed.

S&F in repairs, bearing end plate for 7.5 HP pumps all as specified and as directed.

S&F in repairs, MS shaft for 7.5 HP pumps all as specified and as directed.

S&F in repairs, MS coupling for 7.5 HP pumps all as specified and as directed.

S&F in repairs, Seal for 7.5 HP pumps all as specified and as directed.

S&F in repairs, Motor fan for 7.5 HP pumps all as specified and as directed.

S&F in repairs, Bush for 7.5 HP pumps all as specified and as directed.

S&F in repairs, bearing for 5 HP pumps all as specified and as directed.

S&F in repairs, bearing end plate for 5 HP pumps all as specified and as directed.

S&F in repairs, Seal for 5 HP pumps all as specified and as directed.

S&F in repairs, Motor fan for 5 HP pumps all as specified and as directed.

S&F in repairs, Bush for 5 HP pumps all as specified and as directed.

S&F in repairs, single phase DOL starter and all components suitable for 1.5/3/5HP submersible pump set having relay range 06-10 Amps or as per existingall as specified and as directed.

S&F in repairs, three phase DOL starter and all components suitable for 1.5/3/5 HP submersible pump set having relay range 11- 18 Amps or as per existingall as specified and as directed.

S&F in repairs, three phase DOL starter and all components suitable for 10 HP motor, having relay range 13- 21 Amps or as per existing all as specified and as directed.

S&F in repairs, three phase DOL starter and all components suitable for 25 HP motor, having relay range as per existing all as specified and as directed.

S&F in repairs, three phase DOL starter and all components suitable for 50 HP motor, having relay range as per existing all as specified and as directed.

S&F in repairs, single phase/three phase preventer suitable for fully automatic Star / Delta starter or Direct - on - Line starter all as specified and as directed.

S&F in repairs, pressure gauge swan neck type, stem with dual dial type, 0 - 7Kg / Cm² and 0 - 100 Lb / Sq inch all as specified and as directed.

Supply only Calcium hypo chlorite dry free flowing and free from lumps of following generic specifications : (a) Available Chlorine - Min 65% (b) Particle size (passing through 1.70 mm IS sieve) - Min 99.5% (c) Water insoluble matter - max 6% (d) Chalcium hydroxide - max 4% (e) Sodium chloride - max 15 % Make : Any make approved by E-in-C

S&F wireless water level Indicator from OHT/ UG Sumps including overflow and Empty Alarm, 4 levels, Long Range up to 05 Km, Brass Sensor long life Make : Swarn jal, Model : Wireless 5 Km proper fixing arrangements like service cable, electrical connection etc all as specified and as directed.

S&F ML6/ML4 power contactor of suitable/existing capacity for 50/25 HP Pump set starter 415/440 V 50 Hz , fixed in replacement complete all as directed.

Supply only total dissolved solid meter, water quality tester, PPM tester for drinking water complete all as specified and as directed. Makel : KONVIO NEER or equivalent

Supply, installing, commissioning & testing LT feeder piller panel board factory made, Indoor, cubical type, vermin proof, dust proof, water proof made out of 3.15 mm thick CRCA sheet and angle iron frame of size 50x50x6 mm inside depth not less than 50 cm and size suitable to accomodate the following accessories with insulated TPN Copper busbar of rating not less than 1.5 times the rated capacity of the incomer MCCB. both side openable (front & back) with locking arrangement duly painted with coat of synthetic enamel paint over a coat of red oxide primer both internally and externally and connecting with cable with lugs including internal wiring with copper cable of suitable size using lugs compressing the following accessories including dismantling old LT feeder piller all specified as directed. (Notes : The rate quoted shall include for earth work & excavation for angle iron frame for foundation of panel board upto 0.50 m below GL in any type of soil & PCC (1:4:8), D2 filling in foundation the ground clearance of panel board shall be 0.40 m from GL to the bottom of panel board ) and Copper bus bar 400 Amps duly colour sleeved mounted on epoxy insulators-01 set. Note:(i)Panel board shall be approved by CPRI and certificate to be produced and to be submitted in the office.(ii) Panel Board should be located at Swimming pool, MIC&S . Incoming :- (a) MCCB 250 amps, 4 pole, 35 KA - 01 Nos (b) Copper Busbar 400 Amp- 01 Set (c) Digital Load manager (voltmeter& ammeter)- 01 Set (d) Neon indicating lamps (R, Y & B) -01` Set of three- 01 Set Outgoing (a) MCCB 4 pole 100 amps, 25 KA -04 Nos (b) MCCB 4 pole 160 amps, 25 KA - 01 Nos (c) MCB 3 pole isolator C63 amps, 10 KA - 02 Nos (d) Automatic street light ON / OFF timer of capacity not less than 16 A, 3 phase, 3 Pole with suitable capacity of contactor, relays , control wiring and all acessories all as specified. - 01 Nos (e) Fully automatic Star Delta Starter suitable starter for 30 HP pump set - 03 Nos (f) Fully automatic Star Delta Starter suitable starter for 7.5 HP Blower set - 01 Nos (g) Online Change over 200 A with metal enclosure- 01 Nos

supply installing commissioning & testing LT feeder piller panel board factory made, Indoor, cubical type, vermin proof, dust proof, water proof made out of 3.15 mm thick CRCA sheet and angle iron frame of size 50x50x6 mm inside depth not less than 50 cm and size suitable to accomodate the following accessories with insulated TPN Copper busbar of rating not less than 1.5 times the rated capacity of the incomer MCCB. both side openable (front & back) with locking arrangement duly painted with coat of synthetic enamel paint over a coat of red oxide primer both internally and externally and connecting with cable with lugs including internal wiring with copper cable of suitable size using lugs compressing the following accessories including dismantling old LT feeder piller panel all specified ans as directed. (Notes : The rate quoted shall include for earth work & excavation for angle iron frame for foundation of panel board upto 0.50 m below GL in any type of soil & PCC (1:4:8), D2 filling in foundation the ground clearance of panel board shall be 0.40 m GL to the bottom of panel board ) and Copper bus bar 300 Amps duly colour sleeved mounted on epoxy insulators-01 set.Note:(i)Panel board shall be approved by CPRI and certificate to be produced and to be submitted in the office.(ii) Panel Board should be located at Magazine AC Plant, MIC&S Incoming :- (a) MCCB 160 amps, 4 pole, 35 KA - 01 Nos (b) Copper Busbar 300 Amp- 01 Set (c) Digital Load manager (voltmeter& ammeter)- 01 Set (d) Neon indicating lamps (R, Y & B) -01` Set of three- 01 Set Outgoing (a) MCCB 4 pole 100 amps, 25 KA -03 Nos (b) MCCB 4 pole 63 amps, 10 KA - 01 Nos (c) MCB 3 pole isolator C63 amps, 10 KA - 04 Nos (d) Automatic street light ON / OFF timer of capacity not less than 16 A, 3 phase, 3 Pole with suitable capacity of contactor, relays , control wiring and all acessories all as specified. - 01 Nos (e) Online Change over 160 A with metal enclosure- 01 Nos

M&L in replacement, for earthing complete with GI earth plate electrode of size 60cm x 60cm x 6.0m m buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers etc and connected to and including galvanized earth strip 25mmx4mm upto 7.5 m by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 32mm dia GI pipe connected to main control board and GI pipe medium grade 20mm bore for watering and including funnel, wire mesh, charcoal,salt etc RCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate) including excavation and earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009 complete all as specified and as directed.

M/s. Chhtrapati Construction(Propa. Lokesh Anant Salunke)

SKS Electricals

Mangesh Murlidhar Darwade

BHAVIN INFRA