Repair Renovation of Primary Health Sub-Centre Building at Jindhra

Amount

Engaging Mason for Dismentally of damged door/windows.

Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Demolishing mud phaska in terracing and disposal of material within 50 metres lead

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

6mm cement plaster to ceiling of mix 1 : 3 (1 cement: 3 fine sand)

Painting top of roofs with bitumen of approved quality at 17 kg 12.17 per 1 Osqm impregnated with a cost of coarse sand at 60 cudm per 10 sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete.

10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35kg per cum of earth and gobri leaping with bhusa at 35kg per cum of earth and gobri leaping with mix 1:1 ( 1 clay: 1 cow dung) and covered with flat tile bricks of class designation 1 00 grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finishing neat. With Hand moulded F.P.S brick tiles.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Sal wood

Providing and fixing glazed shutters for doors, windows and clerestory windows using 10kg/sqm (4mm thick) float of glass panes including lSI marked M.S. pressed butt·hinges bright finished of required size with necessary screws. Second class deodar wood. (30mm thick)

Providing and fixing 30 mm thick wire gauze shutters using galvanised M.S. wire gauze .of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows: lSI marked M.S. pressed but hinges bright finished butt hinges of required size with necessary screws Second class deodar wood.

Providing and fixing 35mm panelled and glazed shutters for doors, windows and cleresory windows including ISI marked, MS. Pressed but hinges bright finished of required size with necessary crew excluding panelling which will be paid for separately, all complete as per direction of Engineer in-charge. second class deodar wood.

Providing and fixing paneling of plain particle board flat pressed, 3 layers (like Nova pan, Eco board etc.) or graded wood particle board (like Bhutan Board) medium density Grade I, IS : 3087 marked for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Paneling for paneled or paneled and glazed shutters 25mm to 40mm thick. Plain particle board flat pressed, 3 layers (like Novapan, Ecoboard etc.) or graded wood particle board (like bhutan board) medium density grade I, IS 3087 marked.

Providing and applying white cement based putty of average thickness 2mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Wall Painting with plastic emulsion paint of approved lj brand and manufacture to give an even shade. Two or more coats on new work.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved ake like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin-Charge in skirting, risers of steps and dados over 12mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 kg/10sqm.

Painting of flower and logos around the Windows & Doors. Proper branding as per Health and Wellness Centres Drawings.

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade Old steel work (one or more coats).

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Carriage of material by Mechanical Transport including loading / unloading and stacking at site complete.

Sand for an avg. lead of 10.00 Kms..

Brick Tiles for an avg. lead of 60.00 Kms..

Suman Lata

kimat