Construction of control room building,providing plinth foundation and other allied civil and electrical works for Establishment of Boomanur 33/11KV SS in METTUR EDC

Amount

Clearing scrub jungles and disposed from the site as per the direction of site engineer including cost of all labour, lead, lift,etc., complete.

Earth work excavation for foundation in hard stiff clay, stiff black cotton hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders with an initial lead, lift, etc., complete.

Earth work excavation for foundation in soft disintegrated rock, laterite soft rock or kankar not requiring blasting with an initial lead of 10 m and lift of 2m etc., complete.

Earthwork excavation in medium rock and dense medium rock not requiring blasting with an initial lead of 10m and lift of 2m etc., complete.

Providing anti termite treatment in 4 stages I) immediate after earth work excavation and before laying foundation concrete II) after refilling for sides of foundation III) Before laying of flooring concrete IV) outside of basement upto 1.0m alround the building using termite 250ml for 5 lit of water etc., complete.

Supplying and filling of river sand in foundation and basement with well water and consolidation as per specification including cost of all materials labour, lead, lift, etc., complete.

PCC 1:3:6 mix using 40mm HBS machine crushed metal for foundation with out form work including cost of all labour ,materials,water charges, lead, lift, curing, etc., complete.

RCC 1:1.5:3 using 12 to 20mm (machine crushed) metal for raft foundation without formwork including cost of all materials,water charges, labour,lead, lift, etc., complete.

RCC 1:1.5:3 using 12 to 20mm (machine crushed) metal for column concrete with formwork including cost of all materials, water charges labour lead, lift, etc., complete. But excluding cost of steel reinforcement (by using mixer machine) -Ground floor

RCC 1:1.5:3 mix using 12 mm to 20mm HBS metal (machine crushed) for Grade beam /plinth beam with formwork including cost of all labour, materials, water charges, lead, lift, etc, complete. But excluding cost of steel reinforcement (by using mixer machine).

RCC 1:1.5:3 mix using 12 to 20mm HBS metal (machine crushed) for continuous lintel with formwork including cost of all materials, water charges ,lead, lift, etc., complete. (by using mixer machine) - Ground Floor

RCC 1:1.5:3 mix using 12 to 20mm HBS metal (machine crushed) for Sun shade 60cm. Projection 80 mm thick at wall end and 50 mm thick at free end and loft, with form work including cost of all materials, water charges , labour, lead, lift, etc., complete. (by using mixer machine) - Ground Floor

RCC 1:1.5:3 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement - For Roof Beam concrete Ground Floor.

RCC 1:1.5:3 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc., complete. But excluding cost of steel reinforcement - For Roof slab concrete 130 mm Tk Ground floor upto 4.5 m height.

RCC 1:1.5:3 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, water charges , lead, lift, etc. complete. But excluding cost of steel reinforcement - For precast cover slab concrete.

Brickwork in CM 1:5 mix using bricks of size 9"x 4 3/8"x2 3/4" for super structure including cost of all materials, water charges , labour, lead, lift, curing, etc., complete by using II class Chamber Burnt bricks - Ground Floor.

Brickwork in CM 1:3 mix using II class chamber brick of size 9"x 4 3/8" x 2 3/4" for bath, fol, brick on edge, partition wall, superstructure including cost of labour materials, curing, lead,water charges, lift, etc., complete.

Fabrication, Transport & fixing of GI angles for cable duct with anchorage and placing in position as directed by the engineer at site including cost of angles,cutting and all labour, lead, lift, etc., Complete.

Refilling with excavated earth other than sand in foundation and sides of masonry, consolidation as per standard specification with water including all, labour, lead, lift, etc., complete.

Supplying and fabricating and placing in position of MS / RTS steel reinforcement for RCC works including labour for cutting, bending, tying and fixing in position as per specification including cost of all materials, lead, lift, labour, cost of binding wire, etc., complete.

Providing projected border of 7.50cm width on top of parapet wall in CM 1:3 mix 12mm thick, including cost of all material labour charges,water charges, lead, lift, curing etc., complete.

Providing projected border of 20cm. width for plinth beam in CM 1:3 20mm thick, including cost of all materials, labour, lead, water charges, lift, etc., complete.

Plastering with CM.1:5 mix using 12mm thick for inside & outside walls, including cost of all materials, water charges, labour, lead, lift, etc, complete.

Plastering with CM. 1:3 mix 12mm thick for ceiling,fol, bath, RCC pillars, sunshade, loft, etc., including cost of materials, labour, water charges, lead, lift, watering, curing, etc., complete.

Finishing the floor with 20mm thick cement concrete using 3 to 10mm stone chippings (Ellis pattern first sort - no sand to be used) including cost of all materials, labour, lead, lift etc., complete.

Providing weathering course with good quality of readymade cooling tiles laying over CM 1:3, and pointed with the same oiled mortor including cost of, cement all materials, curing, labour, lead and lift etc., water charges and including cost of material and labour for applying water proof component over the terrace etc., complete.

Providing PVC down fall pipe using 110mm dia 4 Kg / sqcm, PVC pipe and PVC clamp line supreme etc, including fixing PVC washer type door bend & shoe, in correct position and connecting from the roof slab including cost of all materials, labour, transport lead, lift, etc., complete, including PVC accessories and washers.

Providing and fixing sanitary fitting consisting of Neycer/parryware of Oriya pattern Water Closet 45cm with P/S trap connecting with PVC ventilating shaft and Y bend complete, including cost of all material, labour, lead, lift, etc, complete.

Inner colour washing with two coats using ready mixed Interior Emulsion (First quality - Apex or its equivalent) of approved quality and colour over a coat of Interior emulsion water based primer Interior surfaces with three coats of putty including through scrapping, clean removal of dirt, cost of all materials, scaffolding, Labour, Lead, Lift etc., complete and including necessary crack filling paste, putty wherever required.( Inner surface)

Ceiling colour washing with two coats using ready mixed Emulsion (First quality - Apex or its equivalent) of approved quality and colour over a coat of emulsion water based primer ceiling surfaces including through scrapping, clean removal of dirt, cost of all materials, scaffolding, Labour, Lead, Lift etc., complete. (Ceiling)

Outer colour washing with two coats using ready mixed exterior Emulsion (First quality - Apex or its equivalent) of approved quality and colour over a coat of exterior emulsion water based primer exterior surfaces with two coats of putty including through scrapping, clean removal of dirt, cost of all materials, scaffolding, Labour, Lead, Lift etc., complete and including necessary crack filling paste, putty wherever required. ( Outer surface)

Supplying and fixing of two side polished 20/30mm thick cuddapah slab for cupboard, including cost of all materials, labour, lead, lift, etc., complete.

Collection, supplying, stacking and spreading of red gravel with compacted including cost of all materials lead, lift, labour etc., complete as per the direction of site engineer.

Providing Inspection chamber for sufficient intervals throughout the line 0.45x0.45m Size to a depth as below with proper gradient of the sewerline and BW. in CM 1:5 with CI. cover at top and bottom foundation PCC 1:3:6 using 40mm metal plastering with CM1:3 12mm thick and all lead, water charges,lift etc.,complete. 0.45x0.45m size to a depth of 0.45m.

Supplying and fixing CI.man hole cover of size for inlet and outlet manhole and building outside man hole cover for heavy duty including cost of all materials lead, lifts, labour etc., complete 0.45x0.45m CI Man hole cover.

Supplying and laying PVC pipe 110 mm outer dia 6kg/ cm2 ISI make for laying the sewer line including cost of PVC pipe coupling labour for cutting, laying, fixing, tighting etc., including earth work excavation and refilling trench etc., complete.

Supplying and fixing of 110mm dia slotted PVC pipe for dispersion trench with covering with roof pan tiles for covering the sides partly as per drawing including cost of all materials lead, lift etc. Complete.

Supplying and filling 20mm HBS metal for dispersion trench per standard specification including cost of all materials, lead lift etc. complete.

Supplying and fixing of 100mm dia PVC pipe, cowl for ventilating shaft., to a height of 10' length with proper B.W. with C.M 1:5 mix, plastering 12mm thick including cost of all materials, lead, lift etc., Complete.

Flooring with approved ceramic non-slippery tiles 300x300mm size of approved Quality, design & colour (Johnson or equivalent make) laid in cement mortar 1:3 - 20mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the joints, including cost of all materials, water charges ,labour, lead, lift, etc., complete.

Flooring with approved Vitrified tiles 600x600mm of approved Quality, design & colour (Johnson or equivalent make) laid in cement mortar 1:3 - 20mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the joints, including cost of all materials, water charges,labour, lead, lift, etc., complete.

Dadooing walls with approved quality of glazed tiles, size and design (johnson or equivalent make) laid in cement mortar 1:2 -10mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the joints and pointing flush with the surface , including cost of all materials, water charges labour, lead, lift, etc.,complete.

Flooring with approved acid proof tiles over cement mortor 1:3, 20mm thick in floor including pointing with white cement finishing the joints flush pointing the surface etc., including cost of all materials, water charges labour, lead, lift, etc. complete. ( Battery Room )

Providing UPVC Door and fixing casement doors fabricated from unplasticized polyvinyl chloride (UPVC) sections.The Profile should be three chamber system which provides high insulation properties with outer frame 60mmx55mm with an outer wall thickness of 2.4mm.The window unit should be designed with all corner joint mired and fusion welded.windows should be steel reinforced with 25x24x25mm steel reinforced with thickness of 1mm to have dimensional stability.The sash should be of 602x102mm. The mullion should be of 60x74mm.The profile should have coextruded seals.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.The window should be got approved from the Executive Engineer before use on work cost of all materials , lead, lift , etc. complete, as per standard specification dia PVC 10 kg

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 8mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (blackcolour) covered with all over the edges of frame and shutter.The corners and joints should be welded and cleaned. Radiations pin headed or Pin headed/Fluted/Figured glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.The ventilator should be got approved from the Executive Engineer befoe use on work and as per specications.

Supply and fixing of solid PVC door with frame made out of rigid thermo vinyl polymer extruded section ofsize 62mmx51mm with 2mm wall thickness,shall be reinforced with special polymeric rods of size 255mmx30mmx25mm and with EPDM gaskets along the frame. The door shutter frame of 40mm thickmade out of one piece moulded rigid thermo vinyl polymer extruded sectionof size 25mmx40mm with 2mm wall thickness is mitered and joinedat corners by stainless steel/ aluminium screws. The infill of the door shutter consists of a seamless one piece multi chamber hollow rigid thermo vinyl polymer sectionof size 762mmx35mm with 1mm wall thickness and with prelaminated glossy finish on either side of door shutter of suitable size including cost of all materials lead lift etc., complete.

Supply and fixing of wash basin of size 560x410mm coloured colour and of approved quality and make [Parryware or equivalent] with 12/15mm dia brass CP pillar tap [waterman], 32mm PVC waste pipe [Kohinoor], 12/15mm CP angle cock [ISI], 15mm brass nipple, 15mm nylon connection [Kohinoor] etc. fixing the basine in the wall with GI/Alu. brackets, giving necessary water connection etc., and mirror with beveled edge fixed with suitable CP brass screws etc., complete.

Supplying and fixing in position sun control polyester film, reflective type 75 microns thick, gareware or equivalent including the cost of all materials, labour, lead, lift, T&P etc. Complete.

Supplying and sticking the name stickers in doors identifying the rooms including cost of material, labour etc., complete.

Supplying and fixing of 1000 lit capacity sintex tank of approved quality including cost of materials labour for fixing lead, lifts etc., complete.

Supplying and fixing Digital wall clock -1 No, floor mat- 4 Nos., water bucket with mug in large and small sizes each - 2 sets for Entrance 1000x500 - 2 Nos. for office of approved make and quality including the cost of all materials, leads, lifts etc., complete.

Supplying and laying PVC pipe of 32 mm dia to withstand the pressure of ISI make including cost of PVC pipe coupling labour for cutting, laying, fixing, tighting etc., including earth work excavation and refilling trench etc., complete for earth pit water supply arrangements.

Supplying and laying PVC pipe of 25 mm dia to withstand the pressure of ISI make including cost of PVC pipe coupling labour for cutting, laying, fixing, tighting etc., including earth work excavation and refilling trench etc complete for earth pit water supply arrangements.

Supplying and laying PVC pipe of 20 mm dia to withstand the pressure of ISI make including cost of PVC pipe coupling labour for cutting, laying, fixing, tighting etc., including earth work excavation and refilling trench etc., complete for earth pit water supply arrangements.

Supplying and fixing in position of GM gate valve best quality such as leader, zeolite, zenith including cost of all special fixtures lead, lift,etc., complete - 32 mm dia GM Gate valve.

Supplying and fixing in position of GM gate valve best quality such as leader, zeolite, zenith including cost of all special fixtures lead, lift,etc., complete - 25 mm dia GM Gate valve.

Supplying and fixing in position of GM gate valve best quality such as leader, zeolite, zenith including cost of all special fixtures lead, lift,etc., complete - 20 mm dia GM Gate valve.

Providing PVC door bend 50mm dia including fixing in position cost of all materials, labour, lead, lift, etc., complete.

Supplying and fixing 100 x 50mm PVC floor trap in bath room with one PVC door bend shoe of 50mm dia including cost of all etc., complete.

Supplying and fixing 110mm dia PVC Bend including cost of materials, labour lead, lift, etc., Complete.

Supplying and fixing 110mm dia PVC TEE including cost of materials, labour lead lift, etc. Complete.

Wiring with 2x1.5 sq.mm PVC insulated single core unsheathed copper conductor cable 1100 V grade in suitable PVC rigd pipe on wall and ceiling with reputed make switch boxes earthwire connection in 14 SWG TC wire for light point / Fan point including cost of wire ,labour lead etc. complete of approved quality (For Electronic regulator)

Supply and run of 2 x 1.5 sqmm (22/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour.

Wiring with 2 x 1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3 mm thick hylum sheet cover for 5A 3 Pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC Plug point.

Wiring with 2 x 4 sqmm (56x0.3) PVC insulated single core unsheathed copper cable 1100 v grade in suitable PVC rigd pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150x100x63 mm TW Swich box with 3mm thick hylem sheet for 15 A 3 PIN non interlocking CS plug with continuous earth wire 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed power plug point.

Supply and fixing of 3 phase 4 wire 4 way ICDB of 16A per way with 32 A TPN MC switch with suitable MS cable entry boxes trunking box and internal connections on suitable angle iron frame work etc., Complete with PWD earthing.

Supply and fixing of 32 A TPNMC switch on suitable angle iron frame work with MS cable entry box with earth connection only.

Supply and fixing of 20W LED 3000K flu.type fitting complete on wall/ceiling with tubes and PVC unsheathed Copper leads from terminal to the fitting.

Supply and fixing of 4'28 W Twin type Mirror optic suspension type fitting (Philips /Crompton / Wipro) complete with louvers cover complete with copper chokes and condensor with conduit pipe suspension, with PVC unsheathed copper leads from the terminals to the fittings with flu. tubes.

Supply and fixing of W.T bulk head fitting (Philips / Bajaj / K.Lite / Crompton Greaves) suitable for 9 W LED bulb with guard

Supply and fixing of fancy glass shade and 9 W LED bulb for BH point.

Supply and fixing of 1400 mm (56") AC ceiling fan complete with stepped electronic 300 W regulator with 1.0m down rod including fan clamp with side plates and cross arm of size 450 mm.

Supply and fixing of 450 mm (18") sweep (heavy duty) AC exhaust fan complete with necessary wall opening and making good of the wall.

Supply and fixing of 20 Amps DP plug and socket in sheet enclosure with 32 A DP MCB in flush with wall with earth connection (For AC plug) [Legrand (MDS) / Hager (L&T) make].

supply and fixing of Horizontal type 4 way pole neutral MCB distribution board in sheet steel enclosure with 40A 4 pole MCB isolater as incoming and 12 Nos. 6 A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection.(The MCBDB and MCB's should be with ISI mark)

Earthing as per PWD standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32 mm complete with necessary masonry work.

Supplying and laying of 4 core 16 Sqmm copper PVC armoured LTUG cable including cost of cable, lead, lift, labour charge, etc., complete.

Supplying and fixing of 4 pole 32 Amps Isolator 1 No with MCB box 4 pole including terminal block for testing purpose at relay and CC room, cost of all materials, lead, lift, labour charge, etc., complete.

Drilling of 150 mm dia borewell from GL in all classification of soils including hard rocks using Power RIG/Hamer RIG, charges for transporting the power Rig to site, operation charges all lead, lifts , labour, etc, complete.

Supplying and fixing 165 mm dia PVC casing pipe of superior quality of 6 Kg / Sqcm with sheel thickness of 8mm, including fixing and transporting to the site and cost of PVC casing pipe, labour, lead, lifts, etc., complete.

Supplying and fixing 165 mm dia PVC slotted pipe of superior quality of 6 Kg / Sqcm with sheel thickness of 8mm, including fixing and transporting to the site and cost of PVC slotted pipe, labour, lead, lifts, cost of pebbles and backing of pebbles as per instruction of site engineer etc., complete.

Supplying and fixing of 50 mm dia outer HDPE Hose fine tee, flow tee of ISI make with connecting specials for suction including cost of all materials, labour, lead, lifts, etc., complete.

Supplying and fixing of 25 mm dia outer HDPE Hose fine tee, flow tee of ISI make with all connecting specials for air pipe including cost of all materials, labour, lead, lifts, etc., complete.

Supplying and fixing and erection of 50 mm dia GI pipe 'B' Class in suction and delivery pipe from the Bore including cost of pipe coupling,bend, labour for cutting, threading & fixing wherever necessary.

Provision of conducting Geological survey for bore well by the Government agencies including transport,labour etc., complete.

S&F of 3 phase 2HP Submersible pump with accessories of approved make of Texmo or ELG Including cost of all materials,labour, transport,lead,lift etc with mounting platform & foot valve arrangement and 3 phase 15 Amphs L& T starter arragements etc., complete.

Supplying and fixing in position of best quality mirror with standard size near wash basin including cost of all materials labour, lead, lift, etc. complete as directed by the engineer at site.

Supply of furnitures manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. (S Type chair with nylon seated)

Supply of furnitures manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. (Steel side rack open type)

Supply of furnitures manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. (Steel half bench)

Supply of furnitures manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. (Steel stool)

Supply of furnitures manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. (SC table)

Supply of furnitures manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. (PVC armed Chair of reputed make)

Collection, supplying, stacking and spreading of hill earth with compacted by power roller including cost of all materials lead lift labour etc., complete as per the direction of site engineer.

PCC 1:5:10 using 20mm graded hard machine broken granite stone with steel mould, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Road base concrete.

RCC 1:1.5:3 using 12-20mm graded hard machine broken granite stone with steel mould, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement - For Road concrete.

RCC 1:1.5:3 using 12 - 20mm HBG metal for cable duct wall with form work including cost of all materials, form work including cost of all materials, labour, lead, lift, etc. complete.(But excluding cost of steel reinforcement)

Random rubble masonry in C.M.1:6 for foundation and basement including cost of all materials, lead, lifts, labour and curing charges etc., complete cost of all materials, lead, lift, labour, cost of binding wire, etc., complete.

Supply and fixing of 90lbs rails in transformer plinth including cost of material and fixing charges etc complete.

Cement Solid Block in CM 1:5 using 15 cm cement Solid block for super structure and man hole including cost of all materials, labour charges, curing,scaffolding charges all leads and lifts etc., complete and as directed by Engineer.

PCC 1:2:4, using 20mm HBG metal foundation without form work including cost of cement, all materials, labour, lead, lift, etc. complete.

PCC 1:2:4, using 20mm HBG metal foundation with form work including cost of cement, all materials, labour, lead, lift, etc. complete.

Labour charges for transporting from casting yard to curing tank,curing tank to cable duct , aligning and laying of RCC pre cast slab as directed by the site engineer including all labour lead lifts etc., complete.

Supply and spreading of quarry dust inside the yard as per standard specification including cost of materials ,labour lead,lift etc., complete.

Supply and spreading of 20mm of HB stone inside the yard as per standard specification including cost of materials ,labour lead,lift etc., complete.

Supply and Filling with gravel for Berms including cost and conveyance of gravel to worksite, laying, handling charges and filling in layers, necessary consolidation and all other incidental charges etc., complete.

Providing expansion joint for road concrete as per specification in both direction using prevalid asphaltics film with 8 to 10 mm thick to full width and depth of 100mm thick including cost of cutting, cleaning of excess bitumen surface , all materials, labour, curing, all leads, and lifts, etc., complete as per standard specification.

Supplying and laying 50 mm Dia GI pipe 15kg/ cm2 ISI make including cost of GI pipe coupling labour for cutting laying fixing tighting etc including earth work excavation and refilling trench etc., complete.

Supplying and fixing of PVC end cap of 20mm size of approved quality cost of all materials, labour for laying and making holes, lead, lift, etc., complete for water supply arrangements to earth pit.

Supplying and fixing in position of MS grill gate including cost of all materials lead, lift, etc. as per type design drawing with proper locking arrangements as directed by the engineer at site including cost of painting with two coats of enamel paint over with one coat of red oxide.

Painting with two coats of approved enamel paint over one coat of primer for all M.S door window ,gater etc., including cost of all materials,labour,lead and lift etc., Complete as per instructions of site Engineer.

Labour charges for assembling of various plinth template for providing concrete, including transporting from one plinth to another aligning fixing to correct level and dismantling the template after concrete, including cost of Labour lead, lift, etc., complete as per standard specification.

Supplying and Fabrication of 20mm dia sizes of M.S grouting bolt including cutting, bending, threading 100 mm length including galvanizaion and providing 2 nos. nuts with washer etc and fixing them in plinth including cost of material, Labour lead, lift, etc., complete, as per standard specification.

Colour washing two coats with interior emusion paint over one coat of white cement primer for outside wall including cost of all materials, labour, lead, lift, etc., complete. - Plinth

Supply of Iron & steel items as per relevent IS of various required lengths for Structures and other purposes as directed by the Field Engineer. - RS Joist 250X125mm

Supply of Iron & steel items as per relevent IS of various required lengths for Structures and other purposes as directed by the Field Engineer. - RS Joist 200X100mm

Supply of Iron & steel items as per relevent IS of various required lengths for Structures and other purposes as directed by the Field Engineer. - MS CHANNEL 125X65mm

Supply of Iron & steel items as per relevent IS of various required lengths for Structures and other purposes as directed by the Field Engineer. - MS CHANNEL 100X50mm

Supply of Iron & steel items as per relevent IS of various required lengths for Structures and other purposes as directed by the Field Engineer. - MS ANGLE 100x100x8mm

Supply of Iron & steel items as per relevent IS of various required lengths for Structures and other purposes as directed by the Field Engineer. - MS ANGLE 50X50X6mm

Supply of Iron & steel items as per relevent IS of various required lengths for Structures and other purposes as directed by the Field Engineer. - MS FLAT 65X10 (Eathmat only)

Supply of Iron & steel items as per relevent IS of various required lengths for Structures and other purposes as directed by the Field Engineer. - MS FLAT 50X8 ( Including L.section)

Supply of Iron & steel items as per relevent IS of various required lengths for Structures and other purposes as directed by the Field Engineer. - MS ROD 40mm (Including Earth spike)

Supply of Iron & steel items as per relevent IS of various required lengths for Structures and other purposes as directed by the Field Engineer. - MS/RTS ROD 20mm (Including I-bolt)

Supply of Iron & steel items as per relevent IS of various required lengths for Structures and other purposes as directed by the Field Engineer. - Chequered plate 6mm

Supply of POWER CONNECTORS - 4 Bolt Tension fitting for Zebra

Supply of POWER CONNECTORS - " T " Clamp for Zebra to Zebra

Supply of POWER CONNECTORS - " T " Clamp for Zebra to 2" Busbar

Supply of POWER CONNECTORS - Switch end clamp for Zebra

Supply of POWER CONNECTORS - Switch end clamp for Mink

Supply of POWER CONNECTORS - Switch end clamp for 2" Bus Bar

Supply of POWER CONNECTORS - PG Clamp for Zebra

Supply of POWER CONNECTORS - Free end Clamp for 2" Bus Bar

Supply of POWER CONNECTORS - Corona Bell for 2" Bus Bar

Supply of POWER CONNECTORS - L clamp for Zebra

Supply of POWER CONNECTORS - Reducer clamp for 2" busbar

Supply of YARD LIGHT poles - 5.5 Mtr long stepped tubular pole for yard light

Supply of YARD LIGHT pole and fitting - 72 Watts LED lamp with street light fitting

Supply and fixing of Rubber mat of size 2000X1000X10 mm.

Supply and fixing of FIRE FIGHTING EQUIPMENTS - Foam type - 9 litre

Supply and fixing of FIRE FIGHTING EQUIPMENTS - DCP type - 25 litre (Trolley mounted)

Supply and fixing of FIRE FIGHTING EQUIPMENTS - DCP type - 10 kgs.

Supply and fixing of FIRE FIGHTING EQUIPMENTS - DCP type - 5 kgs.

Supply and fixing of FIRE FIGHTING EQUIPMENTS - Fire bucket.

Supply and provision of 600 mm mean dia 300 mm height, 36mm thick cement collar for identification of earth electrode location including 1 primer and 2 coats of colour wash as directed by the field engineer

Supply,fabrication and fitting of CT / PT Junction box of size 400 W X 150 D X 300 H made out of 14 SWG (2mm) M.S. Sheet with 16 Nos. termination of stand type with two nuts and washers suitable for 4 Sqmm copper cable and 5 Nos. 1" gland wherever required as directed by the field engineer. The box shall be vermin proof shall have sturdy hinges, provision for mounting terminal blocks and locking arrangements.

Supply and provision of M5,M10,M12 & M16 (full thread ) G.I. Bolt and Nuts of various length for erection of AB Switch and Insulators and any other purpose wherever necessary and as required and as directed by field Engineer

Supply and fixing of disconnected type terminal block suitable for C.T circuits in panel / box as required and as directed by field engineer

Supply and fixing of mounting channel suitable for CBTM 5 terminal block in Panel / Box as required and directed by the field Engineer.

Supply and glanding of ISI mark cable gland of suitable size of reputed make including removing of insulation of cable and providing suitable holes as required and as directed by the field engineer - 19 mm

Supply and glanding of ISI mark cable gland of suitable size of reputed make including removing of insulation of cable and providing suitable holes as required and as directed by the field engineer - 25 mm

Supply and glanding of ISI mark cable gland of suitable size of reputed make including removing of insulation of cable and providing suitable holes as required and as directed by the field engineer - 28 mm

Supply and fixing of Godrej 6 lever navtol lock with triplicate keys for AB Switch and for any other purpose including the cost of ring and key token as directed by the field engineer

Supply and provision of 12 / 25 X 3 mm flexible braided copper for electrical connection including the cost of suitable copper lugs for crimping of at both ends etc.as directed by field Engineer.

Supply and fabrication of sand drum made out of oil drum of size 580 mm dia and 420 mm height with conical cover made out of tin sheet provided with handle including cost of barrel, sand and consumables as directed by the field Engineer.

Fabrication, supply and mounting of main equipment board 2500 X 1500 mm out of 14 SWG M.S Sheet

Manufacturing and supply & fixing of LC/Key board of size 1200x90x150 mm (Inner side) made out of teak wood with 75x 25 mm Alu. frame embedded with 12 mm pre laminated wood particle board using screw on rear 2 Nos plain glass of 5 mm thick fixed with metal roller moving on Alu.channel should be provided on front with locking arrangements.LG glass piece should be fastened on the glass shutters for opening and closing wall clamp made out of 6mm plate should be provided on as per drawing and as directed by the field Engineer including cost of all materials.

Labour charges for drawing layout and writing details in LC / Keyboard including cost of enamel paint (Dules, Asian, Berger preferred) and other consumables as directed by the field Engineer.

Supply and erection of B-class GI pipe for extension of tandom / down pipe for AB switches and for any other work as required by and as directed by field Engineer including cost of GI Pipe of 40 mm dia.

Supply & fixing of ISI mark bakelite HRC/ rewireable fuse holder in panels/ boxes for AC/DC/PT circuits wherever required as directed by the field Engineer. - 16 Amps.

Supply & fixing of ISI mark bakelite HRC/ rewireable fuse holder in panels/ boxes for AC/DC/PT circuits wherever required as directed by the field Engineer. - 32 Amps.

Supply & fixing of ISI mark bakelite HRC/ rewireable fuse holder in panels/ boxes for AC/DC/PT circuits wherever required as directed by the field Engineer. - 63 Amps.

Supply and fixing of ISI mark HRC Fuse without holder of reputed make in panels / boxes for AC/DC/PT circuits wherever required as directed by field engineer - 2/5/10Amps

Supply and fixing of ISI mark HRC Fuse without holder of reputed make in panels / boxes for AC/DC/PT circuits wherever required as directed by field engineer - 32Amps

Supply and fixing of ISI mark HRC Fuse without holder of reputed make in panels / boxes for AC/DC/PT circuits wherever required as directed by field engineer - 63Amps

Supply and fixing of wooden board 25mm/Hylam sheet 10mm thick for fixing fuse units wherever required as directed by the field Engineer.

Supply & fixing of ISI mark porcelain rewirable fuse unit of reputed make in panels, boxes for AC Circuits wherever required as directed by the Field Engineer - 200 Amps

Fabrication supply and fixing of AC distribution box of size 750 W x 250 D / 750 H mm made out of 14 SWG (2mm) M.S. sheet wherever necessary as directed by the field Engineer. The box shall be vermin proof shall have sturdy hinges, provision for mounting MCB and MCCB detachable gland plate and locking arrangements including cost of all materials

Fabrication, Supply and mounting of yard light box of size 200 W X 200 H X 150 D mm out of 18 SWG (1.2mm) M.S Sheet with cable entry holes, fixing arrangements for fuse units and mounting clamps with 1 no. 5 amps porceline rewirable carrier as directed by the field Engineer including cost of all materials

Supply of 3 1/2 sq.mm armoured aluminium cable.

Supply of 2 x 16 sq.mm mutistrand copper cable.

Transporting of Iron & Steel items from various steel yard at chennai (400 Kms) including loading and unloading charges.

Labour, Machineries, consumables for Fabrication of Heavy section without Lengthwise welded joints (Sectional weight 14 Kg/Mtr and above)

Labour, Machineries, consumables for Fabrication of Heavy section with Lengthwise welded joints (Sectional weight 14 Kg/Mtr and above)

Labour, Machineries, consumables for Fabrication of Light section (Sectional weight below 14 Kg/Mtr)

Labour for Erection of Structure Heavy section (Sectional weight 14 Kg/Mtr and above)

Labour for Erection of Structure Light section (Sectional weight below 14 Kg/Mtr)

Labour for rust removing,cleaning painting of first primer coat (Red-oxide) of all sections including cost of paint , brush & consumables.

Labour for rust removing,cleaning painting (Aluminium) of first finishing coat of all sections including cost of paint , brush & consumables.

Labour for painting (Aluminium) of second finishing coat of all sections including cost of paint , brush & consumables.

Labour for erection of 33/22/11 KV Measurement Transformer using manual labour or crane own arrangement (one S Ph or 3 Ph unit) including providing holes wherever required as directed by the field engineer.

Labour for erection of CT/PT junction box including fabrication of clamp.

Labour for Erection of 33/22/11 KV breaker with own crane arrangement and connecting link rod, SF6 gas filling and other consumables including support poles cutting, jointing, providing holes and bending of pipes where ever required and as directed by the field engineer

Labour for erection of 11KV/33KV AB switches including the cost of consumables, lubricant, wiring and alignment, checking of operation and commissioning and as directed by the field engineer.

Labour for erection of LAS Station type single pole stack 33 KV /11KV including fabrication of base if required

Labour for erection of LAS Distribution type single pole stack 33/11KV including fabrication of base if necessary

Labour for erection of Insulators single pole stack 22/11 KV

Labour for erection of strung bus of 11/33KV Single Zebra Conductor (1 span=3 runs) including hoisting of insulator

Labour for erection of Busbar including fabrication and any modification of end clamp wherever necessary and as directed by the field engineer. Using 50mm Aluminium tube bus bar of length (without making bends)

Labour for erection of droppers and jumpers including fabrication and any modification of end clamps wherever necessary and as directed by the field engineer.

Erection of Simplex Panel including alignment and earthing as directed by field engineer

Labour for laying of cable in duct/trench including the cost of Alu.tag for identification. - a) Upto 8 core

Labour for laying of cable in duct/trench including the cost of Alu.tag for identification. - b) above 8 core

Labour for erection of cable and clamping in structures including fabrication of clamps and fixing at uniform intervals as directed by field Engineer - Upto 8 core

Labour for erection of yard light pole including laying of cable inside the pole

Labour for erection of LED lamp 72 W fitting with fixture and fuse box including wiring and testing for burning condition including the cost of 15 amps 2way strip connector and other consumables

Labour for loading or unloading of fragile materials using board's crane

Labour for loading or unloading non fragile materials using board's crane

Labour charges for removing rust, primer coat, first & second coat painting both sides & in M.S.board RS Joist & yard light pole etc., including cost of enamel paint (Dulex,Asian, Berger preferred) and other consumables directed by the field Engineer.

Supply and Labour charges for fabrication of bolt of required length out of 16 to 25 mm dia G I rod including the cost of GI rod and 2 Nos. G I Nuts & washer as directed by field Engineer

Supply and termination of cable core end including cost of cable socket ,lug, ferrules,strap etc,as per cable schedule and as directed by the field Engineer .

Labour charges for writing details in any finished surface including cost of enamel paint

Labour charges for second finish coat for substation structures and panels and wherever required including the cost of paint and other consumables (enamel paint)

Labour machineries, consumables for fabrication of earth electrode 10mtr / 6 mtr length or as directed by the field Engineer

Labour machineries, consumables for fabrication & erection of earth spikes

Labour machineries and consumables for erection of earthmat & earth raisers as directed by the field Engineer at site

Providing 140/150mm dia bore including labour, lead, lift etc., including mobilization in all types of soil and erection of earth electrode, supply and providing A4 Grade bentonite powder with 5% common salt mixed with available site clay soil with water 5Kg/meter depth in earth bore and pouring water and tightening of earth bore, upto satisfactory earth resistance value, and as directed by the field Engineer and supply of identification board of size 300x250 mm out of 14 SWG MS sheet and lettering and 12 mm M.S. round rod to be fixed to the board.

Labour for excavation and refilling of soil for earth mat.

Labour charges for painting of earth raisers by green enamel paint and wherever required including cost of enamel paint (Dulex, Asian, Berger preferred) and other consumables as directed by the field Engineer.

Labour for erection of battery including assembly of wooden stand, painting of acid proof paint for 110V, 120 AH

Labour, tools for charging of battery of 110V DC 120AH

Labour for erection of HG fuse 3 pole set 11KV

Labour for erection of station transformer without using boards crane

GST for bidders within TamilNadu

GST for bidders outside TamilNadu (IGST)

M s Kumaresan and co

C.PERIYASAMY

MSS CONTRACTORS

A.H.CONSTRUCTIONS

JERALIN JERISH

K DHINAKARAN