PROVN OF TEMP CAR PARKING SHED, WATER TANK STAGING ,IRON GRILL FOR DOORS AND WINDOWS AND ROLLING SHUTTER AT VARIOUS LOCATIONS AT AFS SONEGAON, NAGPUR

Amount

Excavation in post holes (or similar holes) in soft/ loose soil each hole n. exc. 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers n. exc. 25cm, watering and removing surplus soil to a distance exc. 250m and making good surfaces complete all as specified and directed.

M&L for providing PCC (1:2:4) type B-2 using 40mm graded stone aggregate as in foundation filling mass concrete complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in coping, kerbs, channels, water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc. complete all as specified and directed.

M&L for Fe 410-W (Gde-E- 250) quality-A Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.complete all as specified and as directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment. Fe 410-w (Gde-E-250)quality A complete all as specified and directed.

S&F 11mm to 15mm dia Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 5cm long complete all as specified and directed.

M&L for Mild steel framed work such as gates and grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290, Gde E-165 all as specified and as directed.

S&F rolled mild steel framed work as Joist, channel, angle, or tee sections,fixed independently, without connecting plates, etc. Fe- 410 E-250 Quality ''B'' complete all as specified and directed.

S&FSteel rolling shutters with thickness of laths 1.25 mm, gear operated type with bevel gear box and crank handle as specified including top cover, an choring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and directed.

S&FSteel rolling shutters with thickness of laths 1.25 mm, with out ball bearing as specified including top cover, an choring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and directed.

S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

M&L for Fe 410-W (Gde-E- 250) quality-A Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc complete all as specified and as directed.

S&f pre-painted galvalume aluminiun zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with J hooks including self tapping screws and self drilling screws of appropriate size with rubber washer for water tight fixing complete all as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M &L for preparation new steel and iron surfaces not otherwise described exc 10cm width or girth and applying two coats of synthetic enamel paints over one coat of primer of red oxide complete all as specified and as directed.

M&L for applying one coat of synthetic enamel paint over one coat of primer of red oxide on steel surfaces of any description over 10cm width or girth including preparation of old painted surfaces complete all as specified and as directed.

Suply and laying of GI tubing 20mm bore medium grade with all fittings (such as bends, elbows, tees, short pieces, connectors, back-nuts, diminishing pieces, caps, plugs and unions etc.) including cutting for branch line & making threads complete fixed to wall/flooring /ceiling etc all as specified.

All as per Item No 17 here in before but 15mm bore

S & F stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes for union & fixed of size 20 mm bore all as specified and directed.

S&F 15mm dia Chromium plated fancy type Stop valves, cast copper alloy screwed down,high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S & F 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F 500 ltr capacity three layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F 20mm bore dia ball valve PTMT with epoxy coated aluminium rod for 20mm bore pipe, weight not less than 210gms, high pressure with polyethylene high density float and complete screwed for iron pipe complete all as specified and directed.

M/s M.G. Hargunani

dhanshree enterprises

M/s S. S. MUNDE

karambir constructions