COMPREHENSIVE MAINT INCL E/M TO CERTAIN OTM AND MD ACCN IN JP LINE, TPT LINE AND OFFICERS ACCN UNDER AGE B/R-I AT CITY AREA ALWAR

Amount

Disconnecting & dewatering of PVC overhead tanks, scrubbing the inner surfaces, cleaning & removing all scales, dirt etc.from mouth of circulating pipes, washing the tanks with fresh water and disinfecting the same by flushing with liquid chlorine or any other equivalent chemical, reconnecting & refixing in position after cleaning for tank capacity n exc. 500 ltrs each including marking the date of cleaning with white paint & stencil all as required & directed.

All as per srl item No 1.00 above but exc 500 ltr & n exc 1000 ltrs capacity.

Checking of joinery (wooden/steel) iron/aluminium mongery, pelmet box, door springs etc requiring carpentry work and carrying out minor repairs such as tightening of screws/nails, minor adjustment of joinery, door resecuring and door easing etc. including petty repairs material like screws/nails, plug etc. to make it functional. Note: Any items required to be replaced shall be paid under respective items and in that case this items shall not be measured and paid.

S&F in repairs MS conduit pipe bright finished 19/20mm dia as in curtain rod including suitable brackets for pelmet box complete set all as specified and directed

S&F in repairs powder coated stainless steel drapery rod of 20 mm inner dia (in lengths as directed) of approved colour with & including decorative bowel at both ends and pair of powder coated mild steel brackets fixed at both ends with PVC rawl plug & steel screws on walls/beam, including PVC curtain rings of matching colour @ 10cm C/C all as specified & as directed.

Hacking out old broken glass of any thickness/size of any description from steel frame fixed with clips and putty and S&F with 4mm thick ordinary sheet glass fixed with clips and putty completed in squares not exc 0.50 Sqm each pane all as specified and as directed.

All as per srl item No 6.00 above but 4mm thick figured glass, pin head type.

Hacking out old broken glass of any thickness/size of any description from aluminium/ steel frame and M&L 5.5mm thick Sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sq. m in each pane complete all as specified.

All as per srl item No 8.00 above but exc 0.5 sq. m in each pane complete all as specified.

S&F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.

S&F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed tinned tacks or GI wire stampe or nails and screws complete all as specified

S&F in repairs 0.56mm thick aluminum sheet with nails to door shutters all as specified.

Taking down carefully anodized aluminium doors/windows/ventilators frame including glazed shutters & builder’s hardware complete of any size and any description and refixing in the same opening after carrying out necessary repair & replacement of unserviceable components / hardware to make it fully functional complete all as specified & as directed. Notes :- (i) Quoted rate shall deemed to include supply & fixing of new joining cleat, aluminium beading, glazing clips, rubber packing, stays including cutting of old styles etc & adjusting the same appropriately as directed. (ii) Glazing, new aluminium sections for frame/shutters, builder’s hardware such as handles, hinges, door closure, floor door spring shall be measured & paid for separately. (iii) Loose corner joints of frame & shutters shall be tightened by providing suitable cleats made out of aluminium angle of appropriate size fixed with nut & bolts to make the joints at 90º.

S&F in repairs door closer hydraulically regulated, designation No. 3, aluminium (Die cast) body, universal type (ISI marked), fixed in repairs, complete all as specified & as directed.

M&L for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, fixed in repairs, with & including replacement of floor tiles if any broken during repair work and making good disturbed surfaces matching to the existing surfaces complete all as directed fixed in repairs.

Supply and fixing in repairs brass mortice lock, vertical type, size 65mm, 4 Levers with escutcheon plates & two keys fixed in aluminium frame complete all as specified.

Supply and fixing in repairs MS helical door spring 300mm size with roller base plate fixed to wooden or steel frames with welding etc complete all as specified.

Supply and fixing in repairs 100mm long aluminum anodised hasp and staple complete all as specified.

S&F in repairs 300mm long aluminium alloy anodised sliding door bolt with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section of cast aluminium and fixed all as specified

All as per srl item No 19.00 above but 150mm long.

Supply and fixing in repairs aluminum anodised handle 100mm long complete all as per IS.

All as per item No 21.00 above but 150mm long.

Supply and fixing in repairs 200mm long aluminum, anodized barrel tower bolts of extruded section all as specified.

All as per item No 23.00 above but 150mm long.

Supply and fixing butt hinges 100mm long medium weight cold rolled MS fixed in repairs to pressed steel/angle iron frames by welding all as specified.

S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed overall length 140 mm complete all as specified & directed.

Running welding in repairs not exceeding 6mm thick all as specified and directed

Welding in repairs not exceeding 6mm thick and not exceeding 2.5 cm in length all as specified and directed

Cutting holes in stone/brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 n exc 1 brick wall

Checking and attending to water leakage from taps, flushing cisterns, wash hand basins & other water supply fittings/fixtures and any obstruction to water supply in rooms, requiring plumber work, clear air lock and carryout minor repairs such as replacement of washers, check nuts, tightening of fittings of flushing cistern etc including petty materials like washers of all sizes, thread(soot), M-Seal, screws, nails to make water supply/plumbing lines functional and leak proof. Note: - Any item required to be replaced shall be paid under respective item and in that case this above item shall not be measured and paid.

M&L for water supply fittings/fixtures i.e. GI nipple, tank nipple, socket, union, elbow, tee, reduser of any size as per complaint for water leakage from taps, flushing cistern and other articles complete all as specified and directed

M&L for repair to leakage in floors of WC/Bath room/Kitchen by breaking of existing floor and providing new PVC (SWR) floor trap, suitable for type B pipes 75mm dia of outlet, plain with grating incl jointing with solvent cement and making good floor to match with existing floor all as directed

M&L for Cement patch work on wall/floor etc area n exc 1 sqm and depth n exc 15cm each complete all as specified and directed

M&L for filling of joints of tiles for WC/WHB corner/floor with white cement area n exc 1 sqm each complete all as specified and directed

Taking up or down 15mm steel tubing and connections, including cleaning for re-fixing or removal to store

Taking up or down 20mm steel tubing and connections, including cleaning for re-fixing or removal to store

S&F steel tubing medium grade 15mm bore with all fittings fixed complete to wall and or laid in floor all as specified.

S&F steel tubing medium grade 20mm bore with all fittings fixed complete to wall and or laid in floor all as specified.

S&F Rotational moulded polyethylene water storage tanks( white colour) (cylindrical vertical with closed top) of capacity 500 Ltrs hoisted and fixed in position inc all necessary fittings(nipple,socket,union etc)complete all as specified in SSR Part I including dismantaling existing water tanks and removing to store, complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks( white colour) (cylindrical vertical with closed top) of capacity 1000 Ltrs hoisted and fixed in position inc all necessary fittings(nipple,socket,union etc)complete all as specified in SSR Part I including dismantaling existing water tanks and removing to store, complete all as specified and directed.

S&F in repairs ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed of 20mm dia, minimum weight - 210 gms of including taking down existing ball valves any type all as directed

S&F in repairs brass Gun-metal, globe or gate valves 20mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (Pedestal pattern EWC), coloured, floor mounted coupled closet, including connection to drain (or outgoing pipe), anti-sypohonage pipe etc, with & including WC seat cover coloured closed pattern with flat bottom and cover, CP jet nozzle, vitreous china symphonic action type twin flush flushing cistern of 10 litre capacity with lid, necessary fittings complete all as specified & as directed.

S&F in repair Vitreous China Squatting pan, Orissa pattern, size 580 x440mm white with integral foot rests connection to trap and to flushing pipe, etc. complete including making good to floor complete all as specified & directed

S&F in repair vitreous china wash down water closet pan (Pedestal pattern), white including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc. & with plastic WC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified & as directed.

S & F in repair vitreous china wash basin with pedestal , white, flat back, size 550 x 400 mm including one no 15mm bore fancy type mixer taps with hot & cold, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered HOT or COLD with long screwed shanks and fly nuts, screwed for iron pipe, one No PVC waste pipe 25 mm dia and 75 cm long with 32 mm dia connector, 32mm size waste fittings, brass chromium plated with long screwed shanks and fly nuts, flange end, bedded in red lead cement and other fixed and PVC connection 15 mm dia & 600mm long with two Nos check nut and washer complete including cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed.

S&F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) alongwith preader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified & directed

S&F in repairs vitreous china wash basin white of size 550x400mm (ISI marked) flat back or angle back type excluding taps, waste chain & plug but incuding cast iron brackets and cutting for and pinning in ends of brackets or erecting stand complete fixed in repairs all as specified and directed.

S&F in repairs Jet spray chromium plated brass for EWC with & including PVC connection 600 mm long suitable for 15 mm bore GI pipe with PTMT nut & nipple complete.

S&F in repairs PVC low level flushing cistern 10 litrs capacity (white ISI marked) with inlet ball valve, float and handle, syphonic action type including brackets and flush pipe of polythelene of low or high density of PVC 32mm dia for LLFC complete all as specified.

S&F in repairs PVC connection of 15mm bore with 2 Nos. PTMT nuts, 45cm long fixed with one end to pillar tap & the other end to stop cock or iron pipe all as directed

S&F in repairs pipe of polyethylene of low or high density of PVC 32mm dia for low level cistern including all joints all as specified.

S&F in repairs PVC internal fittings (kit) complete for low level flushing cistern tank, all as specified and directed

S&F in repair towel rails of 20mm dia tubular brass chromium plated 60cm long 'D' type fixed to all as directed

S&F in repair plastic water closet seat cover white closed pattern with flat bottom and mild steel CP or aluminium hinging device complete.

Supply and replacement in repairs of spindles, phases of brass of any size required for bib taps, pillar cocks, stop cocks, angle valves, concealed valves complete all as directed.

S&F in repair Grating doom 100 mm dia of PTMT (Minimum weight 25 gms) fixed with cement complete all as specified & directed

S&F in repairs Pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore all as specified

S&F in repairs fancy type 3-Hole Basin Mixer without popup waste system but including plain waste 32mm size with aerator complete cast copper alloy, chromium plated, screwed down high pressure, with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore.

S&F in repairs brass chromium plated wall mixer for mixing hot & cold water screwed down for iron pipe of 15mm bore all as specified and as directed.

S&F in repaier brass chromium plated shower rose 100mm size with swivel joint type including fixing to steel pipe of 15mm bore or union complete all as specified.

S&F in repair Toilet paper holder of brass, chromium plated fixed to walls with chromium plated (CP) brass screws.

S&F in repairs.sink with draining board made out of stainless steel 1mm thick sheet for kitchen with plug, washers, waste pipe, cast iron centilever bracket, connecting union over all minimum size 915mmx460mm with bowl size 410mmx330mmx160mm complete all as specified and directed

S/F in repair kitchen sink without draining board made out of stainless steel 1mm thick with plugs, washers and waste pipe including bedding in cement mortar to dwarf wall or including and fixing cast iron cantilever brackets and connecting union to pipe over all size 495x420 mm bowl size 410x330x160 mm including flush pipe of polyethylene of low or high density or PVC 32mm bore with long screwed shanks and fly nuts complete all as specified & directed

S&F Stainless steel plate rack, 1.00mm thick for kitchen size 600x900x230mm complete all as specified & directed by Engr-in-Charge.

S&f in repairs 32mm dia waste fittings, brass CP for glazed ware sinks, basin etc with long screwed shanks and fly nuts, flange and based in red lead cement and other and fixed all as specified.

All as per srl item No 66.00 above but 40mm dia.

S&F in repairs Mirror cabinet PVC frame of size 400 x 500 mm fixed to wall with rawl plug & stainless steel suitable size screws complete all as specified and direceted.

S&F in repair Looking mirror 5mm thick including cutting, grinding, polishing and chamffering of edges of glass, fixed with and including 20mm dia fancy type stainless steel fixers- 04 Nos complete fixed to wall all as directed

S&F in repair bib tap cast copper alloy with crutch or butter fly handle 15mm bore fancy type chromium plated complete all as specified

S&F in repair bib tap cast copper alloy with crutch or butter fly handle 15mm bore chromium plated complete all as specified

S&F in repair bib tap standard of PTMT any colour 15mm bore high pressurescrewed for iron pipe (Min. wt 90 gms) complete.

S&F in repairs 15mm bore Stop valve, fancy type with long shank and cup (concealed type) of cast copper alloy chromium plated, screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union.

S&F in repairs 15mm bore Stop valve/angle valves,fancy type chromium plated cast copper alloy screwed down high presure, screwed both ends for iron pipe or for unions.

S&F as in repair 15mm bore 2 way angle valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.

S&F in repair chromium plated health faucet for EWC with including PVC Connection 1m long suitable for 15mm bore with all connected fittings.

S&F in repair PVC water storage tank lid for cap 500 ltrs tighten with suitable size of nut bolts with spilt pin.

S&F in repair stainless steel cloth hanger size of 300mm long with minimum 8 to 10 hooks each complete all as specified & directed.

S&F in repair PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified & directed

S&Fin repair PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed

S&Fin repair PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed to walls/floor complete all as specified & directed

S&F in repair PVC (SWR) bends any radius 110 mm bore complete all as specified & directed

S&F in repair PVC (SWR) vent cowl 110mm complete all as specified & directed

S&F in repair 75mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified & directed

S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified & directed

S&F in repair PVC (SWR),110mm junction single, (Single T) equal or unequal complete all as specified & directed

Taking down plaster in cement mortar over walls/ceiling including racking out joints & hacking for keys.

M&L rendering 10mm thick in cement mortar 1:6 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified.

M&L for rendering 15mm thick in CM 1:4 on brick/stone wall surfaces or other than fair faces of brick work & surfaces finished even and smooth without using extra cement with water proof compound (WPC will be measured and paid seperately) all as specified.

M&L rendering 5mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified.

M&L for preparation of new Plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening of approved make all as specified and directed

Preparing newly plastered surfaces of walls & applying two coats of cement base paint complete all as specified and directed.

M&L for preparing newly pastered surfaces & applying three coats of white wash on ceiling all as specified.

M&L preparation of old decorated surfaces of walls by washing, rubbing down and stopping of distempered surfaces and applying one coat of oil emulsion distemper (OBD) of approved shade/tint all as specified & as directed.

M & L for complete removal of existing treatment on walls and preparation of surfaces of walls and applying two coats of oil bound distemper (OBD) over a coat of 1 mm thick birla care putty complete all as directed.

M&L preparation of old decorated plastered surfaces of walls and applying one coat of cement base paint of approved shade/tint complete all as specified & as directed.

M&L for brooming down old decorated surfaces of wall, plastered or unplastered including cornices, pilasters etc and applying two coats of white wash, complete, all as specified and directed.

M&L preparation of old decorated plastered/unplastered surfaces of ceilings & applying one coats of white wash complete all as specified..

M&L for brooming down old decorated surfaces of wall, plastered or unplastered including cornices, pilasters etc and applying one coat of colour wash, complete, all as specified and directed.

M&L preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified.

M&L preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified.

M&L complete removal of existing treatment on walls and preparation of surfaces of walls and applying two coat Plastic emulsion paint on walls complete all as specified & directed.

M & L for complete removal of existing treatment on walls and preparation of surfaces of walls and applying two coat of exterior emulsion apex paint (exterior grade) over one coat primer on walls complete all as specified & directed.

S&F in repair teak wood lipping 6mm thick fixed with nails to 18/19mm thick block board or veneered particle board complete all as specified

S&F in repair 6mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work etc including taking down existing frame work complete all as specified & directed

S&F in repair 18/19mm thick Prelaminated particle board, interior grade, prelaminated one side with deocrative choice lamination & other side balancing white lamination, fixed with screws to timber frame work etc. including taking down existing frame work complete all as specified & directed

S&F 75mm extruded brass handles, fabricated type polished complete all as specified & directed

S & F Width of flaps (when open) 40mm Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified & directed

S&F in repair for pressed steel shutter 1mm thick including pressed steel frame of 1.25 mm thick sheet, 12mm dia MS rod for locking, two Nos chromium plated handle and one Godrej pattern lock including two coat of spray painting over a shop coat of primer, complete, all as shown in Drg No. TD/2004/29 sheet No. 1/3 to 3/3

Supply and fixing in repairs brass chromium plated godrej pattern cupboard lock, vertical type, in any size with escutcheon plates & two keys fixed in preseed steel cupboards complete all as specified.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thickness (below or above ground level.) & removing unserviceable materials in low laying area, complete, all as directed

M&L for 25 thick cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in levelling coarse for tiles.

M&L Vitrified Ceramic tiles 10 mm thick in light shade(square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick cement screed in cm 1:6 complete all as specified and directed.

M&L Non Skid Coloured ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cm 1:4 complete all as specified.

M&L machine cut kota stone slab flooring 18-19mm thick over 20 mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified& directed

M&L for 40 mm thick PCC 1:2:4 type B -1 using 20 mm graded aggregate as in flooring complete all as specified & directed

S&F plastic dividing strips, 1.5 mm thick and 38mm width inserting in position conform to position complete all as specified

M&L 75 mm thick PCC(1:3:6) type C1 (using 20mm graded stone aggregate ) as in plinth protection finished fair and even complete all as specified& directed

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to stores and rubbish off premises all as specified.

M&L Glazed ceramic coloured tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles and over 10 mm thick rendring in cm 1:4 complete all as specified & directed

M&L Glazed ceramic tiles in vertical surfaces 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, in wall, dado, skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over 10 mm thick rendring in cm 1:4 complete all as specified & directed

M&L machine cut kota stone slab 18-19mm thick in steps for riser, dado, skirting, wall etc over 15 mm thick cement plaster in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified& directed

M&L for 18/19mm thick Granite slab of approved shade, as in platform etc, bedded & jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with shade of Granite stone including cutting, grinding and polishing (mirror polish i.e. full granite polish as per local trade practice) including required cutting to suit the size of oval type wash hand basin over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.

M&L Precast cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) set in cement mortar 1:6 as in coping of brick masonry wall kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin) corbels, brackets, etc. including weathering slightly rounded or chamfered angles and throating as directed including necessary formwork complete all as specified& directed

M&L for Providing precast cement concrete louvres and jallies, 25mm thick (measured solid), including all mould- ings but excluding frame set in cement mortar Set in cement mortar 1:4 (type B-0 1:2:4) 12.5mm agregate complete all as specified& directed

Dismantling framed timber scantlings 40 sq. cm and over in section, in any position complete all as specified.

S&F MS steel work in tubular trusses and tubular posts, purline, rafter including special shaped washers etc., complete using but welded. RHS/SHS confirming to IS 4923 : 1997 complete all as specified & directed

M&L for Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 W (Gde E-250) Quality B ,complete all as specified & directed

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified & directed

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified & directed

M&L 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with L & J type hook and cranked complete all as specified.

M&L for PCC Type D2 1:4:8 (40 mm graded stone aggregate) Cement concrete in foundations, filling and mass-concrete complete all as specified & directed

Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonry and removal complete all as specified& directed

M & L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and directed.

S&F in repair mild steel solid rubber beading of 20 to 40mm wide and 2 to 4mm thick fixing at bottom to existing doors complete all as specified and directed

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets/AC boards, any thickness, including cover fillets and removing from site all as specified.

M&L False ceiling with ArmGyp-FB ceiling tiles of 595 x595 (as approved by GE) fixed with and including galvanised iron powder coated inverted "T" or "L" section (concealed GI frame work) of mettalic or equivalent suspended from ceiling with provn of galvanised wire 4 mm dia and wall taping screw including butterfly clip, hold down clips for fixing the board to frame complete all as per manufacurers instructions all as directed and specified. (a) size of main tee 39 x 24.4 x 0.8 mm (b) size of wall angle 22.2 x 22.2 x 0.65 mm (c) size of grid 0.61 x 0.61 mm

M&L for false ceiling with Armgyp-FB ceiling tiles of size 595 x 595mm, 9mm thick (as approved by GE) fixed with existing frame work fixing the board to frame complete all as per manufacurers instructions complete all as directed and specified.

S&F Solid PVC Wall Lining consisting of 5mm thick decorative colour laminated PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

Taking down Chowkatts or frames with shutters ( without taking off shutters from the frame) n exc 1.5 sq.each & removing to store.

Taking down Chowkatts or frames with shutters ( without taking off shutters from the frame exc 1.5 sq. m but n exc 4 sq m each & removing to store.

Taking down Shutters of any description exc 1 sq. m but n exc 2 sqm each & removing to store.

S&F 35mm thick IInd class hard wood factory made panelled door shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. the size of rail and stiles as per IS: 1003 (part-I), kiln seasoned and chemically pressure treated and fixed to chowkats complete all as specified& directed

S&F 35 mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a); supplied and fitted to chowkats complete all as specified& directed

M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

M&L Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified& directed

M&L Factory made solid skelton wire gauzed moulded pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail but wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmlycomplete all as specified& directed

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified & directed

S&F Butt hinges 100mm long medium weight, colled rolled mild steel complete all as specified& directed

S&F 150mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified & directed

S&F 150mm Aluminium handles, cast type, anodised complete all as specified & directed

M&L for preparation of new wooden surfaces over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified& directed

S & F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanized wire staples complete all as specified and directed.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete & making good the floor in PCC 1:2:4 type B-0 to match the existing floor.Fe-410 (Gde-E250 quality A).

Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed

S&F anodized aluminium frame and other sections for doors, windows, ventilators, partitions, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified & as directed.

S&F anodized aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos), suitable handle (1 No.) complete all as specified & as directed.

S&F anodized aluminium door shutters, aluminium section weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodized aluminum snap beading screws etc. complete all as specified & as directed.

S&F for powder coated of any colour as approved anodised aluminium grill of approved pattern for windows/ ventilators/doors complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.

S&F sheet glass ordinary quality,in squares n. exc. 0.5 SQM each 4.80 mm thick complete as directed

S&F factory made steel windows with side hung shutters including projecting type box hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded including one shop coat of Zinc chromate primer.

All as per srl item No 166.00 but without glazing bars

S&F steel ventilator with top hung shutter including hinges steel peg stay complete including taking down.

S&F 3mm thick ordinary sheet glass fixed with clips and putty completed in squares not exc 0.50 Sqm each pane all as specified and as directed.

S&F M.S. frame work such as grills, gratings, angle frame etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, cooler stands and similar work conforming to Fe.290.Gde-E-165 a oat of red oxide primer after preparation of steel surfaces complete all as specified.

M&L for fixing in repair vitreous china wash basin any size incl cutting pinning for and pinning in ends of brackets or erecting stand and refixing in the same wash basin complete all as specified and directed

Demolition Mud in roofs, any thicknes, including plastering , existing tretement and cleaning (whether full thickness removed or only or part there of) etc in all respect and preparing it for further treatment and taking out and disposal of debris & rubbish to a distance exc 1 Km but not exc 1.5 Km complete all as specified & directed

M&L for PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) as in roof padding, laid to a minimum consolidated thickness of 25 mm as leveling course, laid and compacted in min slope 1:30 over roof complete all as specified& directed

M&L screed laid 15mm thick in CM 1:4 with water proofing compound over green concrete surface(WPC will be measured and paid seperately) surface finished even and smooth (without using extra lime or cement) complete all as specified& directed

M&L Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq. m including cleaning surfaces over bituminious primer complete all as specified& directed

M&L APP based plymeric membrane minimum weighing 3 Kg/Sqm and minimum 3 mm thick reinforced with polyster non woven fabric (wt not less than 150 gms/sqm) land on primed surface by forced application complete all as specified.

Supply only Integral waterproofing compound

M&L for providing and injecting chemical emulsion for post constructional anti termite treatment alongwith the external wall below concrete or masonry apron using chemical emulsion at the rate of 2.25 litre peri linear meter incl drilling and plugging 12mm dia holes with CM 1:2 to match the existing floors drilling and plugging holes etc all as specified and directed

M&L for providing and injecting chemical emulsion for post constructional anti termite treatment of soil under existing floor using chemical emulsion 300mm apart incl drilling and plugging 12mm dia holes with CM 1:2 to match the existing floors using emulsion @ 1 litre per hole complete all as specified and directed

M&L for providing and injecting chemical emulsion for post constructional anti termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same with CM 1:3 & painted with white or coloured paint all as specified and directed

Rectifying the defects in LED/ fluroscent tube light fittings/wall security light fitting/flood light fittings/CFL fittings/Building security lights any type/capacity/any shape/position and at any height by tightening loose connections and rectifying defects and made serviceable including testing complete all as directed.

Opening switch mounting plate at normal height upto 1.5 mtr, rectifying the defects in fittings and fixtures such as switches, bell push, fan regulator, sockets etc by tightening loose connections, refixing switch plate and testing complete all as directed. NOTE for Item 1.00 & 2.00: The unit rate quoted shall be deemed to be included the elements of labour only for rectifying and making the fitting and fixtures functional. If replacement of parts/items is required to make the fittings functional, the cost for labour and material for the same will be measured and paid for under relevant items of this schedule hereinafter and in such cases the above items will not be measured and paid for.

Taking down carefully copper/Aluminium point wiring of light/fan/socket/power point and including existing/old conduits / PVC casing caping and making good disturbed surfaces of walls/ ceilings complete all as specified & directed.

M&L for point wiring One light point controlled by one, one way switch in casing/caping with Two single core, PVC insulated ,unsheathed FRLS, multistranded copper conductor cable/wire of size 1.5 sqmm,1100 Volts grade along with one single core PVC insulated, unsheathed, FRLS with multistranded copper conductor cable/wire of size 1.5 sqmm 1100 volts grade as continuous earth wire, green in colour confirming to IS-694/1990 connected from fittings to common earth dolly in & including S&F PVC casing & caping/in concealed conduit of suitable size as directed with its accessories and also including S&F wooden switch boards fixed on wall and 3mm thick phenolic laminated sheet top cover for mounting of switches, sockets, regulators etc. all as specified and directed by Eng-In Charge. Note : The quoted rates are included for cutting and chasing in walls, including making good to disturbed surfaces of concealed wiring.

All as per srl item No 184.00 but for One light point controlled by one, one way switch in concealed pvc conduit.

All as per srl item No 184.00 but for one fan point controlled by one switch and regulator in casing/caping.

All as per srl item No 184.00 but for one fan point controlled by one switch and regulator in concealed pvc conduit.

All as per srl item No 184.00 but for one exhaust fan point controlled by one switch in casing/caping.

All as per srl item No 184.00 but for one exhaust fan point controlled by one switch in concealed pvc conduit.

All as per srl item No 184.00 but for one bell/buzzer point controlled by one bell push in casing/caping.

All as per srl item No 184.00 but for one bell/buzzer point controlled by one bell push in concealed pvc conduit.

All as per srl item No 184.00 but for one light point controlled by two, two way switches in casing/caping.

All as per srl item No 184.00 but for one light point controlled by two, two way switches in concealed pvc conduit.

All as per srl item No 184.00 but for one 3 pin socket outlet 5 Amps controlled by one switch 5 Amps on same board.

All as per srl item No 184.00 but for one 3 pin socket outlet 5 Amps controlled by one switch 5 Amps on independent board in casing/caping.

All as per srl item No 184.00 but for one 3 pin socket outlet 5 Amps controlled by one switch 5 Amps on independent board in concealed pvc conduit.

All as per srl item No 184.00 but for one 3 pin 15 Amps socket outlet controlled by one 15 Amps switch on independent board with 2.50 Sqmm two single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 volts grade including 2.50 sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 volts grade as continous earth wire in green colour confirming to IS-694/1990 in PVC casing/caping.

All as per srl item No 197.00 but in concealed pvc conduit.

All as per srl item No 184.00 but for but for one power point on independent board with 4.00 Sqmm two single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 volts grade including 4.00 sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 volts grade as continous earth wire in green colour confirming to IS-694/1990 in PVC casing/caping.

All as per srl item No 199.00 but in concealed pvc conduit.

S&F switch piano flush type single pole one way 5 Amps 230 Volts .

S&F switch piano flush type single pole two way 5 Amps 230 Volts .

S&F switch piano flush type single pole one way 15 Amps 230 Volts .

S&F socket outlet for 2 & 3 pin 5 Amps flush type 230 Volt.

S&F socket outlet 2 in 1, 3 pin 5 and 15Amps flush type 230V.

S&F bell push flush type 5 Amps 230 Volt.

S&F bell Ding Dong Music type AC 230 volts single pole.

S&F lamp holder PVC/Polycarbonate type with back plate suitable for angle fittings.

S&F ceiling rose surface bakelite 65/30 mm three terminals.

S&F new fan regulator electronic stepped up type piano socket type flush type and connecting up, ISI marked 120 Watts, 230 Volts.

S&F switch piano flush type single pole one way 5/6 Amps 230 Volts Modular type.

S&F switch piano flush type single pole one way 15/16 Amps 230Volts Modular type .

S&F socket outlet for 2 & 3 pin 5 Amps flush type 230 Volt Modular type.

S&F socket outlet 2 in 1, 3 pin 5 and 15 Amps flush type 230 V Modular type.

S&F PVC Modular white cover plate with base frame,2 module.

S&F PVC Modular white cover plate with base frame plate 3 module.

S&F PVC Modular white cover plate with base frame plate 4 module.

S&F PVC Modular white cover plate with base frame plate 6 module.

S&F PVC Modular white cover plate with base frame plate 8 module.

S&F new fan regulator electronic stepped up type piano socket type flush type and connecting up ,ISI marked 120 Watts, 230 Volts,modular type ,2 module.

S&F decorative ultra slim liner LED lighting fixture with extended polycarbonate 20 Watt with LED tube and connecting up with and including white coloured round three core ,PVC insulated ,sheathed copper conductor cable of required size and length from ceiling rose to fitting and as directed .Make -Havells or equivalent of Phillips,CG,Bajaj including dismantling of old FTL fittings.

S&F decorative ultra slim square box profile liner LED lighting fixture with extended polycorbonate, environmental friendly ,energy efficient all including LED tube 9 watt,6000K to 6500K of Model ELITE LED PRIDE and connecting up with and including white coloured flat/round twin core PVC insulated, PVC sheathed copper conductor cable of required size and length, from light fitting to ceiling rose specified & directed. Make;-Havells Cat Part No.LHEXBLP7IN1W009 or equivalent of Phillips /CG/Bajaj

Fixing only any type and any size LED light fitting on wall / ceiling including S/F white coloured round three core ,PVC insulated ,sheathed copper cable of required size and length from ceiling rose to fitting complete with all standard fitting .

S&F sheet metal enclosure double door type suitable for fixing MCB's, TPN 4 way, 415 Volts and including taking down old U/S DB ,TPN,4 way complete all as specified & directed.

S&F sheet metal enclosure double door type suitable for fixing MCB's, TPN 8 way, 415 Volts and including taking down old U/S DB ,TPN, 4/8 way complete all as specified & directed.

S&F sheet metal enclosure double door type suitable for fixing MCB's, SPN with 200 Amps rated bus bar,8 way, 230 Volts and including taking down old U/S DB ,SPN,8 way complete all as specified & directed.

S&F sheet metal enclosure double door type suitable for fixing MCB's, SPN with 200 Amps rated bus bar,4 way, 240 Volts and including taking down old U/S DB ,SPN 4way complete all as specified & directed.

S&F sheet metal enclosure single door type suitable for fixing MCB's, SPN without busbar 2 way, 230 Volts and including taking down old U/S DB ,SPN 2way complete all a specified & directed.

S&F MCB 32 Amp, single pole & neutral, 230 Volt & including taking down old U/S MCB complete all a specified & directed.

S&F MCB 6 to 32 Amp, single pole 230 Volt & including taking down old U/S MCB complete all a specified & directed.

S&F MCB 32 to 63 Amp, triple pole & neutral, 415 Volt & including taking down old U/S MCB complete all as specified & directed.

S&F 2nd class H/W rectangular block open recessed of size 45 x30 X 5 cm depth fixed with suitable screws & PVC rawl plug (4 Nos) for DB complete all as specified and directed.

S&F 2nd class H/W rectangular block open recessed of size 30 x25 X 5 cm depth fixed with suitable screws & PVC rawl plug (4 Nos) for DB comlpete all as specified and directed.

Supply, installing and testing out door wheather proof bus bar chamber of size 60cmx40cmx40cm made out of 3.15mm MS sheet having one side openable hinged door shutter with locking arrangement & provn of two Nos 60cm long 40x40x6mm angle iron legs welded and 4 Nos Aluminium bus bar of 200 Amp rating and incoming MCCB 63 Amps adjustable thermal magnetic release type complete errected on ground with necessary PCC 1;3;6 type C-2 foundation complete bus bar chamber painted with two coats of approved enamel paints over one coat of primer including making cable connection with necessary gland ,lugs/thimbles complete all as specified and directed.

S&F sub main wiring in and including PVC conduit with PVC flexible copper conductor unsheathed multistranded two single core cable of size 6 Sqmm and coninuous earth with PVC flexible cable copper conductor unsheathed multistranded single core of size 6 sqmm of green colour confirming to IS-694/1990 including taking down existing unserviceable sub main wiring (Two runs of cable with one run of earth wire shell be measured as one length) incl taking down old submain wiring complete all as specified & directed.

S&F sub main wiring in and including PVC conduit with PVC flexible copper conductor unsheathed multistranded two single core cable of size 4 Sqmm and coninuous earth with PVC flexible cable copper conductor unsheathed multistranded single core of size 4 sqmm of green colour confirming to IS-694/1990 including taking down existing unserviceable sub main wiring (Two runs of cable with one run of earth wire shell be measured as one length) incl taking down old submain wiring complete all as specified & directed.

S&F sub main wiring in and including PVC conduit with PVC flexible copper conductor unsheathed multistranded four run single core cable of size 6 Sqmm and coninuous earth with PVC flexible cable copper conductor unsheathed multistranded two run single core of size 6 sqmm of green colour confirming to IS-694/1990 including taking down existing unserviceable sub main wiring (Four runs of cable with two run of earth wire shell be measured as one length) incl taking down old submain wiring complete all as specified & directed.

S&F sub main wiring in and including PVC conduit with PVC flexible copper conductor unsheathed multistranded four run single core cable of size 10 Sqmm and coninuous earth with PVC flexible cable copper conductor unsheathed multistranded two run single core of size 6 sqmm of green colour confirming to IS-694/1990 including taking down existing unserviceable sub main wiring (Four runs of cable with two run of earth wire shell be measured as one length) incl taking down old submain wiring complete all as specified & directed.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with 01 No. single pole MCB 20 Amps & including taking down old U/S enclosure complete all as specified & directed .

S&F recess 36/40 watt ultra slim edge 2x2 feet lit panel in aluminium casing recess mounted square fixture in white finish suitable for low ceiling height ,3in1,3K,4K,6K with & including LED prewired & connecting up & dismantling of old U/S recess mounted light. Make- Shakti cat part No-SZRSRMX036-IC or equivalent make of Havells, Bajaj, crompton

S&F MCCB 4 Pole,100 Amps rating rupturing capacity 25 KA ,415 volts grade AC,50 HZ magnetic fixed type and making connections including disconnecting & taking down old U/S ,MCCB complete ,all as specified and directed.

S&F MCCB 4 Pole, 63 Amps rating rupturing capacity 16 KA ,415 volts grade AC,50 HZ magnetic fixed type and making connections including disconnecting & taking down old U/S ,MCCB complete ,all as specified and directed.

Disconnecting electric connections and taking down existing electric meter from wooden board ,and S&F new wooden board of size and Reconnecting ,Refixing existing meter to the location as specified & directed.

S&F On load Changeover switch front operated 100 Amp ,AC ,3 Phase 4-pole 415 volts, including taking down old U/S changeover switch Make : Crompton Greaves / Havells/HPL

S&F On load Changeover switch front operated 250 Amp ,AC ,3 Phase 4-pole 415 volts, including taking down old U/S changeover switch Make : Crompton Greaves / Havells/HPL

S&F switch piano flush type single pole ,one way ,5 Amp 230 volts ,fixed in repairs all including taking down old UNSV switch any type and connecting up complete all as specified & directed.

S&F switch piano flush type single pole ,two way ,5 Amp 230 volts ,fixed in repairs all including taking down old UNSV switch any type and connecting up complete all as specified & directed.

S&F switch piano flush type single pole ,one way ,15 Amp 230 volts ,fixed in repairs all including taking down old UNSV switch any type and connecting up complete all as specified & directed.

S&F switch bell push type single pole ,5 Amp 230 volts ,fixed in repairs all including taking down old UNSV switch any type and connecting up complete all as specified & directed.

S&F socket outlet for 2&3 pin, 5 Amp flush type 230 Volts ,fixed in repairs all including taking down old UNSV socket any type and connecting up complete all as specified & directed.

S&F socket outlet for 2 in 3 pin 15 Amp flush type 230 Volts ,fixed in repairs all including taking down old UNSV socket any type and connecting up complete all as specified & directed.

S&F electric bell Ding Dong type AC,230 Volts ,single pole ,fixed in repairs all including taking down old UNSV bell any type and connecting up. Make : Havells, Cona, Anchor or equivalent.

S&F angular/batten lamp holder, polycarbonate body with back plate suitable for batten fitting ,fixed in repairsall including taking down old UNSV holder any type and connecting up complet all as specified & directed.

S&F electronic, stepped up & socket type fan regulator ,0-4 step of cap. 100 watt ,230 volts AC,fixed in repairs all including T/D old UNSV regulator any type and connecting up complete all as specified & directed.

S &F ceiling rose surface bakelite 65x50mm ,two or three terminals ,fixed in repairs all including taking down old UNSV switch any type and connecting up complete all as specified & directed.

S&F MCB 32 to 63 Amps ,SPN, 230 Volts fixed in repair all including taking down old UNSV MCB any type and connecting up.

S&F MCB 6 to 32 Amps ,SP,230 Volts fixed in repair all including taking down old UNSV MCB any type and connecting up.

S&F MCB 32 to 63 Amps ,TPN,415 Volts fixed in repair all including taking down old UNSV MCB any type and connecting up.

Material and labour for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.30mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/ equipment and testing on completion including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre,charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore 3.00 metre long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided on CI frame etc complete all as specified & directed & including taking down earth plate.

S&F sealed dry type battery Cap. 65 AH 12 volt type Make -Exide model Powersafe Plus No EP 65-12 & taking down old U/S battery all as specified and directed. Make : Luminous,Exide or equivalent.

Servicing of UPS 10 KVA by blower in existing location ,open connection checking the IC and including replacement of U/S spare parts if any Mass Pad,control card,power card etc complete all as specified and directed by Engineer-in-Charge

Supply, laying, jointing and testing XLPE insulated armoured heavy duty LT under ground electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 16 sqmm 2 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc complete all as specified & directed. Note : Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately.

Supply, laying, jointing and testing XLPE insulated armoured heavy duty LT under ground electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 10 sqmm 2 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc complete all as specified & directed. Note : Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately.

Supply and Fixing LED Bulb energy saving 10/11 W complete all as specified and directed Make :- Havells/Crompton/Syska

Excavating in trenches not exc 1.5 metre wide and not exc 1.5 metre in depth for foundation or for shafts, walls, manholes, laying of cables, pipes etc not exc 10 Sqm on plan and getting out in soft/loose soil.

Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25 cm thick in soft/loose soil.

Removal of excavated soil/ material to a distance not exc 50 metre and depositing where directed at a level not exc 1.50 metre above the starting point complete all as specified.

M&L for brick work with FLY ASH BRICKS(As Per IS-13757(1993) burnt clay fly ash building bricks), (OLD SIZE BRICKS) with width equal to the length of the brick laid dry & flat abutted with each other with gap between adjacent bricks not exc 10 mm over UG cable for protection and complete all as specified & directed.

M&L for dry sand and punning for cushioning to under ground cable all as directed. Note :- For the purpose of payment only punned thickness shall be measured.

M&L for GI pipe (Light grade) for protection of LT cable fixed to walls/ poles/road crossing including clamps complete of 40 mm bore as specified & directed.

S&F in renewal PVC Rectangular box with 5A flush type 2 in 1 switch socket combination complete all as specified and directed.

S&F in renewal PVC Rectangular box with 15A flush type 2 in 1 switch socket combination 240 V complete all as specified and directed.

S&F in replacement 3 pin 15 Amps Plug Top 250 Volts heavy duty complete all as specified and as directed.

S&F in replacement 3 pin 5 Amps Plug Top 250 Volts heavy duty complete all as specified and as directed.

S&F in renewal LED light fitting 10 Watt 2 feet mirror light luminarire with poly carbonate cover complete with all acessories and driver including connections with with 3 core copper wire of suitable size complete all as specified and directed.

S&F in replacement of unserviceable 10 Sqmm aluminium service wire 2 core fixed to wall/ceiling using clamps of suitable size including removing the existing for replacement complete all as specified and as directed.

S&F in replacement of unserviceable 6 Sqmm aluminium service wire 2 core fixed to wall/ceiling using clamps of suitable size including removing the existing for replacement complete all as specified and as directed.

S&F in replacement of unserviceable 4 Sqmm aluminium service wire 2 core fixed to wall/ceiling using clamps of suitable size including removing the existing for replacement complete all as specified and as directed.

S&F in replacement of unserviceable 2.5 Sqmm aluminium service wire 2 core fixed to wall/ceiling using clamps of suitable size including removing the existing for replacement complete all as specified and as directed.

S&F in renewal LED light fitting, 1X25 watt, complete with tuff net glass protection IP:66, fixed to walls with GI bracket made out of suitable size of light grade pipe 32 mm dia tubing upto 1.2 mtr length bent to shape with 02 sets of MS clamps made out of 25x3 mm MS flat iron with suitable bolt and nuts and testing etc complete all as specified and directed.

S&F 3 watt metal and synthetic LED bedside flexible reading lamp. The lamp shall be of warn white/yellow light with dimensins 5.5cm x 5.5cm x 14.6cm with two year manufacturer warranty. Make : Philips, Havells, Halonix, C&S, Bajaj, Syska or as approved by GE. Note : The quoted rate shall include the point wiring and wiring arrangments required for fixing of the lamp including labour rate adn other misc charges.

Supply & fix in repair recess type, 36 watt LED panel light (600x600 mm) complete with fittings integrated electronic driver,energy efficient, 230 volts,co- related colour temperature (CCT) of 6500K, warm white/ cool white/natural white complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Enginee-in-Charge. MAKE- havels, philips, bajaj

Supply and fixing in replacement of unserviceable garden lights with LED landscape luminaires 10 Watts pressure die cast powder coated housing with PC diffuser,Efficient high output COB for garden, Pathway lightning, IP 66 protection complete all as specified and directed.

S&F in replacement of unserviceable 35W LED Post top made in cast aluminium spigot housing with decorative opal acrylic diffuser and IP65 protection complete with all accessories suitable for connection of copper wires complete all as specified and directed. Make : Crompton, Model - Maple, Cat Part No.: LPT0 - 40 - CDL, 40W LED or Equivalent type in Bajaj / Havells/ Philips / Wipro

Supply and fix in replacement Intelligent, flexible & smart outdoor lighting control unit for automatic switch ON at dusk automatic switching OFF at Dawn with Astronomical Time Switch, high voltage and low voltage protection, 3 Pole / 230V For 12 KW load equally distributed over 3 phases. Minimum IP54 Degre of Protection. Make - IndoAsian, Model - TimeLite, Cat Ref TL065AS0 or Equivalent as Approved by GE.

Supply and fixing of 45watt Inverter LED Light with IR Sensor for automatic On-Off of street light and shall have inbuilt Li-on battery for 90mins power backup in case of power failure. Housing of fixture shall be presurre die cast and system efficacy >100LPW, CRI >70, CCT 5700K, PF>0.9, THD<15%. Make: Halonix Cat. Ref. HLSLD-ML04-45-CWL-INV-DIMM-IRSEN-R or equivalent

Supply only surge protector 10 kA with IP 65 protection, as per IS

Supply only driver suitable for 45 watt LED with IP 65 protection, as per IS

Supply only driver suitable for 60 watt LED with IP 65 protection, as per IS

Supply only driver suitable for 90 watt LED with IP 65 protection, as per IS

Supply Installation Testing and Commissioning in replacement of Lithium based Solar LED Security light System with built in Battery and PV Panel and LED lamp in FRP/Aluminium body including taking down of old unserviceable light fitting of any size/capacity complete. System Comprises Followings”. (a) PV Panel 30W Monocrystalline. (b) Lithium Cell for back up 15.4AH with inbuilt BMS. (c) High brightness W-LED lamp 16W, CRI>700, CCT6500K. (d) Microcontroller based charge controller cum driver with automatic dimming function, Dusk to Dawn Operation. (e) Working temperature: (-) 10°C to (+) 55°C. System should be supplied with adjustable MS clamp and 40mm dia arm suitable for pole/wall mounting complete with satisfaction of Engineer In Charge.

S&F flexible LED strip light (with multiple colour option), waterproof IP65, outdoor type having low heat emission, thick copper wire, high surge protection upto 3.5kv with wattage not less than 7 watt per meter with 96 LED per meter complete all as specified and directed

shiva construction (BID ID -3450771)