Electrification of Multipurpose building at FSTP Site.

Amount

Wiring for light point / fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 10 sq. mm + 1 X 6 sq. mm earth wire

4 X 16 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch

3 pin 5/6 A socket outlet

Bell push

TV antenna socket outlet

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction boxwooden block including connections etc. as required

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 Amps modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way (4 + 18), Double door

8 way (4+24 ), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole 6/16 Amp.

Supply and fixing of following sizes of PVC conduit alongwith accessories in surface/recessed including cutting the wall and making good the same in case of recessed conduit as required. (for telephone, TV, Internet) 25 mm

Supply, installation, testing & commissioning of GI Electrode Earthing with 84mm dia and 3 meter length, with 40mm x 6mm thick the electrode should be hot-dip galvinised. The GI Electrode shall be pre-filled with Cristaline Conductive Materila (CCM). The GI electrode shall be surrounded with BEE MOIST compound to provide maximum contact between the electrode and compound should be eco-friendly GI Electrode Earthing should be maintinance free and does not require regular manual addition of water. The earthing pit should be covered with PVC cover.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Providing and fixing 25 mm X 5 mm G.I. strip on surface or recess for connections etc as required

Supplying and fixing following rating capacity and pole MCCB with thermagmetic release and ermunal spreaders in existing cubical panel board including drilling holes in cubical panel making connections etc as required MCC FP 100 Amp 30 KA.

On load Change over Switch 100 Amp.

Fabrication, supplying, installation testing and commissioning of following pannel made out of 2mm thick M.S sheet, wall mounted, vermin & dust proof, outdoor type with suitable size of angle iron legs fro grounting in the ground, with lockable type hinged doors, duly painted with provision for fixing of 1 no incomer MCCB, 1No outgoing MCCB, MCCB type change over switch 1 no. including supply and fixing 2 sets of Aluminium Bus Bar, and strips for housing MCB's 12 Nos, MF Digital Meter and other allied accessories etc. as required (Make as per annexure).

Supplying and fixing of following rating 240/415 Volt's "C" Series miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning (Above to 32 Amp.) SPN 63 Amp

TPN 63 Amp

Supplying and fixing of 1.1 KV PVC insulated and PVC sheathed XLPE Aluminium Power Cable of following sizes on surface/surface cable tray/0.50 mtr below ground level etc. as required including carriage upto site of work. (Make as per annexure enclosed). 35 sqmm 3.5 core-Armoured

Supplying and fixing of 45 watt LED Street Light complete with GI pipe bracket duly embeded along the parapet/wall. Wipro LR02-501-XXX-57-G1 or equivalent approved make.

Supplying & fixing following luminaries as required 10 watt LED tube light fitting. LL20-111-XXX-65 NE3 wipro or equivalent.make and modal Philips / Crompton Greaves

20 watt LED tube light fitting.Model /make or equivalent make model Philips/Crompton Greaves

Supplying ,installation testing and commissioning of LED 2x2 recess mounted fixture that delivers at least 3000 lumens and wattage not more than 36 watt .The luminaries shall have a CRC a power coated body and high efficiency diffuser .WIPRO CRCO10 RO 38HP57GL or equivalent approved make

Supplying and fixing of Angle /Baten Holder with 9 watt LED Lamp polycarbonate including making complete connections etc as required

Supplying and fixing of following electrical items suitable for operating on 240/230 volts AC, 50 HZ supply, including connection etc,as required .Exhaust fan 300 mm size(Heavy duty CG transair or equivalent approved make

250mm Shutter Type

Supplying and fixing of Musical Bell including making complete connections etc as required .(Make as per annexure)

Supply and fixing LED type down lighter 12 watt

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conuctor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/recessed steel/ PVC conduit as required.