REPAIRS AND CLEANING OF SEWAGE LINE, MANHOLES, SEPTIC TANK AND REPAIRS TO STORM DRAIN, FENCING PATHS, HARDSTANDING UNDER AGE BRI AT INS SHIVAJI LONAVLA

Amount

Excavation in trenches n.exc 1.5m wide n.exc 1.5m deep for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 Sqm on plan and n.exc 1.5m depth and getting out in soft/loose soil

Excavating in trenches, exc 1.5m and n exc 3 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. and getting out in soft/loose soil

Returning, filling including spreading levelling, watering and well ramming in layers n.exc 25 cm using soils levelling, watering and well ramming in layers n.exc 25 cm using soils

Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point.

Demolition of cement concrete in ground floor n.exc 15cm thickness (below or above ground level)

Demolition of Reinforced Concrete n exc 15 cm thickness (below or above ground level)

Dismanting cast iron work of any description

Demolition of Brickwork or stone masonry, built in cement mortar In CM including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

Dismantling Cast iron or reinforcement concrete drain pipe joint in cement mortar and taking out of trenches 150 mm dia

Dismantling Cast iron or reinforcement concrete drain pipe joint in cement mortar and taking out of trenches 200 mm dia

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Dismantling fencing wire mesh, any type

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing downw ith water, etc.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete.

M&L for Brickwork with sub class B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 in narrow widths including Cutting out bricks/stone, forming toothing for, and bonding new into old brickwork /stone masonry

M&L for Walling of random rubble, uncoursed built in CM 1:6 complete all as specified

All as per item No.16 but except stone

Hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc 20mm over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses complete all as specified

M & L for rendering 20mm thick cement plaster (1:6) on stone masonary surfaces complete all as specified

M&L rendering 15mm thick in CM 1:6 on fair face of brick/concrete surfaces finished even and smooth without using extra cement

M&L rendering 15mm thick in CM (1:4) on fair face of brick/concrete surfaces on (internal surface of manhole) and finished even and smooth without using extra cement complete with WPC ( wpc measured and paid seperately)

Supply only Water proofing compound

M&L for PCC 1:2:4 type B1,(using 20mm graded stone aggregate) in surface channel and drains (benching of Man holes).

M&L PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping of manhole including weathering, slightly rounded or chamfered angles and throating including necessary form work .

M&L for Pre-cast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in manholes cover slabs with plain fair faces including necessary form work (Reinforcement shall be measured & paid separately).

M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in foundation filling and mass concrete.

S&F Cast iron work grade FG 150, unmachineed, in brackets, gully traps, gratings, railings, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles exc 5 kg each

S&F Mild steel TMT bars 10mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to

M&L for Concrete bed to drain pipes including forming cradles in PCC (1:4:8) type D2 (using 40 mm gradded stone aggregate) for 150 mm dia pipe complete all as specified and as directed

M&L for Concrete bed to drain pipes including forming cradles in PCC (1:4:8) type D2 (using 40 mm gradded stone aggregate) for 200 mm dia pipe complete all as specified and as directed

S&F Reinforced concrete pipes, class NP2, laid and jointed complete with collars 150 mm dia laid in trenches and jointed as specified

S&F Reinforced concrete pipes, class NP2, laid and jointed complete with collars 200 mm dia laid in trenches and jointed as specified

M&L 100mm thick plain cement concrete 1:2:4 type B2 (using 40mm aggregate) as in hardstanding finishing even and smooth without using extra cement including brooming finishes.

M&L for Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ for slab thicknes 150 mm

M&L cement concrete 1;4:8 type D2 (40mm aggregate) 75 mm thick as in sub base

M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors With grey cement and pigment over and including 20mm thick screed bedding layer of CM 1:6 complete

M&L 30mm thick sand cushioning under interlocking in floors including watering and consolidation.

M&L for Rubber moulded Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape & size conforming to IS 15658-2006 of 60 mm thickness, M-40 grade complete all as specified and as directed.

M&L for filleting section of fillet exc 25 but n.exc 50 sq cm in cement mortar 1;3 in any shape in cement mortar.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete drilled for fixing of steel sheeting or other covering, doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete Fe-290 (gde E-165).

S & F mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165

S&F Mild steel round bars bars 10mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410 W (Gde-E-250) quality or Fe 290 (Gde-E-165) complete all as specified

Supply only chain link fencing, MS galvanised of any size and type complete all as specified and as directed

Fixing only chain lnk fencing including line wires, any mesh, size, any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and as directed Note : chain link fencing and line wire shall be measured and paid separately as " supply only"

S&F Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165

Preparing new or previously untreated steel surface of any description, over 10 cm in width or girth not other wise described and appying two coats of red oxide primer.

Cleaning of floor trap/nahani traps in any floor by removing all sludge / waste etc including cleaning of connected pipe upto gully trap to remove blockage, and finaly washing with water including disposing of all sludge / waste to a distance exc 500 m and burried in trenches complete all as directed by Engr-in-Charge

Cleaning of gully traps by removing all sludge / waste etc including cleaning of connected pipe upto 1st Man Hole to remove blockage, and finaly washing with water including disposing of all sludge / waste to a distance exc 500 m and burried in trenches complete all as directed by Engr-in-Charge

Desludging & cleaning of manholes of any depth/ any size & shape by removing all sludge / waste etc from the manholes and disposing of all sludge / waste to a distance exc 500 m and burried in trenches complete all as directed by Engr-in-Charge

Cleaning of septic tank including pumping out water from tank mechnically or manually and removing sludge to a distance exc 500 m, burried in trenches , cleaning septic tank with fresh water etc. Capacity of septic tank not exceeding 100 users complete all as specified & directed by Engr-in-Charge.

Cleaning of septic tank including pumping out water from tank mechnically or manually and removing sludge to a distance exc 500 m, burried in trenches , cleaning septic tank with fresh water etc. Capacity of septic tank exceeding 100 users and not exceeding 500 users complete all as specified & directed by Engr-in-Charge.

Cleaning of sewage line of any length 100mm to 250mm dia of any depth/position by manual/mechanical rodding/water jet removing all sludge /waste and making the line functional including disposal of sludge/waste to a distance exc 500 m and burried in trenches complete all as directed by Engr-in-Charge

Removing building materials such as bricks, concrete,stones and debris etc to a distance upto 15 Km , beyond the lead included in the rates, including loading, unloading and stacking at the destination

M/s KAILASH CHANDRA

seema enterprises

M/s S.D Construction Co

SAI SAMARTH ENTERPRISES

RK AND SONS CREATION

Parmatma Enterprises

Shree Ayyappa Engineering