Loading
Loading…
Loading…
Tender Value
₹72.9 L
EMD Value
₹1.5 L
Closing Date
22 Oct 2026, 1:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
TECHNICAL
14 conditions · 3 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. Annual Contractual Turnover Data for the Previous 3/4 Years should be submitted as per Annexure-IX.(AnnexureVIB of Tender Documents)
Technical Eligibility Criteria: (a)The tenderer must have successfully completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender. (b) (i)In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed any of the following during last 07 seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(i): Separate completed works of minimum required values for each component shall also be considered for fulfillment of technical eligibility criteria. ( c) Similar nature of Work is defined as "Similar nature of Work is defined as "Supply, installation, testing and commissioning of any LT/HT Electrical Work. ." Note: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of opening of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Similar nature of Work is defined as "Supply, installation, testing and commissioning of any LT/HT Electrical Work".
39 conditions · 9 needing a document upload
Check List: The tenderer(s) would fill up the check list, as per Annexure-XXIII to ensure that they are submitting the complete tender offer.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
At TSK Division: Electrical Works for Renovation of Railway Heritage Park at NTSK.
LV-T-14-TSK-968~NFR
LV-T-14-TSK-968
Open
Works - General
8 Months
Tinsukia, Assam
₹0
₹1.5 L
30 Sept 2026
30 Sept 2026
8 Oct 2026
71 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 72,88,051 | ||
| — | 35.00 | — | — | ||
| Supply, installation, fitting and fixing of single-arm decorative Cast Iron Pole, 3 m height, with 30W decorative suspended spun-aluminium LED luminaire, complete with 300x300x10 mm base plate, 700 mm high Cast Iron base with service door for LILO connection, 75 mm dia. x 2600 mm flue pipe, decorative Cast Iron amulet at 1500 mm height, GI decorative bracket with Cast Iron embellishments and provision for suspended mounting of luminaire. LED luminaire: 30W, CCT 3000K/4000K, IP65, antique copper finish. Pole finish comprising 2 coats primer, 1 coat PU black, 1 coat lacquer and antique copper finish. Including PCC foundation as per manufacturer's recommendation and all accessories, complete in all respects as directed by Site In-charge and approved by Engineer. | — | — | — | 21,26,950 | |
| — | 6.00 | — | — | ||
| Supply, installation, fitting and fixing of double-arm decorative Cast Iron Pole, 3 m height, with 2 Nos. 30W decorative suspended spun-aluminium LED luminaires, complete with 300x300x10 mm base plate, 700 mm high Cast Iron base with service door for LILO connection, 75 mm dia. x 2600 mm flue pipe, decorative Cast Iron amulet at 1500 mm height, Cast Iron holder with GI decorative double-arm bracket and Cast Iron embellishments. LED luminaires: 30W each, CCT 3000K/4000K, IP65, antique copper finish. Pole finish comprising 2 coats primer, 1 coat PU black, 1 coat lacquer and antique copper finish. Including PCC foundation as per manufacturer's recommendation and all accessories, complete in all respects as directed by Site In-charge and approved by Engineer. | — | — | — | 4,35,420 | |
| — | 25.00 | — | — | ||
| Supply, installation, testing and commissioning of outdoor LED Bollard Luminaire, 1000 mm height, with contemporary square-profile Cast Iron body, polyester powder-coated finish and decorative side diffusers for uniform light distribution. Complete with 18W LED light source, integral electronic driver, suitable for 220-240V AC, 50Hz supply, minimum IP65 protection, suitable for pathway/landscape lighting, including all mounting accessories and hardware. Luminaire shall conform to relevant BIS/IEC standards and be provided with minimum 5-year warranty, complete in all respects as directed by Site In-charge and approved by Engineer. | — | — | — | 6,54,900 | |
| — | 12.00 | — | — | ||
| Supply, installation, testing and commissioning of Urban Decorative LED Spike Luminaire, 18W, suitable for landscape, pathway and urban outdoor lighting applications, complete with high-efficiency LED, CCT 3000K (Warm White), minimum IP65 protection, corrosion-resistant extruded aluminium housing with grey polyester powder-coated finish, integral LED driver, optical system, spike/mounting accessories, wiring and all necessary components for proper installation and operation, complete in all respects as directed by Site In-charge and approved by Engineer. | — | — | — | 63,720 | |
| — | 10.00 | — | — | ||
| Supply, installation, testing and commissioning of Urban Decorative LED Spike Luminaire, 18W, suitable for landscape, pathway and urban outdoor lighting applications, complete with high-efficiency Green LEDs having dominant wavelength 520-535 nm, minimum IP65 protection, corrosion-resistant extruded aluminium housing with grey polyester powder-coated finish, LED driver, optical system, spike/mounting accessories, wiring and all necessary components for proper installation and operation, complete in all respects as directed by Site In-charge and approved by Engineer. | — | — | — | 56,640 | |
| — | 1.00 | — | — | ||
| Supply, installation, testing and commissioning of Decorative LED Light Tree comprising 7.0 m high hot-dip galvanized pole of approx. 60 mm dia. with 7 Nos. main branches, each fitted with high-efficiency LED modules of 3W-7W with beam angle 120°-240°. Pole shall have service door for LILO cable connection and driver maintenance. Complete structure shall be hot-dip galvanized and finished with pure polyester powder coating in approved RAL colour. Luminaire and driver shall have minimum IP65 protection and operate on 220-240V AC, 50Hz supply, complete with base plate, 24 Nos. M24x1200 mm foundation bolts, all mounting accessories, wiring and necessary components, complete in all respects as directed by Site In-charge and approved by Engineer. | — | — | — | 8,20,100 | |
| — | 10.00 | — | — | ||
| Supply, installation, testing and commissioning of Victorian-style decorative LED Luminaire suitable for heritage lighting applications, with corrosion-resistant cast aluminium housing and UV-stabilized polycarbonate protective optical enclosure. Complete with 50W high-efficiency LED source, CCT 4000K, minimum IP65 ingress protection and IK07 impact resistance, suitable for surface mounting with stainless steel hardware and couplers. Fitting shall operate on 220-240V AC, 50Hz supply and conform to relevant IS/IEC standards, complete with LED driver, optics, mounting accessories and all necessary components, as directed by Site In-charge and approved by Engineer. | — | — | — | 97,940 | |
| — | 2.00 | — | — | ||
| Supply, installation, testing and commissioning of Victorian-style decorative outdoor LED Luminaire suitable for heritage lighting applications, with high-quality corrosion-resistant cast aluminium housing and toughened glass optical protector. Complete with 75W high-efficiency LED source, CCT 4000K, minimum IP65 protection and IK07 impact resistance, suitable for surface/post- top mounting with stainless steel couplers and hardware. The luminaire shall operate on 220-240V AC, 50Hz supply and conform to relevant IS/IEC standards, complete with LED driver, optics, mounting accessories and all necessary components, as directed by Site In-charge and approved by Engineer. | — | — | — | 27,612 | |
| — | 10.00 | — | — | ||
| Supply, installation, testing and commissioning of Outdoor Decorative RGB LED Flood Light suitable for architectural lighting applications, with pressure die-cast aluminium housing having corrosion-resistant grey polyester powder-coated finish and toughened glass cover. Complete with 50W high-efficiency RGB LED, minimum IP65 ingress protection and IK07 impact resistance, external power supply/driver, mounting brackets and all necessary accessories. The fitting shall operate on 220-240V AC, 50Hz supply and conform to relevant IS/IEC standards, complete in all respects as directed by Site In-charge and approved by Engineer. | — | — | — | 84,960 | |
| — | 20.00 | — | — | ||
| Supply, installation, testing and commissioning of Outdoor Decorative LED Flood Light suitable for architectural lighting applications, with corrosion-resistant grey polyester powder- coated extruded aluminium housing and high-transmittance PMMA lenses. Complete with 50W high- efficiency LED source, CCT 3000K (Warm White), minimum IP65 protection and IK09 impact resistance, electronic LED driver, minimum 10kA external SPD, mounting brackets and all necessary accessories. The fitting shall operate on 220-240V AC, 50Hz supply and conform to relevant IS/IEC standards, complete in all respects as directed by Site In-charge and approved by Engineer. | — | — | — | 1,69,920 | |
| — | 12.00 | — | — | ||
| Supply, installation, testing and commissioning of UFO-Type LED High Bay Luminaire suitable for architectural lighting applications, having compact circular UFO design with corrosion- resistant grey polyester powder-coated extruded/die-cast aluminium housing. Complete with 150W high-efficiency LED source (3 x 50W modules), CCT 3000K (Warm White), high-transmittance PMMA lenses, minimum IP65 protection and IK09 impact resistance, electronic constant-current LED driver, minimum 10kA external SPD, suspension/mounting arrangement and all necessary accessories. The fitting shall operate on 220-240V AC, 50Hz supply and conform to relevant IS/IEC standards, complete in all respects as directed by Site In-charge and approved by Engineer. | — | — | — | 1,55,760 | |
| — | 2.00 | — | — | ||
| Supply, installation, testing and commissioning of Urban Decorative LED Post-Top Luminaire complete with 3.0 m decorative pole, suitable for parks and urban streetscape lighting, having decorative crown/architectural design with 45W high-efficiency LED source, corrosion- resistant aluminium housing, UV-stabilized diffuser/lens and minimum IP65 protection. Pole shall be of galvanized steel/aluminium with corrosion-resistant polyester powder-coated finish. Complete assembly shall include LED driver, mounting arrangement, internal wiring, terminal connections, base plate, foundation bolts and all necessary accessories. The fitting shall operate on 220-240V AC, 50Hz supply and conform to relevant IS/IEC standards, complete in all respects as directed by Site In- charge and approved by Engineer. | — | — | — | 67,496 | |
| — | 1.00 | — | — | ||
| Supplying Installation, Testing and Commissioning of DMX Controller for the system including address writer and programming the DMX controller with the suitable designs as decided by the Engineer-in-charge/client department ( not less than 10 nos designs) and all other accessories required for the running of the system Controller should have Input Power 5-5.5V DC 0.6A and Output Protocol DMX512 with 4 universe, 2 universe should work in Stand Alone Mode and 2 universe should work in live mode with laptop/ tablet / computer. The universe should be expandable from 2 to 4 DMX512 universes. It should be compatible for Programmability with PC, Mac, Tablet, Smartphone by using USB & Ethernet. Dmx controller should have network controllability feature to control the scene remotely through LAN and triggered via UDP packets on port 2430. It's must have Connections Type C USB, XLR3, Ethernet, battery. There should be provision for Memory microSD card. Device should have Intuitive backlit keyboard with 10 presents and also have provision of keypad on device for changing scene manually from device. Device should be capable to work on Extended triggering possibilities (TCA) & also have Smart Upgrade Technology (SUT). It is an IP 20 unit and has an Operating Temperature of 0°C to 50°C.OS Requirements for the controller is Mac OS X 10.8-10.12, Windows 7/8/10/11. Standards should be EC, EMC, ROHS. The controller should have a variety of features including 2048 DMX channels, clock/calendar, iPhone/iPad /Android remote control, Ethernet facilities, dry contact port triggering and multi-zone SD card memory. Network synchronization of one area across hundreds of universes with the possibility of 99 scenes across 5areas with auto clock triggering for sunrise and sunset and as per the festivals for specific occasions.Device should be equipped with meta clamp to mounton wall with data enablers and splitters as required. To be provided with IP 66 enclosure if installed in external environment.As per direction of site incharge and approved by engineer. | — | — | — | 1,51,040 | |
| — | 20.00 | — | — | ||
| Supply, installation, testing and commissioning of earthing electrode comprising 50 mm dia, 3.6 mm thick, 3.0 m long GI pipe, complete with 6 SWG GI earth continuity wire, as per Drawing No. PCEE/ELG/DRG/2024/1 dated 30.09.2024, including earth lead connection, necessary clamps, GI hardware, charcoal/coke and salt where required, excavation, filling, watering arrangement, masonry chamber with suitable cover and all other necessary materials, labour, tools and tackles, complete in all respects as required at site. | — | — | — | 82,880 | |
| — | 500.00 | — | — | ||
| Supply, laying,connection, testing and commissioning of cable size 16 mm.sq. 2 core ,LT XLPE Insulated, Cores Laid Up, PVC Inner sheathed, Armoured cable having Aluminium Strip, Glavanised Wire Solid Aluminum Conductor, Extruded PVC Type ST2 Sheathed, 650/1100V Grade As Per IS 7098(Part 1) 1988. For laying of above cable by digging of trench and excavation of earth to depth 0.75 Mtrs. and breadth 0.5 Mtrs. below the ground level and a layer of sand of 0.075 Mtrs. thickness shall be spread over the ground before laying the cable and the cable shall be covered with a layer of sand of 0.075 Mtrs. thickness. The bottom of cable trench shall be leveled and got rid of any sharp material. The cable route markers should be provided along the route of cables to indicate their presence so that damage/accident are Not caused by inadvertent digging.All conditions to be fulfilled as per DRG No : PCEE/ELG/DRG/2024/2 Dtd 04.10.2024 | — | — | — | 2,95,000 | |
| — | 260.00 | — | — | ||
| Supply, laying and testing and commissioning of LT XLPE Insulated, Cores Laid Up, PVC Inner sheathed, Armoured stranded aluminum conductor cable size 25 mm.sq. 2 core having Galvanized steel Strip, Extruded PVC Type ST2 Sheathed, 650/1100V Grade As Per IS 7098(Part 1) 1988. For laying of above cable by digging of trench and excavation of earth to depth 0.75 Mtrs. and breadth 0.5 Mtrs. below the ground level and a layer of sand of 0.075 Mtrs. thickness shall be spread over the ground before laying the cable and the cable shall be covered with a layer of sand of 0.075 Mtrs. thickness. The bottom of cable trench shall be leveled and got rid of any sharp material. The cable route markers should be provided along the route of cables to indicate their presence so that damage/accident are Not caused by inadvertent digging. All conditions to be fulfilled as per DRG No : PCEE/ELG/DRG/2024/2 Dtd 04.10.2024 | — | — | — | 1,60,940 | |
| — | 1.00 | — | — | ||
| "Supply, installation, testing and commissioning of Musical Fountain with colour- changing LED lighting and programmable control system, comprising suitable SS/GI fountain nozzles including Finger Jet, Shooter Jet, Revolving Jet, Sunglass effect and 3 Nos. circular/ring fountain arrangements, complete with 5 HP, 3-phase induction motor-driven pump(s), suitable for continuous fountain operation. The system shall include suitable water circulation pumps, SS/GI/PVC piping and fittings, valves, strainers, electrical control panel with suitable MCB/MCCB, contactors, overload protection, VFD/soft starter wherever required, programmable/DMX-based controller for synchronisation of water effects, music and colour-changing lights, LED RGB/RGBW underwater/fountain lights with suitable IP-rated protection, power and control cables, connectors, junction boxes and all necessary accessories.The work shall include complete hydraulic, electrical and control-system installation, interconnection of pumps, nozzles and lighting, necessary supports and fixing arrangements, programming/synchronisation of fountain sequences with music, testing, balancing and commissioning of all water jets and lighting effects, including all materials, labour, tools, tackles and accessories required to make the musical fountain fully functional and complete in all respects as directed by the Engineer-in-Charge." | — | — | — | 5,35,000 | |
| — | 300.00 | — | — | ||
| Supply, laying , connection , testing and commissioning of LT XLPE Insulated, Cores Laid Up, PVC Inner sheathed, Armoured stranded aluminum conductor cable size 50 mm.sq. 4 core having Galvanized steel Strip, Extruded PVC Type ST2 Sheathed, 650/1100V Grade As Per IS 7098(Part 1) 1988. For laying of above cable by digging of trench and excavation of earth to depth 0.75 Mtrs. and breadth 0.5 Mtrs. below the ground level and a layer of sand of 0.075 Mtrs. thickness shall be spread over the ground before laying the cable and the cable shall be covered with a layer of sand of 0.075 Mtrs. thickness. The bottom of cable trench shall be leveled and got rid of any sharp material. The cable route markers should be provided along the route of cables to indicate their presence so that damage/accident are Not caused by inadvertent digging. All conditions to be fulfilled as per DRG No : PCEE/ELG/DRG/2024/2 Dtd 04.10.2024 | — | — | — | 4,43,400 | |
| — | 300.00 | — | — | ||
| Supply, laying, fixing and connection of 4.0 sq.mm, 3-core copper conductor, PVC insulated and PVC sheathed flat industrial cable, 1100 V grade, conforming to IS: 694, suitable for wiring of bollard lights, including necessary cable glands/lugs, termination, joints, identification ferrules, saddles/clamps and other accessories, complete with routing, dressing, fixing and connection at both ends, testing and commissioning, including all necessary labour, tools and tackles, complete in all respects as required at site. | — | — | — | 1,52,400 | |
| — | 180.00 | — | — | ||
| Supply, drawing and connection of single core 6 sq. mm PVC insulated & unsheathed multistrand FRLSH copper cable conforming to IS: 694 for voltage grade upto 1100 Volts , as per direction of supervisor incharge at site. | — | — | — | 22,176 | |
| — | 270.00 | — | — | ||
| Supply, drawing and connection of single core 4 sq. mm PVC insulated & unsheathed multistrand FRLSH copper cable conforming to IS: 694 for voltage grade upto 1100 Volts , as per direction of supervisor incharge at site. | — | — | — | 22,302 | |
| — | 360.00 | — | — | ||
| Supply, drawing and connection of single core 2.5 sq. mm PVC insulated & unsheathed multistrand FRLSH copper cable conforming to IS: 694 for voltage grade upto 1100 Volts , as per direction of supervisor incharge at site. | — | — | — | 20,304 | |
| — | 4.00 | — | — | ||
| Supply, fitting, fixing, testing & commissioning of wall mounted type 6 way double door SPN MCB DB having IP 43 protection,Shrouded Neutral Bar & Bus Bar, Cement Spill Protector & Door Earthing with the following domestic switchgears:- :- i) 240/415V, 50Hz, 10kA BC "C" series SP 32 Amps. MCB (In accordance with IS/IEC 60898-1) = 2 No. ii) 240V, 50Hz, with 10kA BC "C" series SP 16 Amps. MCB (In accordance with IS/IEC 60898-1) = 2 Nos. (iii) 240V, 50Hz, with 10kA BC "C" series SP 10 Amps. MCB (In accordance with IS/IEC 60898-1) = 2 Nos. | — | — | — | 19,360 | |
| — | 2.00 | — | — | ||
| Supply, installation, testing and commissioning of VTPN Distribution Board System type 4 way double door, IP 43 Protection with MCCB as incomer with the following switchgears: (i) MCCB, 4 pole, 100 Amps, 25 KA BC= 1 No (ii) MCB , SP, 63 Amps, 'C' series=4 Nos. (iii) MCB, SP, 32 Amps, 'C' series=3 Nos | — | — | — | 57,380 | |
| — | 6.00 | — | — | ||
| Supply, fitting, fixing of Inverter Split Air Conditioner 1.5 Ton , 5 Star, 100% copper tube of condenser coil, operating on 230V AC 50Hz, ISEER Value: 4.73, provided with HD filter and Antivirus protection including required connecting pipe & bracket for fixing of outdoor unit on wall | — | — | — | 2,65,686 | |
| — | 20.00 | — | — | ||
| Supply, fitting , fixing of surface mounted LED Batten 20W, 4 Ft, ultra slim co- extruded polycarbonate channel with integrated electronic driver should be as per IEC: 62384/IS:16104( SMPS based constant current output, THD<20%), IP20 protection, color temperature=6500K, rated input voltage=230V AC, 50 Hz, power factor=0.9, view angle>=120°, lumens output not less than 100 lm/Watt, operating voltage range: 140-270 V AC. LED Should be as per LM-80/IS:16105. Fixture Size:(LXWxH=1156x25x35 mm +/-1) . The fitting should be warranted for 5 Years. Make of LED Batten: Havells/Syska/HPL/Bajaj/Crompton Greaves. | — | — | — | 5,020 | |
| — | 15.00 | — | — | ||
| Supply of Energy efficient IP 66, 70W led flood light luminarie . Specification of Flood light: Life: 50000 Hours , System Efficacy:100lm/Watt, Optical cover: Toughened Glass. Material: Pressure Die cast Alluminium, Surge Protection: 5 KV internal and 10KV External, Degree of protection: IP66, Electronic driver: In-built, replaceable electronic driver with APFC, THD<10% | — | — | — | 70,500 | |
| — | 15.00 | — | — | ||
| Supply and fitting , fixing of 18 Watt LED ,Slim, compact, auminum die cast edge lit panel light , recess mounted round fixture with opal diffuser and separate electronic driver. Ceiling Cut Out (210x210 mm). | — | — | — | 25,800 | |
| — | 200.00 | — | — | ||
| Supply and laying of 40 mm GI pipe, medium/heavy class as specified, conforming to the latest applicable IS 1239 (Part 1) with threaded ends, including all necessary fittings and accessories, complete as required for cable protection, earthing, water supply, or other approved applications. | — | — | — | 48,200 | |
| — | 200.00 | — | — | ||
| Supply, fitting and fixing of heavy-duty rigid 25 mm PVC casing-capping complete with accessories, conforming to relevant Indian Standards (latest edition), suitable for surface wiring. The casing-capping shall be manufactured from high-impact, self-extinguishing, virgin PVC material with smooth finish, adequate mechanical strength, and resistance to moisture, corrosion, fungus, termites, and UV degradation. | — | — | — | 9,400 | |
| — | 200.00 | — | — | ||
| Supplying and laying of following DWC HDPE pipe 63 mm dia (OD-63 mm & ID-51 mm nominal) ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. | — | — | — | 57,800 | |
| — | 5.00 | — | — | ||
| Supply, fitting, fixing of 200 Amps outdoor type cable junction box, angle frame mounted, dust & vermin proof, complete with rain cap, aluminium basbar of suitable size for TPN, 200 Amps, 415 V made out of 16 SWG CRCA sheet duly painted, Cable Junction Box Size: (lxbxh=450x 450x600 mm) with gland. The base of the fedder pillar junction box to be provided with CC foundation of propotion 1:1.5:3( cement, sang,Chips) after connection of Ug cables. | — | — | — | 44,695 | |
| — | 300.00 | — | — | ||
| Supply, fitting, fixing and connection of 20 mm dia FRLS round uPVC conduit pipe of medium mechanical stress, conforming to relevant IS standards, including all necessary accessories such as bends, couplers, tees, junctions, inspection boxes, saddles/clamps, screws and other fixing materials, complete with cutting, jointing and alignment of conduit, and providing necessary supports at suitable intervals, including all labour, tools and tackles, complete in all respects as required at site. | — | — | — | 13,800 | |
| — | 2.00 | — | — | ||
| Supply, fitting and fixing of LED Rope Light, RGB + Warm White, 50 metres length, suitable for 230 V AC operation, with LED strip/rope enclosed in flexible weather-resistant PVC housing, complete with suitable power supply/controller, connectors, end caps and mounting/fixing accessories, including cutting, jointing, termination, testing and commissioning, with all necessary labour, tools and tackles, complete in all respects as required at site. | — | — | — | 20,800 | |
| — | 10.00 | — | — | ||
| Supply, fitting and fixing of suitable RGB power cord/cable for LED rope lights, complete with necessary connectors, plugs/terminals, joints and accessories, properly routed and secured, including termination and connection with the rope light and power supply/controller, testing and commissioning, with all necessary labour, tools and tackles, complete in all respects as required at site. | — | — | — | 2,750 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCCAPRIL2022WITHALLACS.pdf GCC 2022 WITH ACS
ATTACHMENT
AnnexuresSectionVII.pdf
ATTACHMENT
TenderDocumentTSK968_1.pdf Tender Document TSK 968
ATTACHMENT
GCCAPRIL2022WITHALLACS.pdf
ATTACHMENT
TenderDocumentTSK968_1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .