Construction of Boxing Hall (partially) in Chowk Stadium Lucknow. (Balance Work)

Amount

Labour Work

Labour charges for laying / R.C.C 1:1:2 with cement coarse sand and 20 mm stone aggregate / R.M.C Grade M -25. as per specification including piping and pumping work upto working space at site. upto Plinth

Labour charges for laying PCC. M-7.5 as per specification

Class- 150 brick work in 1:6 cement and coarse .sand mortar,labour and T & P etc. required for proper completion of work. (Labour only)

Class- 150 brick work in 1:4 cement and coarse .sand mortar,labour and T & P etc. required for proper completion of work. (Labour only)

Labour charges for fixing of granite

Labour charge of 15 mm cement plaster with 1:6 (1 cement : 6 coarse sand) cement,coarse sand mix.

Labour charge of 10 mm cement plaster with 1:3 (1 cement : 3 coarse sand) cement,coarse sand mix.

Labour charge of 20 mm cement plaster with 1:3 (1 cement : 3 coarse sand) cement,coarse sand mix.

Labour charge of applying of wall care putty 2 coat.

Labour charge of applying of exterior paint (outside)

Labour charge of applying of oil bound distemper (inside)

Labour charges for steel work such as reinforced concrete work including cutting, bending (required shape), straightening, placing in proper position and binding wire t&p upto 200 metre shifting etc complete.

Labour charge of laying of interlocking tiles 80mm thick.

Labour charges for filling of brick bats

Labour charges for 40mm stone ballast filling.

Labour charges for 20mm stone grit filling.

Labour charges for coarse sand filling

Labour Charges for Moulding of Granite.

Labour Charges for laying of Sheet including grid.

Disposal of malwa

Higher charges of J.C.B.

Supply of Material

Providing and fixing of /low or auto cistern 10 lit or flush valve cock including fixing of brackets (sera/pariware/hindware)

Providing and fixing of push cock (sera/pariware/hindware)

Fixing of GI spout pipe upto 50mm dia 300mm long including cutting of pipe complete

Making of water tank connection inlet, outlet, overflow, clean outlet each point

s Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 andIS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sideswith required EPDM rubber/ neoprene gasket etc. Aluminium sectionsshall be smooth, rust free, straight, mitred and jointed mechanicallywherever required including cleat angle, Aluminium snap beading forglazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing,paneling and dash fasteners to be paid for separately) : G.F ame as above anodised aluminium doors with shutter of approved make 2 mm thick having section member 101.60 mm x44.45 mm single rebate/double rebate and 84x44.50 mm top,84x44.50 mm style.114x44.50 mm bottom and 84x44.450 mm middle member etc as per specification including snap beading /glazed clip and epdm rubber etc complete for proper completion of work.

Providing and fixing of anodised aluminium sliding windows , ventilators with shutter 2 mm thick of approved make as per specification including snap beading /glazed clip and epdm rubber etc complete for proper completion of work as per direction of Engineer in Charge..

Providing and fixing of stainless steel ( Grade 304) railing 900 mm hieght made of hollow tubes 50 mm, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge including fixing accessories such as nuts, bolts, fasteners etc stair case, ramp and balconey

Providing and fixing Alum. sliding door bolts ISI marked with nuts and screws etc. complete :300x16 mm

Providing and fixing Alum. tower bolts ISI marked with necessary screws etc. complete : 200x10 mm

Providing and fixing Alum. handles ISI marked anodised transparent or dyed to required colour or shade with necessary screws etc. complete : 150 mm

Providing and fixing aluminium hanging floor door stopper transparent or dyed to required colour and shade with necessary screws etc. complete. Twin rubber stopper

Providing and fixing hydrolic door closer with necessary screws etc. complete : (Godrej/Dorma make)

Providing and fixing of Alum. hinges 125 mm with necessary screws etc. complete :

Providing & Fixing of Disabled Toilet Kit Complete with all Respect.

Supply and Fixing of 8 passanger lift as per specification (Rolex/Orient ) deawing/specification provided by Nigam.

Black thick polythene

curing pipe

M/S Arvind Kumar