Providing and fixing of 5A and 15A power points net points light and fan fittings etc at WL 305C and D Ceramic Lab SE PESUDO telephone exchange CL205C and different labs and offices in academic area on complaint basis

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group C

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

3 x 1.5 sq. mm

3 x 2.5 sq. mm

3 x 4 sq. mm

3 x 6 sq. mm

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.

5/6 amps switch

15/16 A switch

6 pin 15/16 A socket outlet

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.

lor 2 Module

3 Module

6 Module

12 Module

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/lsolator)

6 way, Double door

Supplying and fixing following rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole 5 A to 32 A

Double pole 5 A to 32 A

Triple pole 5 A to 32 A

Triple pole and neutral 5 A to 32 A

Double Pole (40A-63A)

Supply fixing connecting & commissioning of following rating ISI marked 3 pin Plug top Anchor make as reqd complete.

Supply and drawing PVC insulated 4 core round copper conductor cable of following size for connection of equipment / exhaust fan etc as reqd.

S & F following size of steel flexible pipe alongwith the accessories on surface etc as required

Supply and fixing of 32 x 20 mm DLP mini- trunking white-system with independent cover etc. as required complete.

Supply and fixing of 105 x 50 mm DLP trunking white-system but without cover and partion etc. as required complete.

Supply and fixing of following accessories suitable for 105 mm x 50 mm size plastic trunking white system.

85 mm flexible cover

End cap

flat angles

separation partitions

Joints for 85mm width cover

base joints

Supplying, installation of Clip-on frame with finishing plate for 85mm cover for DLP plastic trunking 105mm x 50mm etc. as reqd.

2 module

3 module

6 module

Laying UTP cable enhanced cat 5/cat 6 cable in existing steel conduit pipe/GI pipe/ raceway / RCC pipe as reqd. the cost shall also include numbering of networking wire from room to rack as reqd. (wire will be supplied by dept)

Fixing of RJ-45 modular box with cover plate or I/o box for internet on surface/ recessed cutting the wall making good the same as required. ( box and cover plate will be supplied by dept.)

Locating fault in wiring rectifying removing & restoring supply the same & making good the damages etc as reqd.

Dismantling, disconnecting old damaged unserviceable fl fitting/ exhaust fan/ ceiling fan/ bulkhead fitting with bracket etc. as reqd. and depositing in sectional store.

Dismantling the old conduit pipe/wood batten of all sizes from surface/recessed & making good the damages I/c filling the holes of the surface etc as reqd.and depositing it in sectional store.

Fixing 20/25/32 mm conduit pipe/ DLP on surface with clamp/in recessed only conduit pipe supplied by department.(Free of cost)

Dismantling and refixing of M.S./PVC box of up to 250 x 300 x100 on surface recessed as required. including painting with enamel paint as reqd

Providing connection for motor/ panel starter/ transformer upto 1 Kva / steblizer.

Supplying and fixing following size/ modules, plastic box for modular switches in recess etc as required.

1 or 2 Module

3 Module

6 Module

12 Module

S & F metal enclosure suitable for DP/TPN MCB / DP ELCB on surface or recessed etc as reqd.

Supply, installation, testing and commissioning of following LED lamp in existing fitting as required complete.

20 watt ESENTIAL PHILIPS or equivalent Tube inplace of 36/40 W FL tube

18 watt. LED PLL lamp

Supply and fixing of following LED light fixture with efficiency >100 lumen/ watt, P.F. >0.95, THD<10%, Electronic driver, LED lamp, reflector, diffusser, MS body/housing holder etc. complete with all fixing accessories and lamp as required complete.

1 X 20W Box type LED tube with fitting

12 watt resess mounting LED light fixture

18 watt recess 300 x 300 mm mounting LED light fixture

36 watt recess mounting LED light fixture 600 x 600 mm

36 watt recess mounting LED light fixture 300 x 1200 mm

Supplying and fixing exhaust fan shutter for following sizes exhaust fan on rag bolts as reqd complete.

for 300 mm / 12" sweep

Supply, Installation testing and commissioning of following seep, copper wound, 900 RPM, 220 volt AC, 50 Hz exhaust fan in the existing opening etc as required complete.

300 mm / 12" sweep

450 mm / 18" sweep

Supply and installation of 400mm sweep AC 230/250 volts, 50 Hz wall mounting revolving fan with brackets etc complete.

Supplying and fixing connecting and commissioning of AC 230/250 volts, 50 HZ, 250 mm sweep fresh air fan including providing nuts, bolts, mounting frame and other accessories etc. complete

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

RJ 11 Telephone socket

Siddhartha Constructions

Krishna Electricals