REPAIRS TO SEEPAGE LEAKAGE AND OTHER MISC B R WORKS IN OTM MD ACCN IN BANASWADI AREA IN THE AOR OF AGE B R MEG UNDER GE N BLORE

Amount

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and as directed

Dismantling timber scantlings 40 sq. cm and over in section, in any position as in Framed work etc complete all as specified and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed

Demolition of brick work /stone masonry/PCC block masonry built in cement mortar of any description all as specified and directed.

Demolition of cement concrete and paving not exc 15 cm thick (below or above ground level) complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and as directed

Dismantling of Stone set paving of any description or thickness in floors, aprons etc (Laid bedded and pointed in any cement mortar) incl removing off the premises etc complete all as specified and as directed

Taking down cement plaster of any description hacking for key or raking out joint on old brick work/stone/concrete surface etc complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each, including cutting holes for removing the hold fast etc (Distrubed surface of wall shall be make good by the contractor. The rate quoted shall be deemed included for the same) complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4 Sqm each, including cutting holes for removing the hold fast etc (Distrubed surface of wall shall be make good by the contractor. The rate quoted shall be deemed included for the same) complete all as specified and as directed

Taking down shutter of any description area exc 1.00 Sqm but not exc 2.00 sqm each etc complete all as specified and as directed

Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 20mm dia bore complete all as specified and as directed

All as per item No 1.012 above but 25 mm dia bore

Dismantling of cast iron or reinforced concrete drain/PVC soil waste pipe up to 150mm dia incl fittings, jointed in cement mortar and taking out trenches if reqired etc complete all as specified and directed

Dismantling water tanks exc 500ltr but not exc 1000 ltr and removing to store etc complete all as specified and as directed

All as per item no 1.015 above but exc 1000 ltr & not exc 2000 ltr capacity

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads etc complete all as specified and as directed

M&L Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410 -W (Gde- E- 250) quality-A etc including box section etc complete all as specified and as directed

S&F Hollow steel section for structural use in beams, col, rafter purlins or other connecting plates incl necessary welding, riveting, nut bolts as per IS-4923 etc complete all as specified and as directed

M&L Hollow /solid steel section for structural as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to IS-4923 etc complete all as specified and as directed

S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/ cladding to wall, fixed with self tapping screws etc complete all as specified and as directed

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/cladding/ridges / valley to wall, fixed with self tapping screws etc complete all as specified and as directed

S&F False ceiling with grid suspended system of size 600X600mm standard section consisting of main runner 29X24.70X0.80mm, cross Tee 29X24.70X0.80mm and wall angle 22.2 X22.2X0.65, ceiling suspended with 3 mm dia GI wire hanger fixed with steel dash fastner, butter fly clips, hold down clips etc (Main corner, cross tee& wall angle of MS galvanized with PPPCGS) incl 4 mm thick HPSC self textured design pre primered non asbestons fibre cement building boards fixed to false ceiling including taking down old existing ceiling of any description complete all as specified and as directed

M&L for 8mm Seamless calcium silicate ceiling, (size as decided by Engr-In-Charge) board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish including Gl frame work of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners etc complete including taking down old existing ceiling of any description complete all as specified and as directed

M&L for preparing POP false ceiling and applying two coat of plastic emulsion paint over a coat of primer etc complete all as specified and as directed

M&L providing cement concrete type B0 1:2:4 (12.50mm graded stone aggregate) in copings, parapets and railing upto 60cm height, leveling concrete for Roof slab, kerbs, water troughs/Chajjas and the like including weathering, slightly rounded or chamfered angles and throating as directed

M&L for rendering 10 mm thick in CM (1:3) on fair faces of brick work or concrete surface mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately

M&L for removing all loose gravel, dirt, oil, grease and foreign materials by jet or dry air, cleaning the surfaces mechanically or by grinding to make it smooth and APP modified water proofing membrane as per IS 1654-2017/IS 16352-2017, 3mm thick and weighing not less than 3.60kg/Sqm reinforced with non woven polyster/HMHDPE matt black finished over compatible primer/bonding bitumen @ 0.40 Litr/Sqm and torch applications of membrane with 75mm side overlap and 100mm end lap after necessary preparation of surface complete as per manufacturer's instructions and applying a coat of solar reflective bituminous aluminum paint on top @ 0.10 litre/sqm complete all as specified and directed incl taking down existing roof treatment of any types incl HP clay tiles etc along with cement plastering etc complete all as specified and directed.

M&L for 75 mm thick cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in sub base of flooing etc complete all as specified and as directed

M&L for 25 mm thick Cement concrete type B-0,1:2:4 (12.5mm graded aggregate) as in levelling course of flooing etc complete all as specified and as directed

M&L for screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed.

M & L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm,, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed

M & L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed

M & L for Matt Finished Non - skid Ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed

M&L for 18 to 20mm thick granite Granite stone slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granit including grinding the edges half round and polishing including etc complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface as backing coat of dado/skirting etc complete all as specified and as directed

M&L Glazed ceramic coloured tiles 300X450X7mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as specified and and as directed

M&L for 75 mm thick PCC 1:3:6, type C-1, using 20 mm graded aggregates as in plinth protection etc, finished even and smooth without using extra cement complete all as specified including joints filling with sealing compound Grade "A" complete all as specified and directed.

M&L for exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc. complete all as specifed and as directed

M&L for M Sand Cushioning for Paving Block tiles etc complete all as specified and directed

M&L for machine presssd pre-cast concrete interlocking coloured paving Block of glass fibre reinfoced glossy finished vibro compacted any shape and size confirming to IS-15658-2006 of 60 mm thick, M-35 grade to match with grey cement and pigment etc complete all as specified and as directed

M&L Pre-cast Cement concrete Type 1:3:6 using (20 mm graded stone aggregates) with solid blocks, exc 10 cm in width and setting in CM 1:6 all as specified and directed.

M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete / Stone masonry surface finsihed even and smooth (without using extra cement) etc complete all as specified and as directed

M&L for rendering 15 mm thick in CM (1:4) on other than fair faces of brick work or concrete/stone masonry surface finsihed even and smooth (without using extra cement) mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately

Supply only liquid water proofing compound

S&F 1.25 mm thick pressed steel frame of size 125 X 60 mm for door with one or more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed

S&F 35mm thick flush shutter solid core construction with decorative choice lamination both sides of shutter, kiln seasoned and chemically pressure treated complete all as specified and as directed

M&L for cement concrete 1:3:6 type C-1 (using 20mm graded aggregate) as in hold fast and filling of pressed steel chowkat etc complete all as specified and as directed

S & F for solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete as sepecified and directed (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on back face etc. complete all as specified and as directed.

S&F Powder Coating (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified and as directed

S&F Powder Coating (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, fixed/Sliding type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified complete all as specified etc. complete shall as specified and as directed Note - Wire Cloth & Glass shall be measured and paid separately under respective items.

S&F Powder Coating (minimum thickness of powder coating 50 micron) aluminium door shutters, aluminium section weighing not less that 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. Note - Glass and particle board shall be measured and paid separately under respective items.

S&F 8 to 9 mm prelaminated particle board, exterior grade, with both side decorative choice lamination & fixed with screws in Door / Partiton work etc omplete all as specified and as directed

S&F aluminium Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repairs

S&F 150 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor etc complete all as specified and as directed

S&F 150 mm long Aluminium anodised tower bolt of extruded section etc complete all as specified and as directed

S&F 100 mm thick stainless steel butt hinges, heavy weight, and fixed etc complete all as specified and as directed

S&F 150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed

S&F aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and as directed

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed.

All as per item no 1.061 above but fixed in repairs Notes : Replacement of wire cloth reqd to be carried out in Steel / Wooden window & at hts exc 3.00mtr & not exc 10.00mtr height. Contractor shall make arrnagement of Scaffolding, saftey measure etc, wooden/ FI as in beading for fixing of wire cloth, welding machine etc. Nothing extra shall be admissible on on this account

S & F 5.5mm thick tinted sheet glass and glazing with oil putty in squares exc 0.5 sq. m in each pane etc complete all as specified and as directed

S&F 4mm thick sheet Glass, Ordinary qulatity and glazing with oil putty in squares in not. exc 0.5 sq.m in each pane etc omplete all as specified and as directed Notes : Wks reqed to be carried out at hts exc 3.00 mtr & not exc 10.00 heights. Contractor shall make arrnagement of Scaffolding, saftey measure etc, nothing extra shall be admissible on on this account

S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares in not. exc 0.5 sq.m in each pane etc omplete all as specified and as directed Notes : Wks reqed to be carried out at hts exc 3.00 mtr & not exc 10.00 heights. Contractor shall make arrnagement of Scaffolding, saftey measure etc, nothing extra shall be admissible on on this account

S & F 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified.

All as per item No 1.066 above, but 25 mm dia of bore pipe

M & L rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I capacity of tank 2000 ltrs complete all as specified and directed

All as per item 1.068 above, but 1000 ltr capacity

S & F 25 mm dia of bore ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed [Minimum weight for 20 mm – 210 gms] .

S & F in repairs 25 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and including taking down old gate valve all as specified and as directed.

S&F in repairs vitreous china wash basin white, flat back, size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but including brackets, 32 mm bore waste stainless steel coupling and LDPE pipe 600 mm long complete all as specified and directed.

S & F in repair vitreous china wash down water closet pan (Pedestal Pan) including fixing bolts, flush pipe anti syphonage pipe, plastic water closet seat , black closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device etc complete of cera model cat pt no. 2008 incl plastic EWC seat cover, coloured closed pattern with flat bottom and cover of cera model cat pt 2308 and mild steel chromium plated or aluminised hinging device etc complete all as specified and as directed

S&F in repairs viterous china squatting pan orrisa pattern of size 580X440 mm white with integral foot rest 'P' trap including connecting to trap incl S trap or P trap and flush pipe anti-syphonage pipe etc complete all as specified and as directed

S&F in repairs Viterous China urinals, bowl type (back or corner wall type), complete fixed in repairs including providing and fixing plugs, beddings urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe.

S&F in repair PVC flushing cistern with flush out valve low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets, etc complete all as specified and as directed

S&F in repair 15mm dia Pillar tap PTMT fancy type any long body colour screwed, for iron pipe etc complete all as specified and as directed

S&F in repair 15 mm bore dia Bib tap fancy type long body standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 120gms)

S&F in repairs 125 mm dia bore Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms)

S&F in repair 15mm dia stop cock / angle / Concealed cock PTMT fancy type any colour screwed, for iron pipe and fixed etc complete all as specified and as directed

S & F PVC connection 15 mm size with PTMT nuts of length 450 mm, all as specified and as directed.

S&F PVC urinal waste pipe 32mm dia 800mm long, complete all as specified and directed

S&F in repairs 75 mm dia bore PVC (SWR) multi floor trap with grating including jointing with solvent cement etc complete all as specified and as directed

S&F 110mm PVC, SWR pipes, single socketed in any length with rubber ring joint leaid in trenches or in floor complete all as specified and directed

All as per item No 1.086 above but fixed with wall complete all as specified and directed

S&F PVC bends (any radius) of 110mm dia with access door etc complete all as specified and as directed

S&F PVC vent cowls of 110mm dia etc complete all as specified and as directed

M&L for 15 mm thick in cement mortar 1:3 mixed with water proofing compound and finished even and smooth without using extra cement on concrete slab and sides of sunken portion etc complete all as specified and as diredted

M&L for applying a uniform coat of blown grade bitumen VG-10 @ 1.20 Kg. Sqm confirming to IS-702 over a coat of primer @0.70 Kg/ Sqm over concerte slab and sides of sunken portion etc complete all as specified and as direction

M&L for providing water proofing treatment to sunken portion of WCs, bathroom etc by applying cement slurry mixed with two component Elastomeric Acrylic based polymer modified cementitious composite compound coating of make as approved in TI 5/2003. The following procedures to be adopted during the execution of work :- (i) First layer of slurry of cement @ 0.488 kg/sqm mixed with Acrylic based polymer modified cementitious composite compound @ 0.253 kg/sqm. The layer will be allowed to air cure for 4 hours. (ii) Second layer of slurry of cement @ 0.242 kg/sqm mixed with with Acrylic based polymer modified cementitious composite compound @ 0.126 kg/sqm. The layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (iii) 20mm thick screed in cement mortar 1:3 mixed with liquid water proofing compound. (iv) Provide 40mm dia light grade GI spout at the lowest point with 30cm projection beyond the out face of the wall.

M&L cement concrete 1:5:10 type E-2 using 20mm granded brick aggregates as in sunken portion of WC etc complete all as specified and as directed

M&L for preparing newely plastered surface of wall and applying two coat of cement base paint over a coat of primer etc complete all as specified and as directed

M&L for Preparing new plastered suface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of primer etc complete all as specified and as directed

M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed

Complete removal of existing treatment by means of wire brushing, sand paper, manually or mechanically up to visible of plastered surface incl rubbing and washing etc complete all as specified and as directed

M&L for 1mm thick wall care putty on wall including preparation of surface with sand paper etc to obtain smooth surface etc complete all as specified and as directed

M&L for Preparing Old Plastered suface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of primer etc complete all as specified and as directed

M&L for Preparation of old treated plastered or unplastered wall surfaces of any description including brooming down with steel wire brushing scrapping down smoke soot’s, moulds, moss and efflorescence, salts, trading oil and greasy spots and filling holes with wall care putty including scrubbing with sand paper to obtain smooth surface of wall etc and applying one coat of oil bound emulsion distemper of approved tint complete all as specified and as directed.

M&L for Preparing Old ceiling surface and applying one coat of white wash etc complete all as specified and as directed

M&L preparation of old painted surfaces of steel surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed

M&L Preparing old wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic Enamel paint etc complete etc complete all as specified and as directed

Removing building materials etc. distane exc 1.50KM but n.exc 5.00KM (other than spoil) beyond the lead included in the rates, including loading, unloading and stacking at the destination etc complete all as specified and as directed

Janatha Trading Corporation

Omkar Constructions

PRACHANIVA CONSTRUCTIONS

D NAGI REDDY

deepak kumar vishwakarma

Sreyas Enterprises

Shanmuga Constructions

ShaikPyarejanandsons