REPAIRS/ MAINTENANCE OF SUBMAIN / POINT WIRING ALONGWITH MAINTENANCE OF GEYSER 25/50 LTR EXHAUST FAN AND CERTAIN MISC WORKS AT AF STATION NATHATOP UNDER GE (AF) UDHAMPUR

Amount

Taking down carefully aluminum/copper point wiring (light/ fan/socket or power) complete with fittings such as switches, tube lights, ceiling rose, pendants, regulators, Main switches from control board and making good disturbed surfaces of walls, floor to match with existing specifications complete all as specified.

Point wiring using approved colour coding as per IS for one light/bell/buzzer point controlled by one switch or one fan point controlled by one switch & fan regulator with PVC insulated, unsheathed FRLS multi stranded copper conductor 1.5 sqmm (nominal area) 1100 volt grade cable for phase & neutral drawn through existing conduits, with new modular sunken boxes and suitable size of frame, cover for mounting switch, socket and regulator fixed on surface in touch with wall including 1.5 sqmm (nominal area) copper conductor PVC insulated, unsheathed, multi stranded FRLS cable as earth wire and connected to earth dolly complete all as specified and as directed including cutting chases to wall and making good the disturbed surfaces to match with the existing specifications complete all as specified. Make of conductor : Havells/polycab/KEI Note :-Switches, sockets, outlets & regulators will be measured and paid for separately.

Point wiring using approved colour coding as per IS for one light/bell/buzzer point controlled by one switch or one fan point controlled by one switch & fan regulator with PVC insulated, unsheathed FRLS multi stranded copper conductor 1.5 sqmm (nominal area) 1100 volt grade cable for phase & neutral drawn through PVC surface PVC conduits, with new boxes and suitable size of frame, cover for mounting switch, socket and regulator fixed on surface in touch with wall including 1.5 sqmm (nominal area) copper conductor PVC insulated, unsheathed, multi stranded FRLS cable as earth wire and connected to earth dolly complete all as specified and as directed including cutting chases to wall and making good the disturbed surfaces to match with the existing specifications complete all as specified. Note :-Switches, sockets, outlets & regulators will be measured and paid for separately.

Description all as per serial item No. 3.00 here-in-before but for one 6 Amps socket outlet on the Independent board complete all as specified

Description all as per serial item No. 3.00 here-in-before but for one 6 Amps socket outlet on the same board

Point wiring for one 16 Amps socket outlet independent with PVC insulated, unsheathed FRLS multi stranded copper conductor 2.5 sqmm (nominal area) 1100 volt grade cable for phase & neutral drawn through surface PVC heavy duty conduits with new boxes and suitable size of frame, cover for mounting switch, socket and regulator fixed on surface in touch with wall including 2.5 sqmm (nominal area) copper conductor PVC insulated, unsheathed, multi stranded FRLS cable as earth wire and connected to earth dolly complete all as specified and as directed including cutting chases to wall and making good the disturbed surfaces to match with the existing specifications complete all as specified. Make of conductor : Havells/polycab/KEI Note :-Switches, sockets, outlets & regulators will be measured and paid for separately.

Point wiring for one 16 Amps socket outlet independent with PVC insulated, unsheathed FRLS multi stranded copper conductor 4.0 sqmm (nominal area) 1100 volt grade cable for phase & neutral drawn through surface PVC heavy duty conduits with new boxes and suitable size of frame, cover for mounting switch, socket and regulator fixed on surface in touch with wall including 4.0 sqmm (nominal area) copper conductor PVC insulated, unsheathed, multi stranded FRLS cable as earth wire and connected to earth dolly complete all as specified and as directed including cutting chases to wall and making good the disturbed surfaces to match with the existing specifications complete all as specified. Make of conductor : Havells/polycab/KEI Note :-Switches, sockets, outlets & regulators will be measured and paid for separately.

Point wiring for one 16 Amps socket outlet independent with PVC insulated, unsheathed FRLS multi stranded copper conductor 4.0 sqmm (nominal area) 1100 volt grade cable for phase & neutral drawn through existing conduits with new modular sunken boxes and suitable size of frame, cover for mounting switch, socket and regulator fixed on surface in touch with wall including 4.0 sqmm (nominal area) copper conductor PVC insulated, unsheathed, multi stranded FRLS cable as earth wire and connected to earth dolly complete all as specified and as directed including cutting chases to wall and making good the disturbed surfaces to match with the existing specifications complete all as specified. Make of conductor : Havells/polycab/KEI Note :-Switches, sockets, outlets & regulators will be measured and paid for separately.

Point wiring for one 16 Amps socket outlet independent with PVC insulated, unsheathed FRLS multi stranded copper conductor 2.5 sqmm (nominal area) 1100 volt grade cable for phase & neutral drawn through existing conduits with new modular sunken boxes and suitable size of frame, cover for mounting switch, socket and regulator fixed on surface in touch with wall including 2.5 sqmm (nominal area) copper conductor PVC insulated, unsheathed, multi stranded FRLS cable as earth wire and connected to earth dolly complete all as specified and as directed including cutting chases to wall and making good the disturbed surfaces to match with the existing specifications complete all as specified. Note :-Switches, sockets, outlets & regulators will be measured and paid for separately.

Supply and in repair Switch Piano, flush type single pole, oneway 6 Amps conforming to IS-3854 complete all as speciified and as directed

Supply and in repair Switch socket combination Piano,flush type single pole,oneway 6 Amps conforming to IS-3854 complete all as specified and as directed

Supply and fixing of 15 Amps switch socket combination including taking down complete all as specified and as directed

Supply and in repair Ceiling rose, surface bakelite 65 x 50mm, two to three terminals complete all as specified and as directed.

M&L in repair Sub main wiring using approved colour coding as per IS with two single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 4.00 sqmm (nominal area) 1100 volts grade and one single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 4.00 sqmm (nominal area) 1100 volts grade cable as earth wire including suitable size of PVC conduit drawn through rigid Surface PVC conduit, heavey duty and connected to main board and making good disturbed surface after taking out old unserviceable sub main wiring and disposing from site complete all as specified and as directed. Make of conductor : Havells/polycab/KEI Note: Two runs each of 4.00 sqmm main cable and one RM of 4.00 sqmm cable as earth wire together alongwith conduit shall be considered as 1 running metre for payment purpose.

M&L in repair Sub main wiring using approved colour coding as per IS with two single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 6.00 sqmm (nominal area) 1100 volts grade and one single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 6.00 sqmm (nominal area) 1100 volts grade cable as earth wire including suitable size of PVC conduit drawn through rigid Surface existing conduit, heavey duty and connected to main board and making good disturbed surface after taking out old unserviceable sub main wiring and disposing from site complete all as specified and as directed. Make of conductor : Havells/polycab/KEI Note: Two runs each of 6.00 sqmm main cable and one RM of 6 .00 sqmm cable as earth wire together alongwith conduit shall be considered as 1 running metre for payment purpose.

M&L Sub main wiring using approved colour coding as per IS with two single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 2.5 sqmm (nominal area) 1100 volts grade and one single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 2.5 sqmm (nominal area) 1100 volts grade cable as earth wire including suitable size of PVC conduit drawn through rigid Surface PVC conduit ISI Marked, heavy duty and connected to main board and making good disturbed surface after taking out old unserviceable sub main wiring and disposing from site complete all as specified and as directed. Make of conductor : Havells/polycab/KEI Note: Two runs each of 2.5sqmm cable and one RM of 2.5 sqmm cable as earth wire together alongwith conduit shall be considered as 1 running metre for payment purpose.

S&F of Building security LED street light fitting 30 Watt 6500K pf >.90 efficiency 100lm/W 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp fixing of wall,pole,building with impact and corrosion resistant including thermal management in multiple optics complete with IP 65 protection including taking down complete all as specified and as directed.

Street light bracket made out of 32/40 mm dia GI light grade tubing not less than .75 Mtr long bend to shape including pole clamps/fastners clips nails made out flat iron and nuts, bolts and washers etc complete all as specified and directed.

Supply and in repair Plastic distribution board plastic ISI Mark 2 modules metal SPN 2 way (when MCBs to be used) flush mounted including taking down existing unserviceable DBs /board /box including accessories therein and disposing off complete all as specified and directed. Make:Legrand/HAVELLS /indoasian

M&L MCB SP 6-32 Amps, 240 Volts, having breaking capacity 10 kA, 'C' characterstic complete all as specified and as directed. Make: of Legrand or equavalent to HAVELLS / SIEMENS/indoasian

M&L Sub main wiring using approved colour coding as per IS with two single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 10.00 sqmm (nominal area) 1100 volts grade and one single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 10.00 sqmm (nominal area) 1100 volts grade cable as earth wire including suitable size of PVC conduit drawn through rigid Surface PVC conduit, heavey duty and connected to main board and making good disturbed surface complete all as specified and as directed.Make of conductor : Havells/polycab/KEI Note: Two runs each of 10.00 sqmm main cable and one RM of 10.00 sqmm cable as earth wire together alongwith conduit shall be considered as 1 running metre for payment purpose.

M&L in repair Sheet metal enclosures for DBs SPN 2 way flush mounted including accessories therein and disposing off complete all as specified and directed. Make:Legrand/HAVELLS / indoasian

M&L in repair Sheet metal enclosures for DBs SPN 4 way flush mounted including accessories therein and disposing off complete all as specified and directed. Make:Legrand/HAVELLS / indoasian

M&L in repair of sheet metal enclosures double door for DBs SPN 12 way 240 Volt with 200 Amps rated Busbar including accessories therein and disposing off complete all as specified and directed.(Make: Indoasian or its equivalent/legrand/CG)

M&L in repair Sheet metal enclosures for DBs SPN 8 way with 200Amps rated busbar including accessories therein and disposing off complete all as specified and directed. Make : Legrand/HAVELLS / indoasian

M&L in repair of MCB SPN 63 Amps, 240 Volts, having breaking capacity 10 kA, 'C' characterstic complete all as specified and as directed. .(Make: Indoasian or its equivalent/ legrand /CG )

M&L in repair MCB SPN 40 Amps, 240 Volts, having breaking capacity 10 kA, 'C' characterstic complete all as specified and as directed. Make of Legrand or equavalent to HAVELLS / SIEMENS/indoasian

M&L in repair MCB SP 6-32 Amps, 240 Volts, having breaking capacity 10 kA, 'C' characterstic complete all as specified and as directed. Make: of Legrand or equavalent to HAVELLS / SIEMENS/indoasian

M&Lof MCB TPN 40-63 Amps, 240 Volts, having breaking capacity 10 kA, 'C' characterstic complete all as specified and as directed. (Make: Indoasian or its equivalent/legrand /CG )

Supply and fixing 03mm thick hylen sheet (white colour) suitable for ceiling fan/wall plug etc all as specified and as directed.

S&F Recess mounting type fitting LED indoor luminaire powder coated, CRCA or powder coated aluminium panel 2' x 2' (Appx) system wattage 36 watt (cool white), minimum system lumen efficacy not less than 80 % , CRI not less than 80, colour temperature not less than 6000 K, power factor not less than 0.95, LED driver with constant output voltage and current at input voltage of 140volt to 285 volt AC, 50 HZ, Surge Protection>2 KV, IP protection IP 20, powder coated housing with ashthetic bottom frame, with excellent heat dissipation through high thermal conductivity, high efficiency transulence diffuser, suitable for any type of ceiling system including connection with PVC insulated copper conductor 3 core cable of 0.50 sqmm complete all as specified. (Make Havells/Bajaj/CG or Equivalent.)

Taking out burnt/damaged wire from exhaust fan 200 to300 mm motor of any make and M&L for rewinding of fans motor of any make with super enameled copper winding wire of appropriate size/same gauge as original including packing insulating material, soldering, varnishing, assembling and testing including taking down and refixing using etc of same places complete all as specified.

Taking out burnt/damaged wire from exhaust fan motor of 400 to 450 and M&L for rewinding of with super enameled copper winding wire of same size, gauge & weight including packing insulating material, soldering, varnishing, including painting capacitor ball bearing bush and certain minor repair etc assembling and testing including taking down & refixing using fastner etc. complete all as specifiedvarnishing & insulating complete all as specified and directed.

Taking down dismaintilling UNSV/Rusted fatal/damaged Exhaust Fan MS / iron body of any size and any make and repairing the following items of existing sizes.

Exhaust Fan motor copper wound suitable for 400 to 450 mm

Exhaust fan frame with nut bolts etc size 400to 450 mm sweep

Exhaust fan Louver iron shutter for size 400 to 450mm sweep along with fixing arrangement

Exhaust Fan motor copper wound suitable for 250 to 300 mm

Exhaust fan frame with nut bolts etc size 250to 300 mm sweep

Exhaust fan Louver iron shutter for size 250 to 300/450 mm sweep along with fixing arrangement

S&F of nuts, bolts & washers,nails with clamp, clips with complete set of appropriate any type of as per existing size for hanging of any type fan, geyser etc all directed by Engineer-in-Charge.

S&F fasteners size of not less than25 mm clamp with complete set of appropriate size for hanging of ceiling fan all directed by Engineer-in-Charge.

S&F of Surface mounting clamps for PVC pipe clearince saddle clamps 25/40/50 /60/75 mm complete all as specified and as directed.

S&F in replacement condenser/capacitor suitable for 230 volts single phase for exhaust fan/cabin fan/pedestal fan of capacity 3.15 mfd ISI mark including necessary connection complete all as specified.

S&F in replacement condenser/capacitor suitable for 230 volts single phase for exhaust fan/cabin fan/pedestal fan of capacity 4 mfd ISI mark including necessary connection complete all as specified.

Supply and replacement exhaust fan frame cover made out of M.S sheet of any make and size as per existing exhaust fan with suitable size of nuts, bolts & washers complete all as specified and directed by Engineer-in-Charge.

Cutting of existing wall and fixing of Exaust fan total making good plaster and white wash and suitable size of 04 Number faishner and fixing of any type exhaust fan complete all as specified and as directed .

S&F of PVC Exhaust Fan 200 mm with lovour complete all as specified and as directed.

S&F of PVC Exhaust Fan 250 mm Rust free Body ,copper motor with lovour complete all as specified and as directed.

S&F of PVC Fan 300 mm with lovour complete all as specified and as directed.

Taking down geysers of any type and any capacity due to rusting of bolts/seepage of wall and re-installation at any location including S&F in repairs of heavy duty pin type fastener 4” long and making necessary inlet/outlet electric & water supply connections from existing source to geyser complete all as specified and as directed.

S&F in repairs heating element, cup (round) type, 1.5 KW 230 volts, ISI marked suitable for 25/50 ltrs geysers of any make complete all as specified and as directed. Make : USHA/Bajaj/Recold/Venus.

Description all as per serial item No. 46.00 here-in-before but in tikona type Make : USHA / Bajaj / Recold.

S&F in repair heating element, cup (round) type, 2.00 KW 230 volts, ISI marked suitable for 25/50 ltrs geysers of any make complete all as specified and as directed. Make : USHA/Bajaj/Recold/Venus.

Description all as per serial item No. 48.00 here-in-before but in tikona type Make : USHA / Bajaj / Recold.

S&F in repair 7" thermostat switch for geysers of 25/50 ltrs capacity (ISI marked) complete all as specified and as directed. Make : USHA / Bajaj / Recold / Theta / Elcon.

S&F in repair 11" thermostat switch for geysers of 25/50 ltrs capacity (ISI marked) complete all as specified and as directed. Make : USHA / Bajaj / Recold / Theta / Elcon.

S&F in repair inner stainless-steel inner tank of 20 gauge sheet rated pressure not less than 8kg/sqcm suitable for 25 ltrs capacity geysers complete all as specified and as directed.

S&F in repair inner stainless-steel inner tank of 20 gauge sheet rated pressure not less than 8kg/sqcm suitable for 50 ltrs capacity geysers complete all as specified and as directed.

Taking down UNSV/ Rushed / fatal hot water geyser capacity 25 Ltrs / 50 Ltrs from OTM / Mess / Accn etc of any make and repairing / Installation at same location by replacement of following items-

Outer body of geyser Cap-50 Ltrs along with PV foam for heat retaining

Outer body of geyser Cap-25 Ltrs along with PV foam for heat retaining

Steel Inner tank of geyser cap-50 Ltrs, pressure rating 0.8 bar

Steel Inner tank of gyser cap-25 Ltrs, pressure rating 0.8 bar

Base plate with indicator suitable for cap-50 Ltrs

Base plate with indiactor suitable for Cap-25 Ltrs

Geyser assy suitable for Cap-50 Ltrs

Geyser assy suitable for Cap-25 Ltrs

Element suitable for Cap-50 Ltrs Geyser & 5 star rating

Element suitable for Cap-25 Ltrs Geyser & 5 star rating

Thermostate suitable for 50 Ltrs Geyser

Thermostate suitable for 25 Ltrs Geyser

S&F in repair base 09/06 Nuts assembly, compatible to existing geyser, with inlet and thermostat pipe with drain plug inclusive of clamps for holding the element with nuts, bolts and gasket complete all as specified and as directed.

S&F in repair indicator lamp for geyser of any type colour green & red complete all as specified and as directed. Make : Usha/ Bajaj/Crompton

S&F plug top 3 pin 15 Amp ISI marked complete all as specified and as directed. Make Anchor/Havells/Bajaj

S&F bottom cover of MS sheet 20 gauge suitable for 25 ltrs capacity geysers and providing a coat of red oxide to inner surface and applying one coat of synthetic enamel paint by spray painting to outer surface complete all as specified and as directed.

Description all as per ser item No 58.00 here-in-before but for 50 ltr geyser

S&F in repairs brass non-return valve 15 mm bore ISI marked screwed both ends and connecting to iron pipe in repairs complete all as specified and as directed. Make : Neta metal works/Orient/Leader/Bir.

S&F Plug socket board with metal socket and plug DP 20 Amp (I Phase, 1 Neutral and earth ) complete including taking down all as specified and as directed. (Make Legrand/ indoasian/ havells)

S&F in repairs pressure safety value confirming to relevant IS with washer suitable for 15 mm GI pipe suitable for 25/50 ltrs geysers complete all as specified and as directed. Make : Theta / Usha or equivalent

GI tubing medium grade of size 25mm bore ISI marked galvanized with all fittings such as bends, elbows, tees, check nuts, unions nipples etc for cold water pipe line complete all as specified and as directed including taking down old.

Description all as per item No 63.00 here-in-before but 20mm bore.

Description all as per item No 63.00 here-in-before but 15mm bore.

S&F in repairs of Heavy Stainless steel geyser connection pipe 304 Grade Grading for extra connection (size 18" mm) including taking down complete all as specified and as directed.

S&F in repairs of Heavy duty PVC pipe( 36" inch for geyser connection pipe for extra connection inclluding taking down complete all as specified and as directed. Make : Usha / Bajaj/ Crompton

S&F LED lights fitting Four feet 1x 20 Watt LED 6500K, 220V,AC decorative ultra slim square profile LED lighting fixture with extruded polycarbonate environmental friendly energy, with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete including taking down all as specified and directed by Engr-in-Charge.

S&F of Plug type bib taps, cast iron, screwed for iron pipe and fixed of size 15/20 mm bore dia

M&L Stop valves/angle vale 15mm , cast copper alloy, screwed down, high pressure,with crutch or butterfly handle, screwed both ends for ironpipe or for unions and fixed

M&L of single pole and earth encloser with three pin and earth plug plus neutral with socket 32/40 Amps 240Volts complete indrustial type with Tripple pole MCB complete all as specified and directed IP-30 protation

M&L in repair of Lamp holder, insulated body, cord grip pattern SP 230 volt, including taking down complete all as specified and as directed.

S&F LED light fitting mirror type with high out put diffuser 09/10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge Make Havells/philips/bajaj

M&L in repair of LED light fitting 1X10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.(Make Havells/philips/Wipro)

M&L in repair Tripple Pole and earth encloser with three pin and earth plus neutral plug with socket 63 Amps 415 Volts complete indrustial type with Tripple pole MCB complete all as specified and directed IP-30 Protation. (Make: Indoasian or its equivalent/legrand /CG )

Explosion proof point wiring for for one light/bell/buzzer with 1.5 Sqmm 1100 Volts grade PVC FRLS insulated fire retrardent multi stranded flexible copper conductor cable in and including ERW rigid steel conduit ISI marked with all flame proof conduit fittings and accessories fixed on walls/ceiling with proper fixing arrangment including one number continuous run of 1.5 Sqmm PVC insulated fire retardent solid copper conductor cable as earth continuity conductor fixed to earth terminal and metallic body of light fittings/fan and socket etc complete all as suitable for Class Zone IE Ex II C for one light point controlled by one way switch, all as specified.

Explosion proof point wiring for for one light/bell/buzzer with 2.5 Sqmm 1100 Volts grade PVC FRLS insulated fire retrardent multi stranded flexible copper conductor cable in and including ERW rigid steel conduit ISI marked with all flame proof conduit fittings and accessories fixed on walls/ceiling with proper fixing arrangment including one number continuous run of 2.5 Sqmm PVC insulated fire retardent solid copper conductor cable as earth continuity conductor fixed to earth terminal and metallic body of light fittings/fan and socket etc complete all as suitable for Class Zone IE Ex II C for one light point controlled by one way switch, including taking down complete all as specified.

Explosion proof rotary switch single pole on and off with cable termination box of 10 Amps rating 230 Volts Class E EX II C suitable for class-I, Zone-I, all as specified. Make :- Sudhir/Shyam

Supply and repair of Explosion proof rotary switch single pole on and off with cable termination box of 16 Amps rating 250 Volts Class E EX II C suitable for class I Zone I, all as specified. Make :- Sudhir/Shyam

M&L LED light fitting 40 Watt 4 Feet flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size.

S&F of Flame proof LED tube light fitting 2x40 watt 4 Feet Fitting LM-6 Construction with tube rod certified by CMRI Complete all as specified and directed

Supply laying, connecting and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, of size 35 sqmm 3.5 core laind in trenches or passing through pips/ ducts complete all as specified and directed by Engineer in charge

Supply laying, connecting and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, of size 25 sqmm 3.5 core laind in trenches or passing through pips/ ducts complete all as specified and directed by Engineer in charge

S&F Flame proof with explosion protection MCB distribution board encloser single pole & neutral 240 volts 12way complete with appropriate size bus bar and neutral link suitable for class 1 Zone 1 & Ex IIC suitable for & including following accessories : (i) MCB TPN 63 Amps with rupturing capacity 16 KA - 02 Nos (Incoming ) (ii) MCB SP 32 Amps with rupturing capacity 10KA - 02 Nos (iii) MCB SP 6 Amps with rupturing capacity 10KA - 01 Nos (iv) MCB SP 16 Amps with rupturing capacity 10KA - 01 Nos Make :- Sudhir or equivalent in shyam

Earthing complete with Galvanised steel earth plate electrode of size 60 cm x 60 cm x 3.15 mm thick as earth burried directly in ground (earth pit not less than 2.25 Meter deep below ground level) with top edge of the earth plate not less than 1.5mtr below ground level using copper earth lead wire 4.0 mm dia as earth continuity conductor connected to earth plate by means of copper thimbles, nuts, bolts, washers including jointing of earth electrode and earth wire by means of welding, all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and pit cover made of MS sheet 2 mm thick duly fixed to angle iron frame with hinges of appropriate size by welding and having locking arrangement, adequate quantity of charcoal dust and salt all around the earth plate, earth work in any type of soil , removing surplus excavated material all as required at site and as specified in EP No 3 of MES SSR Part-I (2009) directed by Engineer-in-charge including testing on completion.

S&F of Earth continuity conductor or main4mm Galvanised iron wire fixed to wall on battenor recess or chases including or drawn in conduit/pipe or fixed to poles or any other indicatedsituation for loop earthing etc complete all as specified and as directed

S&F of 2core 6 sqmm aluminium conductor cable complete all as specified and as directed

S&F of MCCB 4P 100 Amps /415Volts ,having breaking capacity with complete accessories as per existing suitable size complete all as specified and as directed

S&F of Earth continuity conductor or main4mm Galvanised iron wire fixed to wall on battenor recess or chases including or drawn in conduit/pipe or fixed to poles or any other indicatedsituation for loop earthing etc. Complete all as specified and as directed

RANBIR ENTERPRISES

s l sharma and sons

DAVINDER SINGH

PARAS RAM ASGOTRA AND SONS

M/S RAJINDER SINGH