Loading…
Loading…
Tender Value
₹51.2 L
EMD Value
₹1.0 L
Closing Date
29 Dec 2025, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
SR.DEN W
15 conditions · 4 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V = Advertised value of the tender in crores of Rupees N = Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:(i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or(ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or(iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender.(b) (1)In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:(i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or(ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or(iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender.Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components.(b) (2)In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity.(b)(3)To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contract or through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing
However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract, with prior approval of Chief Engineer in writing. Note for Item 10.1: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Definition Of Similar Work : - CONSTRUCTION OF BUILDING / QUARTERS WORK" (Note: Zone works for repair maintenance of Service Building / Residential Quarters will not be considered similar work as Construction of Building/Quarters work.)
14 conditions · 3 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
It shall not be obligatory on the said authority to accept the lowest tender and no tenderer/tenderers shall demand any explanation for the cause of rejection of his/their tender.
If the tenderers deliberately gives/give wrong information in his/their tender or creates/create circumstances for the acceptance of his/their tender, the Railway reserves the right to reject such tender at any stage.
If the tenderer/s expires after the submission of his/their tender or after the acceptance of his tender, the Rly. shall deem such tender as cancelled. If a partner of a firm expires after the submission of their tender or after the acceptance of their tender, the Railway shall deem such tender as cancelled unless the firm retains its character.
The Bid Security should be paid through online payment. In case the tenderer withdraw his offer within the validity period of his offer or fails to undertake the contract after acceptance of his tender the full Bid Security shall be forfeited. If the tender is accepted the amount of Bid Security will be retained and adjusted as security deposit for the due and faithful fulfillment of the contract. The Bid Security of the unsuccessful tenderers shall save as here-in-before provided be returned to the unsuccessful tenderers within a reasonable time but the Railway shall not be responsible for any loss or depreciation that my happen to the security for the due performance of the stipulation to keep the offer open for the period specified in the tender documents or to the Bid Security while in their possession nor be liable to pay interest thereon.
The tenderers shall keep the offer open for a minimum period as mentioned in NIT from the date of opening of the tender, within which period the tenderers can not withdraw their offer, subject to the period being extended further if required, by mutual agreement from time to time. Any intervention of the above condition will make the tenderer liable for forfeiture of his security deposit for due performance of the foregoing stipulation.
If it is not mentioned in the submitted tender that tender is being submitted on behalf of a Sole Proprietorship firm / Partnership firm / Joint Venture / Registered Company etc., then the tender shall be treated as having been submitted by the individual who has signed the tender. The tenderer whether sole proprietor / a company or a partnership firm / registered society / registered trust / HUF / LLP etc. if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/Contract up to the stage of signing the agreement except in the case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association / Board resolution, failing which tender shall be summarily rejected. A separate power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he / they be partner(s) of the firm or any other person, shall be submitted after award of work, specifically authorizing him / them to deal with all other contractual activities subsequent to signing of agreement, if required. NOTE : A Power of Attorney executed and issued overseas, the document will also have to be legalized by the Indian Embassy and notarized in the jurisdiction where the Power of Attorney is being issued. However, the Power of Attorney provided by Bidders from countries that have signed and Hague Legislation Convention 1961 are not required to be legalized by the Indian Embassy if nt carries a conforming Apostille certificate.
Non-compliance with any of the conditions set forth therein above is liable to result in the tender being rejected.
The quantities shown in above Schedule are approximate and are as a guide to give the tenderer(s) an idea of quantum of work involved. The Railway reserves the right to increase/decrease and/or delete or include any of the quantities given above and no extra rate will be allowed on this account.
Construction of OFC Rooms at 11 Stations (SRPJ, BMN, KWI, MXO, SIM, SZA, IQG, JTY, CTT, KRJD, MAA) balance works.
156-2025~NWR
156-2025
Open
Works - General
6 Months
Ajmer, Rajasthan
₹0
₹1.0 L
29 Dec 2025
4 Dec 2025
15 Dec 2025
37 items across 1 schedule · ₹82,55,286.72 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil. | cum 473.36 | — | 286.85 | 1,35,783.32 |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | cum 220 | — | 253.95 | 55,869 |
| 3 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | cum 44 | — | 2,161.2 | 95,092.8 |
| 4 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources: 6 graded stone aggregate 40 mm nominal size derived from natural sources) | cum 36.88 | — | 6,670.25 | 2,45,998.82 |
| 5 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources). | Sqm 79.2 | — | 452.25 | 35,818.2 |
| 6 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. | Per bag 33 of cement of 50kg | — | 57.15 | 1,885.95 |
| 7 | Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil. | Sqm 79.2 | — | 113.85 | 9,016.92 |
| 8 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand(Zone- III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. | Sqm 242 | — | 681.65 | 1,64,959.3 |
| 9 | cum 1.98 | — | 10,719.3 | 21,224.21 | |
| 10 | Suspended floors, roofs, landings, balconies and access platform | Sqm 275 | — | 766.55 | 2,10,801.25 |
| 11 | Lintels, beams, plinth beams, girders, bressumers and cantilevers | Sqm 200.54 | — | 608.35 | 1,21,998.51 |
| 12 | Thermo-Mechanically Treated bars of grade Fe- 500D or more. | Kg 2119.83 | — | 89.65 | 1,90,042.76 |
| 13 | Thermo-Mechanically Treated bars of grade Fe- 500D or more. | Kg 7425 | — | 89.65 | 6,65,651.25 |
| 14 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum 33 | — | 8,683.8 | 2,86,565.4 |
| 15 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum 71.5 | — | 10,306.2 | 7,36,893.3 |
| 16 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum 135.2 | — | 8,288.35 | 11,20,584.92 |
| 17 | Above plinth level upto floor V level | cum 107.43 | — | 8,565.95 | 9,20,240.01 |
| 18 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum 91.98 | — | 6,653.45 | 6,11,984.33 |
| 19 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum 150 | — | 8,275.7 | 12,41,355 |
| 20 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm 44 | — | 1,881.95 | 82,805.8 |
| 21 | 300x16 mm | Each 11 | — | 260.3 | 2,863.3 |
| 22 | 250x10 mm | Each 22 | — | 104.4 | 2,296.8 |
| 23 | 125 mm | Each 22 | — | 60.05 | 1,321.1 |
| 24 | Twin rubber stopper | Each 11 | — | 62.25 | 684.75 |
| 25 | Fixing with adjustable lugs with split end tail to each jamb | Metre 66 | — | 471.25 | 31,102.5 |
| 26 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | Kg 330 | — | 142.3 | 46,959 |
| 27 | 40 mm thick with 20 mm nominal size stone aggregate | Sqm 198 | — | 545 | 1,07,910 |
| 28 | Size of Tile 600 x 600 mm | Sqm 231 | — | 1,311.05 | 3,02,852.55 |
| 29 | 1:4 (1 cement: 4 fine sand) | Sqm 350 | — | 294.85 | 1,03,197.5 |
| 30 | 1:6 (1 cement: 6 fine sand) | Sqm 300 | — | 382.1 | 1,14,630 |
| 31 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | Sqm 770 | — | 214.3 | 1,65,011 |
| 32 | New work (two or more coats) over and including water thinnable priming coat with cement primer | Sqm 770 | — | 162.55 | 1,25,163.5 |
| 33 | Two or more coats on new work | Sqm 22 | — | 131.45 | 2,891.9 |
| 34 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | cum 26.01 | — | 2,007.1 | 52,204.67 |
| 35 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | Kg 220 | — | 433.95 | 95,469 |
| 36 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | Kg 220 | — | 531.8 | 1,16,996 |
| 37 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) | Sqm 22 | — | 1,325.55 | 29,162.1 |
| Schedule total | ₹82,55,286.72 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .